summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-09-13U-boot: Modified memargs512.Robert Fekete
Moved pmem@ from 176 to 172. ST-Ericsson Change ID: ER271400 Change-Id: Ic1fa12b4417822b0c0597169666c242631d4ada7 Signed-off-by: Robert Fekete <robert.fekete@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4967 Reviewed-by: Nils CALMSUND <nils.calmsund@stericsson.com> Tested-by: Nils CALMSUND <nils.calmsund@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-08-31prcm: fix DB8500v2 TCDM base address and I2C chip idRabin Vincent
Handle the changed TCDM base address on DB8500v2, and the required chip bits to the I2C slave address. Based on the Linux modifications. Change-Id: I9fc8df1553824bd03a908a5c4285be284ea158db Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4213 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-08-30Make U-Boot restartable and crash dump supportMichael Brandt
* Added an u8500 board specific ld script. Reserve space for .data backup. * Make a backup copy of initialised data (.data section). If restarted, copy the backup data back to .data. * Create crashkernel env variable dynamically, since it depends on U-Boot start address. For dumping U-Boot itself is used as crashkernel. * Set preboot environment variable to checkcrash command, if data_init_flag > 0, i.e. we were restarted e.g. by kexec. * Added crashkernel parameter to common bootargs. Decreased environment and pool sizes. * Changed link address of U-Boot: moved it 32 K up for kdump info to 0x05608000 * Added "checkcrash" command This command checks if there is a pending crash dump and writes it to a file on SD/MMC. ST-Ericsson ID: WP264488 Change-Id: If545822e424b95532f1128afb0e762b6b73834e9 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3011
2010-08-30u8500 board code modifications for Rockbox FATMichael Brandt
board/st/u8500/u8500.c - added errno include/configs/u8500.h - added Rockbox related CONFIGs ST-Ericsson ID: WP264488 Change-Id: I417c6acd23b365a121c898533f93e4f84bfb92e0 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3010
2010-08-30Read/write VFAT support from Rockbox-3.3 FAT stackMichael Brandt
Add read/write VFAT support from Rockbox-3.3 FAT stack. It should be also applicable to the unmodified 2009.11 U-Boot release. Note that is was taken as is from Rockbox and from a older U-Boot Rockbox patch. "checkpatch" shows very many coding style errors and warnings, but it is tedious work to clean this up. To make this patch work an additional mmc_block_write() board support routine and the errno variable are needed. Furthermore following defines in the board config header file: #define CONFIG_ROCKBOX_FAT 1 #define CONFIG_U_BOOT 1 #define CONFIG_SUPPORT_VFAT 1 #define CONFIG_CMD_TREE_FAT This will be added in a follow-up patch. This patch is based on the patch from Etienne Carriere <etienne.carriere@stericsson.com> for the U671x U-Boot: This commit adds FAT write support to u-boot native read-only FAT code. Commit initially applied on u-boot-v2009.01 (SHA1: 72d15e705bc3983884105cb7755c7ba80e74a0a5) Based on FAT stack dumped from Rockbox package v3.1 (www.rockbox.org). Based on initial Rockbox FAT stack integration in u-boot by Keith Outwater (outwater@comcast.net). Current porting is aligned with Rockbox v3.3 FAT stack. Enable upon config switches: CONFIG_CMD_FAT CONFIG_ROCKBOX_FAT CONFIG_CMD_TREE_FAT (recommended) CONFIG_SUPPORT_VFAT (recommended) C code APIs (from U-boot native FAT support): int fat_register_device(block_dev_desc_t *dev_desc, int part_no); long file_fat_read(const char *path, void *buf, unsigned long maxsize); int file_fat_ls(const char *dirname); int file_fat_detectfs(void); C code APIs (added by Rockbox FAT support): long file_fat_write(const char *path, void *buf, unsigned long maxsize); int file_fat_rm(const char *path); int file_fat_rmdir(const char *path); int file_fat_mkdir(const char *path); int file_fat_cd(const char *path); int file_fat_pwd(void); int file_fat_mv(const char *oldpath, const char *newpath); unsigned int rockbox_fat_free(unsigned long size_kbyte); unsigned int rockbox_fat_size(void); Use "help fat" from u-boot console to see available commands. ST-Ericsson ID: WP264488 Change-Id: I9afc29ecb80f9152bd8534bbf11e47e54cfad796 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3009
2010-08-30U-boot: MMC update.Martin LUNDHOLM
