From 435dc8fcdb3bc61d3d490773a8f369f98a20c868 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 9 Jan 2008 11:36:21 +0100 Subject: Coding Style cleanup, update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 4815 ++++++++++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 3682 insertions(+), 1133 deletions(-) (limited to 'CHANGELOG') diff --git a/CHANGELOG b/CHANGELOG index ef5c7ea98..d682b96f6 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,1748 +1,4264 @@ -commit 467bcee11fe26ad422f2de971aa70866079870f2 -Author: Haavard Skinnemoen -Date: Fri Dec 14 15:36:18 2007 +0100 +commit b2e2142c500c48a57f18f9dd30e66c13caea0971 +Author: Stefan Roese +Date: Wed Jan 9 10:38:58 2008 +0100 - cfi_flash: Add manufacturer-specific fixups + POST: Execute SPR test after relocation - Run fixups based on the JEDEC manufacturer ID independent of the - command set ID. + On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses + self modifying code and this doesn't work with stack in d-cache, since + I can't move the code from d-cache to i-cache. We move the SPR test to + be executed a little later, after relocation. Then stack is located in + SDRAM and this self-modifying code is no problem anymore. - This changes current behaviour: Previously, geometry reversal for AMD - chips were done based on the command set ID, while they are now done - based on the JEDEC manufacturer and device ID. + Signed-off-by: Stefan Roese - Also add fixup for top-boot Atmel chips. A fixup is needed for - AT49BV6416(T) too, but since u-boot currently only reads the low byte - of the device ID, there's no way to tell it apart from AT49BV642D, - which should not have this fixup. Since AT49BV642D support is - necessary to get ATNGW100 board support into mainline, I've commented - out the fixup for now. +commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde +Author: Stefan Roese +Date: Wed Jan 9 10:28:20 2008 +0100 - Signed-off-by: Haavard Skinnemoen + ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore -commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a -Author: Haavard Skinnemoen -Date: Fri Dec 14 15:36:17 2007 +0100 + This patch configures the LWMON5 port to use d-cache as init-ram and + the unused GPT0_COMP6 as POST WORD storage. - cfi_flash: Add cmdset-specific init functions + Signed-off-by: Stefan Roese - Move things like reading JEDEC IDs and fixing up geometry reversal - into separate functions. The geometry reversal fixup is now performed - by altering the qry structure directly, which makes the sector init - code slightly cleaner. +commit 1754f50b710194f886b6f2831803d8960171a14d +Author: Stefan Roese +Date: Wed Jan 9 10:25:46 2008 +0100 - Signed-off-by: Haavard Skinnemoen + ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage -commit e23741f4a6d8047520ef0d4971762749b3587d32 -Author: Haavard Skinnemoen -Date: Fri Dec 14 15:36:16 2007 +0100 + The privious 4xx POST implementation only supported storing the POST + WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer + we need to store the POST WORD in some other non volatile location. + This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such + a location. - cfi_flash: Read whole QRY structure in one go + Signed-off-by: Stefan Roese - Read out the whole CFI Standard Query structure after successful cfi - identification. This allows subsequent code to access this information - directly without having to go through flash_read_uchar() and friends. +commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57 +Author: Stefan Roese +Date: Wed Jan 9 10:23:16 2008 +0100 - Signed-off-by: Haavard Skinnemoen + ppc4xx: Add 44x cache locking to better support init-ram in d-cache -commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db -Author: Haavard Skinnemoen -Date: Mon Dec 17 11:02:44 2007 +0100 + This patch adds support for locking the init-ram/stack in d-cache, + so that other regions may use d-cache as well - AVR32: Fix logic inversion in disable_interrupts() + Note, that this current implementation locks exactly 4k of d-cache, + so please make sure that you don't define a bigger init-ram area. Take + a look at the lwmon5 440EPx implementation as a reference. - disable_interrupts() should return nonzero if interrupts were - _enabled_ before, not disabled. + Signed-off-by: Stefan Roese - Signed-off-by: Haavard Skinnemoen +commit 0ddb89601a8d29e808db450366752ffdc6267c53 +Author: Wolfgang Denk +Date: Wed Jan 9 10:16:33 2008 +0100 -commit acac475212cbedb17b321a363a1c878e2b47b37f -Author: Haavard Skinnemoen -Date: Fri Dec 14 16:51:22 2007 +0100 + Fix memset bug in ext2fs_read_file() - AVR32: Enable interrupts at bootup + ext2fs_read_file() had the function arguments swapped. - The timer code depends on the timer interrupt to keep track of the - upper 32 bits of the cycle counter. This obviously doesn't work when - interrupts are disabled the whole time. + Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800 - Signed-off-by: Haavard Skinnemoen + Signed-off-by: Wolfgang Denk -commit 9570bcd87f4db255514f43b6701746c412f8fef0 -Author: Haavard Skinnemoen -Date: Thu Nov 15 10:03:45 2007 +0100 +commit 32d6f1bc09175f3b77469771e839bc7255a9f22e +Author: Markus Klotzbücher +Date: Tue Jan 5 08:17:15 1988 +0100 - AVR32: Fix wrong pin setup for USART3 + Fix problems with usb storage devices on MPC5200 /TQM5200 - As reported by Gerhard Berghofer: + The MPC5200 OHCI controller operates in big endian, so + CFG_OHCI_BE_CONTROLLER must be defined for it to work properly. - in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18 - instead of PB18 and PB19. + Signed-off-by: Markus Klotzbuecher - which is obviously correct. There's currently no code that uses - USART3, but custom boards may run into problems. +commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19 +Author: Wolfgang Denk +Date: Tue Jan 8 22:58:27 2008 +0100 - Signed-off-by: Haavard Skinnemoen + Fix compile problem with new env code. -commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918 -Author: Haavard Skinnemoen -Date: Thu Nov 1 12:44:20 2007 +0100 + Signed-off-by: Wolfgang Denk - README: Remove ATSTK1000 daughterboard list +commit 64b3727b9779d86127cd576e392a987de5ebb9fd +Author: Markus Klotzbücher +Date: Tue Nov 27 10:23:20 2007 +0100 - As noted by Kim Phillips, these lists tend to become out of date. + tools: fix fw_printenv tool to compile again - Signed-off-by: Haavard Skinnemoen + This patch updates the fw_printenv/fw_setenv userspace tool to include + the correct MTD header in order to compile against current kernel + headers. Backward compatibility is preserved by introducing an option + MTD_VERSION which can be set to "old" for compilation using the old MTD + headers. Along with this a number of warnings are fixed. -commit c81cbbad21cb0ae983e2e796211202234cdc8be2 -Author: Haavard Skinnemoen -Date: Tue Oct 30 14:56:36 2007 +0100 + Signed-off-by: Markus Klotzbuecher - Add ATSTK100[234] to MAINTAINERS +commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516 +Author: Matthias Fuchs +Date: Tue Jan 8 15:40:09 2008 +0100 - Add all the ATSTK1000 daughterboards to MAINTAINERS along with their - "mother". Also update the entry for ATSTK1000 to be not only about the - AP7000 CPU; it's intended to handle all CPUs in the AT32AP family. + ppc4xx: assign PCI interrupts on seuqoia boards - Signed-off-by: Haavard Skinnemoen + Some operating systems rely on assigned PCI interrupts. -commit 64ff2357b1727213803591813dbc779c924bf772 -Author: Haavard Skinnemoen -Date: Mon Oct 29 13:02:54 2007 +0100 + Signed-off-by: Matthias Fuchs - AVR32: Add support for the ATSTK1004 board +commit 6e9233d30afe57cb6e148fbfa4895e7810196fac +Author: Matthias Fuchs +Date: Tue Jan 8 15:50:49 2008 +0100 - ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, - which is a derivative of AT32AP7000. + ppc4xx: Move cpu/ppc4xx/vecnum.h into include path - Signed-off-by: Haavard Skinnemoen + This patch allows the use of 4xx interrupt vector number defines + in board specific code outside cpu/ppc4xx. -commit 667568db157f374b85abd7e03596ddd1f0b25681 -Author: Haavard Skinnemoen -Date: Mon Oct 29 13:02:54 2007 +0100 + Signed-off-by: Matthias Fuchs - AVR32: Add support for the ATSTK1003 board +commit 580d1d3186a2bc6dbdb626941b716dae1788e51e +Author: Matthias Fuchs +Date: Tue Jan 8 15:39:01 2008 +0100 - ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, - which is a derivative of AT32AP7000. + ppc4xx: Fix UIC2 vector number base - Signed-off-by: Haavard Skinnemoen + Signed-off-by: Matthias Fuchs -commit 5fee84a794a51ec830548cda485a770efb018b92 -Author: Haavard Skinnemoen -Date: Mon Oct 29 13:23:33 2007 +0100 +commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811 +Author: Matthias Fuchs +Date: Tue Jan 8 12:49:58 2008 +0100 - AVR32: Make some AT32AP700x peripherals optional + ppc4xx: Update PLB/PCI divider for PMC440 board - Add a chip-features file providing definitions of the form + This patch updates the PLB/PCI divider when running at + 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock. - AT32AP700x_CHIP_HAS_ + Signed-off-by: Matthias Fuchs - to indicate the availability of the given peripheral on the currently - selected chip. +commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde +Author: Matthias Fuchs +Date: Tue Jan 8 11:13:09 2008 +0100 - Signed-off-by: Haavard Skinnemoen + ppc4xx: Disable error message when no NAND chip is installed on PMC440 -commit 36f28f8a9605ee5dcfa330482cfc62171261af97 -Author: Haavard Skinnemoen -Date: Mon Oct 29 13:09:56 2007 +0100 + Add CFG_NAND_QUIET_TEST option to disable error message when + no NAND chip is installed on PMC440 boards. - AVR32: Rename at32ap7000 -> at32ap700x + Disable a couple of config defines that are only used for NAND_U_BOOT. - The SoC-specific code for all the AT32AP700x CPUs is practically - identical; the only difference is that some chips have less features - than others. By doing this rename, we can add support for the AP7000 - derivatives simply by making some features conditional. + Signed-off-by: Matthias Fuchs - Signed-off-by: Haavard Skinnemoen +commit ad3006fe7e84667021753b74247b0bafd97ba35f +Author: Gerald Van Baren +Date: Mon Jan 7 23:47:32 2008 -0500 -commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e -Author: Haavard Skinnemoen -Date: Fri Jun 29 18:22:34 2007 +0200 + LIBFDT: use memmove() instead of memcpy() - atmel_mci: Show SR when block read fails + This is partial patch from the DTC/libfdt + commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647 + Author: David Gibson + Date: Wed Nov 21 11:56:14 2007 +1100 - Show controller status as well as card status when an error occurs - during block read. + The patch also fixes one genuine bug caught by valgrind - + _packblocks() in fdt_rw.c was using memcpy() where it should have been + using memmove(). - Signed-off-by: Haavard Skinnemoen + Signed-off-by: Gerald Van Baren -commit 12d30aa79779c2aa7a998bbae4c075f822a53004 -Author: Haavard Skinnemoen -Date: Thu Dec 13 12:56:34 2007 +0100 +commit aec7135bc300e3340d18f203347ee00c5b5f68c0 +Author: David Gibson +Date: Mon Dec 17 14:42:07 2007 +1100 - cfi_flash: Use map_physmem() and unmap_physmem() + libfdt: Add more documentation (patch the seventh) - Use map_physmem() and unmap_physmem() to convert from physical to - virtual addresses. This gives the arch a chance to provide an uncached - mapping for flash accesses. + This patch adds more documenting comments to libfdt.h. Specifically, + these document the read/write functions (not including fdt_open_into() + and fdt_pack(), for now). - Signed-off-by: Haavard Skinnemoen + Signed-off-by: David Gibson -commit 4d7d6936eb29af7cca330937808312aa5f61454d -Author: Haavard Skinnemoen -Date: Thu Dec 13 12:56:33 2007 +0100 +commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e +Author: David Gibson +Date: Mon Dec 17 14:41:52 2007 +1100 - Introduce map_physmem() and unmap_physmem() + libfdt: Add more documentation (patch the sixth) - map_physmem() returns a virtual address which can be used to access a - given physical address without involving the cache. unmap_physmem() - should be called when the virtual address returned by map_physmem() is - no longer needed. + This patch adds some more documenting comments to libfdt.h. + Specifically this documents all the write-in-place functions. - This patch adds a stub implementation which simply returns the - physical address cast to a uchar * for all architectures except AVR32, - which converts the physical address to an uncached virtual mapping. - unmap_physmem() is a no-op on all architectures, but if any - architecture needs to do such mappings through the TLB, this is the - hook where those TLB entries can be invalidated. + Signed-off-by: David Gibson - Signed-off-by: Haavard Skinnemoen +commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0 +Author: Gerald Van Baren +Date: Sat Dec 29 22:45:27 2007 -0500 -commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d -Author: Haavard Skinnemoen -Date: Thu Dec 13 12:56:32 2007 +0100 + Fine grained per property /chosen updating. - cfi_flash: Introduce read and write accessors + Implement a suggestion by Scott Wood to make the /chosen handling fine + grained. Don't overwrite pre-existing properties on a per-property basis, + so if /chosen exists but a necessary /chosen/property doesn't, it gets + created. If a /chosen property exists, it is NOT overwritten unless the + "force" flag is true. - Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use - them to access the flash memory. This makes it clearer when the flash - is actually being accessed; merely dereferencing a volatile pointer - looks just like any other kind of access. + Signed-off-by: Gerald Van Baren - Signed-off-by: Haavard Skinnemoen +commit 238cb7a423c6eaa36496efb788cfb9798cea7f95 +Author: Gerald Van Baren +Date: Sat Jan 5 15:33:29 2008 -0500 -commit 812711ce6b3a386125dcf0d6a59588e461abbb87 -Author: Haavard Skinnemoen -Date: Thu Dec 13 12:56:31 2007 +0100 + Improve the FDT help message. - Implement __raw_{read,write}[bwl] on all architectures + Add a note that "fdt copy" makes the new address active. + Remove most of the extra hints at the end of the fdt help. - This adds implementations of __raw_read[bwl] and __raw_write[bwl] to - m68k, ppc, nios and nios2. The m68k and ppc implementations were taken - from Linux. + Signed-off-by: Gerald Van Baren - Signed-off-by: Haavard Skinnemoen +commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92 +Author: Gerald Van Baren +Date: Sat Jan 5 14:52:04 2008 -0500 -commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd -Author: Haavard Skinnemoen -Date: Sat Oct 6 18:55:36 2007 +0200 + Support setting FDT properties with optional values. - cfi_flash: Reorder functions and eliminate extra prototypes + Fix a bug found and documented by Bartlomiej Sieka where the optional + value on "fdt set []" wasn't optional. - Reorder the functions in cfi_flash.c so that each function only uses - functions that have been defined before it. This allows the static - prototype declarations near the top to be eliminated and might allow - gcc to do a better job inlining functions. + => fdt mknode / testnode + => fdt print /testnode + testnode { + }; + => fdt set /testnode testprop + => fdt print /testnode + testnode { + testprop; + }; - Signed-off-by: Haavard Skinnemoen + Signed-off-by: Gerald Van Baren -commit 3055793bcbdf24b1f8117f606ffb766d32eb766f -Author: Haavard Skinnemoen -Date: Thu Dec 13 12:56:29 2007 +0100 +commit 22fb2246df91bfc840d87f0c5910818bad55577a +Author: Matthias Fuchs +Date: Fri Dec 28 11:56:30 2007 +0100 - cfi_flash: Make some needlessly global functions static + Add fdt_find_and_setprop() to fdt_support.h - Make functions not declared in any header file static. + fdt_find_and_setprop() is used by several 4xx boards and it's + missing in the appropriate header. This patch eliminates a + warning when building U-Boot for such boards. - Signed-off-by: Haavard Skinnemoen + Signed-off-by: Matthias Fuchs + Acked-by: Stefan Roese -commit 7e5b9b471518c5652febc68ba62b432193d6abf4 -Author: Haavard Skinnemoen -Date: Thu Dec 13 12:56:28 2007 +0100 +commit 802b769bac17b0560d3535a42c502469ee190cd1 +Author: Stefan Roese +Date: Tue Jan 8 18:39:30 2008 +0100 - cfi_flash: Break long lines + ppc4xx: Return 0 on success in 4xx ethernet driver - This patch tries to keep all lines in the cfi_flash driver below 80 - columns. There are a few lines left which don't fit this requirement - because I couldn't find any trivial way to break them (i.e. it would - take some restructuring, which I intend to do in a later patch.) + Signed-off-by: Stefan Roese - Signed-off-by: Haavard Skinnemoen +commit 6775c68683a53c7abc778774641aac6f833a2cbf +Author: Kim Phillips +Date: Tue Jan 8 09:59:49 2008 -0600 -commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a -Author: Bartlomiej Sieka -Date: Tue Dec 11 13:59:57 2007 +0100 + mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code - CFI: synchronize command offsets with Linux CFI driver + Signed-off-by: Kim Phillips - Fixes non-working CFI Flash on the Inka4x0 board. +commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7 +Author: Kim Phillips +Date: Thu Dec 20 16:28:34 2007 -0600 - Signed-off-by: Bartlomiej Sieka + mpc83xx: rm remaining FLAT_TREE code -commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d -Author: Kumar Gala -Date: Fri Dec 7 12:17:34 2007 -0600 + ..in board pci.c files - Handle MPC85xx PCIe reset errata (PCI-Ex 38) + Signed-off-by: Kim Phillips - On the MPC85xx boards that have PCIe enable the PCIe errata fix. - (MPC8544DS, MPC8548CDS, MPC8568MDS). +commit b3458d2cd55d01732e30a76d898afd99e871cd67 +Author: Kim Phillips +Date: Thu Dec 20 15:57:28 2007 -0600 - Signed-off-by: Kumar Gala + mpc83xx: remove FLAT_TREE code -commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c -Author: Kumar Gala -Date: Fri Dec 7 12:04:30 2007 -0600 + need to rm it from pci code, too! - Update Freescale MPC85xx ADS/CDS/MDS board config + Signed-off-by: Kim Phillips - * Enabled CONFIG_CMD_ELF +commit 5b8bc606c61456566af6912f818a153b6b06f242 +Author: Kim Phillips +Date: Thu Dec 20 14:09:22 2007 -0600 - Signed-off-by: Kumar Gala + mpc83xx: convert to using do_fixup_*() -commit d435793229ce29a42797c1edc39f5b34f987f91a -Author: Kumar Gala -Date: Fri Dec 7 04:59:26 2007 -0600 + convert to using simpler mpc85xx style fdt update code; streamline by + eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm + the old school FLAT_TREE code from 83xx (since the sbc8349 was just + converted over to using libfdt). - Handle Asynchronous DDR clock on 85xx + Signed-off-by: Kim Phillips - The MPC8572 introduces the concept of an asynchronous DDR clock with - regards to the platform clock. +commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab +Author: Paul Gortmaker +Date: Thu Dec 20 12:58:51 2007 -0500 - Introduce get_ddr_freq() to report the DDR freq regardless of sync/async - mode. + sbc8349: enable libfdt by default on WRS SBC8349 board. - Signed-off-by: Kumar Gala + Make libfdt the default for the WRS SBC8349 board. + Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef + done for the other 83xx based boards. Also fix a typo in CONFIG_PCI. -commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10 -Author: Kumar Gala -Date: Thu Nov 29 10:34:28 2007 -0600 + Signed-off-by: Paul Gortmaker - Update Freescale MPC85xx ADS/CDS/MDS board config +commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40 +Author: Paul Gortmaker +Date: Thu Dec 20 12:58:16 2007 -0500 - * Removed some misc environment setup - * Enabled CONFIG_CMDLINE_EDITING + sbc8349: migrate board to libfdt - Signed-off-by: Kumar Gala + This adds libfdt support code for the Wind River sbc8349 board. -commit 415a613babb84d5e5d5b42e8e553868c71fc3a64 -Author: Kumar Gala -Date: Thu Nov 29 10:47:44 2007 -0600 + Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for + the other Freescale 83xx boards. - Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. + Signed-off-by: Paul Gortmaker - Minor path corrections needed to ensure buildability. +commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d +Author: Paul Gortmaker +Date: Thu Dec 20 12:56:19 2007 -0500 - Signed-off-by: Kumar Gala + sbc8349: Remove board specific ECC code -commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf -Author: Kumar Gala -Date: Thu Nov 29 10:16:18 2007 -0600 + ECC code is now shared for all 83xx boards, so remove board specific one. + See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference. - Move the MPC8540 ADS board under board/freescale. + Signed-off-by: Paul Gortmaker - Minor path corrections needed to ensure buildability. +commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7 +Author: Kim Phillips +Date: Thu Dec 20 01:30:48 2007 -0600 - Signed-off-by: Kumar Gala + mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x) -commit 870ceac5b3a3486c109396e005af81ae762b5710 -Author: Kumar Gala -Date: Thu Nov 29 10:14:50 2007 -0600 + continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x - Move the MPC8560 ADS board under board/freescale. + Signed-off-by: Kim Phillips - Minor path corrections needed to ensure buildability. +commit ccf21c311e68d48399eff1e72936052885f6e3f7 +Author: Joakim Tjernlund +Date: Thu Dec 6 16:43:40 2007 +0100 - Signed-off-by: Kumar Gala + Add support CONFIG_UEC_ETH3 in MPC83xx -commit acbca876fb3fec25cd9c55b0efc81ff618ff5262 + Signed-off-by: Joakim Tjernlund + +commit e6af9932d31171e35db880e7b2f29f903b1b7660 Author: Kumar Gala -Date: Thu Nov 29 10:13:47 2007 -0600 +Date: Mon Nov 26 11:00:54 2007 -0600 - Move the MPC8568 MDS board under board/freescale. + Remove CONFIG options related to OF that we dont use - Minor path corrections needed to ensure buildability. + The MPC8360E MDS config defined: + CONFIG_OF_HAS_BD_T + CONFIG_OF_HAS_UBOOT_ENV + + Which we don't use or ever needed. This seems like copy-paste feature creep. Signed-off-by: Kumar Gala -commit