From 2b3f12c214346508cae3f1245808c1ca54c81fdd Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 10 Feb 2009 09:31:47 +0100 Subject: 8xx serial, smc: add configurable SMC Rx buffer len This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN. With this option it is possible to allow the receive buffer for the SMC on 8xx to be greater then 1. In case CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the old version. When defining CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE must be defined to setup the maximum idle timeout for the SMC. Signed-off-by: Heiko Schocher --- README | 2 +- cpu/mpc8xx/serial.c | 94 ++++++++++++++++++++++++++++++++--------------------- 2 files changed, 58 insertions(+), 38 deletions(-) diff --git a/README b/README index fcadf3f0c..56e981d62 100644 --- a/README +++ b/README @@ -487,7 +487,7 @@ The following options need to be configured: - Console Rx buffer length With CONFIG_SYS_SMC_RXBUFLEN it is possible to define the maximum receive buffer length for the SMC. - This option is actual only for 82xx possible. + This option is actual only for 82xx and 8xx possible. If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE must be defined, to setup the maximum idle timeout for the SMC. diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c index bd90dcd3b..972f19096 100644 --- a/cpu/mpc8xx/serial.c +++ b/cpu/mpc8xx/serial.c @@ -65,6 +65,23 @@ DECLARE_GLOBAL_DATA_PTR; #endif /* CONFIG_8xx_CONS_SCCx */ +#if !defined(CONFIG_SYS_SMC_RXBUFLEN) +#define CONFIG_SYS_SMC_RXBUFLEN 1 +#define CONFIG_SYS_MAXIDLE 0 +#else +#if !defined(CONFIG_SYS_MAXIDLE) +#error "you must define CONFIG_SYS_MAXIDLE" +#endif +#endif + +typedef volatile struct serialbuffer { + cbd_t rxbd; /* Rx BD */ + cbd_t txbd; /* Tx BD */ + uint rxindex; /* index for next character to read */ + volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */ + volatile uchar txbuf; /* tx buffers */ +} serialbuffer_t; + static void serial_setdivisor(volatile cpm8xx_t *cp) { int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate; @@ -113,12 +130,12 @@ static int smc_init (void) volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; volatile smc_t *sp; volatile smc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; volatile cpm8xx_t *cp = &(im->im_cpm); #if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850)) volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport); #endif uint dpaddr; + volatile serialbuffer_t *rtx; /* initialize pointers to SMC */ @@ -194,23 +211,26 @@ static int smc_init (void) */ #ifdef CONFIG_SYS_ALLOC_DPRAM - dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ; + /* allocate + * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index + */ + dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8); #else dpaddr = CPM_SERIAL_BASE ; #endif + rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr]; /* Allocate space for two buffer descriptors in the DP ram. * For now, this address seems OK, but it may have to * change with newer versions of the firmware. * damm: allocating space after the two buffers for rx/tx data */ - rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf+2); - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; - tbdf->cbd_sc = 0; + rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf; + rtx->rxbd.cbd_sc = 0; + + rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf; + rtx->txbd.cbd_sc = 0; /* Set up the uart parameters in the parameter ram. */ @@ -256,13 +276,13 @@ static int smc_init (void) /* Make the first buffer the only buffer. */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; + rtx->txbd.cbd_sc |= BD_SC_WRAP; + rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - /* Single character receive. - */ - up->smc_mrblr = 1; - up->smc_maxidl = 0; + /* single/multi character receive. */ + up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN; + up->smc_maxidl = CONFIG_SYS_MAXIDLE; + rtx->rxindex = 0; /* Initialize Tx/Rx parameters. */ @@ -285,11 +305,10 @@ static int smc_init (void) static void smc_putc(const char c) { - volatile cbd_t *tbdf; - volatile char *buf; volatile smc_uart_t *up; volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; volatile cpm8xx_t *cpmp = &(im->im_cpm); + volatile serialbuffer_t *rtx; #ifdef CONFIG_MODEM_SUPPORT if (gd->be_quiet) @@ -304,19 +323,16 @@ smc_putc(const char c) up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase]; #endif - tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase]; + rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; /* Wait for last character to go. */ - - buf = (char *)tbdf->cbd_bufaddr; - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; + rtx->txbuf = c; + rtx->txbd.cbd_datlen = 1; + rtx->txbd.cbd_sc |= BD_SC_READY; __asm__("eieio"); - while (tbdf->cbd_sc & BD_SC_READY) { + while (rtx->txbd.cbd_sc & BD_SC_READY) { WATCHDOG_RESET (); __asm__("eieio"); } @@ -333,49 +349,53 @@ smc_puts (const char *s) static int smc_getc(void) { - volatile cbd_t *rbdf; - volatile unsigned char *buf; volatile smc_uart_t *up; volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; volatile cpm8xx_t *cpmp = &(im->im_cpm); - unsigned char c; + volatile serialbuffer_t *rtx; + unsigned char c; up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; #ifdef CONFIG_SYS_SMC_UCODE_PATCH up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase]; #endif - - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; + rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; /* Wait for character to show up. */ - buf = (unsigned char *)rbdf->cbd_bufaddr; - - while (rbdf->cbd_sc & BD_SC_EMPTY) + while (rtx->rxbd.cbd_sc & BD_SC_EMPTY) WATCHDOG_RESET (); - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; + /* the characters are read one by one, + * use the rxindex to know the next char to deliver + */ + c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex); + rtx->rxindex++; + /* check if all char are readout, then make prepare for next receive */ + if (rtx->rxindex >= rtx->rxbd.cbd_datlen) { + rtx->rxindex = 0; + rtx->rxbd.cbd_sc |= BD_SC_EMPTY; + } return(c); } static int smc_tstc(void) { - volatile cbd_t *rbdf; volatile smc_uart_t *up; volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; volatile cpm8xx_t *cpmp = &(im->im_cpm); + volatile serialbuffer_t *rtx; up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; #ifdef CONFIG_SYS_SMC_UCODE_PATCH up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase]; #endif - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; + rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; - return(!(rbdf->cbd_sc & BD_SC_EMPTY)); + return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY); } struct serial_device serial_smc_device = -- cgit v1.2.3