MMC has been updated with several improvements. Primarily MMC performance has been improved by using assembler code for low level FIFO handling. Also some MMC functionality has been added, e.g. support for DDR and reliable write. Data and command delay times were incremented, otherwise hangups and timeouts were observed. Tested on HREF+ 1.1 V21 and HREF+ 1.1 V32 (Micron PoP). Following WP depends on this change (more reliable SD card write support): ST-Ericsson ID: WP264488 Change-Id: Ic92abffe1640aa9375b8d43a6b8522ca8296a368 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4056 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-08-25Align memory regions in memory map to 8 MBDan Johansson
This patch aligns the start address and size of all mem regions to 8 MB. Note that there is 2 MB unused memory starting at 198M. ST-Ericsson Change-Id: ER268677 Change-Id: Ia93953b0ff0af788c75ce378cdae96a23361455f Change-Id: I5dc74519b6a12431407e918cfe5552969793ec5b Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4054 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Tested-by: Dan JOHANSSON <dan.johansson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-08-20ux500: add DB8500v2 supportRabin Vincent
- Add cpu_is_u8500v2() for identification: ASICID has moved, so use the MIDR for primary identification. - Handle the changed MTU0 enable bit - Handle the MMC DBLOCKSIZE field move ST-Ericsson ID: CR267426 Change-Id: Ieae6032cf4e96796a8b53cfb95b28b26d4cf9a7b Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3960 Reviewed-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-08-11Replace MMC/SD driver to fit new framework.Ulf Hansson
IR265772: MMC driver does not detect SDHC cards. IR254201: Restructure MMC/SD driver for U8500 board according to the block device framework in mainline U-Boot. Changes to mmc framework: - Multi Block Read support in mmc framework. - Wrap Multi Block Write/Read to be able to adopt for large transaction. - Removed incorrect check in EXT CSD for high capacity MMC. - Corrected check for high capacity SD cards. - Set MMC buswidth to 8, prio of using 4. Known limitations/bugs in mmc framework: - High capacity MMC, will likely not get the correct density. - High speed is set, whether or not the host supports it or not. board/st/u8500/mmc_utils: IMPORTANT FOR DEVELOPERS: - Removed unessary U-Boot commands which is already supported in cmd_fat. - mmc_read_cmd_file: Read command.txt into bootcmd env from FAT FS in SD card. - write_partition_block: Writes the MBR if it is not already written. board/st/u8500/mmc_host[c.h]: - Implements the entire MMC/SD host driver for the PL180 block. - There is still room for optimization: Increase CLK-speed. Use high-speed for SD cards. Is GPIO setup correctly for both cards an eMMC. EarlyDrop support not fully tested. Dynamically turn on voltage/clocks to SD, not always. More... Note: - Increased read/write performance for eMMC, to around 5.4 MB/s for sequential read/write. Earlier measurements was 3.5 MB/s for read and 2.6 MB/s for write. ST-Ericsson ID: ER265772, CR267996, ER267993 Change-Id: I921102edbde761407ff5ad476d1bb99f5dc7a2ef Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2288 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com> Tested-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com> Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com> Tested-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
2010-07-23boottime: Minor clean up and added u-boot command for displaying the current ↵Jonas Aaberg
boot time status. Change-Id: Ifdfea22cc1d587469a18b22a20c0dc14aeaa49c9 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2502 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-07-23Boottime changes. Moved generic boottime code from lib_arm to common. ↵Jonas Aaberg
Boottime now internally uses us instead of ticks. Reviewed-by: Michael Brandt <michael.brandt@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Change-Id: If30d2eb384d6e82daa86c3cab7a6fd2a22baefb5 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3053 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-07-19Applies vibrator support for U-boot.Grzegorz Sygieda
This implements vibrator feature using AB8500 chip and I2C i/f. The vibrator driver provides shell command "vibrate". Checked with HREFP boards: 1.1_V21, 1.1_V31, 1.1_V33 ST-Ericsson ID: AP266348 Change-Id: Ifd0d780b41c4285038b8de659cdeac2086b8e873 Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2937 Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-07-12MCDE: Adds support for more display typesJimmy Rubin
This patch does the following: * Adds configs to set display xres and yres in u8500.h * Adds config to set display voltage in u8500.h * Changes default settings for dsi / dsi pll clocks ST Ericsson Change-ID: AP264669 Change-Id: I9277167e690ece6569fa39d9e2e9e4c7c1473006 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2587 Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-07-07memory bootargs changeMichael Brandt