a853d56c59b33415304531443633808736acfc6e -Author: Kumar Gala -Date: Thu Nov 29 02:18:59 2007 -0600 +commit f602082b4b7ed4ee16432067cc67a0a24fedc715 +Author: Kim Phillips +Date: Mon Dec 10 14:16:22 2007 -0600 - Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx + mpc83xx: supress compiler warning - We already had defines for LAWAR_TRGT_IF_* that we should use - rather than creating new ones. Also, added some missing defines for - PCIE targets. + mpc8360emds.c: In function ‘ft_board_setup’: + mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type + mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type - Signed-off-by: Kumar Gala + Signed-off-by: Kim Phillips -commit 04db400892da37b76a585e332a0c137954ad2015 -Author: Kumar Gala -Date: Thu Nov 29 02:10:09 2007 -0600 +commit c16e44fa835fb9eec982d919863a04e2f78e5ce7 +Author: Kim Phillips +Date: Tue Nov 27 14:17:29 2007 -0600 - Stop using immap_t on 85xx + mpc83xx: fix remaining fdt_find_node_by_path references - In the future the offsets to various blocks may not be in same location. - Move to using CFG_MPC85xx_*_ADDR as the base of the registers - instead of getting it via &immap. + rename to fdt_path_offset - Signed-off-by: Kumar Gala + Signed-off-by: Kim Phillips -commit 2714223f8e04ab3e4133ff65872eef366d90bfea -Author: Kumar Gala -Date: Thu Nov 29 01:23:09 2007 -0600 +commit 921d4b19ad1be704df58725485d9292dc0414adf +Author: Kim Phillips +Date: Mon Nov 19 12:30:09 2007 -0600 - Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt + mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x - Signed-off-by: Kumar Gala + Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x. + This change guarantees that the environment will be located on the + first flash sector after the U-Boot image. -commit c480861bf000156e6a3e932c258db59ff2212dd3 -Author: Kumar Gala -Date: Thu Nov 29 01:06:19 2007 -0600 + Signed-off-by: Kim Phillips - Update MPC8568 MDS to use libfdt +commit 24f868433b50ecbaa88e118aadc7bd254013c6ae +Author: Kim Phillips +Date: Fri Nov 9 14:28:08 2007 -0600 - Updated the MPC8568 MDS config to use libfdt and assume use of aliases for - ethernet, pci, and serial for the various fixups that are done. + mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid - Signed-off-by: Kumar Gala + u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type + properties in the device tree so the PHY gets configured for internal delay on + RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2. -commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7 -Author: Haiying Wang -Date: Wed Nov 14 15:52:06 2007 -0500 + Signed-off-by: Kim Phillips - Add PCI Express support on MPC8568MDS +commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b +Author: Dave Liu +Date: Tue Sep 18 12:41:15 2007 +0800 - Signed-off-by: Haiying Wang - Signed-off-by: Kumar Gala + mpc83xx: update the CREDITS and MAINTAINERS -commit b90d25497625b90ffa3f2911a0895ca237556ff5 -Author: Kumar Gala -Date: Thu Nov 29 00:11:44 2007 -0600 + update the CREDITS and MAINTAINERS. - Update MPC85xx CDS to use libfdt + Signed-off-by: Dave Liu - Updated the MPC85xx CDS config to use libfdt and assume use of aliases for - ethernet, pci, and serial for the various fixups that are done. +commit b21add4b42af7b767448251b599b91066a160e0d +Author: Dave Liu +Date: Tue Sep 18 12:40:21 2007 +0800 - Signed-off-by: Kumar Gala + mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds -commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255 -Author: Kumar Gala -Date: Wed Nov 28 22:54:27 2007 -0600 + Add the MAINTAINER and MAKEALL entries for mpc837xemds - Update MPC8540 ADS to use libfdt + Signed-off-by: Dave Liu - Updated the MPC8540 ADS config to use libfdt and assume use of aliases for - ethernet, pci, and serial for the various fixups that are done. +commit f8900ce9094c462355eb792eea264ff16ac8fd16 +Author: Dave Liu +Date: Tue Sep 18 12:38:53 2007 +0800 - Signed-off-by: Kumar Gala + mpc83xx: Add the MPC837xEMDS board readme -commit 5ce715802f6c50dc78b3405b92f184b1e3710519 -Author: Kumar Gala -Date: Wed Nov 28 22:40:31 2007 -0600 + Add the README.mpc837xemds to /doc - Update MPC8560 ADS to use libfdt + Signed-off-by: Dave Liu - Updated the MPC8560 ADS config to use libfdt and assume use of aliases for - ethernet, pci, and serial for the various fixups that are done. +commit 19580e660cc8da49f16536a8bd78c047c7bc12e5 +Author: Dave Liu +Date: Tue Sep 18 12:37:57 2007 +0800 - Signed-off-by: Kumar Gala + mpc83xx: Add the support of MPC837xEMDS board -commit aafeefbdb8b029f5ca2a195598d0a501a606eea9 -Author: Kumar Gala -Date: Wed Nov 28 00:36:33 2007 -0600 + The MPC837xEMDS board support: + * DDR2 400MHz hardcoded and SPD init + * Local bus NOR Flash + * I2C, UART, MII and RTC + * eTSEC RGMII + * PCI host - Stop using immap_t for cpm offset on 85xx + Signed-off-by: Dave Liu - In the future the offsets to various blocks may not be in same location. - Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers - instead of getting it via &immap->im_cpm. +commit 555da61702771fe0f76f3de23b4e7590f3704161 +Author: Dave Liu +Date: Tue Sep 18 12:36:58 2007 +0800 - Signed-off-by: Kumar Gala + mpc83xx: Add the support of MPC8315E SoC -commit f59b55a5b8fcadaa99781ba48e7a38e956afa527 -Author: Kumar Gala -Date: Tue Nov 27 23:25:02 2007 -0600 + The MPC8315E SoC including e300c3 core and new IP blocks, + such as TDM, PCI Express and SATA controller. - Stop using immap_t for guts offset on 85xx + Signed-off-by: Dave Liu - In the future the offsets to various blocks may not be in same location. - Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers - instead of getting it via &immap->im_gur. +commit 03051c3d35c9981ceaa059005660e699f3eacf1c +Author: Dave Liu +Date: Tue Sep 18 12:36:11 2007 +0800 - Signed-off-by: Kumar Gala + mpc83xx: Add the support of MPC837x SoC -commit 50c03c8cf494d91cdec39670d95337c743e16ec9 -Author: Kumar Gala -Date: Tue Nov 27 22:42:34 2007 -0600 + The MPC837x SoC including e300c4 core and new IP blocks, + such as SDHC, PCI Express and SATA controller. - Update MPC8544 DS config + Signed-off-by: Dave Liu - * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2 - * Removed some misc environment setup - * Moved to using fdtfile & fdtaddr as fdt env var names - * Enabled CONFIG_CMDLINE_EDITING +commit 651d96f7e4c84adcdb98ef07ec878c20326e3359 +Author: Anton Vorontsov +Date: Wed Nov 14 18:54:53 2007 +0300 - Signed-off-by: Kumar Gala + MPC8360E-MDS: configure and enable second UART -commit addce57e2e4c49e77ffb2020a84690713bb18b47 -Author: Kumar Gala -Date: Mon Nov 26 17:12:24 2007 -0600 + Despite user manual, BCSR9.7 is negated (high) on HRST, so + UART2 is disabled. Fix that and configure QE pins properly. - Update MPC8544DS to use libfdt + Signed-off-by: Anton Vorontsov - Updated the MPC8544DS config to use libfdt and assume use of aliases for - ethernet, pci, and serial for the various fixups that are done. +commit b2893e1fcb28fad8c8b317104df8cee0142c7631 +Author: Timur Tabi +Date: Mon Nov 5 09:34:06 2007 -0600 - Signed-off-by: Kumar Gala + 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions -commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65 -Author: Kumar Gala -Date: Thu Nov 29 00:15:30 2007 -0600 + Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the + currently-defined 83xx boards. This change guarantees that the environment + will be located on the first flash sector after the U-Boot image. - Add libfdt based ft_cpu_setup for mpc85xx + Signed-off-by: Timur Tabi + Signed-off-by: Kim Phillips - Signed-off-by: Kumar Gala +commit e05329516a13616b53240cd85b739217c2bf87f1 +Author: Larry Johnson +Date: Fri Jan 4 13:27:02 2008 -0500 -commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39 + ppc4xx: Remove weak binding from common Denali data-eye search code + + Now that there are no board-specific versions of + "denali_core_search_data_eye()", the weak binding on the common version + can be removed. + + Signed-off-by: Larry Johnson + +commit 5ba576c01602fd328800a427964c36a0a05c5dce Author: Stefan Roese -Date: Sat Dec 8 08:25:09 2007 +0100 +Date: Sat Jan 5 09:13:46 2008 +0100 - CFI: Coding style cleanup + ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c Signed-off-by: Stefan Roese -commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 -Author: Michael Schwingen -Date: Fri Dec 7 23:35:02 2007 +0100 +commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4 +Author: Stefan Roese +Date: Sat Jan 5 09:12:41 2008 +0100 - CFI: support JEDEC flash roms in CFI-flash framework + ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup - The following patch adds support for non-CFI flash ROMS, by hooking into the - CFI flash code and using most of its code, as recently discussed here in the - thread "Mixing CFI and non-CFI flashs". + On Katmai the complete auto-calibration somehow doesn't seem to + produce the best results, meaning optimal values for RQFD/RFFD. + This was discovered by GDA using a high bandwidth scope, + analyzing the DDR2 signals. GDA provided a fixed value for RQFD, + so now on Katmai "only" RFFD is auto-calibrated. + + This patch also adds RDCC calibration as mentioned on page 7 of + the AMCC PowerPC440SP/SPe DDR2 application note: + "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" - Signed-off-by: Michael Schwingen Signed-off-by: Stefan Roese -commit c01b17dd856fa120b2970f50d9598546a4927ec3 -Author: Gerald Van Baren -Date: Wed Nov 28 21:24:50 2007 -0500 +commit 49db47b8ae6afff2b898be312948ff501357dc80 +Author: Matthias Fuchs +Date: Wed Jan 2 16:48:42 2008 +0100 - Conditionally compile fdt_fixup_ethernet() + ppc4xx: Remove sdram.h from PMC440 board - Fix compiler warnings: On boards that don't have ethernets defined, - don't compile fdt_fixup_ethernet(). + Signed-off-by: Matthias Fuchs -commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7 -Author: Kumar Gala -Date: Tue Nov 27 21:59:46 2007 -0600 +commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a +Author: Matthias Fuchs +Date: Wed Jan 2 16:48:34 2008 +0100 - Convert boards that set memory node to use fdt_fixup_memory() + ppc4xx: use common denali core defines and data eye search code for PMC440 - Signed-off-by: Kumar Gala + Signed-off-by: Matthias Fuchs -commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058 -Author: Kumar Gala -Date: Mon Nov 26 17:06:15 2007 -0600 +commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489 +Author: Matthias Fuchs +Date: Wed Jan 2 12:05:14 2008 +0100 - Added fdt_fixup_stdout that uses aliases to set linux,stdout-path + ppc4xx: More cleanup for esd's LCD code - We use a combination of the serialN alias and CONFIG_CONS_INDEX to - determine which serial alias we should set linux,stdout-path to. + Signed-off-by: Matthias Fuchs - Signed-off-by: Kumar Gala +commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb +Author: Stefan Roese +Date: Fri Jan 4 12:00:01 2008 +0100 -commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc -Author: Kumar Gala -Date: Mon Nov 26 14:57:45 2007 -0600 + ppc4xx: Fix Sequoia NAND booting target - Add common memory fixup function + The Sequoia NAND booting target now uses the recently extracted + cpu/ppc4xx/denali_data_eye.c file too. - Add the function fdt_fixup_memory() to fixup the /memory node of the fdt + Signed-off-by: Stefan Roese - Signed-off-by: Kumar Gala +commit 0ddd969aec532bd7eae30fc09590488a3aaa629a +Author: Lawrence R. Johnson +Date: Thu Jan 3 15:02:02 2008 -0500 -commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157 -Author: Kumar Gala -Date: Mon Nov 26 11:19:12 2007 -0600 + ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board - Conditionally compile fdt_support.c + Signed-off-by: Larry Johnson - Modify common/Makefile to conditionally compile fdt_support.c based - on CONFIG_OF_LIBFDT. +commit b05e8bf58be9d8956fdfde3d8c8e87c140414663 +Author: Lawrence R. Johnson +Date: Fri Jan 4 02:11:56 2008 -0500 - Signed-off-by: Kumar Gala + ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board -commit d88e7ba0980773479e1a64badb293116071b7ef0 -Author: Kumar Gala -Date: Mon Nov 26 10:41:40 2007 -0600 + Note: this patch changes the configuration of some GPIO registers: - Fix build breakage due to libfdt import + Register Old Value New Value + --------------- ---------- ---------- + DCR GPIO0_TCR 0x0000000F 0x0000F0CF + DCR GPIO0_TSRH 0x55005000 0x00000000 + DCR GPIO1_TCR 0xC2000000 0xE2000000 + DCR GPIO1_TSRL 0x0C000000 0x00200000 + DCR GPIO1_ISR2L 0x00050000 0x00110000 - The IDS8247 got lost in the update and need an API update - do to rename of functions in libfdt. + Signed-off-by: Larry Johnson - Signed-off-by: Kumar Gala +commit 5ab884b254ca2e707ab50545cd705f30108cf491 +Author: Lawrence R. Johnson +Date: Thu Jan 3 18:54:00 2008 -0500 + + ppc4xx: Add functionality to GPIO support + + This patch makes two additions to GPIO support: + + First, it adds function gpio_read_in_bit() to read the a bit from the + GPIO Input Register (GPIOx_IR) in the same way that function + gpio_read_out_bit() reads a bit from the GPIO Output Register + (GPIOx_OR). + + Second, it modifies function gpio_set_chip_configuration() to provide + an additional option for configuring the GPIO from the + "CFG_4xx_GPIO_TABLE". + + According to the 440EPx User's Manual, when an alternate output is used, + the three-state control is configured in one of two ways, depending on + the particular output. The first option is to select the corresponding + alternate three-state control in the GPIOx_TRSH/L registers. The second + option is to select the GPIO Three-State Control Register (GPIOx_TCR) in + the GPIOx_TRSH/L registers, and set the corresponding bit in the + GPIOx_TCR register to enable the output. For example, the Manual + specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use + the alternate three-state control (first option), and specifies + configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output + enabled in the GPIOx_TCR register (second option). + + Currently, gpio_set_chip_configuration() configures all alternate signal + outputs to use the first option. This patch allow the second option to + be selected by setting the "out_val" element in the table entry to + "GPIO_OUT_1". The first option is used when the "out_val" element is + set to "GPIO_OUT_0". Because "out_val" is not currently used when an + alternate signal is selected, and because all current GPIO tables set + "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should + not change any existing configurations. -commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714 -Author: Gerald Van Baren -Date: Fri Nov 23 19:43:20 2007 -0500 + Signed-off-by: Larry Johnson - Add spaces around the = in the fdt print format. +commit 196404cdc1de495d6182e84731c200fc5748df15 +Author: Larry Johnson +Date: Sun Dec 30 01:01:54 2007 -0500 - Signed-off-by: Gerald Van Baren + PPC4xx: Remove sdram.h from board/lwmon5 -commit 29592ecba3b932b9b152bcec6c0c0806412db4a3 -Author: Nobuhiro Iwamatsu -Date: Fri Dec 7 01:25:38 2007 +0900 + These definitions are now in "include/ppc440.h". - sh: Moved driver of the SuperH dependence + Signed-off-by: Larry Johnson - The composition of the directory in the drivers/ changed. - I moved SuperH serial driver and marubun PCMCIA driver. +commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b +Author: Larry Johnson +Date: Sun Dec 30 01:01:32 2007 -0500 - Signed-off-by: Nobuhiro Iwamatsu + PPC4xx: Use common code for LWMON5 board SDRAM support -commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2 -Author: Wolfgang Denk -Date: Thu Dec 6 10:21:19 2007 +0100 + This patch also modifies the functionality of the code so that the data-eye + search is now done with with the cache disabled. - Release v1.3.1 + Signed-off-by: Larry Johnson - Signed-off-by: Wolfgang Denk +commit 62cc3951ab72135d9c101f1845b794e63a0fa189 +Author: Larry Johnson +Date: Sun Dec 30 01:01:14 2007 -0500 -commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb -Author: Wolfgang Denk -Date: Thu Dec 6 10:21:03 2007 +0100 + PPC4xx: Remove sdram.h from board/amcc/sequoia - ADS5121 Board: fix compile problem. + These definitions are now in "include/ppc440.h". - Signed-off-by: Wolfgang Denk + Signed-off-by: Larry Johnson -commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d -Author: Wolfgang Denk -Date: Mon Dec 3 00:15:28 2007 +0100 +commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a +Author: Larry Johnson +Date: Sun Dec 30 01:00:50 2007 -0500 - Prepare for 1.3.1-rc1 + PPC4xx: Use common code for Sequoia board SDRAM support - Signed-off-by: Wolfgang Denk + Signed-off-by: Larry Johnson -commit 260eea5676ca46903a335686cc020b29c4ca46fe -Author: Nobuhiro Iwamatsu -Date: Thu Nov 29 01:21:54 2007 +0900 +commit 8b0c5c127690335758100c25eaec2b84db97c101 +Author: Matthias Fuchs +Date: Thu Dec 27 16:58:41 2007 +0100 - sh: Add SuperH boards maintainer to MAINTAINERS file + net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option - Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. + When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's + networking stack does not automatically switch to + another interface. This patch does not touch the default + behavior. - Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Matthias Fuchs + Signed-off-by: Ben Warren -commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747 -Author: Nobuhiro Iwamatsu -Date: Thu Nov 29 00:13:04 2007 +0900 +commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32 +Author: Upakul Barkakaty +Date: Thu Nov 29 12:16:13 2007 +0530 - sh: Add ms7750se support in MAKEALL + NET: Proper return code handling in eth_init() function in file eth.c - Signed-off-by: Nobuhiro Iwamatsu + This patch modifies the return code handling in the eth_init() + function, to be compatible with the handling of the return codes in + the other network stack files. It now returns a 0 on Success and -1 on + error. -commit c7144373427a178332bf9754131c8c34c52c200a -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Tue Nov 27 09:44:53 2007 +0100 + Signed-off-by: Upakul Barkakaty + Signed-off-by: Ben Warren - sh: Add sh3 and sh4 support in MAKEALL +commit 5ca2d0953e4579a80810966cca2077e20d912c97 +Author: Shinya Kuribayashi +Date: Mon Nov 19 20:27:04 2007 +0900 - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD - Signed-off-by: Nobuhiro Iwamatsu + net/eth.c: Fix env_enetaddr signed overflow -commit 130080874a3d28450098481a262c5f7c855e908d -Author: Nobuhiro Iwamatsu -Date: Sun Nov 25 02:51:17 2007 +0900 + Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are + warned as below: - sh: Add document for SuperH. + U-Boot 1.2.0 (Aug 30 2007 - 08:27:37) - This document is a summary of information concerning SuperH of U-Boot. + DRAM: 256 MB + Flash: 32 MB + In: serial + Out: serial + Err: serial + Net: NEC-Candy + Warning: NEC-Candy MAC addresses don't match: + Address in SROM is 00:00:4C:80:92:A2 + Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21 - Signed-off-by: Nobuhiro Iwamatsu + This patch changes env_enetaddr type from `char' to `unsigned char'. -commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d -Author: Nobuhiro Iwamatsu -Date: Sun Nov 25 02:39:31 2007 +0900 + Cc: Masaki Ishikawa + Signed-off-by: Shinya Kuribayashi + Signed-off-by: Ben Warren - sh: Add marubun's pcmcia driver +commit f85b60710571b37293d2233933b76e2aa3db5635 +Author: Rafal Jaworowski +Date: Thu Dec 27 18:19:02 2007 +0100 - Marubun pcmcia is a chip for PCMCIA used with SuperH. - Of course, this can be used even by other architectures. - When use this driver, came to be able to use CompactFlash - and Ethernet. + Introduce new eth_receive routine - Signed-off-by: Nobuhiro Iwamatsu + The purpose of this routine is receiving a single network frame, outside of + U-Boot's NetLoop(). Exporting it to standalone programs that run on top of + U-Boot will let them utilise networking facilities. For sending a raw frame + the already existing eth_send() can be used. -commit febd86b969b975289ed948f1ac0eb9722da41ced -Author: Nobuhiro Iwamatsu -Date: Sun Nov 25 02:32:13 2007 +0900 + The direct consumer of this routine is the newly introduced API layer for + external applications (enabled with CONFIG_API). - sh: Update SuperH SCIF driver + Signed-off-by: Rafal Jaworowski + Signed-off-by: Piotr Kruszynski + Signed-off-by: Ben Warren - - Changed volatile unsigned to vu_. - - Changed Makefile for kconfig. +commit 5c740711f0ea5b51414b341b71597c4a0751be74 +Author: Jon Loeliger +Date: Thu Jan 3 10:41:04 2008 -0600 - Signed-off-by: Nobuhiro Iwamatsu + 8610: Move include of config.h earlier. -commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788 -Author: Wolfgang Denk -Date: Mon Nov 26 19:18:21 2007 +0100 + Include config.h earlier in the set of #includes + so as to avoid a incidental and duplicate definition + of CFG_CACHELINE_SIZE. - Cleanup coding style; update CHANGELOG + Signed-off-by: Jon Loeliger - Signed-off-by: Wolfgang Denk +commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff +Author: Jon Loeliger +Date: Tue Dec 4 10:53:34 2007 -0600 -commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sun Nov 25 22:39:25 2007 +0100 + Don't slam #undef DEBUG in the 8641HPCN config file. - MAKEALL: add missing 512x boards in ppc + Doing so prevents it from being individually set + and useful in other files. - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Jon Loeliger -commit a340c325e668ca7386c2276387681720be9c3757 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sun Nov 25 18:45:47 2007 +0100 +commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c +Author: Jon Loeliger +Date: Wed Nov 28 14:47:18 2007 -0600 - Makefile : fix tags ctags etags with new drivers organization + Convert MPC8641HPCN to use libfdt. - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Assumes the presence of the aliases node in the DTS to + locate the ethernet, pci and serial nodes for fixups. -commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sun Nov 25 18:45:47 2007 +0100 + Use consistent fdtaddr and fdtfile in environment variables. - Makefile : fix tags ctags etags with new drivers organization + Signed-off-by: Jon Loeliger - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD +commit ce37422d0002e10490e268392e0c4e3028e52cec +Author: Stefan Roese +Date: Wed Jan 2 14:06:26 2008 +0100 -commit 59829cc189378c142c13d2aa8d9a897d8bef3961 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 21:26:56 2007 +0100 + cfi_flash: Fix bug in flash_isset() to use correct 32bit function - drivers/mtd : move mtd drivers to drivers/mtd + This bug was detected on the LWMON5 target which has 2 Intel 16bit wide + flash chips connected to a 32bit wide port. - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Stefan Roese -commit 318c0b90431f2648552e5ade78833f42652ce859 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 21:17:55 2007 +0100 +commit 1182e9f8e3b92fc372d64943293de53daa2e26cf +Author: Wolfgang Denk +Date: Wed Jan 2 15:58:44 2008 +0100 - drivers/misc : move misc drivers to drivers/misc + Fix compile problem introduced by "cleanup" commit 3dfd708c - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk -commit 33daf5b7858807cb4ce4158c2c56524671c14c08 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 21:13:59 2007 +0100 +commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7 +Author: Wolfgang Denk +Date: Wed Jan 2 15:54:45 2008 +0100 - drivers/block : move block drivers to drivers/block + Make scripts and Makefiles POSIX compliant - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + The bash builtin versions of the "test" (resp. "[") command allow + using "==" for string comparisons, but POSIX compatible implemen- + tations (like /usr/bin/test) insist on using "=" only. On such systems + you will see: -commit 0c698dcaa70275eb8814f665b545547cee013892 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 20:59:50 2007 +0100 + $ /usr/bin/test a == a && echo OK + /usr/bin/test: ==: binary operator expected - drivers/rtc : move rtc drivers to drivers/rtc + This patch fixes Makefiles and scripts to use POSIX style. - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk -commit f868cc5a50757d94f36c312395481cb0f187d9e6 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 20:14:44 2007 +0100 +commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc +Author: Wolfgang Denk +Date: Wed Jan 2 12:38:43 2008 +0100 - drivers/hwmon : move hardware monitor drviers to drivers/hwmon + Minor coding style cleanup. - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk -commit 16b195c82a18cbfd164800f17a1ef9db2e48331a -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 19:46:45 2007 +0100 +commit e174ac34adf5d5653df12bc3cf19c52063a71269 +Author: Stefan Roese +Date: Fri Dec 28 17:29:56 2007 +0100 - drivers/input : move input drivers to drivers/input + ppc4xx: Coding style cleanup - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Stefan Roese -commit e4558666293364fc3af1c1d9381ca933fa0f1275 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 19:40:11 2007 +0100 +commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5 +Author: Matthias Fuchs +Date: Fri Dec 28 17:07:24 2007 +0100 - drivers/usb : move usb drivers to drivers/usb + ppc4xx: Complete PMC440 board support - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + This patch brings the PMC440 board configuration file. + Finally it enables the PMC440 board support. -commit 1378df792a7ff3abd1bf54a63f5475784f5b083c -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 24 19:33:38 2007 +0100 + Signed-off-by: Matthias Fuchs - drivers/serial : move serial drivers to drivers/serial +commit 407843a582560fc5231299561ab3c2b6b6cd3397 +Author: Matthias Fuchs +Date: Fri Dec 28 17:07:18 2007 +0100 - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + ppc4xx: Add FPGA support and BSP commands for PMC440 boards -commit 2439e4bfa111babf4bc07ba20efbf3e36036813e -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Wed Nov 21 21:19:24 2007 +0100 + This patch adds some BSP commands and FPGA booting support + for esd's PMC440 boards. - drivers/net : move net drivers to drivers/net + Signed-off-by: Matthias Fuchs - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD +commit 72c5d52aedcce35e4b4fa5895605554825b6a76f +Author: Matthias Fuchs +Date: Fri Dec 28 17:07:14 2007 +0100 -commit 352d259130b349fe9593b8dada641bd78a9659e5 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Tue Nov 20 20:41:48 2007 +0100 + ppc4xx: Add initial esd PMC440 board files - drivers/video : move video drivers to drivers/video + This patch adds the first files for the new esd PMC440 boards. + The next two patches will complete the PMC440 board support. - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Matthias Fuchs -commit 73646217186aa17afc8e305c5f06f06dd335eaad -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Tue Nov 20 20:33:09 2007 +0100 +commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5 +Author: Matthias Fuchs +Date: Fri Dec 28 17:10:36 2007 +0100 - drivers/pcmcia : move pcmcia drivers to drivers/pcmcia + ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + - add EEPROM write protection for esd PLU405 boards. + - initialize NAND GPIOs + - use correct io accessors + - cleanup -commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Tue Nov 20 20:28:09 2007 +0100 + Signed-off-by: Matthias Fuchs - drivers/pci : move pci drivers to drivers/pci +commit 77660c4b59055d621d2a8595bd4c18bb277268fc +Author: Matthias Fuchs +Date: Fri Dec 28 17:10:44 2007 +0100 - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + ppc4xx: use correct io accessors for esd's LCD code -commit 9162352817579840d7802da6d85872b3ca003c97 -Author: Gerald Van Baren -Date: Thu Nov 22 17:23:23 2007 -0500 + This patch fixes esd's LCD dectection code to work correctly with + newer gcc versions. - Fix fdt printing for updated libfdt + Signed-off-by: Matthias Fuchs - Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup. +commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e +Author: Matthias Fuchs +Date: Fri Dec 28 17:10:42 2007 +0100 - Signed-off-by: Gerald Van Baren + ppc4xx: Maintenance patch for VOH405 boards -commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c -Author: Kumar Gala -Date: Wed Nov 21 13:30:15 2007 -0600 + - add EEPROM write protection + - initialize NAND GPIOs + - use correct io accessors + - slow down I2C clock to 100kHz + - enable ext. I2C bus + - cleanup - Add additional fdt fixup helper functions + Signed-off-by: Matthias Fuchs - Added the following fdt fixup helpers: - * do_fixup_by_prop{_u32} - Find matching nodes by property name/value - * do_fixup_by_compat{_u32} - Find matching nodes by compat +commit c05569066dbcba3fdf36d4d1943df265dc316a86 +Author: Stefan Roese +Date: Fri Dec 28 16:08:08 2007 +0100 - The _u32 variants work the same only the property they are setting - is know to be a 32-bit integer instead of a byte buffer. + ppc4xx: Enable 405EP PCI arbiter per default on all boards - Signed-off-by: Kumar Gala + In an attmemt to clean up the 4xx start.S file, I removed the enabling + of the internal 405EP PCI arbiter. This is needed for multiple other + 405EP platforms, like most of the esd 405EP. Now the internal PCI + arbiter is enabled again per default as it has been before. -commit ab544633abdd14f4dd5d92e500b73eb59ef57e67 -Author: Kumar Gala -Date: Wed Nov 21 11:11:03 2007 -0600 + Signed-off-by: Stefan Roese + Acked-by: Matthias Fuchs - Add fdt_fixup_ethernet helper to set mac addresses +commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b +Author: Stefan Roese +Date: Fri Dec 28 15:53:46 2007 +0100 - Added a fixup helper that uses aliases to set mac addresses - in the device tree based on the bd_t + ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP) - Signed-off-by: Kumar Gala + Signed-off-by: Stefan Roese + Acked-by: Matthias Fuchs -commit dbaf07ce620aab249e3502b20a986234a6af1d3a -Author: Kumar Gala -Date: Wed Nov 21 14:07:46 2007 -0600 +commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79 +Author: Stefan Roese +Date: Fri Dec 28 06:06:04 2007 +0100 - Fix warnings from import of libfdt + ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target - cmd_fdt.c: In function fdt_print: - cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type - cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type - cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type - cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type + Use correct link to nand_ecc now located in drivers/mtd/nand/ for the + platforms mentioned above. - Signed-off-by: Kumar Gala + Signed-off-by: Stefan Roese -commit 8d04f02f6224e6983f4812ea4da704950ec8539c -Author: Kumar Gala -Date: Wed Oct 24 11:04:22 2007 -0500 +commit b568fd25574181a3b12ae3d66b2913903442cb83 +Author: Matthias Fuchs +Date: Thu Dec 27 17:03:46 2007 +0100 - Update libfdt from device tree compiler (dtc) + Remove CPCI440 board - Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from - the device tree compiler (dtc) project. + This board never left prototyping state and it + became a millstone round my neck. So remove it. - Signed-off-by: Kumar Gala + Signed-off-by: Matthias Fuchs -commit e93becf80d732b64aef81b23e8b6ece02c40533d -Author: Kumar Gala -Date: Sat Nov 3 19:46:28 2007 -0500 +commit c591dffe0cbacd896ccbad06011fe6d6afa080da +Author: Larry Johnson +Date: Thu Dec 27 11:28:51 2007 -0500 - Move do_fixup* for libfdt into common code + Add support for Korat PPC440EPx board - Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 - into common/fdt_support.c and renamed: + These patches add support for the PPC440EPx-based "Korat" board to + U-Boot. They are based primarily on support for the Sequoia board. - do_fixup() -> do_fixup_by_path() - do_fixup_u32() -> do_fixup_by_path_u32() + Signed-off-by: Larry Johnson - Signed-off-by: Kumar Gala +commit 87dc096829e6a6363f4fdd73653b0093a85adbe0 +Author: Larry Johnson +Date: Sat Dec 22 15:16:25 2007 -0500 -commit f738b4a75998f42a7408defadc9baac7a31c92db -Author: Kumar Gala -Date: Thu Oct 25 16:15:07 2007 -0500 + Add configuration file for Korat board - Make no options to fdt print default to '/' + This patch supplies the configuration file for the Korat PPC440EPx- + processor board. - Signed-off-by: Kumar Gala + Signed-off-by: Larry Johnson -commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7 -Author: Kumar Gala -Date: Wed Oct 24 10:21:57 2007 -0500 +commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5 +Author: Larry Johnson +Date: Sat Dec 22 15:16:11 2007 -0500 - Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt + Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile - Removed: - fdt_node_is_compatible - fdt_find_node_by_type - fdt_find_compatible_node + Signed-off-by: Larry Johnson - To ease merge of newer libfdt as we aren't using them anywhere at this time. +commit aba19604d848b2838cfb9ebe818909e6a216058e +Author: Larry Johnson +Date: Thu Dec 27 10:54:48 2007 -0500 - Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same - reason. + Add 440EPx DDR2 SPD DIMM support - Signed-off-by: Kumar Gala + This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM + controller. It should also work on the 440GRx. It is based on the DDR2 + SPD code for the 440EP/440EPx, but makes no provision for DDR1 support. -commit 98e2867cc85409b919f862e6c16026461ec955df -Author: Grant Likely -Date: Wed Nov 21 09:19:37 2007 -0700 + This code has been tested on prototype Korat boards with three Kingston + DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC + (two ranks). The Korat board has a single DIMM socket, but support has + been provided (though not tested) for boards with two DIMM sockets. - [BUILD] Remove libraries when updating autoconf.mk + Signed-off-by: Larry Johnson - Fix library problems caused by conditional compilation. Using - autoconf.mk to decide which files to compile has caused a problem when - changing configuration from one board to another without clearing out - the library (*.a) files. +commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f +Author: Larry Johnson +Date: Sat Dec 22 15:15:30 2007 -0500 - It used to be that the linker was always passed the same list of .o - files when building the .a files. However, that is not longer true - with conditional compilation. Now, a different board config will have - a different file list passed to the linker. The problem occurs when - a library has already been built and the board config is changed. + Copy 440EPx/GRx SDRAM data-eye search to common directory - Since the linker will update instead of replace a preexisting library, - then if the file list changes to remove some object files the old - objects will still exist in the library. + This patch creates a non-board-specific file for performing the SDRAM + data-eye search. It also adds ECC error checking to the test of valid + data on readback when ECC is enabled. - The solution is to remove all old library files when autoconf.mk is - made. + Signed-off-by: Larry Johnson - Signed-off-by: Grant Likely +commit c46f53333b22b1f9098676bea8884fc7db820cf3 +Author: Larry Johnson +Date: Sat Dec 22 15:15:13 2007 -0500 -commit ed1353d74b9ce8a7fcd660570b848a184d614b5f -Author: Kumar Gala -Date: Wed Nov 21 08:49:50 2007 -0600 + Add definitions for 440EPx/GRx SDRAM controller to ppc440.h - [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile + This patch adds the Denali SDRAM controller definitions to "ppc440.h". + It also fixes two typos in the definitions, so the board-specific + "sdram.h" files containing these definitions are also fixed to avoid + compiler warnings. - Modify libfdt/Makefile to conditionally compile the *.c files based - on the board config. + Signed-off-by: Larry Johnson + +commit c348578bf612d0c56d8d376d23cae16defbd86af +Author: Larry Johnson +Date: Thu Dec 27 10:50:55 2007 -0500 + + Add Ethernet 1000BASE-X support for PPC4xx + + This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol + is defined, the PHY will advertise it's capabilities for autonegotiation + based on the capabilities shown in the PHY's status registers, including + 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will + advertise hard-coded capabilities, as before. + + Signed-off-by: Larry Johnson + +commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3 +Author: Larry Johnson +Date: Thu Dec 27 09:52:17 2007 -0500 + + Add driver for National Semiconductor LM73 temperature sensor + + This driver is based on the driver for the LM75. + + Signed-off-by: Larry Johnson + +commit 12618278688ea9b3d76536960a5ad2e3790fac40 +Author: Larry Johnson +Date: Sat Dec 22 15:14:00 2007 -0500 + + Add driver for STMicroelectronics M41T60 RTC + + This driver is based on the driver for the M41T11. In the intended + application, the RTC will be powered by a large capacitor, rather than a + battery. The driver therefore checks to see whether the RTC has lost + power. The chip's OUT bit is normally reset from its power-up state. If + the OUT bit is read as set, or if the date and time are not valid, then the + RTC is assumed to have lost power, and its date and time are reset to + 1900-01-01 00:00:00. + + Support for adjusting the speed of the clock to improve accuracy is + provided through an environment variable. + + Signed-off-by: Larry Johnson + +commit d3471173e14b7544bb60339eda8d3d3906694b0a +Author: Larry Johnson +Date: Sat Dec 22 15:34:39 2007 -0500 + + Use out_be32() and friends to access memory-mapped registers in sequoia.c + + Signed-off-by: Larry Johnson + +commit c68f59fe3ec16769f82b5fca7421983c336d3aac +Author: Larry Johnson +Date: Sat Dec 22 15:34:20 2007 -0500 + + Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia + + Signed-off-by: Larry Johnson + +commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8 +Author: Larry Johnson +Date: Sat Dec 22 15:23:50 2007 -0500 + + Cosmetic changes to ECC POST for AMCC Denali core + + Signed-off-by: Larry Johnson + +commit 2e583d6c81034f80a267b89fa55498ae063ccef1 +Author: Stefan Roese +Date: Wed Dec 26 20:20:19 2007 +0100 + + ppc4xx: Fix compilation problem in 405 cache POST test + + Signed-off-by: Stefan Roese + +commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708 +Author: Stefan Roese +Date: Sat Dec 22 12:20:09 2007 +0100 + + ppc4xx: Move virtual address of POST cache test to bigger address + + On Sequoia & LWMON5 the virtual address of the POST cache test is now + moved to a bigger address. This enables usage of more memory on those + boards. + + Signed-off-by: Stefan Roese + +commit d91722102cf63f77a0148ed3f3d54a26d87575e9 +Author: Stefan Roese +Date: Sat Dec 22 12:18:26 2007 +0100 + + ppc4xx: Fix problem in 44x cache POST routine + + As repoted by Larry Johnson, running "diag run cache" caused a crash + in U-Boot. This problem was introduced by a patch that removed the + TLB entry for the cache test after the test has completed. Since this + TLB was only setup once, a 2nd attempt to run this cache test + failed with a crash. Now this TLB entry is created every time the + routine is called. + + Signed-off-by: Stefan Roese + +commit b0265b576bb8fa9465f99e99c323768b562fadc2 +Author: Stefan Roese +Date: Fri Dec 21 07:51:29 2007 +0100 + + ppc4xx: Update Makalu fdt support + + Signed-off-by: Stefan Roese + +commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea +Author: Stefan Roese +Date: Wed Dec 19 09:05:40 2007 +0100 + + ppc4xx: Add fdt support to AMCC Katmai eval board + + Signed-off-by: Stefan Roese + +commit 328a340392a5df9aaf00792be989df73e750859e +Author: Stefan Roese +Date: Tue Dec 18 08:44:51 2007 +0100 + + ppc4xx: fdt: Cleanup setup of cpu node setup + + Now the cpu node setup ("timebase-frequency" and "clock-frequency") is + without using the absolute path to the cpu node. This makes it possible + to use this U-Boot version with both versions of cpu-node naming + "cpu@0" and the former "PowerPC,440EPx@0". + + Signed-off-by: Stefan Roese + +commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b +Author: Stefan Roese +Date: Mon Dec 17 17:26:21 2007 +0100 + + ppc4xx: Fix lwmon5 compilation problem + + Now that the 440EPx ECC test is not board specific anymore + remove this Makefile. + + Signed-off-by: Stefan Roese + +commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62 +Author: Anatolij Gustschin +Date: Wed Dec 5 17:43:20 2007 +0100 + + Fix ppc4xx clear_bss() code + + ppc4xx clear_bss() fails if BSS segment size is not + divisible by 4 without remainder. This patch provides + fix for this problem. + + Signed-off-by: Anatolij Gustschin + +commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d +Author: Niklaus Giger +Date: Fri Nov 30 18:35:11 2007 +0100 + + PPC4xx: Minimal changes to add vxWorks support + + Signed-off-by: Niklaus Giger + +commit 052440b022ca8981d39b6f8c10d1aa6326f47480 +Author: Markus Klotzbücher +Date: Fri Nov 23 13:09:18 2007 +0100 + + ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config + + When using dhcp/bootp the "netmask" environment variable is not + set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is + desireable, so the following patch adds this this option to the board + config. + + Signed-off-by: Markus Klotzbuecher + Signed-off-by: Stefan Roese + +commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e +Author: Larry Johnson +Date: Sat Oct 27 12:48:15 2007 -0400 + + Fix/enhance ECC POST for 440EPx/GRx + + This patch allows the ECC POST to be used for different boards with the + PPC440 Denali SDRAM controller. Modifications include skipping the test + if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization + to prevent timing errors. + + Signed-off-by: Larry Johnson + +commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4 +Author: Larry Johnson +Date: Sat Oct 27 12:48:05 2007 -0400 + + PPC4xx: Move/rename ECC POST for 440EPx/GRx + + Signed-off-by: Larry Johnson + +commit c29d2d3680046d430022c55e50fcb27f5866517e +Author: Matthias Fuchs +Date: Fri Dec 14 11:20:33 2007 +0100 + + ppc4xx: use correct io accessors for 4xx ethernet POST + + Signed-off-by: Matthias Fuchs + +commit ba79fde58a48c0a6ff8e2a96caba951594142203 +Author: Matthias Fuchs +Date: Fri Dec 14 11:19:56 2007 +0100 + + ppc4xx: fix flush + invalidate_dcache_range arguments + + flush + invalidate_dcache_range() expect the start and stop+1 address. + So the stop address is the first address behind (!) the range. + + Signed-off-by: Matthias Fuchs + +commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd +Author: Stefan Roese +Date: Fri Dec 14 08:41:29 2007 +0100 + + ppc4xx: fdt: use fdt_fixup_ethernet() + + By using aliases in the dts file, the ethernet node fixup is + much easier with the recently added functions. + + Please note that the dts file needs the aliases for this to work. + + Signed-off-by: Stefan Roese + +commit 136288847e3b04f2ff357a067ad45e10afa0a24c +Author: Stefan Roese +Date: Thu Dec 13 14:52:53 2007 +0100 + + ppc4xx: Bring 4xx fdt support up-to-date + + This patch update the 4xx fdt support. It enabled fdt booting + on the AMCC Kilauea and Sequoia for now. More can follow later + quite easily. + + Signed-off-by: Stefan Roese + +commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e +Author: Stefan Roese +Date: Thu Dec 27 07:50:54 2007 +0100 + + cfi_flash: Add missing check for erased dest to flash_write_cfibuffer() + + The check for an sufficiently erased destination was missing in the + buffered write function of the cfi flash driver (when + CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that + writing to such a region will fail with the currect error message. + + Signed-off-by: Stefan Roese + +commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994 +Author: Martin Krause +Date: Mon Nov 12 10:56:17 2007 +0100 + + Some configuration updates for the TQM5200 based TB5200 board: + + - enable command line history + - increase malloc space (because of bigger flash sectors) + + Signed-off-by: Martin Krause + +commit e318d9e9021a0af7508171f84ed09d0e79f0284e +Author: Martin Krause +Date: Thu Sep 27 11:10:08 2007 +0200 + + TQM8xx: use the CFI flash driver on all TQM8xx boards + + Signed-off-by: Martin Krause + +commit 11d9eec479b470eab9242ab937fca70a876d9376 +Author: Martin Krause +Date: Wed Sep 26 17:55:56 2007 +0200 + + TQM885D: adjust for doubled flash sector size + some minor fixes + + Signed-off-by: Martin Krause + +commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83 +Author: Jens Gehrlein +Date: Wed Sep 26 17:55:54 2007 +0200 + + TQM885D: Exchanged SDRAM timing by a more relaxed timing. + + CAS-Latency=2, Write Recovery Time tWR=2 + The max. supported bus frequency is 66 MHz. Therefore, changed + threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz. + + Signed-off-by: Martin Krause + +commit b988b8cd443989be65161888eea0127ad03f846f +Author: Martin Krause +Date: Wed Sep 26 17:55:56 2007 +0200 + + TQM885D: use calculated cpuclk instead of measuring it + + On the TQM885D the measurement of cpuclk with the PIT reference + timer ist not necessary. Since all module variants use the same + external 10 MHz oscillator, the cpuclk only depends on the PLL + configuration - which is readable by software. + + Signed-off-by: Martin Krause + +commit 492c7049869348d31168de8dad89651315e468e0 +Author: Jens Gehrlein +Date: Thu Sep 27 14:54:46 2007 +0200 + + TQM885D: fix SDRAM refresh + + At 133 MHz the current SDRAM refresh rate is too fast + (measured 4 * 1.17 us). + CFG_MAMR_PTA changes from 39 to 128. This result + in a refresh rate of 4 * 7.8 us at the default clock + 66 MHz. At 133 MHz the value will be then 4 * 3.8 us. + This is a compromise until a new method is found to + adjust the refresh rate. + + Signed-off-by: Martin Krause + +commit dabad4b9bc46908e301f73ce76b38b23626a96e9 +Author: Jens Gehrlein +Date: Thu Sep 27 14:54:46 2007 +0200 + + TQM860M: Support for 10col SDRAMs, max. 128 MiB + + Signed-off-by: Martin Krause + +commit 61fb15c516fef5631e305f1976d7b3a679725856 +Author: Wolfgang Denk +Date: Thu Dec 27 01:52:50 2007 +0100 + + Fix coding style issues; update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit 467bcee11fe26ad422f2de971aa70866079870f2 +Author: Haavard Skinnemoen +Date: Fri Dec 14 15:36:18 2007 +0100 + + cfi_flash: Add manufacturer-specific fixups + + Run fixups based on the JEDEC manufacturer ID independent of the + command set ID. + + This changes current behaviour: Previously, geometry reversal for AMD + chips were done based on the command set ID, while they are now done + based on the JEDEC manufacturer and device ID. + + Also add fixup for top-boot Atmel chips. A fixup is needed for + AT49BV6416(T) too, but since u-boot currently only reads the low byte + of the device ID, there's no way to tell it apart from AT49BV642D, + which should not have this fixup. Since AT49BV642D support is + necessary to get ATNGW100 board support into mainline, I've commented + out the fixup for now. + + Signed-off-by: Haavard Skinnemoen + +commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a +Author: Haavard Skinnemoen +Date: Fri Dec 14 15:36:17 2007 +0100 + + cfi_flash: Add cmdset-specific init functions + + Move things like reading JEDEC IDs and fixing up geometry reversal + into separate functions. The geometry reversal fixup is now performed + by altering the qry structure directly, which makes the sector init + code slightly cleaner. + + Signed-off-by: Haavard Skinnemoen + +commit e23741f4a6d8047520ef0d4971762749b3587d32 +Author: Haavard Skinnemoen +Date: Fri Dec 14 15:36:16 2007 +0100 + + cfi_flash: Read whole QRY structure in one go + + Read out the whole CFI Standard Query structure after successful cfi + identification. This allows subsequent code to access this information + directly without having to go through flash_read_uchar() and friends. + + Signed-off-by: Haavard Skinnemoen + +commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db +Author: Haavard Skinnemoen +Date: Mon Dec 17 11:02:44 2007 +0100 + + AVR32: Fix logic inversion in disable_interrupts() + + disable_interrupts() should return nonzero if interrupts were + _enabled_ before, not disabled. + + Signed-off-by: Haavard Skinnemoen + +commit acac475212cbedb17b321a363a1c878e2b47b37f +Author: Haavard Skinnemoen +Date: Fri Dec 14 16:51:22 2007 +0100 + + AVR32: Enable interrupts at bootup + + The timer code depends on the timer interrupt to keep track of the + upper 32 bits of the cycle counter. This obviously doesn't work when + interrupts are disabled the whole time. + + Signed-off-by: Haavard Skinnemoen + +commit 9570bcd87f4db255514f43b6701746c412f8fef0 +Author: Haavard Skinnemoen +Date: Thu Nov 15 10:03:45 2007 +0100 + + AVR32: Fix wrong pin setup for USART3 + + As reported by Gerhard Berghofer: + + in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18 + instead of PB18 and PB19. + + which is obviously correct. There's currently no code that uses + USART3, but custom boards may run into problems. + + Signed-off-by: Haavard Skinnemoen + +commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918 +Author: Haavard Skinnemoen +Date: Thu Nov 1 12:44:20 2007 +0100 + + README: Remove ATSTK1000 daughterboard list + + As noted by Kim Phillips, these lists tend to become out of date. + + Signed-off-by: Haavard Skinnemoen + +commit c81cbbad21cb0ae983e2e796211202234cdc8be2 +Author: Haavard Skinnemoen +Date: Tue Oct 30 14:56:36 2007 +0100 + + Add ATSTK100[234] to MAINTAINERS + + Add all the ATSTK1000 daughterboards to MAINTAINERS along with their + "mother". Also update the entry for ATSTK1000 to be not only about the + AP7000 CPU; it's intended to handle all CPUs in the AT32AP family. + + Signed-off-by: Haavard Skinnemoen + +commit 64ff2357b1727213803591813dbc779c924bf772 +Author: Haavard Skinnemoen +Date: Mon Oct 29 13:02:54 2007 +0100 + + AVR32: Add support for the ATSTK1004 board + + ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, + which is a derivative of AT32AP7000. + + Signed-off-by: Haavard Skinnemoen + +commit 667568db157f374b85abd7e03596ddd1f0b25681 +Author: Haavard Skinnemoen +Date: Mon Oct 29 13:02:54 2007 +0100 + + AVR32: Add support for the ATSTK1003 board + + ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, + which is a derivative of AT32AP7000. + + Signed-off-by: Haavard Skinnemoen + +commit 5fee84a794a51ec830548cda485a770efb018b92 +Author: Haavard Skinnemoen +Date: Mon Oct 29 13:23:33 2007 +0100 + + AVR32: Make some AT32AP700x peripherals optional + + Add a chip-features file providing definitions of the form + + AT32AP700x_CHIP_HAS_ + + to indicate the availability of the given peripheral on the currently + selected chip. + + Signed-off-by: Haavard Skinnemoen + +commit 36f28f8a9605ee5dcfa330482cfc62171261af97 +Author: Haavard Skinnemoen +Date: Mon Oct 29 13:09:56 2007 +0100 + + AVR32: Rename at32ap7000 -> at32ap700x + + The SoC-specific code for all the AT32AP700x CPUs is practically + identical; the only difference is that some chips have less features + than others. By doing this rename, we can add support for the AP7000 + derivatives simply by making some features conditional. + + Signed-off-by: Haavard Skinnemoen + +commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e +Author: Haavard Skinnemoen +Date: Fri Jun 29 18:22:34 2007 +0200 + + atmel_mci: Show SR when block read fails + + Show controller status as well as card status when an error occurs + during block read. + + Signed-off-by: Haavard Skinnemoen + +commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d +Author: Stefan Roese +Date: Thu Dec 13 14:52:53 2007 +0100 + + ppc4xx: Bring 4xx fdt support up-to-date + + This patch update the 4xx fdt support. It enabled fdt booting + on the AMCC Kilauea and Sequoia for now. More can follow later + quite easily. + + Signed-off-by: Stefan Roese + +commit 12d30aa79779c2aa7a998bbae4c075f822a53004 +Author: Haavard Skinnemoen +Date: Thu Dec 13 12:56:34 2007 +0100 + + cfi_flash: Use map_physmem() and unmap_physmem() + + Use map_physmem() and unmap_physmem() to convert from physical to + virtual addresses. This gives the arch a chance to provide an uncached + mapping for flash accesses. + + Signed-off-by: Haavard Skinnemoen + +commit 4d7d6936eb29af7cca330937808312aa5f61454d +Author: Haavard Skinnemoen +Date: Thu Dec 13 12:56:33 2007 +0100 + + Introduce map_physmem() and unmap_physmem() + + map_physmem() returns a virtual address which can be used to access a + given physical address without involving the cache. unmap_physmem() + should be called when the virtual address returned by map_physmem() is + no longer needed. + + This patch adds a stub implementation which simply returns the + physical address cast to a uchar * for all architectures except AVR32, + which converts the physical address to an uncached virtual mapping. + unmap_physmem() is a no-op on all architectures, but if any + architecture needs to do such mappings through the TLB, this is the + hook where those TLB entries can be invalidated. + + Signed-off-by: Haavard Skinnemoen + +commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d +Author: Haavard Skinnemoen +Date: Thu Dec 13 12:56:32 2007 +0100 + + cfi_flash: Introduce read and write accessors + + Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use + them to access the flash memory. This makes it clearer when the flash + is actually being accessed; merely dereferencing a volatile pointer + looks just like any other kind of access. + + Signed-off-by: Haavard Skinnemoen + +commit 812711ce6b3a386125dcf0d6a59588e461abbb87 +Author: Haavard Skinnemoen +Date: Thu Dec 13 12:56:31 2007 +0100 + + Implement __raw_{read,write}[bwl] on all architectures + + This adds implementations of __raw_read[bwl] and __raw_write[bwl] to + m68k, ppc, nios and nios2. The m68k and ppc implementations were taken + from Linux. + + Signed-off-by: Haavard Skinnemoen + +commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd +Author: Haavard Skinnemoen +Date: Sat Oct 6 18:55:36 2007 +0200 + + cfi_flash: Reorder functions and eliminate extra prototypes + + Reorder the functions in cfi_flash.c so that each function only uses + functions that have been defined before it. This allows the static + prototype declarations near the top to be eliminated and might allow + gcc to do a better job inlining functions. + + Signed-off-by: Haavard Skinnemoen + +commit 3055793bcbdf24b1f8117f606ffb766d32eb766f +Author: Haavard Skinnemoen +Date: Thu Dec 13 12:56:29 2007 +0100 + + cfi_flash: Make some needlessly global functions static + + Make functions not declared in any header file static. + + Signed-off-by: Haavard Skinnemoen + +commit 7e5b9b471518c5652febc68ba62b432193d6abf4 +Author: Haavard Skinnemoen +Date: Thu Dec 13 12:56:28 2007 +0100 + + cfi_flash: Break long lines + + This patch tries to keep all lines in the cfi_flash driver below 80 + columns. There are a few lines left which don't fit this requirement + because I couldn't find any trivial way to break them (i.e. it would + take some restructuring, which I intend to do in a later patch.) + + Signed-off-by: Haavard Skinnemoen + +commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a +Author: Bartlomiej Sieka +Date: Tue Dec 11 13:59:57 2007 +0100 + + CFI: synchronize command offsets with Linux CFI driver + + Fixes non-working CFI Flash on the Inka4x0 board. + + Signed-off-by: Bartlomiej Sieka + +commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d +Author: Kumar Gala +Date: Fri Dec 7 12:17:34 2007 -0600 + + Handle MPC85xx PCIe reset errata (PCI-Ex 38) + + On the MPC85xx boards that have PCIe enable the PCIe errata fix. + (MPC8544DS, MPC8548CDS, MPC8568MDS). + + Signed-off-by: Kumar Gala + +commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c +Author: Kumar Gala +Date: Fri Dec 7 12:04:30 2007 -0600 + + Update Freescale MPC85xx ADS/CDS/MDS board config + + * Enabled CONFIG_CMD_ELF + + Signed-off-by: Kumar Gala + +commit d435793229ce29a42797c1edc39f5b34f987f91a +Author: Kumar Gala +Date: Fri Dec 7 04:59:26 2007 -0600 + + Handle Asynchronous DDR clock on 85xx + + The MPC8572 introduces the concept of an asynchronous DDR clock with + regards to the platform clock. + + Introduce get_ddr_freq() to report the DDR freq regardless of sync/async + mode. + + Signed-off-by: Kumar Gala + +commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10 +Author: Kumar Gala +Date: Thu Nov 29 10:34:28 2007 -0600 + + Update Freescale MPC85xx ADS/CDS/MDS board config + + * Removed some misc environment setup + * Enabled CONFIG_CMDLINE_EDITING + + Signed-off-by: Kumar Gala + +commit 415a613babb84d5e5d5b42e8e553868c71fc3a64 +Author: Kumar Gala +Date: Thu Nov 29 10:47:44 2007 -0600 + + Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. + + Minor path corrections needed to ensure buildability. + + Signed-off-by: Kumar Gala + +commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf +Author: Kumar Gala +Date: Thu Nov 29 10:16:18 2007 -0600 + + Move the MPC8540 ADS board under board/freescale. + + Minor path corrections needed to ensure buildability. + + Signed-off-by: Kumar Gala + +commit 870ceac5b3a3486c109396e005af81ae762b5710 +Author: Kumar Gala +Date: Thu Nov 29 10:14:50 2007 -0600 + + Move the MPC8560 ADS board under board/freescale. + + Minor path corrections needed to ensure buildability. + + Signed-off-by: Kumar Gala + +commit acbca876fb3fec25cd9c55b0efc81ff618ff5262 +Author: Kumar Gala +Date: Thu Nov 29 10:13:47 2007 -0600 + + Move the MPC8568 MDS board under board/freescale. + + Minor path corrections needed to ensure buildability. + + Signed-off-by: Kumar Gala + +commit a853d56c59b33415304531443633808736acfc6e +Author: Kumar Gala +Date: Thu Nov 29 02:18:59 2007 -0600 + + Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx + + We already had defines for LAWAR_TRGT_IF_* that we should use + rather than creating new ones. Also, added some missing defines for + PCIE targets. + + Signed-off-by: Kumar Gala + +commit 04db400892da37b76a585e332a0c137954ad2015 +Author: Kumar Gala +Date: Thu Nov 29 02:10:09 2007 -0600 + + Stop using immap_t on 85xx + + In the future the offsets to various blocks may not be in same location. + Move to using CFG_MPC85xx_*_ADDR as the base of the registers + instead of getting it via &immap. + + Signed-off-by: Kumar Gala + +commit 2714223f8e04ab3e4133ff65872eef366d90bfea +Author: Kumar Gala +Date: Thu Nov 29 01:23:09 2007 -0600 + + Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt + + Signed-off-by: Kumar Gala + +commit c480861bf000156e6a3e932c258db59ff2212dd3 +Author: Kumar Gala +Date: Thu Nov 29 01:06:19 2007 -0600 + + Update MPC8568 MDS to use libfdt + + Updated the MPC8568 MDS config to use libfdt and assume use of aliases for + ethernet, pci, and serial for the various fixups that are done. + + Signed-off-by: Kumar Gala + +commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7 +Author: Haiying Wang +Date: Wed Nov 14 15:52:06 2007 -0500 + + Add PCI Express support on MPC8568MDS + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit b90d25497625b90ffa3f2911a0895ca237556ff5 +Author: Kumar Gala +Date: Thu Nov 29 00:11:44 2007 -0600 + + Update MPC85xx CDS to use libfdt + + Updated the MPC85xx CDS config to use libfdt and assume use of aliases for + ethernet, pci, and serial for the various fixups that are done. + + Signed-off-by: Kumar Gala + +commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255 +Author: Kumar Gala +Date: Wed Nov 28 22:54:27 2007 -0600 + + Update MPC8540 ADS to use libfdt + + Updated the MPC8540 ADS config to use libfdt and assume use of aliases for + ethernet, pci, and serial for the various fixups that are done. + + Signed-off-by: Kumar Gala + +commit 5ce715802f6c50dc78b3405b92f184b1e3710519 +Author: Kumar Gala +Date: Wed Nov 28 22:40:31 2007 -0600 + + Update MPC8560 ADS to use libfdt + + Updated the MPC8560 ADS config to use libfdt and assume use of aliases for + ethernet, pci, and serial for the various fixups that are done. + + Signed-off-by: Kumar Gala + +commit aafeefbdb8b029f5ca2a195598d0a501a606eea9 +Author: Kumar Gala +Date: Wed Nov 28 00:36:33 2007 -0600 + + Stop using immap_t for cpm offset on 85xx + + In the future the offsets to various blocks may not be in same location. + Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers + instead of getting it via &immap->im_cpm. + + Signed-off-by: Kumar Gala + +commit f59b55a5b8fcadaa99781ba48e7a38e956afa527 +Author: Kumar Gala +Date: Tue Nov 27 23:25:02 2007 -0600 + + Stop using immap_t for guts offset on 85xx + + In the future the offsets to various blocks may not be in same location. + Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers + instead of getting it via &immap->im_gur. + + Signed-off-by: Kumar Gala + +commit 50c03c8cf494d91cdec39670d95337c743e16ec9 +Author: Kumar Gala +Date: Tue Nov 27 22:42:34 2007 -0600 + + Update MPC8544 DS config + + * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2 + * Removed some misc environment setup + * Moved to using fdtfile & fdtaddr as fdt env var names + * Enabled CONFIG_CMDLINE_EDITING + + Signed-off-by: Kumar Gala + +commit addce57e2e4c49e77ffb2020a84690713bb18b47 +Author: Kumar Gala +Date: Mon Nov 26 17:12:24 2007 -0600 + + Update MPC8544DS to use libfdt + + Updated the MPC8544DS config to use libfdt and assume use of aliases for + ethernet, pci, and serial for the various fixups that are done. + + Signed-off-by: Kumar Gala + +commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65 +Author: Kumar Gala +Date: Thu Nov 29 00:15:30 2007 -0600 + + Add libfdt based ft_cpu_setup for mpc85xx + + Signed-off-by: Kumar Gala + +commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9 +Author: Stefan Roese +Date: Tue Dec 11 13:38:19 2007 +0100 + + ppc4xx: Correct GPIO offset in gpio_config() + + Thanks to Gary Jennejohn for pointing this out. + + Signed-off-by: Stefan Roese + +commit 8809a2713b1ceaf3da55d9d785470294f15de06a +Author: Stefan Roese +Date: Tue Dec 11 11:46:01 2007 +0100 + + rtc: Fix merging problem + + Signed-off-by: Stefan Roese + +commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b +Author: Stefan Roese +Date: Sat Dec 8 14:47:34 2007 +0100 + + ppc4xx: 405EX: Correctly enable USB pins + + This patch selects the USB data pins in the 405EX GPIO and MFC (multi + function control) registers. This is done for the AMCC Kilauea and + Makalu eval boards. + + Signed-off-by: Stefan Roese + +commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39 +Author: Stefan Roese +Date: Sat Dec 8 08:25:09 2007 +0100 + + CFI: Coding style cleanup + + Signed-off-by: Stefan Roese + +commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 +Author: Michael Schwingen +Date: Fri Dec 7 23:35:02 2007 +0100 + + CFI: support JEDEC flash roms in CFI-flash framework + + The following patch adds support for non-CFI flash ROMS, by hooking into the + CFI flash code and using most of its code, as recently discussed here in the + thread "Mixing CFI and non-CFI flashs". + + Signed-off-by: Michael Schwingen + Signed-off-by: Stefan Roese + +commit c01b17dd856fa120b2970f50d9598546a4927ec3 +Author: Gerald Van Baren +Date: Wed Nov 28 21:24:50 2007 -0500 + + Conditionally compile fdt_fixup_ethernet() + + Fix compiler warnings: On boards that don't have ethernets defined, + don't compile fdt_fixup_ethernet(). + +commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7 +Author: Kumar Gala +Date: Tue Nov 27 21:59:46 2007 -0600 + + Convert boards that set memory node to use fdt_fixup_memory() + + Signed-off-by: Kumar Gala + +commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058 +Author: Kumar Gala +Date: Mon Nov 26 17:06:15 2007 -0600 + + Added fdt_fixup_stdout that uses aliases to set linux,stdout-path + + We use a combination of the serialN alias and CONFIG_CONS_INDEX to + determine which serial alias we should set linux,stdout-path to. + + Signed-off-by: Kumar Gala + +commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc +Author: Kumar Gala +Date: Mon Nov 26 14:57:45 2007 -0600 + + Add common memory fixup function + + Add the function fdt_fixup_memory() to fixup the /memory node of the fdt + + Signed-off-by: Kumar Gala + +commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157 +Author: Kumar Gala +Date: Mon Nov 26 11:19:12 2007 -0600 + + Conditionally compile fdt_support.c + + Modify common/Makefile to conditionally compile fdt_support.c based + on CONFIG_OF_LIBFDT. + + Signed-off-by: Kumar Gala + +commit d88e7ba0980773479e1a64badb293116071b7ef0 +Author: Kumar Gala +Date: Mon Nov 26 10:41:40 2007 -0600 + + Fix build breakage due to libfdt import + + The IDS8247 got lost in the update and need an API update + do to rename of functions in libfdt. + + Signed-off-by: Kumar Gala + +commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714 +Author: Gerald Van Baren +Date: Fri Nov 23 19:43:20 2007 -0500 + + Add spaces around the = in the fdt print format. + + Signed-off-by: Gerald Van Baren + +commit 29592ecba3b932b9b152bcec6c0c0806412db4a3 +Author: Nobuhiro Iwamatsu +Date: Fri Dec 7 01:25:38 2007 +0900 + + sh: Moved driver of the SuperH dependence + + The composition of the directory in the drivers/ changed. + I moved SuperH serial driver and marubun PCMCIA driver. + + Signed-off-by: Nobuhiro Iwamatsu + +commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2 +Author: Wolfgang Denk +Date: Thu Dec 6 10:21:19 2007 +0100 + + Release v1.3.1 + + Signed-off-by: Wolfgang Denk + +commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb +Author: Wolfgang Denk +Date: Thu Dec 6 10:21:03 2007 +0100 + + ADS5121 Board: fix compile problem. + + Signed-off-by: Wolfgang Denk + +commit a27044b14a9e93678a82d7b35f202b93e7687abc +Author: Stefan Roese +Date: Thu Dec 6 05:58:43 2007 +0100 + + ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards + + This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by + setting the FIXD bit in the SDR0_MFR register. Here a description of the + symptoms: + + Problem Description + ------------------------------ + If a DMA is performed between memory and PCI with the DMA 1 Controller + using prefetch, and as a result uses a special purpose buffer selected by + the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), + the first part of the transfer sequence is performed twice. The + PPC440SPe PCI Controller requests more data than was needed such that in + the case of enforce memory protection, a host CPU exception can occur. + No data is corrupted, because data transfer is stopped in the PCI + Controller. Prefetch enable is specified by setting DMA Configuration + Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. + + Behavior that may be observed in a running system + --------------------------------------------------------------------------- + + 1. DMA performance is decreased because of the double access on the PCI bus + interface. + 2. If an illegal access to some address on the PCI bus is detected at the + system level, a machine check or similar system error may occur. + + Workarounds Available + ---------------------------------- + + 1. Do not program prefetch. Note that a prefetch command cannot be programmed + without selecting a special purpose buffer. + 2. To avoid crossing a physical boundary of the PCI slave device, add 512 + bytes of address to the PCI address range. + + This patch was originally provided by Pravin M. Bathija + from AMCC and slighly changed. + + Signed-off-by: Pravin M. Bathija + Signed-off-by: Stefan Roese + +commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a +Author: Stefan Roese +Date: Tue Dec 4 16:29:48 2007 +0100 + + ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support + + Signed-off-by: Stefan Roese + +commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d +Author: Wolfgang Denk +Date: Mon Dec 3 00:15:28 2007 +0100 + + Prepare for 1.3.1-rc1 + + Signed-off-by: Wolfgang Denk + +commit e15e33433e7c05111968dc9b434a52fd42cbd221 +Author: Stefan Roese +Date: Fri Nov 30 07:15:41 2007 +0100 + + ppc4xx: Kilauea: Add PCIe reset assertion upon power-up + + This manual PCIe reset triggering solves the problem seen with the + Intel EPRO/1000 card, which was not detected (link not established) + upon power-up reset. + + Signed-off-by: Stefan Roese + +commit 260eea5676ca46903a335686cc020b29c4ca46fe +Author: Nobuhiro Iwamatsu +Date: Thu Nov 29 01:21:54 2007 +0900 + + sh: Add SuperH boards maintainer to MAINTAINERS file + + Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. + + Signed-off-by: Nobuhiro Iwamatsu + +commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747 +Author: Nobuhiro Iwamatsu +Date: Thu Nov 29 00:13:04 2007 +0900 + + sh: Add ms7750se support in MAKEALL + + Signed-off-by: Nobuhiro Iwamatsu + +commit c7144373427a178332bf9754131c8c34c52c200a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 27 09:44:53 2007 +0100 + + sh: Add sh3 and sh4 support in MAKEALL + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 130080874a3d28450098481a262c5f7c855e908d +Author: Nobuhiro Iwamatsu +Date: Sun Nov 25 02:51:17 2007 +0900 + + sh: Add document for SuperH. + + This document is a summary of information concerning SuperH of U-Boot. + + Signed-off-by: Nobuhiro Iwamatsu + +commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d +Author: Nobuhiro Iwamatsu +Date: Sun Nov 25 02:39:31 2007 +0900 + + sh: Add marubun's pcmcia driver + + Marubun pcmcia is a chip for PCMCIA used with SuperH. + Of course, this can be used even by other architectures. + When use this driver, came to be able to use CompactFlash + and Ethernet. + + Signed-off-by: Nobuhiro Iwamatsu + +commit febd86b969b975289ed948f1ac0eb9722da41ced +Author: Nobuhiro Iwamatsu +Date: Sun Nov 25 02:32:13 2007 +0900 + + sh: Update SuperH SCIF driver + + - Changed volatile unsigned to vu_. + - Changed Makefile for kconfig. + + Signed-off-by: Nobuhiro Iwamatsu + +commit 8be760903645af09871be50ad0a6f9ebb62b311d +Author: Stefan Roese +Date: Tue Nov 27 11:57:35 2007 +0100 + + ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing + + After an error in the AMCC 405EX users manual now correctly configure + IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ + usage. + + Signed-off-by: Stefan Roese + +commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788 +Author: Wolfgang Denk +Date: Mon Nov 26 19:18:21 2007 +0100 + + Cleanup coding style; update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 25 22:39:25 2007 +0100 + + MAKEALL: add missing 512x boards in ppc + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit a340c325e668ca7386c2276387681720be9c3757 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 25 18:45:47 2007 +0100 + + Makefile : fix tags ctags etags with new drivers organization + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e +Author: Stefan Roese +Date: Mon Nov 26 15:06:14 2007 +0100 + + ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage + + As suggested by Senao, use a different EBC_PB0AP setup for 400MHz + operation. + + Signed-off-by: Stefan Roese + +commit ca1ce226287270bb01e25b8e3674c701f12edf19 +Author: Stefan Roese +Date: Mon Nov 26 15:01:45 2007 +0100 + + ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt + + Signed-off-by: Stefan Roese + +commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 25 18:45:47 2007 +0100 + + Makefile : fix tags ctags etags with new drivers organization + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 59829cc189378c142c13d2aa8d9a897d8bef3961 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 21:26:56 2007 +0100 + + drivers/mtd : move mtd drivers to drivers/mtd + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 318c0b90431f2648552e5ade78833f42652ce859 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 21:17:55 2007 +0100 + + drivers/misc : move misc drivers to drivers/misc + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 33daf5b7858807cb4ce4158c2c56524671c14c08 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 21:13:59 2007 +0100 + + drivers/block : move block drivers to drivers/block + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 0c698dcaa70275eb8814f665b545547cee013892 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 20:59:50 2007 +0100 + + drivers/rtc : move rtc drivers to drivers/rtc + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f868cc5a50757d94f36c312395481cb0f187d9e6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 20:14:44 2007 +0100 + + drivers/hwmon : move hardware monitor drviers to drivers/hwmon + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 16b195c82a18cbfd164800f17a1ef9db2e48331a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 19:46:45 2007 +0100 + + drivers/input : move input drivers to drivers/input + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e4558666293364fc3af1c1d9381ca933fa0f1275 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 19:40:11 2007 +0100 + + drivers/usb : move usb drivers to drivers/usb + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1378df792a7ff3abd1bf54a63f5475784f5b083c +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 24 19:33:38 2007 +0100 + + drivers/serial : move serial drivers to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2439e4bfa111babf4bc07ba20efbf3e36036813e +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Nov 21 21:19:24 2007 +0100 + + drivers/net : move net drivers to drivers/net + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 352d259130b349fe9593b8dada641bd78a9659e5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 20 20:41:48 2007 +0100 + + drivers/video : move video drivers to drivers/video + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 73646217186aa17afc8e305c5f06f06dd335eaad +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 20 20:33:09 2007 +0100 + + drivers/pcmcia : move pcmcia drivers to drivers/pcmcia + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 20 20:28:09 2007 +0100 + + drivers/pci : move pci drivers to drivers/pci + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9162352817579840d7802da6d85872b3ca003c97 +Author: Gerald Van Baren +Date: Thu Nov 22 17:23:23 2007 -0500 + + Fix fdt printing for updated libfdt + + Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup. + + Signed-off-by: Gerald Van Baren + +commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c +Author: Kumar Gala +Date: Wed Nov 21 13:30:15 2007 -0600 + + Add additional fdt fixup helper functions + + Added the following fdt fixup helpers: + * do_fixup_by_prop{_u32} - Find matching nodes by property name/value + * do_fixup_by_compat{_u32} - Find matching nodes by compat + + The _u32 variants work the same only the property they are setting + is know to be a 32-bit integer instead of a byte buffer. + + Signed-off-by: Kumar Gala + +commit ab544633abdd14f4dd5d92e500b73eb59ef57e67 +Author: Kumar Gala +Date: Wed Nov 21 11:11:03 2007 -0600 + + Add fdt_fixup_ethernet helper to set mac addresses + + Added a fixup helper that uses aliases to set mac addresses + in the device tree based on the bd_t + + Signed-off-by: Kumar Gala + +commit dbaf07ce620aab249e3502b20a986234a6af1d3a +Author: Kumar Gala +Date: Wed Nov 21 14:07:46 2007 -0600 + + Fix warnings from import of libfdt + + cmd_fdt.c: In function fdt_print: + cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type + cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type + cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type + cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type + + Signed-off-by: Kumar Gala + +commit 8d04f02f6224e6983f4812ea4da704950ec8539c +Author: Kumar Gala +Date: Wed Oct 24 11:04:22 2007 -0500 + + Update libfdt from device tree compiler (dtc) + + Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from + the device tree compiler (dtc) project. + + Signed-off-by: Kumar Gala + +commit e93becf80d732b64aef81b23e8b6ece02c40533d +Author: Kumar Gala +Date: Sat Nov 3 19:46:28 2007 -0500 + + Move do_fixup* for libfdt into common code + + Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 + into common/fdt_support.c and renamed: + + do_fixup() -> do_fixup_by_path() + do_fixup_u32() -> do_fixup_by_path_u32() + + Signed-off-by: Kumar Gala + +commit f738b4a75998f42a7408defadc9baac7a31c92db +Author: Kumar Gala +Date: Thu Oct 25 16:15:07 2007 -0500 + + Make no options to fdt print default to '/' + + Signed-off-by: Kumar Gala + +commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7 +Author: Kumar Gala +Date: Wed Oct 24 10:21:57 2007 -0500 + + Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt + + Removed: + fdt_node_is_compatible + fdt_find_node_by_type + fdt_find_compatible_node + + To ease merge of newer libfdt as we aren't using them anywhere at this time. + + Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same + reason. + + Signed-off-by: Kumar Gala + +commit 98e2867cc85409b919f862e6c16026461ec955df +Author: Grant Likely +Date: Wed Nov 21 09:19:37 2007 -0700 + + [BUILD] Remove libraries when updating autoconf.mk + + Fix library problems caused by conditional compilation. Using + autoconf.mk to decide which files to compile has caused a problem when + changing configuration from one board to another without clearing out + the library (*.a) files. + + It used to be that the linker was always passed the same list of .o + files when building the .a files. However, that is not longer true + with conditional compilation. Now, a different board config will have + a different file list passed to the linker. The problem occurs when + a library has already been built and the board config is changed. + + Since the linker will update instead of replace a preexisting library, + then if the file list changes to remove some object files the old + objects will still exist in the library. + + The solution is to remove all old library files when autoconf.mk is + made. + + Signed-off-by: Grant Likely + +commit ed1353d74b9ce8a7fcd660570b848a184d614b5f +Author: Kumar Gala +Date: Wed Nov 21 08:49:50 2007 -0600 + + [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile + + Modify libfdt/Makefile to conditionally compile the *.c files based + on the board config. Signed-off-by: Kumar Gala -commit 4a43719a7738712811d822ca8125427b27a55cdc -Author: Grant Likely -Date: Mon Sep 24 09:05:31 2007 -0600 +commit 4a43719a7738712811d822ca8125427b27a55cdc +Author: Grant Likely +Date: Mon Sep 24 09:05:31 2007 -0600 + + [BUILD] conditionally compile common/cmd_*.c in common/Makefile + + Modify common/Makefile to conditionally compile the cmd_*.c files based + on the board config. + + Signed-off-by: Grant Likely + +commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1 +Author: Grant Likely +Date: Mon Sep 24 09:05:31 2007 -0600 + + [BUILD] Generate include/autoconf.mk from board config files + + Use cpp and sed to postprocess config.h and import the defined values + into include/autoconf.mk. autoconf.mk is then included by config.mk to + give 'make' access to the board configuration. + + Doing this enables conditional compilation at the Makefile level instead + of by wrapping every .c file with #ifdef/#endif wrappers. + + Signed-off-by: Grant Likely + +commit 68b88999da87ab88e71e1306192905be3450198e +Author: Jon Loeliger +Date: Tue Nov 20 15:02:26 2007 -0600 + + 8610HPCD: Enable the 8610 Display Interface Unit + + Signed-off-by: Jon Loeliger + +commit 74f89faa9d1e77ed947e628d3effaa513fe05d05 +Author: Jon Loeliger +Date: Tue Nov 20 15:00:53 2007 -0600 + + Move 8610 DIU interface structure definitions to header file. + + These two structures are still needed during the + initialization and setup of the DIU hardware. + So move them to the fsl_diu_fb.h file for now. + Official "blah". + + Noticed-by: York Sun + Signed-off-by: Jon Loeliger + +commit 080c646dbf474a109c3f85718fb01ce042a38c45 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 20 20:14:18 2007 +0100 + + drivers/i2c : move i2c drivers to drivers/i2c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9a337ddc154a10a26f117fd147b009abcdeba75a +Author: Wolfgang Denk +Date: Mon Nov 19 22:20:24 2007 +0100 + + Prepare for 1.3.0 release. + + Signed-off-by: Wolfgang Denk + +commit f30ad49b16bf998b03c1a5228b6c86369d61c258 +Author: Haiying Wang +Date: Mon Nov 19 10:02:13 2007 -0500 + + Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS + + CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it. + + Signed-off-by: Haiying Wang + +commit f8c320609366176b31104d9bf5e295232e1c7f1d +Author: Shinya Kuribayashi +Date: Mon Nov 19 11:14:16 2007 +0900 + + [MIPS] board/gth2/lowlevel_init.S: Fix a build warning + + lowlevel_init.S: Assembler messages: + lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local. + + Looking at codes, the `memtest' and `clearmem' are intentional mixed + use of `global symbols' and `label' for debugging purpose. To make it + build, just disable global-symbols-use for now. As a result `memtest' + still remains as unused, but leave it be... + + Signed-off-by: Shinya Kuribayashi + +commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab +Author: Wolfgang Denk +Date: Mon Nov 19 12:59:14 2007 +0100 + + Fix build problems with mp2usb board + + Signed-off-by: Wolfgang Denk + +commit 6bf4c686afca1e86e1c384d59218f914605713bf +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 18 18:36:11 2007 +0100 + + s3c24x0: Fix usb_ohci.c missing in Makefile + and usb_ohci.c warning differ in signedness + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6073f61e078da5ddb521b56256bcc36508589883 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 18 12:55:02 2007 +0100 + + pb1x00 board: Fix u16 status declaration when PCMCIA is defined + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 8412d814ce8bf5570a2b747f1e7fd321097fe987 +Author: Wolfgang Denk +Date: Sun Nov 18 17:11:09 2007 +0100 + + Fix compiler warnings for ARM systems. + + Signed-off-by: Wolfgang Denk + +commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37 +Author: Wolfgang Denk +Date: Sun Nov 18 16:36:27 2007 +0100 + + Fix compiler warnings for PPC systems. Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit 653811a3c2b35856bf12e196dcc8c4694e28e420 +Author: Stefan Roese +Date: Sun Nov 18 14:44:44 2007 +0100 + + ppc4xx: Correct 405EX PCIe UTL register mapping + + Map 4k mem space for UTL registers for each port. + + Signed-off-by: Stefan Roese + +commit 079c2c4fa71c0d1ebef394508df9088df8a308d3 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 17 11:31:10 2007 +0100 + + Fix warning differ in signedness in net/net.c and net/nfs.c + +commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81 +Author: Shinya Kuribayashi +Date: Sat Nov 17 20:42:45 2007 +0900 + + gth2.c: Fix a warning on gth2 build. + + gth2.c: In function 'misc_init_r': + gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness + + Signed-off-by: Shinya Kuribayashi + +commit 2309c130aa4c84b91bd874a41269c923eb61b555 +Author: Stefan Roese +Date: Sat Nov 17 07:58:25 2007 +0100 + + Fix warning differ in signedness in common/cmd_scsi.c + + Signed-off-by: Stefan Roese + +commit 9ea61b57968554eaf0f474ec7e088b17d367f474 +Author: Stefan Roese +Date: Sat Nov 17 14:52:29 2007 +0100 + + ppc4xx: Update AMCC Kilauea config file + + - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) + + Signed-off-by: Stefan Roese + +commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c +Author: Shinya Kuribayashi +Date: Sat Nov 17 20:05:26 2007 +0900 + + [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker + + Current trick to pick up GNU assembler minor version does not work with the + latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to + "(GNU Binutils) ". + + $ sde-as --version |grep "GNU assembler" + GNU assembler 2.15.94 mipssde-6.02.02-20050602 + $ sde-as --version |grep "GNU assembler" |awk '{print $3}' + 2.15.94 + $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' + 15 + $ + + $ mips-linux-as --version |grep "GNU assembler" + GNU assembler (GNU Binutils) 2.18 + $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' + (GNU + $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' + (no output) + $ + + As a result of above, you'll see many noises with such binutils: + + make -C cpu/mips/ + /bin/sh: line 0: [: : integer expression expected + /bin/sh: line 0: [: : integer expression expected + make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips' + mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S + /bin/sh: line 0: [: : integer expression expected + mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S + /bin/sh: line 0: [: : integer expression expected + mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c + /bin/sh: line 0: [: : integer expression expected + + This patch simplifies the trick and makes it work with both versions of gas. + I also replace an expensive `awk (or gawk)' with `cut'. + + Signed-off-by: Shinya Kuribayashi + +commit 16664f72850846e645616da1c0fa5afcd6d15f15 +Author: Shinya Kuribayashi +Date: Sat Nov 17 20:05:26 2007 +0900 + + [MIPS] Remove useless instructions for initializing $gp. + + Signed-off-by: Shinya Kuribayashi + +commit 03c031d5660ea946c39af6e2e16267da857c609f +Author: Shinya Kuribayashi +Date: Sat Oct 27 15:27:06 2007 +0900 + + [MIPS] MIPS 4K core: Coding style cleanups + + No logical changes. + + Signed-off-by: Shinya Kuribayashi + +commit f5e429d3860bba4c6ae8bead8f78349fa24491b2 +Author: Shinya Kuribayashi +Date: Sat Nov 17 20:05:20 2007 +0900 + + [MIPS] gth2.c: Fix a warning on gth2 build. + + gth2.c: In function 'misc_init_r': + gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness + + Signed-off-by: Shinya Kuribayashi + +commit 4fbd0741b2b6441da10be93e10267122581b7079 +Author: Shinya Kuribayashi +Date: Sat Oct 27 15:22:33 2007 +0900 + + [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build. + + au1x00_eth.c: In function 'au1x00_miiphy_write': + au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void + + Signed-off-by: Shinya Kuribayashi + +commit f01320459736f156707425cf8112f98606301aa4 +Author: Shinya Kuribayashi +Date: Sat Oct 27 15:00:25 2007 +0900 + + [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error + + au1x00_eth.c: In function 'au1x00_enet_initialize': + au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function) + au1x00_eth.c:246: error: (Each undeclared identifier is reported only once + au1x00_eth.c:246: error: for each function it appears in.) + au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function) + au1x00_eth.c: In function 'au1x00_miiphy_write': + au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void + make[1]: *** [au1x00_eth.o] Error 1 + + Fixed by moving these two functions forward. + + Signed-off-by: Shinya Kuribayashi + +commit b09258c5393edd1087c5f39ae68338f16b49f8b3 +Author: Shinya Kuribayashi +Date: Sat Oct 27 15:00:25 2007 +0900 + + MAKEALL: Added missing pb1000 board + + Signed-off-by: Shinya Kuribayashi + +commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369 +Author: Shinya Kuribayashi +Date: Sat Oct 27 15:00:24 2007 +0900 + + [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S + + Signed-off-by: Shinya Kuribayashi + +commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82 +Author: Shinya Kuribayashi +Date: Sat Oct 27 15:00:24 2007 +0900 + + [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end} + + Signed-off-by: Shinya Kuribayashi + +commit 5947f6999aafa7c54c1390983d264a8463dfea8e +Author: Wolfgang Denk +Date: Sat Nov 17 02:34:38 2007 +0100 + + Update CHANGELOIG, prepare for -rc4 + + Signed-off-by: Wolfgang Denk + +commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5 +Author: Luotao Fu +Date: Wed Nov 14 18:58:33 2007 +0100 + + Fix the i2c frequency and default address in rsdproto board + + rsdproto board support has wrong I2C frequency and wrong return value + handling. + + Signed-off-by: Luotao Fu + +commit 429c180edad038f91c989cb14b478228092e7054 +Author: Wolfgang Denk +Date: Sat Nov 17 01:45:38 2007 +0100 + + powerpc: Backout relocation changes for MPC5121, too. + + Apply Grant Likely's backout to MPC5121 code, too. + + Pointed out by Rafal Jaworowski + + Signed-off-by: Wolfgang Denk + +commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8 +Author: Grant Likely +Date: Tue Nov 13 22:18:33 2007 -0700 + + powerpc: Backout relocation changes. + + Ugh. I *hate* to back this change out, but these compiler flags don't + work for relocation on all versions of GCC. I've not been able to + reproduce the environment in my setup (and hence, not been able to + find a combination that *does* work), so I've got no choice but to go + back to the old gcc flags and linker script. + + Signed-off-by: Grant Likely + +commit 5c15010efad980ad5498cc565fc1ed70df2f52b4 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 13 09:11:05 2007 +0100 + + Fixed mips_io_port_base build errors. + + This patch has been sent on: + - 29 Sep 2007 + + Although mips_io_port_base is currently a part of IDE command, it is quite + fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move + it to MIPS general part, and introduce `set_io_port_base()' from Linux. + + This patch is triggered by multiple definition of `mips_io_port_base' build + error on gth2 (and tb0229 also needs this fix.) + + board/gth2/libgth2.a(gth2.o): In function `log_serial_char': + /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' + common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here + make: *** [u-boot] Error 1 + + Signed-off-by: Shinya Kuribayashi + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422 +Author: Wolfgang Denk +Date: Sat Nov 17 01:30:40 2007 +0100 + + Fix a bug in the slave serial programming mode for the Xilinx + Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if + the most significant bit was set, which did not work on any + architecture where "char" defaulted to be an unsigned type. + + Based on a patch by Angelos Manousaridis + + Signed-off-by: Wolfgang Denk + +commit d08b7233bc252faad8339e7ca0ddfd62fa79903c +Author: Jon Loeliger +Date: Thu Nov 1 12:23:29 2007 -0500 + + 86xx: Fix broken variable reference when #def DEBUGing. + + Sometimes you can't reference the DDR2 controller variables. + + Signed-off-by: Jon Loeliger + +commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19 +Author: Jason Jin +Date: Fri Oct 26 18:32:00 2007 +0800 + + make 8610 board use pixis reset + + Signed-off-by: Jason Jin + +commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836 +Author: Jason Jin +Date: Mon Oct 29 19:26:21 2007 +0800 + + Unify pixis_reset altbank across board families + + Basically, refactor the CFG_PIXIS_VBOOT_MASK values + into the separate board config files. + + Signed-off-by: Jason Jin + Signed-off-by: Jon Loeliger + +commit 64bf555465c7926be13e1046ac0d0f05ac72829c +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Nov 7 08:19:21 2007 +0100 + + Fix warning: pointer targets in assignment differ in signedness + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 7a60ee7c6248a958c5757d3660a1702723a2786d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Nov 7 08:19:19 2007 +0100 + + Fix warning differ in signedness in common/cmd_ide.