Related to ER 265783 "Existing SI memory map no more compatible for MM" and ER 260608 "VC: Black incoming call screen". The Linux kernel and graphics memory parameters have changed. Furthermore there are different layouts for 256 MB and 512 MB SDRAM resp. With this change U-Boot detects dynamically the memory size by making some fixed assumptions about the memory chip and controller and by reading the number of actually used rows and columns. It then sets the environment variable memargs to add either memargs256 or memargs512 to "bootargs". "memargs256" and "memargs512" are stored in the U-Boot environment area. The default values are set in include/configs/u5000.h Also the default uImage copy size was increased from 2 MiB to 3 MiB, since the released uImage size is close to 2 MiB and some developers uImage is already above. Tested with HREF ED (256 MB) (LBP only), HREF 1.0 V20 OM (256 MB) and HREF+ 1.1 V31 (512 MB). Erase the U-Boot environment first, if you want the new settings. ST-Ericsson ID: ER265783 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Change-Id: I2467c9e410738a3655fc0fd25548cd6f4eb8351c Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2464 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Per-Daniel OLSSON <per-daniel.olsson@stericsson.com> Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com>
2010-06-10Adding support for startup graphicsJimmy Rubin
This patch does the following: * Startup graphics only support for HREF+. * Displays a logo last in the u-boot sequence before the kernel is booted. * Informs the kernel not to display penguins. * Added pmem values to bootargs. ST Ericsson Change-ID: WP236570 Change-Id: Ib176c17a795ddd002e94344eb9c67739b1e2269e Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/1048 Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-06-10Add TC35892 I2C GPIO expander driverRabin Vincent
Add a simple driver for the I2C-controlled TC35892 GPIO expander. Change-Id: I49389d808353ca6b43cc38e1c7518de38f14ef51 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/1047 Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-05-24Use proper copyright linesRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Change-Id: Ieec8e7940e7acdc88d7c17b12007f61841741325 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/390 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-05-24HREF+ SD supportRabin Vincent
On HREF+, SD card power supply is controlled by the Vaux3 regulator. In order to enable the power supply, port the AB8500 PRCMU I2C read/write code from Linux to U-Boot, and then write the appropriate registers via those functions. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Change-Id: I470f3da694e6ea0e3e0e16571c3048066f0a4309 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/388 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-05-19remove rootfstype from bootargsMichael Brandt
This patch is part of WP254081 which depends on WP252006. Remove rootfstype from bootargs and rely on rootfstype auto detection. Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Change-Id: I1f951b90d4bed6825e73d7cd206721737637f181 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/184 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-05-19HREF V1 updatesMichael Brandt
This patch is part of WP254081 which depends on WP252006. * Fixed I2C, use real timeouts instead of counter * Undefined CONFIG_BOOTTIME, since it as to be changed to new timer.c * Merged V1 patches from Bangalore The patches were merged manually, because of the differences of the U-Boot baseline (Bangalore U-Boot 1.3.1, Lund 2009.11). The original patches were created by Rabin Vincent <rabin.vincent@stericsson.com>. and were applied originally to Branches: blr_lsp, remotes/origin/blr_lsp Follows: qpppaaa_20100210_094651 0001-u8500-gpio-add-I2C0-altfun.patch 0002-u8500-use-correct-v1-macros.patch 0003-emmc-clean-up-paritioning.patch 0004-u8500-remove-incorrect-ram-settings.patch 0005-u8500-gpio-remove-unnecessary-ifdefs.patch 0006-u8500-add-ED-v1-detection-and-handle-eMMC-diff.patch 0008-u8500-mmc-don-t-disable-altfuns.patch 0009-u8500-gpio-remove-unused-defined.patch 0010-u8500-mmc-add-barrier-for-while-loop.patch 0011-u8500-mmc-handle-non-block-addressed-cards.patch 0012-u8500-mmc-remove-unused-gpio-settings-on-v1.patch 0013-u8500-emmc-build-fix.patch 0014-u8500-handle-v1-gpios-and-clocks.patch 0015-mmc-build-fix-for-block-addressing.patch 0016-u8500-add-clocks-and-hardware-files.patch 0017-u8500-enable-PRCUM-timers-reg-for-ED.patch 0018-u8500-handle-MTU-for-v1-ED.patch 0019-u8500-emmc-remove-unnecessary-GPIO-settings.patch 0020-u8500-remove-dead-code.patch 0021-u8500-add-working-MTU-timer.patch 0022-pl011-empty-rx-fifo-if-necessary.patch 0023-u8500-gpio-fix-cont-handling-in-altfunc.patch 0024-u8500-reduce-bootdelay-to-1-and-enable-zero-check.patch 0025-u8500-disable-forcing-of-verify-but-set-n-by-default.patch 0029-u8500-fix-some-gpio-settings.patch 0030-emmc-make-v1-paritioning-differences-explicit.patch Signed-off-by: Michael Brandt <Michael.Brandt@stericsson.com> Change-Id: I1106702e393c34f630e71f071e06c3952b0d3a1a Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/182 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-05-19General I2C refactoring and environment settings cleanupMichael Brandt
These are the patches for WP252006. There will be a follow-up patched for WP254081. Environment settings * board_id bootargs parameter from board_id environment var set in board_late_init(). * decreased bootdelay to 1 second * added check for keypress on bootdelay==0 * removed preboot command and introduced "run cmdfile" instead * changed rootfstype from ext2 to ext3 General I2C refactoring * include/configs/u8500.h: Enabled i2c command line commands. Changed environment settings to use board_id as set in board_late_init(). Added I2C address and configuration defines. * board/st/u8500/Makefile: Replaced i2c.o with u8500_i2c.o. * board/st/u8500/gpio.c, gpio.h: Added I2C busses to altfunc_table. * board/st/u8500/init_mmc.c: removed config_extended_gpio() and therefore I2C references. GPIOE settings are now in board_late_init(). * board/st/u8500/u8500.c: Removed I2C/SD gpio settings from addr,value array. board_late_init(): Determine and set board_id environment variable 0: mop500, 1: href500 Above boards have different GPIO expander chips which we can distinguish by the chip id (1 and 3). The board_id environment variable is needed for the Linux bootargs. Signed-off-by: Michael Brandt <Michael.Brandt@stericsson.com> Change-Id: I4c2cab28c1cb74692e0c72b2daa422e97787ff8d Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/167 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-01-13Merge branch 'master' of http://git.denx.de/u-bootMichael Brandt
2010-01-13Updated timing measurement structure, changed atags and added idle time ↵Jonas
measurement. Note: idle time measurement does not seem to work reliable at the moment. Verification needed. Signed-off-by: Michael Brandt <Michael.Brandt@stericsson.com>
2010-01-12Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-01-12Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
2010-01-12Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-01-09Adds EHCI definitions to sequoia board configuration file.Chris Zhang
Adds required definitions for EHCI support in sequoia configuration file. But still keeps the OHCI as default driver. Signed-off-by: Chris Zhang <chris@seamicro.com>
2010-01-09usb: musb: add support for Blackfin MUSBBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-01-09DA830: Add usb configAjay Kumar Gupta
Adding USB configuration. Default is set for USB MSC host. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com>
2010-01-09DA8xx: Add MUSB host supportAjay Kumar Gupta
Tested USB host functionality on DA830 EVM. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com>
2010-01-09DA8xx: Add GPIO register definitionsAjay Kumar Gupta
Added DA8xx GPIO base addresses in gpio_defs.h and pointers to different BANKs which can be used to program GPIOs. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com>
2010-01-07mpc83xx: add support configure bus parkingHeiko Schocher
Add support to configure bus parking mode and master in bus arbitration configuration (ACR). Add this for the kmeter1 port: Configure bus arbiter with recommended values from Freescale to improve bus latency/throughput for application with intensive QuiccEngine activity. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07mpc83xx: Add support for MPC8349 esd caddy2Reinhard Arlt
The caddy2 is a variant of the already supported vme8349. So we just add the differences to this board port. To better support those two boards we switched from fixed SDRAM configuration to usage of spd_sdram(). This is done by providing a board specific SPD EEPROM routine with different values for both boards. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de> changed to use mkconfig -t option instead, plus misc codingstyle fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07mpc83xx: Add NAND boot support for MPC8315E-RDB boardsAnton Vorontsov