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03 +Author: Stefan Roese +Date: Fri Nov 16 14:16:54 2007 +0100 + + ppc4xx: Enable 405EX PCIe UTL register configuration + + Till now the UTL registers on 405EX were not initialized but left with + their default values. This patch new initializes some of the UTL + registers on 405EX. + + Signed-off-by: Stefan Roese + +commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9 +Author: Stefan Roese +Date: Fri Nov 16 14:00:59 2007 +0100 + + ppc4xx: Update AMCC Makalu for board rev 1.1 + + This patch adds changes needed for Makalu rev 1.1: + + - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM + - Enable 2nd ethernet port EMAC1 + - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) + - Reset PCIe ports via GPIO upon bootup + + Signed-off-by: Stefan Roese + +commit 4d4faae65e115e327425cd514c1a35146a85166b +Author: Grant Likely +Date: Mon Sep 24 09:05:31 2007 -0600 + + Group PCI and PCMCIA drivers in drivers/Makefile + + Signed-off-by: Grant Likely + +commit 5798f87dc10a496d79d3177b9f5a76488987fd35 +Author: Grant Likely +Date: Mon Sep 24 09:05:31 2007 -0600 + + Group block/flash drivers in drivers/Makefile + + Signed-off-by: Grant Likely + +commit df58c81551700f058b44cacf55a7997fa63bfe0a +Author: Grant Likely +Date: Mon Sep 24 09:05:31 2007 -0600 + + Group USB drivers in drivers/Makefile + + Signed-off-by: Grant Likely + +commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29 +Author: Grant Likely +Date: Mon Sep 24 09:05:30 2007 -0600 + + Group i2c drivers in drivers/Makefile + + Signed-off-by: Grant Likely + +commit ec00c76de0e5971273905998d62d6bb119324218 +Author: Grant Likely +Date: Mon Sep 24 09:05:30 2007 -0600 + + Group console drivers in drivers/Makefile + + Signed-off-by: Grant Likely + +commit 754f230aa01b8c789fc31f8013c2487954073300 +Author: Grant Likely +Date: Mon Sep 24 09:05:30 2007 -0600 + + Group network drivers in drivers/Makefile + + Signed-off-by: Grant Likely + +commit f0037c56b0d12cd46215124667b9f83d60ef9391 +Author: Grant Likely +Date: Mon Sep 24 09:05:30 2007 -0600 + + Build: split COBJS value into multiple lines + + This change is in preparation for condtitionial compile support in the + build system. By spliting them all into seperate lines now, subsequent + patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_) += ' will + be less invasive and easier to review + + Signed-off-by: Grant Likely + +commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4 +Author: Grant Likely +Date: Mon Sep 24 09:05:30 2007 -0600 + + Add .gitignore files + + Signed-off-by: Grant Likely + Acked-by: Kim Phillips + +commit 955413f35f054a82e40042f1dbcf501c6a05719b +Author: Grant Likely +Date: Thu Nov 15 08:27:52 2007 -0700 + + Revert "Correct relocation fixup for mpc5xx" + + This reverts commit 3649cd99ba815b6601868735765602f00ef3692b. + Signed-off-by: Grant Likely + +commit e15633888a058aacb31a62d2cf1278e1e4c236ab +Author: Grant Likely +Date: Thu Nov 15 08:24:32 2007 -0700 + + Revert "Correct fixup relocation for MPC5xxx" + + This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90. + Signed-off-by: Grant Likely + +commit 139365fbe566d0fc619a1ed04452ec5388f0cef8 +Author: Grant Likely +Date: Thu Nov 15 08:21:04 2007 -0700 + + Revert "Correct fixup relocation for mpc8220" + + This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00. + Signed-off-by: Grant Likely + +commit 70922342369e5e39b286fe21e768a239ca07a514 +Author: Grant Likely +Date: Thu Nov 15 08:20:57 2007 -0700 + + Revert "Correct fixup relocation for mpc824x" + + This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa. + Signed-off-by: Grant Likely + +commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a +Author: Grant Likely +Date: Thu Nov 15 08:20:50 2007 -0700 + + Revert "Correct fixup relocation for mpc8260" + + This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. + Signed-off-by: Grant Likely + +commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6 +Author: Grant Likely +Date: Thu Nov 15 08:20:43 2007 -0700 + + Revert "Correct fixup relocation for mpc83xx" + + This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27. + Signed-off-by: Grant Likely + +commit c93945e8f9e300860d2bf73a2549ce5794f8bd00 +Author: Grant Likely +Date: Thu Nov 15 08:20:25 2007 -0700 + + Revert "[MPC512x] Correct fixup relocation" + + This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4. + Signed-off-by: Grant Likely + +commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c +Author: Stefan Roese +Date: Thu Nov 15 14:25:09 2007 +0100 + + ppc4xx: Small AMCC Kilauea cleanup + + Remove not needed pci_target_init() function. + + Signed-off-by: Stefan Roese + +commit aee747f19b460a0e9da20ff21e90fdaac1cec359 +Author: Stefan Roese +Date: Thu Nov 15 14:23:55 2007 +0100 + + ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms + + - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE + - Cleanup of the 4xx GPIO functions + - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h + + Signed-off-by: Stefan Roese + +commit 8ada0ebf38e4073beea0309188b25d82a112a2ae +Author: Stefan Roese +Date: Thu Nov 15 14:20:08 2007 +0100 + + ppc4xx: AMCC Taihu board config file cleanup + + This patch makes the AMCC Taihu a little more compatible to the other + AMCC eval boards. + + Signed-off-by: Stefan Roese + +commit 5e71c51d74c963d3174060c078dcacf13bdd02ef +Author: Marian Balakowicz +Date: Thu Nov 15 13:37:28 2007 +0100 + + [INKA4x0] NG hardware: flash support + + Disabled and remove inka4x0 custom flash driver, use CFI flash + driver instead. + + Signed-off-by: Marian Balakowicz + +commit 5fb6d7191e206cdde0e23140fd8111caed93a595 +Author: Marian Balakowicz +Date: Thu Nov 15 13:29:55 2007 +0100 + + [INKA4x0] NG hardware: SDRAM support + + Add support for three new DDR chips that may be present on a NG + INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT. + + Cleanup board/inka4x0/mt48lc16m16a2-75.h file. + + Signed-off-by: Marian Balakowicz + +commit f23cb34c367bb27585a4fdb8a75277370e7d0596 +Author: Marian Balakowicz +Date: Thu Nov 15 13:24:43 2007 +0100 + + [INKA4x0] NG hardware: platform code update + + - Cleanup compile warnings. + - Add missing '\0' in default environment. + - Increase CFG_MONITOR_LEN to 256 KiB. + - Add required CFG_USE_PPCENV. + + Signed-off-by: Marian Balakowicz + +commit 2ae64f5135e51bb18753884d1265b99e89b5aedd +Author: Peter Pearse +Date: Thu Nov 15 08:58:00 2007 +0000 + + Remove warnings re CONFIG_EXTRA_ENV_SETTINGS + Remove warnings re onenand_read() & write() + +commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7 +Author: Peter Pearse +Date: Thu Nov 15 08:45:13 2007 +0000 + + Correction patch + +commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae +Author: Roy Zang +Date: Thu Sep 13 18:52:28 2007 +0800 + + Enable ULi1575 Ethernet support in 8610HPCD config + + Signed-off-by: Roy Zang + Acked-by: Jon Loeliger + +commit 54fd6c93c28a0a45352fff5dd92673401ff563f2 +Author: Stefan Roese +Date: Tue Nov 13 08:18:20 2007 +0100 + + ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching + + Signed-off-by: Stefan Roese + +commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93 +Author: Stefan Roese +Date: Tue Nov 13 08:06:11 2007 +0100 + + ppc4xx: Fix 405EX PCIe UTLSET register setup + + Signed-off-by: Stefan Roese + +commit 1ce55151c85d068f70317a8d65c61058b891afb4 +Author: Heiko Schocher +Date: Tue Nov 13 07:50:29 2007 +0100 + + [UC101] SRAM now with 2 MB working. + + Signed-off-by: Heiko Schocher + +commit 2d14684341109a69616e4d6016cd61402d55086f +Author: Matthias Fuchs +Date: Fri Nov 9 15:37:53 2007 +0100 + + ppc4xx: Use generic usb-ohci driver for sequoia board + + This patch makes the sequoia board use the generic usb-ohci driver + instead of cpu/ppc4xx/usb_ohci.c. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 9be659ac0868dc367caa957c5c725e46b07f6a5f +Author: Matthias Fuchs +Date: Fri Nov 9 15:37:23 2007 +0100 + + ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined + + This patch disables the 44x d-cache on 'usb start' and + reenables it on 'usb stop'. This should be seen as a + temporary fix until the generic usb-ohci driver can + life with d-cache enabled. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4 +Author: Matthias Fuchs +Date: Fri Nov 9 15:36:44 2007 +0100 + + ppc4xx: Remove redundant code from 4xx network driver + + This patch removes some redundant code and decrements the end + address of cache flush and invalidate by 1. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 5ca9881aad8c413ac2a82868a5e3719178254502 +Author: Peter Pearse +Date: Fri Nov 9 15:24:26 2007 +0000 + + Add apollon board support + Signed-off-by: Kyungmin Park + +commit b53313dbfc74525d85f1e7e0102f902d5c863beb +Author: Stefan Roese +Date: Fri Nov 9 12:19:58 2007 +0100 + + ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea + + Signed-off-by: Stefan Roese + +commit c7f69c340277935a6c19a956421852da944a365f +Author: Stefan Roese +Date: Fri Nov 9 12:18:54 2007 +0100 + + ppc4xx: Make output a little shorter on I2C bootrom detection + + Most 4xx PPC capable of using an I2C bootrom for bootstrap setting + already print a line with the information which I2C bootrom is + used for bootstrap configuration. So we don't need this extra line + with "I2C boot EEPROM en-/dis-abled". + + This patch also has a little code cleanup integrated. + + Signed-off-by: Stefan Roese + +commit 8d737a28152ec12873f8544cca1fb39a49e5e693 +Author: TsiChungLiew +Date: Thu Nov 8 12:50:18 2007 -0600 + + ColdFire: MCF5329 - Remove reset registers from CCM + + Signed-off-by: TsiChungLiew + +commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7 +Author: TsiChungLiew +Date: Thu Nov 8 12:31:11 2007 -0600 + + ColdFire: MCF5329 - Add Reset structure to immap_5329.h + + Signed-off-by: TsiChungLiew + +commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21 +Author: TsiChungLiew +Date: Thu Nov 8 12:19:01 2007 -0600 + + ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode + + Signed-off-by: TsiChungLiew + +commit 225a24b5e062ad94627424508ae814f51dbe1a34 +Author: TsiChungLiew +Date: Wed Nov 7 18:00:54 2007 -0600 + + ColdFire: MCF5445x - Update correct RAMBAR and missing linker files + + Signed-off-by: TsiChungLiew + +commit 248c7c14835f34d5d910b45e5600050e58ca6cab +Author: TsiChungLiew +Date: Wed Nov 7 17:56:15 2007 -0600 + + ColdFire: MCF532x - Update do_reset() using core reset + + Signed-off-by: TsiChungLiew + +commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4 +Author: TsiChungLiew +Date: Wed Nov 7 17:51:00 2007 -0600 + + ColdFire: Update cpu flag for 4.2-xx compiler + + Signed-off-by: TsiChungLiew + +commit 070ba56115b4da63b46e974287fa4550d4023386 +Author: York Sun +Date: Wed Oct 31 14:59:04 2007 -0500 + + 8610: Add console frame buffer support to FSL 8610 DIU driver. + + Add cfb console support to FSL 8610 DIU driver. + Inspect board version from PIXIS to obtain correct pixel format. + + Use #define CONFIG_VIDEO in config file to enable fb console. + + To switch monitor, set monitor variable to + 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS + followed by "diufb init". + + Preserve logo bitmap at the top of the fb console. + + Signed-off-by: York Sun + Signed-off-by: Jon Loeliger + +commit a877880c6949e948bd63cd6ea4e216573d2f53dd +Author: York Sun +Date: Mon Oct 29 13:58:39 2007 -0500 + + 8610: Add 8610 DIU display driver + + 1280x1024 and 1024x768 @ 32 bpp are supported now. + DVI, Single-link LVDS, Double-link LVDS are all supported. + + Environmental variable "monitor" is used to specify monitor port. + + A new command "diufb" is introduced to reinitialize monitor + and display a BMP file in the memory. So far, 1-bit, 4-bit, + 8-bit and 24-bit BMP formats are supported. + + diufb init + - initialize the diu driver + Enable the port specified in the environmental variable "monitor" + + diufb addr + - display bmp file in memory. + The bmp image should be no bigger than the resolution, 1280x1024 + for DVI and double-link LVDS, 1024x768 for single-link LVDS. + + Note, this driver allocate memory but doesn't free it after use + It is written on purpose -- to avoid a failure of reallocation + due to memory fragement. + + ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. + + Signed-off-by: York Sun + Signed-off-by: Jon loeliger + +commit 52e5ddfecdda308f75782fae206b677b1810f5f9 +Author: York Sun +Date: Wed Oct 31 10:43:59 2007 -0500 + + FSL: Add a freescale bitmap logo. + + This Freescale logo is a 340 x 128 x 4bpp BMP file + that can be displayed by the DIU Framebuffer driver. + + Signed-off-by: York Sun + Signed-off-by: Jon Loeliger + +commit 1815338fbd1c0f94f8276d2891b99caa5a05f622 +Author: York Sun +Date: Mon Oct 29 13:57:53 2007 -0500 + + 8610: Make some extra debug environment variables conditional. + + One may #define ENV_DEBUG to get them back again. + + Signed-off-by: York Sun + +commit 761421ccca80a9fb37b19c37aa61d46ef75e0647 +Author: Jason Jin +Date: Mon Oct 29 19:26:21 2007 +0800 + + 8610: Actually enable pixis_reset CONFIGs + + Signed-off-by: Jason Jin + +commit f3bceaab230b4748d0afc4109b6837308f018b40 +Author: Jason Jin +Date: Fri Oct 26 18:31:59 2007 +0800 + + Fix the BAT definition of PCI IO on 8610 board + + The address in the BAT register is aligned with the BAT size. + The original definition actually did not define BAT for PCIE2 IO. + This patch fix this. + + Signed-off-by: Jason Jin + +commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56 +Author: Jason Jin +Date: Mon Oct 29 19:26:21 2007 +0800 + + Unify pixis_reset altbank across board families + + Basically, refactor the CFG_PIXIS_VBOOT_MASK values + into the separate board config files. + + Signed-off-by: Jason Jin + Signed-off-by: Jon Loeliger + +commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba +Author: Jason Jin +Date: Fri Oct 26 18:32:00 2007 +0800 + + make 8610 board use pixis reset + + Signed-off-by: Jason Jin + +commit 9c84709eedce9c680dd695984ab7d2328f4f04f5 +Author: Jon Loeliger +Date: Thu Nov 1 12:23:29 2007 -0500 + + 86xx: Fix broken variable reference when #def DEBUGing. + + Sometimes you can't reference the DDR2 controller variables. + + Signed-off-by: Jon Loeliger + +commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58 +Author: Roy Zang +Date: Mon Nov 5 17:39:24 2007 +0800 + + Implement general ULi 526x Ethernet driver support in U-boot + + This patch implements general ULi 526x Ethernet driver. + Until now, it is the only native Ethernet port on + MPC8610HPCD board, but it could be used on other boards + with ULi 526x Ethernet port as well. + + Signed-off-by: Roy Zang + Signed-off-by: Zhang Wei + Acked-by: Jon Loeliger + Signed-off-by: Ben Warren + +commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd +Author: Larry Johnson +Date: Thu Nov 1 08:46:50 2007 -0500 + + NET: Add Ethernet 1000BASE-X support for PPC4xx + + This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and + "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which + returns non-zero iff the PHY registers are configured for 1000BASE-X. The + "mii info" command is modified to distinguish between 1000BASE-T and -X. + + Signed-off-by: Larry Johnson + Signed-off-by: Ben Warren + +commit 298035df4948b113d29ac0e694717d34b95bc5dc +Author: Larry Johnson +Date: Wed Oct 31 11:21:29 2007 -0500 + + NET: Cosmetic changes + + Signed-off-by: Larry Johnson + Signed-off-by: Ben Warren - [BUILD] conditionally compile common/cmd_*.c in common/Makefile +commit 654f38b3a387886996a5a75771fbfc29cb4f225e +Author: Stefan Roese +Date: Mon Nov 5 07:43:05 2007 +0100 - Modify common/Makefile to conditionally compile the cmd_*.c files based - on the board config. + ppc4xx: Make output a little shorter on PCIe detection - Signed-off-by: Grant Likely + Now not max 3 lines but 2 lines are printed per PCIe port. -commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1 -Author: Grant Likely -Date: Mon Sep 24 09:05:31 2007 -0600 + Signed-off-by: Stefan Roese - [BUILD] Generate include/autoconf.mk from board config files +commit 992742a5b09d9040adbd156fb90756af66ade310 +Author: Wolfgang Denk +Date: Sat Nov 3 23:09:27 2007 +0100 - Use cpp and sed to postprocess config.h and import the defined values - into include/autoconf.mk. autoconf.mk is then included by config.mk to - give 'make' access to the board configuration. + Cleanup coding style; update CHANGELOG - Doing this enables conditional compilation at the Makefile level instead - of by wrapping every .c file with #ifdef/#endif wrappers. + Signed-off-by: Wolfgang Denk - Signed-off-by: Grant Likely +commit e881cb563e32f45832b7b6db77bdcd017adcbb41 +Author: Bruce Adler +Date: Fri Nov 2 13:15:42 2007 -0700 -commit 080c646dbf474a109c3f85718fb01ce042a38c45 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Tue Nov 20 20:14:18 2007 +0100 + fix wording in README - drivers/i2c : move i2c drivers to drivers/i2c + Changed the wording to properly describe the shadowing + of the environment from ROM to RAM - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Bruce Adler -commit 9a337ddc154a10a26f117fd147b009abcdeba75a -Author: Wolfgang Denk -Date: Mon Nov 19 22:20:24 2007 +0100 +commit ad845beef06245426c57b53dcdc01b7dc70e0d45 +Author: Shinya Kuribayashi +Date: Wed Oct 31 02:18:15 2007 +0900 - Prepare for 1.3.0 release. + blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk - Signed-off-by: Wolfgang Denk + Signed-off-by: Shinya Kuribayashi -commit f30ad49b16bf998b03c1a5228b6c86369d61c258 -Author: Haiying Wang -Date: Mon Nov 19 10:02:13 2007 -0500 +commit ec22755799466c8a103664bb3a5e647bf9c238f4 +Author: Vlad Lungu +Date: Thu Oct 25 16:08:14 2007 +0300 - Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS + Trimmed some variables in ne2000.c - CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it. + Signed-off-by: Vlad Lungu - Signed-off-by: Haiying Wang +commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 +Author: Zhang Wei +Date: Thu Oct 25 17:51:27 2007 +0800 -commit f8c320609366176b31104d9bf5e295232e1c7f1d -Author: Shinya Kuribayashi -Date: Mon Nov 19 11:14:16 2007 +0900 + Fix the issue of usb_kbd driver missing the scan code of key 'z'. - [MIPS] board/gth2/lowlevel_init.S: Fix a build warning + The scan code of the key 'z' is 0x1d, which should be handled. - lowlevel_init.S: Assembler messages: - lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local. + The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI + controller. - Looking at codes, the `memtest' and `clearmem' are intentional mixed - use of `global symbols' and `label' for debugging purpose. To make it - build, just disable global-symbols-use for now. As a result `memtest' - still remains as unused, but leave it be... + Signed-off-by: Zhang Wei - Signed-off-by: Shinya Kuribayashi +commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 +Author: Zhang Wei +Date: Thu Oct 25 17:30:04 2007 +0800 -commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab -Author: Wolfgang Denk -Date: Mon Nov 19 12:59:14 2007 +0100 + Fix USB support issue for MPC8641HPCN board. - Fix build problems with mp2usb board + The configuration file has already enabled USB, but it + missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB + on MPC8641HPCN can not work because of the wrong USB + register endian. - Signed-off-by: Wolfgang Denk + And add the USB command to U-Boot commands list. -commit 6bf4c686afca1e86e1c384d59218f914605713bf + Signed-off-by: Zhang Wei + +commit 4e62041023dc3de9d98d977bb080235bc6d035e0 Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sun Nov 18 18:36:11 2007 +0100 +Date: Wed Oct 24 18:16:01 2007 +0200 - s3c24x0: Fix usb_ohci.c missing in Makefile - and usb_ohci.c warning differ in signedness + Use config_cmd_default.h instead of config_cmd_all.