The core support for NAND booting is there already, so this patch is pretty straightforward. There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> o silence make during ln echo o update documentation o and avoid: $ ./MAKEALL MPC8315ERDB_NAND Configuring for MPC8315ERDB board... sdram.o: In function `fixed_sdram': /home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay' by renaming udelay -> __udelay in the spirit of commit 3eb90bad651fab39cffba750ec4421a9c01d60e7 "Generic udelay() with watchdog support". Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-06ARM Update mach-typesTom Rix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit c9f937e4a3f4ebf9924ec21d80632e5eb61d949c Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2010-01-05ppc/p4080: Add Corenet Platform Cache (CPC) registersBecky Bruce
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05fsl-ddr: add override for the Rtt_WrDave Liu
Different boards may require different settings of Dynamic ODT (Rtt_Wr). We provide a means to allow the board specific code to provide its own value of Rtt_Wr. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05fsl-ddr: add the override for write levelingDave Liu
add the override for write leveling sampling and start time according to specific board. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05mpc85xx: Add 4-bits eSDHC support for MPC8569E-MDS boardsAnton Vorontsov
Thanks to "Errata to MPC8569E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 0" document, which describes all eSDHC pins, we can add 4-bits eSDHC support for MPC8569E-MDS boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05fsl_law: add SRIO2 target id and law_size_bits() macroLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc: Added macro to test for specific SVR revisionKumar Gala
Various SoC errata are specific to a given revision of silicon. This patch gives us a simple macro to use when doing such tests. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/85xx: Remove CONFIG_SYS_DDR_TLB_STARTKumar Gala
Now that we dynamically determine TLB CAM entries to use we dont need CONFIG_SYS_DDR_TLB_START anymore. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/85xx: Add tracking of TLB CAM usageKumar Gala
We need to track which TLB CAM entries are used to allow us to "dynamically" allocate entries later in the code. For example the SPD DDR code today hard codes which TLB entries it uses. We can now make that pick entries that are free. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/8xxx: Remove is_fsl_pci_agentKumar Gala
All users of is_fsl_pci_agent have been converted to fsl_is_pci_agent that uses the standard PCI programming model to determine host vs agent/end-point. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/85xx: Clean up ATUM8548 PCI setup codeKumar Gala
Use new fsl_pci_init_port() that reduces amount of duplicated code in the board ports, use IO accessors and clean up printing of status info. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05NET: Base support for etsec2.0Kumar Gala
1. Modified the tsec_mdio structure to include the new regs 2. Modified the MDIO_BASE_ADDR so that it will handle both older version and new version of etsec. Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05NET: Move MDIO regs out of TSEC SpaceSandeep Gopalpet
Moved the mdio regs out of the tsec structure,and provided different offsets for tsec base and mdio base so that provision for etsec2.0 can be provided. This patch helps in providing the support for etsec2.0 In etsec2.0, the MDIO register space and the etsec reg space are different. Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into platform specific files. Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/p4080: Added p4080 SERDES registers & USB offsetKumar Gala
Added immap definition for SERDES registers on p4080, the USB offset (since it was missing) and a GPL header. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-04Davinci: NAND enable ECC even when not in NAND boot modeNick Thompson
Davinci: NAND enable ECC even when not in NAND boot mode On Davinci platforms, the default NAND device is enabled (for ECC) in low level boot code when NAND boot mode is used. If booting in another mode, NAND ECC is not enabled. The driver should make sure ECC is enabled regardless of boot mode if NAND is configured in U-Boot. Signed-off-by: Nick Thompson <nick.thompson@ge.com>
2010-01-04Davinci: Configurable NAND chip selectsNick Thompson
Davinci: Configurable NAND chip selects Add a CONFIG_SYS_NAND_CS setting to all davinci configs and use it to setup the NAND controller in the davinci_nand mtd driver. Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-14 00:07:47 +0000