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD -commit 6073f61e078da5ddb521b56256bcc36508589883 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sun Nov 18 12:55:02 2007 +0100 +commit 56622f87857439b1c221e9deef11a9d5bb5d4308 +Author: Marian Balakowicz +Date: Wed Oct 24 01:37:36 2007 +0200 - pb1x00 board: Fix u16 status declaration when PCMCIA is defined + TQM5200: Call usb_cpu_init() during board init - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + usb_cpu_init() configures GPS USB pins, clocks, etc. and + is required for proper operation of kernel USB subsystem. + This setup was previously done in the kernel by the fixup + code which is being removed, thus low level init must be + done by U-boot now. -commit 8412d814ce8bf5570a2b747f1e7fd321097fe987 -Author: Wolfgang Denk -Date: Sun Nov 18 17:11:09 2007 +0100 + Signed-off-by: Marian Balakowicz - Fix compiler warnings for ARM systems. +commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd +Author: Guennadi Liakhovetski +Date: Tue Oct 23 16:25:50 2007 +0200 - Signed-off-by: Wolfgang Denk + Fix typo in nfs.c -commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37 -Author: Wolfgang Denk -Date: Sun Nov 18 16:36:27 2007 +0100 + An obvious typo. Originally fixed in linkstation u-boot port. - Fix compiler warnings for PPC systems. Update CHANGELOG. + Signed-off-by: Guennadi Liakhovetski - Signed-off-by: Wolfgang Denk +commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 +Author: Guennadi Liakhovetski +Date: Tue Oct 23 14:35:05 2007 +0200 -commit 079c2c4fa71c0d1ebef394508df9088df8a308d3 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Sat Nov 17 11:31:10 2007 +0100 + Fix a typo in cpu/mpc824x/interrupts.c - Fix warning differ in signedness in net/net.c and net/nfs.c + Since December 2003 the timer_interrupt_cpu() function in + cpu/mpc824x/interrupts.c contains what seems to be a superfluous + parameter. Remove it. -commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81 -Author: Shinya Kuribayashi -Date: Sat Nov 17 20:42:45 2007 +0900 + Signed-off-by: Guennadi Liakhovetski - gth2.c: Fix a warning on gth2 build. +commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d +Author: Sergej Stepanov +Date: Wed Oct 17 11:13:51 2007 +0200 - gth2.c: In function 'misc_init_r': - gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness + add ft_cpu_setup(..) on mpc8260 - Signed-off-by: Shinya Kuribayashi + Add ft_cpu_setup(..)-function to adapt it for use with libfdt + based on code from mpc5xxx -commit 2309c130aa4c84b91bd874a41269c923eb61b555 + Sigend-off-by: Sergej Stepanov + -- + +commit 6abd82e19ae93c0b4d104e50165e235915ec0875 +Author: Sergej Stepanov +Date: Wed Oct 17 11:18:42 2007 +0200 + + changes for IDS8247 board support + + To get the IDS8247 board working following are done: + - FCC2 is deactivated + - FCC1 is activated + - I2C is activated + - CFI driver is activated + - Adapted for use with LIBFDT + + Signed-off-by: Sergej Stepanov + -- + +commit 3d6cb3b24add6415f86a0f013ea40f5639b90047 Author: Stefan Roese -Date: Sat Nov 17 07:58:25 2007 +0100 +Date: Sat Nov 3 12:08:28 2007 +0100 - Fix warning differ in signedness in common/cmd_scsi.c + ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support + + This patch adds NAND booting support for the AMCC 405EX(r) eval boards. + Again, only one image supports both targets. Signed-off-by: Stefan Roese -commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c -Author: Shinya Kuribayashi -Date: Sat Nov 17 20:05:26 2007 +0900 +commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c +Author: Haavard Skinnemoen +Date: Wed Oct 24 15:48:37 2007 +0200 - [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker + ATSTK1002: Remove default ethernet addresses - Current trick to pick up GNU assembler minor version does not work with the - latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to - "(GNU Binutils) ". + Wolfgang is right: It's not a good idea to set up default initial + ethernet addresses for a board, even though they belong to the local + range. - $ sde-as --version |grep "GNU assembler" - GNU assembler 2.15.94 mipssde-6.02.02-20050602 - $ sde-as --version |grep "GNU assembler" |awk '{print $3}' - 2.15.94 - $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' - 15 - $ + This will change the failure mode from "IT manager screams at you for + using duplicate ethernet addresses" to a nice error message explaining + that the ethernet address hasn't been set properly. - $ mips-linux-as --version |grep "GNU assembler" - GNU assembler (GNU Binutils) 2.18 - $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' - (GNU - $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' - (no output) - $ + Signed-off-by: Haavard Skinnemoen - As a result of above, you'll see many noises with such binutils: +commit e5c794e491a57d829b6d8733e2ed8368a2269abf +Author: Justin Flammia +Date: Mon Oct 29 17:40:35 2007 -0400 - make -C cpu/mips/ - /bin/sh: line 0: [: : integer expression expected - /bin/sh: line 0: [: : integer expression expected - make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips' - mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S - /bin/sh: line 0: [: : integer expression expected - mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S - /bin/sh: line 0: [: : integer expression expected - mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c - /bin/sh: line 0: [: : integer expression expected + DHCP Client Fix - This patch simplifies the trick and makes it work with both versions of gas. - I also replace an expensive `awk (or gawk)' with `cut'. + This is a multi-part message in MIME format. - Signed-off-by: Shinya Kuribayashi + commit e6e505eae94ed721e123e177489291fc4544b7b8 + Author: Justin Flammia + Date: Mon Oct 29 17:19:03 2007 -0400 -commit 16664f72850846e645616da1c0fa5afcd6d15f15 -Author: Shinya Kuribayashi -Date: Sat Nov 17 20:05:26 2007 +0900 + Found a bug in the way the DHCP Request packet is built, where the IP address + that is offered by the server is bound to prematurely. This patch is a fix of + that bug where the IP address offered by the DHCP server is not used until + after the DHCP ACK from the server is received. - [MIPS] Remove useless instructions for initializing $gp. + Signed-off-by: Justin Flammia + Signed-off-by: Ben Warren - Signed-off-by: Shinya Kuribayashi +commit 5d96d40d3f36da33348e68f9ea993f383e11f997 +Author: Stefan Roese +Date: Wed Oct 31 20:58:34 2007 +0100 -commit 03c031d5660ea946c39af6e2e16267da857c609f -Author: Shinya Kuribayashi -Date: Sat Oct 27 15:27:06 2007 +0900 + ppc4xx: Fix acadia_nand build problem - [MIPS] MIPS 4K core: Coding style cleanups + Since the cache handling functions were moved from start.S into cache.S + the acadia NAND booting Makfile needs to be adapted accordingly. - No logical changes. + Signed-off-by: Stefan Roese - Signed-off-by: Shinya Kuribayashi +commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949 +Author: Stefan Roese +Date: Wed Oct 31 20:57:11 2007 +0100 -commit f5e429d3860bba4c6ae8bead8f78349fa24491b2 -Author: Shinya Kuribayashi -Date: Sat Nov 17 20:05:20 2007 +0900 + ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM + + This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files + and to the Sequoia TLB init code. Now the cache can be enabled on 44x + boards by defining CONFIG_4xx_DCACHE in the board config file. This + option will disappear, when more boards use is successfully and no + more known problems exist. + + This is tested successfully on Sequoia and Katmai. The only problem that + needs to be fixed is, that USB is not working on Sequoia right now, since + it will need some cache handling code too, similar to the 4xx EMAC driver. + + Signed-off-by: Stefan Roese - [MIPS] gth2.c: Fix a warning on gth2 build. +commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738 +Author: Stefan Roese +Date: Wed Oct 31 20:51:10 2007 +0100 - gth2.c: In function 'misc_init_r': - gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness + ppc4xx: Enable CPU POST test for 4xx with dcache enabled - Signed-off-by: Shinya Kuribayashi + Now with caches enabled (i- and d-cache) on 44x, we need a chance to + disable the cache for the CPU POST tests, since these tests consist + of self modifying code. This is done via the new change_tlb() function. -commit 4fbd0741b2b6441da10be93e10267122581b7079 -Author: Shinya Kuribayashi -Date: Sat Oct 27 15:22:33 2007 +0900 + Signed-off-by: Stefan Roese - [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build. +commit f71b2888b4b3c870909a0341427b2a914246f81f +Author: Stefan Roese +Date: Wed Oct 31 20:47:26 2007 +0100 - au1x00_eth.c: In function 'au1x00_miiphy_write': - au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void + ppc4xx: Change 4xx POST ethernet test to handle cached memory too - Signed-off-by: Shinya Kuribayashi + This patch enables the 4xx EMAC POST driver to work too, when dcache is + enabled. -commit f01320459736f156707425cf8112f98606301aa4 -Author: Shinya Kuribayashi -Date: Sat Oct 27 15:00:25 2007 +0900 + Signed-off-by: Stefan Roese - [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error +commit a2685904061b35a17583d65fe47cdc2686a69eaa +Author: Stefan Roese +Date: Wed Oct 31 20:45:53 2007 +0100 - au1x00_eth.c: In function 'au1x00_enet_initialize': - au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function) - au1x00_eth.c:246: error: (Each undeclared identifier is reported only once - au1x00_eth.c:246: error: for each function it appears in.) - au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function) - au1x00_eth.c: In function 'au1x00_miiphy_write': - au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void - make[1]: *** [au1x00_eth.o] Error 1 + ppc4xx: Remove temporary TLB entry in POST cache test only for 440 - Fixed by moving these two functions forward. + Signed-off-by: Stefan Roese - Signed-off-by: Shinya Kuribayashi +commit ff768cb168d8157c24a25016dbfbeb465e47f420 +Author: Stefan Roese +Date: Wed Oct 31 18:01:24 2007 +0100 -commit b09258c5393edd1087c5f39ae68338f16b49f8b3 -Author: Shinya Kuribayashi -Date: Sat Oct 27 15:00:25 2007 +0900 + ppc4xx: Change 4xx ethernet driver to handle cached memory too - MAKEALL: Added missing pb1000 board + This patch enables the 4xx EMAC driver to work too, when dcache is + enabled. - Signed-off-by: Shinya Kuribayashi + Signed-off-by: Stefan Roese -commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369 -Author: Shinya Kuribayashi -Date: Sat Oct 27 15:00:24 2007 +0900 +commit 483e09a223c666269ef81d3573a6591b1046b0ef +Author: Stefan Roese +Date: Wed Oct 31 17:59:22 2007 +0100 - [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S + ppc4xx: Add change_tlb function to modify I attribute of TLB(s) - Signed-off-by: Shinya Kuribayashi + This function is used to either turn cache on or off in a specific + memory area. -commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82 -Author: Shinya Kuribayashi -Date: Sat Oct 27 15:00:24 2007 +0900 + Signed-off-by: Stefan Roese - [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end} +commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79 +Author: Stefan Roese +Date: Wed Oct 31 17:57:52 2007 +0100 - Signed-off-by: Shinya Kuribayashi + ppc4xx: Remove cache definition from 4xx board config files -commit 5947f6999aafa7c54c1390983d264a8463dfea8e -Author: Wolfgang Denk -Date: Sat Nov 17 02:34:38 2007 +0100 + All 4xx board config files don't need the cache definitions anymore. + These are now defined in common headers. - Update CHANGELOIG, prepare for -rc4 + Signed-off-by: Stefan Roese - Signed-off-by: Wolfgang Denk +commit 9b94ac61d2176185c30adf0793e079ec30e68687 +Author: Stefan Roese +Date: Wed Oct 31 17:55:58 2007 +0100 -commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5 -Author: Luotao Fu -Date: Wed Nov 14 18:58:33 2007 +0100 + ppc4xx: Rework 4xx cache support - Fix the i2c frequency and default address in rsdproto board + New cache handling functions added and all existing functions + moved from start.S into seperate cache.S. - rsdproto board support has wrong I2C frequency and wrong return value - handling. + Signed-off-by: Stefan Roese - Signed-off-by: Luotao Fu +commit 06713773da4ac3d390c63d82641eb553224b27c2 +Author: Stefan Roese +Date: Tue Oct 23 18:03:12 2007 +0200 -commit 429c180edad038f91c989cb14b478228092e7054 -Author: Wolfgang Denk -Date: Sat Nov 17 01:45:38 2007 +0100 + ppc4xx: Remove compiler warning from previous commit - powerpc: Backout relocation changes for MPC5121, too. + Signed-off-by: Stefan Roese - Apply Grant Likely's backout to MPC5121 code, too. +commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9 +Author: Stefan Roese +Date: Tue Oct 23 14:40:30 2007 +0200 - Pointed out by Rafal Jaworowski + ppc4xx: Remove temporary TLB entry in POST cache test - Signed-off-by: Wolfgang Denk + Signed-off-by: Stefan Roese -commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8 -Author: Grant Likely -Date: Tue Nov 13 22:18:33 2007 -0700 +commit 1338e6a81834099ba19733b69aafd8ef5f098094 +Author: Stefan Roese +Date: Tue Oct 23 14:05:08 2007 +0200 - powerpc: Backout relocation changes. + ppc4xx: Change autonegotiation timeout from 4 to 5 seconds - Ugh. I *hate* to back this change out, but these compiler flags don't - work for relocation on all versions of GCC. I've not been able to - reproduce the environment in my setup (and hence, not been able to - find a combination that *does* work), so I've got no choice but to go - back to the old gcc flags and linker script. + I lately noticed, that newer 4xx board with GBit support sometimes don't + finish link autonegotiation in 4 seconds. Changing this timeout to 5 + seconds seems fine here. - Signed-off-by: Grant Likely + Signed-off-by: Stefan Roese -commit 5c15010efad980ad5498cc565fc1ed70df2f52b4 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Tue Nov 13 09:11:05 2007 +0100 +commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7 +Author: Stefan Roese +Date: Tue Oct 23 14:03:17 2007 +0200 - Fixed mips_io_port_base build errors. + ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends - This patch has been sent on: - - 29 Sep 2007 + This patch changes all in32/out32 calls to use the recommended in_be32/ + out_be32 macros instead. - Although mips_io_port_base is currently a part of IDE command, it is quite - fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move - it to MIPS general part, and introduce `set_io_port_base()' from Linux. + Signed-off-by: Stefan Roese - This patch is triggered by multiple definition of `mips_io_port_base' build - error on gth2 (and tb0229 also needs this fix.) +commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a +Author: Stefan Roese +Date: Thu Oct 25 12:24:59 2007 +0200 - board/gth2/libgth2.a(gth2.o): In function `log_serial_char': - /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' - common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here - make: *** [u-boot] Error 1 + ppc4xx: Fix POST ethernet test for Haleakala - Signed-off-by: Shinya Kuribayashi - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + The POST ethernet test needed to be changed to dynamically determine + the count of ethernet devices. This code is cloned from the 4xx + ethernet driver. -commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422 -Author: Wolfgang Denk -Date: Sat Nov 17 01:30:40 2007 +0100 + Signed-off-by: Stefan Roese - Fix a bug in the slave serial programming mode for the Xilinx - Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if - the most significant bit was set, which did not work on any - architecture where "char" defaulted to be an unsigned type. +commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a +Author: Stefan Roese +Date: Tue Oct 23 11:31:05 2007 +0200 - Based on a patch by Angelos Manousaridis + ppc4xx: Correct UART input clock calculation and passing to fdt - Signed-off-by: Wolfgang Denk + We now use a value in the gd (global data) structure for the UART input + frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely + in get_sys_info(). -commit d08b7233bc252faad8339e7ca0ddfd62fa79903c -Author: Jon Loeliger -Date: Thu Nov 1 12:23:29 2007 -0500 + Signed-off-by: Stefan Roese - 86xx: Fix broken variable reference when #def DEBUGing. +commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124 +Author: Stefan Roese +Date: Tue Oct 23 10:10:08 2007 +0200 - Sometimes you can't reference the DDR2 controller variables. + ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support - Signed-off-by: Jon Loeliger + The Haleakala is nearly identical with the Kilauea eval board. The only + difference is that the 405EXr only supports one EMAC and one PCIe + interface. This patch adds support for the Haleakala board by using + the identical image for Kilauea and Haleakala. The distinction is done + by comparing the PVR. -commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19 -Author: Jason Jin -Date: Fri Oct 26 18:32:00 2007 +0800 + Signed-off-by: Stefan Roese - make 8610 board use pixis reset +commit 9f798766aa85e62eb8fa8c721e148df609b78137 +Author: Eugene O'Brien +Date: Tue Oct 23 08:29:10 2007 +0200 - Signed-off-by: Jason Jin + ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM -commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836 -Author: Jason Jin -Date: Mon Oct 29 19:26:21 2007 +0800 + This patch also adds a note to the fixed DDR setup for Bamboo NAND booting: - Unify pixis_reset altbank across board families + Note: + As found out by Eugene O'Brien , the fixed + DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM + modules are still plugged in. So it is recommended to remove the DIMM + modules while using the NAND booting code with the fixed SDRAM setup! - Basically, refactor the CFG_PIXIS_VBOOT_MASK values - into the separate board config files. + Signed-off-by: Eugene O'Brien + Signed-off-by: Stefan Roese - Signed-off-by: Jason Jin - Signed-off-by: Jon Loeliger +commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a +Author: Stefan Roese +Date: Mon Oct 22 16:24:44 2007 +0200 -commit 64bf555465c7926be13e1046ac0d0f05ac72829c -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Wed Nov 7 08:19:21 2007 +0100 + ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards - Fix warning: pointer targets in assignment differ in signedness + Signed-off-by: Stefan Roese - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD +commit 3248f63ad89cb031491edb7016587fe6e9a238b9 +Author: Stefan Roese +Date: Mon Oct 22 16:22:40 2007 +0200 -commit 7a60ee7c6248a958c5757d3660a1702723a2786d -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Wed Nov 7 08:19:19 2007 +0100 + ppc4xx: Rework of 4xx serial driver (4) - Fix warning differ in signedness in common/cmd_ide.c + Change 4xx_uart.c: - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + - Use in_8/out_8 macros instead of in8/out8 + - No need for UART_BASE marco anymore, now really handled via function + parameter + - serial_init_common() introduced + - Further coding style cleanup -commit 4d4faae65e115e327425cd514c1a35146a85166b -Author: Grant Likely -Date: Mon Sep 24 09:05:31 2007 -0600 + Signed-off-by: Stefan Roese - Group PCI and PCMCIA drivers in drivers/Makefile +commit e61cb8163a66b8a135696ae232e2bead1ce0a049 +Author: Stefan Roese +Date: Mon Oct 22 15:45:49 2007 +0200 - Signed-off-by: Grant Likely + ppc4xx: Rework of 4xx serial driver (3) -commit 5798f87dc10a496d79d3177b9f5a76488987fd35 -Author: Grant Likely -Date: Mon Sep 24 09:05:31 2007 -0600 + Change all linker scripts to reference the changed driver name iop480_uart.o. - Group block/flash drivers in drivers/Makefile + Signed-off-by: Stefan Roese - Signed-off-by: Grant Likely +commit 882ae41274921f9016131806bdeb27e19606f47a +Author: Stefan Roese +Date: Mon Oct 22 15:44:39 2007 +0200 -commit df58c81551700f058b44cacf55a7997fa63bfe0a -Author: Grant Likely -Date: Mon Sep 24 09:05:31 2007 -0600 + ppc4xx: Rework of 4xx serial driver (2) - Group USB drivers in drivers/Makefile + Change all linker scripts to reference the changed driver name 4xx_uart.o. - Signed-off-by: Grant Likely + Note: In most cased all these explicit referencing of these object files + in the linker scripts is not neccessary. Only for manually embedded + environment into the U-Boot image, which is not done is most cases. -commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29 -Author: Grant Likely -Date: Mon Sep 24 09:05:30 2007 -0600 + Signed-off-by: Stefan Roese - Group i2c drivers in drivers/Makefile +commit ad31e40bed042cb670d0036fea96435007afb838 +Author: Stefan Roese +Date: Mon Oct 22 15:09:59 2007 +0200 - Signed-off-by: Grant Likely + ppc4xx: Rework of 4xx serial driver (1) -commit ec00c76de0e5971273905998d62d6bb119324218 -Author: Grant Likely -Date: Mon Sep 24 09:05:30 2007 -0600 + This patch starts the rework of the PPC4xx serial driver. First we split + the file into two seperate files, one 4xx_uart.c with the 405/440 UART + handling code and the other one iop480_uart.c with the UART code for the + PLX-Tech IOP480 PPC (PPC403 based). - Group console drivers in drivers/Makefile + Signed-off-by: Stefan Roese - Signed-off-by: Grant Likely +commit 764e7417ee5f6e25b1715720e7d7dd3487109385 +Author: Stefan Roese +Date: Mon Oct 22 10:30:38 2007 +0200 -commit 754f230aa01b8c789fc31f8013c2487954073300 -Author: Grant Likely -Date: Mon Sep 24 09:05:30 2007 -0600 + ppc4xx: Correct UART input clock calculation and passing to fdt - Group network drivers in drivers/Makefile + Signed-off-by: Stefan Roese - Signed-off-by: Grant Likely +commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa +Author: Stefan Roese +Date: Mon Oct 22 07:34:34 2007 +0200 -commit f0037c56b0d12cd46215124667b9f83d60ef9391 -Author: Grant Likely -Date: Mon Sep 24 09:05:30 2007 -0600 + ppc4xx: Add initial AMCC Makalu 405EX support - Build: split COBJS value into multiple lines + Signed-off-by: Stefan Roese - This change is in preparation for condtitionial compile support in the - build system. By spliting them all into seperate lines now, subsequent - patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_) += ' will - be less invasive and easier to review +commit fa8aea20456e6f1dba43f46bcc72024dd9499998 +Author: Stefan Roese +Date: Mon Oct 22 07:33:52 2007 +0200 - Signed-off-by: Grant Likely + ppc4xx: Add freqUART to CPU speed detection -commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4 -Author: Grant Likely -Date: Mon Sep 24 09:05:30 2007 -0600 + This value is needed later for the device tree configuration of + the uart clock. - Add .gitignore files + Signed-off-by: Stefan Roese - Signed-off-by: Grant Likely - Acked-by: Kim Phillips +commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d +Author: Stefan Roese +Date: Sun Oct 21 14:26:29 2007 +0200 -commit 955413f35f054a82e40042f1dbcf501c6a05719b -Author: Grant Likely -Date: Thu Nov 15 08:27:52 2007 -0700 + ppc: Small Kilauea cleanup of config file - Revert "Correct relocation fixup for mpc5xx" + Signed-off-by: Stefan Roese - This reverts commit 3649cd99ba815b6601868735765602f00ef3692b. - Signed-off-by: Grant Likely +commit 758c037aeead34b49631b8da3a90b1bba14c0410 +Author: Stefan Roese +Date: Sun Oct 21 08:16:12 2007 +0200 -commit e15633888a058aacb31a62d2cf1278e1e4c236ab -Author: Grant Likely -Date: Thu Nov 15 08:24:32 2007 -0700 + rtc: Add Xicor/Intersil X1205 RTC support - Revert "Correct fixup relocation for MPC5xxx" + This patch adds support for the Xicor/Intersil X1205 RTC used on the + AMCC Makalu eval board. This driver is basically cloned from the Linux + driver version (2.6.23). - This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90. - Signed-off-by: Grant Likely + This patch also introduces the Linux bcd.h header for the BCD2BIN/ + BIN2BCD conversions. In the future some of the other U-Boot RTC driver + should be converted to also use this header instead of implementing + their own local copy of these functions/macros. -commit 139365fbe566d0fc619a1ed04452ec5388f0cef8 -Author: Grant Likely -Date: Thu Nov 15 08:21:04 2007 -0700 + Signed-off-by: Stefan Roese - Revert "Correct fixup relocation for mpc8220" +commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6 +Author: Stefan Roese +Date: Sun Oct 21 08:12:41 2007 +0200 - This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00. - Signed-off-by: Grant Likely + ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx -commit 70922342369e5e39b286fe21e768a239ca07a514 -Author: Grant Likely -Date: Thu Nov 15 08:20:57 2007 -0700 + This patch moves some common 4xx macros and the PPC405_SYS_INFO/ + PPC440_SYS_INFO structure into the common ppc4xx.h header. - Revert "Correct fixup relocation for mpc824x" + Lot's of other macros are good candidates to be consolidated this way + in the future. - This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa. - Signed-off-by: Grant Likely + Signed-off-by: Stefan Roese -commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a -Author: Grant Likely -Date: Thu Nov 15 08:20:50 2007 -0700 +commit 770c7af5800f598d22730d1f4b70f16c9b33512e +Author: Stefan Roese +Date: Sun Oct 21 08:05:18 2007 +0200 - Revert "Correct fixup relocation for mpc8260" + ppc4xx: Fix size setup in Kilauea DDR2 init routine - This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. - Signed-off-by: Grant Likely + The size was initilized wrong. Instead of 256MB, the DDR2 controller + was setup to 512MB. Now the correct values is used. -commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6 -Author: Grant Likely -Date: Thu Nov 15 08:20:43 2007 -0700 + This patch also does a little cleanup and adds a comment here. - Revert "Correct fixup relocation for mpc83xx" + Signed-off-by: Stefan Roese - This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27. - Signed-off-by: Grant Likely +commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a +Author: Eugene O'Brien +Date: Thu Oct 18 17:29:04 2007 +0200 -commit c93945e8f9e300860d2bf73a2549ce5794f8bd00 -Author: Grant Likely -Date: Thu Nov 15 08:20:25 2007 -0700 + ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors - Revert "[MPC512x] Correct fixup relocation" + CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR + number is used to access system registers. - This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4. - Signed-off-by: Grant Likely + Signed-off-by: Eugene O'Brien + Signed-off-by: Stefan Roese -commit 54fd6c93c28a0a45352fff5dd92673401ff563f2 +commit c36c68160333ac5fe41ec3db12a728b7075b3912 Author: Stefan Roese -Date: Tue Nov 13 08:18:20 2007 +0100 +Date: Thu Oct 18 07:42:27 2007 +0200 - ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching + ppc4xx: Change inbound PCIe location for endpoint tests on Katmai - Signed-off-by: Stefan Roese + On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which + is the internal SRAM. Since I now ported and tested this endpoint mode + on Kilauea successfully to map to 0 (SDRAM), I also changed this for + Katmai. -commit 1ce55151c85d068f70317a8d65c61058b891afb4 -Author: Heiko Schocher -Date: Tue Nov 13 07:50:29 2007 +0100 + Yucca will stay at internal SRAM for now. Not sure if somebody relies on + this setup. - [UC101] SRAM now with 2 MB working. + Signed-off-by: Stefan Roese - Signed-off-by: Heiko Schocher +commit 5cb4af4791f61843432155142b6cfac901f66c10 +Author: Stefan Roese +Date: Thu Oct 18 07:39:38 2007 +0200 -commit 8d737a28152ec12873f8544cca1fb39a49e5e693 -Author: TsiChungLiew -Date: Thu Nov 8 12:50:18 2007 -0600 + ppc4xx: Add PCIe endpoint support on Kilauea (405EX) - ColdFire: MCF5329 - Remove reset registers from CCM + This patch adds endpoint support for the AMCC Kilauea eval board. It can + be tested by connecting a reworked PCIe cable (only 1x lane singles + connected) to another root-complex. - Signed-off-by: TsiChungLiew + In this test setup, a 64MB inbound window is configured at BAR0 which maps + to 0 on the PLB side. So accessing this BAR0 from the root-complex will + access the first 64MB of the SDRAM on the PPC side. -commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7 -Author: TsiChungLiew -Date: Thu Nov 8 12:31:11 2007 -0600 + Signed-off-by: Stefan Roese - ColdFire: MCF5329 - Add Reset structure to immap_5329.h +commit d4cb2d17946466740afeb195a57d6cb290bf4cc0 +Author: Stefan Roese +Date: Sat Oct 13 16:43:23 2007 +0200 - Signed-off-by: TsiChungLiew + ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode -commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21 -Author: TsiChungLiew -Date: Thu Nov 8 12:19:01 2007 -0600 + This patch adds support for dynamic configuration of PCIe ports for the + AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe + boards Yucca & Katmai and the 405EX board Kilauea. - ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode + This dynamic configuration is done via the "pcie_mode" environement + variable. This variable can be set to "EP" or "RP" for endpoint or + rootpoint mode. Multiple values can be joined via the ":" delimiter. + Here an example: - Signed-off-by: TsiChungLiew + pcie_mode=RP:EP:EP -commit 225a24b5e062ad94627424508ae814f51dbe1a34 -Author: TsiChungLiew -Date: Wed Nov 7 18:00:54 2007 -0600 + This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2 + as endpoint. - ColdFire: MCF5445x - Update correct RAMBAR and missing linker files + Per default Yucca will be configured as: + pcie_mode=RP:EP:EP - Signed-off-by: TsiChungLiew + Per default Katmai will be configured as: + pcie_mode=RP:RP:REP -commit 248c7c14835f34d5d910b45e5600050e58ca6cab -Author: TsiChungLiew -Date: Wed Nov 7 17:56:15 2007 -0600 + Per default Kilauea will be configured as: + pcie_mode=RP:RP - ColdFire: MCF532x - Update do_reset() using core reset + Signed-off-by: Tirumala R Marri + Signed-off-by: Stefan Roese - Signed-off-by: TsiChungLiew +commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f +Author: Stefan Roese +Date: Thu Oct 11 11:15:59 2007 +0200 -commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4 -Author: TsiChungLiew -Date: Wed Nov 7 17:51:00 2007 -0600 + ppc4xx: Enable device tree support (fdt) on Kilauea per default - ColdFire: Update cpu flag for 4.2-xx compiler + This patch enables the fdt support on the AMCC Kilauea eval board. + Additionally now EBC ranges fdt fixup is included to support NOR + FLASH mapping via the Linux physmap_of driver. - Signed-off-by: TsiChungLiew + This Kilauea port now support booting arch/ppc and arch/powerpc + Linux kernels. The default environment "net_nfs" is for arch/ppc + and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc + support will be removed. -commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58 -Author: Roy Zang -Date: Mon Nov 5 17:39:24 2007 +0800 + Signed-off-by: Stefan Roese - Implement general ULi 526x Ethernet driver support in U-boot +commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e +Author: Stefan Roese +Date: Thu Oct 11 11:11:45 2007 +0200 - This patch implements general ULi 526x Ethernet driver. - Until now, it is the only native Ethernet port on - MPC8610HPCD board, but it could be used on other boards - with ULi 526x Ethernet port as well. + ppc4xx: Add additional debug info to 4xx fdt support - Signed-off-by: Roy Zang - Signed-off-by: Zhang Wei - Acked-by: Jon Loeliger - Signed-off-by: Ben Warren + Signed-off-by: Stefan Roese -commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd -Author: Larry Johnson -Date: Thu Nov 1 08:46:50 2007 -0500 +commit db3232ddb058d0ed0bc31f7c5c296748a1afac67 +Author: Stefan Roese +Date: Fri Oct 5 21:28:58 2007 +0200 - NET: Add Ethernet 1000BASE-X support for PPC4xx + ppc4xx: Fix small merge problems with CPCI440 and Acadia boards - This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and - "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which - returns non-zero iff the PHY registers are configured for 1000BASE-X. The - "mii info" command is modified to distinguish between 1000BASE-T and -X. + Signed-off-by: Stefan Roese - Signed-off-by: Larry Johnson - Signed-off-by: Ben Warren +commit 1941cce71b1ae975602854045061e82f94ecd012 +Author: Stefan Roese +Date: Fri Oct 5 17:35:10 2007 +0200 -commit 298035df4948b113d29ac0e694717d34b95bc5dc -Author: Larry Johnson -Date: Wed Oct 31 11:21:29 2007 -0500 + ppc4xx: Fix small merge problem in 4xx_enet.c - NET: Cosmetic changes + Signed-off-by: Stefan Roese - Signed-off-by: Larry Johnson - Signed-off-by: Ben Warren +commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf +Author: Stefan Roese +Date: Fri Oct 5 17:11:30 2007 +0200 -commit 992742a5b09d9040adbd156fb90756af66ade310 -Author: Wolfgang Denk -Date: Sat Nov 3 23:09:27 2007 +0100 + ppc4xx: Add initial AMCC Kilauea 405EX support - Cleanup coding style; update CHANGELOG + Signed-off-by: Stefan Roese - Signed-off-by: Wolfgang Denk +commit dbbd125721aea6645fdb962f36bd41f59e272f9d +Author: Stefan Roese +Date: Fri Oct 5 17:10:59 2007 +0200 -commit e881cb563e32f45832b7b6db77bdcd017adcbb41 -Author: Bruce Adler -Date: Fri Nov 2 13:15:42 2007 -0700 + ppc4xx: Add PPC405EX support - fix wording in README + Signed-off-by: Stefan Roese - Changed the wording to properly describe the shadowing - of the environment from ROM to RAM +commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31 +Author: Stefan Roese +Date: Fri Oct 5 17:09:36 2007 +0200 - Signed-off-by: Bruce Adler + ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming) -commit ad845beef06245426c57b53dcdc01b7dc70e0d45 -Author: Shinya Kuribayashi -Date: Wed Oct 31 02:18:15 2007 +0900 + Signed-off-by: Stefan Roese - blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk +commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db +Author: Stefan Roese +Date: Fri Oct 5 17:07:50 2007 +0200 - Signed-off-by: Shinya Kuribayashi + ppc4xx: Add initial fdt support to 4xx (first needed on 405EX) -commit ec22755799466c8a103664bb3a5e647bf9c238f4 -Author: Vlad Lungu -Date: Thu Oct 25 16:08:14 2007 +0300 + Signed-off-by: Stefan Roese - Trimmed some variables in ne2000.c +commit a424a8bb2924b90724b944165d3141f1fa8dfe5b +Author: Stefan Roese +Date: Fri Oct 5 17:04:57 2007 +0200 - Signed-off-by: Vlad Lungu + POST: Add 405EX support to 4xx UART POST test -commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 -Author: Zhang Wei -Date: Thu Oct 25 17:51:27 2007 +0800 + Signed-off-by: Stefan Roese - Fix the issue of usb_kbd driver missing the scan code of key 'z'. +commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12 +Author: Stefan Roese +Date: Fri Oct 5 15:10:02 2007 +0200 - The scan code of the key 'z' is 0x1d, which should be handled. + DTT: Prepare DS1775 driver for use of different I2C addresses - The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI - controller. + Signed-off-by: Stefan Roese - Signed-off-by: Zhang Wei +commit 19e93b1e16d267220440d827b920fbad8abfa70f +Author: Stefan Roese +Date: Fri Oct 5 14:23:43 2007 +0200 -commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 -Author: Zhang Wei -Date: Thu Oct 25 17:30:04 2007 +0800 + ppc4xx: 4xx_pcie: Change PCIe status output to match common style - Fix USB support issue for MPC8641HPCN board. + Signed-off-by: Stefan Roese - The configuration file has already enabled USB, but it - missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB - on MPC8641HPCN can not work because of the wrong USB - register endian. +commit ff68f66bcb0da847845aa2fac11eba6c25938c99 +Author: Stefan Roese +Date: Fri Oct 5 09:22:33 2007 +0200 - And add the USB command to U-Boot commands list. + ppc4xx: 4xx_pcie: Disable debug output as default - Signed-off-by: Zhang Wei + Signed-off-by: Stefan Roese -commit 4e62041023dc3de9d98d977bb080235bc6d035e0 -Author: Jean-Christophe PLAGNIOL-VILLARD -Date: Wed Oct 24 18:16:01 2007 +0200 +commit 97923770cb52b64d69eec958a11b2eda8d46e0f7 +Author: Stefan Roese +Date: Fri Oct 5 09:18:23 2007 +0200 - Use config_cmd_default.h instead of config_cmd_all.h + ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added - Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Stefan Roese -commit 56622f87857439b1c221e9deef11a9d5bb5d4308 -Author: Marian Balakowicz -Date: Wed Oct 24 01:37:36 2007 +0200 +commit 4dbee8a90df613eb517aadbecebd70f168913d30 +Author: Stefan Roese +Date: Fri Oct 5 07:57:20 2007 +0200 - TQM5200: Call usb_cpu_init() during board init + ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai - usb_cpu_init() configures GPS USB pins, clocks, etc. and - is required for proper operation of kernel USB subsystem. - This setup was previously done in the kernel by the fixup - code which is being removed, thus low level init must be - done by U-boot now. + 128MB seems to be the smallest possible value for the memory size + for on PCIe port. With this change now the BAR's of the PCIe cards + are accessible under U-Boot. - Signed-off-by: Marian Balakowicz + One big note: This only works for PCIe port 0 & 1. For port 2 this + currently doesn't work, since the base address is now 0xc0000000 + (0xb0000000 + 2 * 0x08000000), and this is already occupied by + CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean + to change the base addresses completely and this change would have + too much impact right now. -commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd -Author: Guennadi Liakhovetski -Date: Tue Oct 23 16:25:50 2007 +0200 + This patch adds debug output to the 4xx pcie driver too. - Fix typo in nfs.c + Signed-off-by: Stefan Roese - An obvious typo. Originally fixed in linkstation u-boot port. +commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2 +Author: Stefan Roese +Date: Wed Oct 3 21:16:32 2007 +0200 - Signed-off-by: Guennadi Liakhovetski + ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx -commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 -Author: Guennadi Liakhovetski -Date: Tue Oct 23 14:35:05 2007 +0200 + Signed-off-by: Stefan Roese - Fix a typo in cpu/mpc824x/interrupts.c +commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a +Author: Stefan Roese +Date: Wed Oct 3 15:01:02 2007 +0200 - Since December 2003 the timer_interrupt_cpu() function in - cpu/mpc824x/interrupts.c contains what seems to be a superfluous - parameter. Remove it. + ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms - Signed-off-by: Guennadi Liakhovetski + These files were introduced with the IBM 405GP but are currently used on all + 4xx PPC platforms. So the name doesn't match the content anymore. This patch + renames the files to 4xx_pci.c/h. -commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d -Author: Sergej Stepanov -Date: Wed Oct 17 11:13:51 2007 +0200 + Signed-off-by: Stefan Roese - add ft_cpu_setup(..) on mpc8260 +commit 94276eb0a7a35b9e8c053d589ae225b0f017a237 +Author: Stefan Roese +Date: Wed Oct 3 14:14:58 2007 +0200 - Add ft_cpu_setup(..)-function to adapt it for use with libfdt - based on code from mpc5xxx + ppc4xx: Add a comment for 405EX PCIe endpoint configuration - Sigend-off-by: Sergej Stepanov - -- + Signed-off-by: Stefan Roese -commit 6abd82e19ae93c0b4d104e50165e235915ec0875 -Author: Sergej Stepanov -Date: Wed Oct 17 11:18:42 2007 +0200 +commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626 +Author: Stefan Roese +Date: Wed Oct 3 10:38:09 2007 +0200 - changes for IDS8247 board support + ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3) - To get the IDS8247 board working following are done: - - FCC2 is deactivated - - FCC1 is activated - - I2C is activated - - CFI driver is activated - - Adapted for use with LIBFDT + (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access + the SDR registers of the PCIe ports. This makes the overall design + clearer, since it removed a lot of switch statements which are not + needed anymore. - Signed-off-by: Sergej Stepanov - -- + Also, the functions ppc4xx_init_pcie_rootport() and + ppc4xx_init_pcie_entport() are merged into a single function + ppc4xx_init_pcie_port(), since most of the code was duplicated. + This makes maintainance and porting to other 4xx platforms + easier. -commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c -Author: Haavard Skinnemoen -Date: Wed Oct 24 15:48:37 2007 +0200 + Signed-off-by: Stefan Roese - ATSTK1002: Remove default ethernet addresses +commit 026f71106871f31d17d0ea0db9a7547ff92934bc +Author: Stefan Roese +Date: Wed Oct 3 07:48:09 2007 +0200 - Wolfgang is right: It's not a good idea to set up default initial - ethernet addresses for a board, even though they belong to the local - range. + ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2) - This will change the failure mode from "IT manager screams at you for - using duplicate ethernet addresses" to a nice error message explaining - that the ethernet address hasn't been set properly. + This patch is the first patch of a series to make the 440SPe PCIe code + usable on different 4xx PPC platforms. In preperation for the new 405EX + which is also equipped with PCIe interfaces. - Signed-off-by: Haavard Skinnemoen + (2) This patch renames the functions from 440spe_ to 4xx_ with a + little additional cleanup -commit e5c794e491a57d829b6d8733e2ed8368a2269abf -Author: Justin Flammia -Date: Mon Oct 29 17:40:35 2007 -0400 + Signed-off-by: Stefan Roese - DHCP Client Fix +commit c7c6da23028f146d912514b95aefa3da7cf37699 +Author: Stefan Roese +Date: Wed Oct 3 07:34:10 2007 +0200 - This is a multi-part message in MIME format. + ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1) - commit e6e505eae94ed721e123e177489291fc4544b7b8 - Author: Justin Flammia - Date: Mon Oct 29 17:19:03 2007 -0400 + This patch is the first patch of a series to make the 440SPe PCIe code + usable on different 4xx PPC platforms. In preperation for the new 405EX + which is also equipped with PCIe interfaces. - Found a bug in the way the DHCP Request packet is built, where the IP address - that is offered by the server is bound to prematurely. This patch is a fix of - that bug where the IP address offered by the DHCP server is not used until - after the DHCP ACK from the server is received. + (1) This patch renames the files from 440spe_pcie to 4xx_pcie - Signed-off-by: Justin Flammia - Signed-off-by: Ben Warren + Signed-off-by: Stefan Roese commit 31548249decf18a6b877a18436b6139dd483fe4a Author: Justin Flammia @@ -2232,6 +4748,39 @@ Date: Wed Oct 17 15:40:19 2007 +0200 Signed-off-by: Stefan Roese +commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c +Author: Jon Loeliger +Date: Tue Oct 16 15:27:43 2007 -0500 + + Initial mpc8610hpcd Makefile files. + + Signed-off-by: Ed Swarthout + Signed-off-by: Mahesh Jade + Signed-off-by: Jason Jin + Signed-off-by: Jon Loeliger + +commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7 +Author: Jon Loeliger +Date: Tue Oct 16 15:26:51 2007 -0500 + + Initial mpc8610hpcd cpu/, README and include/ files. + + Signed-off-by: Ed Swarthout + Signed-off-by: Mahesh Jade + Signed-off-by: Jason Jin + Signed-off-by: Jon Loeliger + +commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e +Author: Jon Loeliger +Date: Tue Oct 16 13:54:01 2007 -0500 + + Initial mpc8610hpcd board files. + + Signed-off-by: Ed Swarthout + Signed-off-by: Mahesh Jade + Signed-off-by: Jason Jin + Signed-off-by: Jon Loeliger + commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd Author: runet@innovsys.com Date: Tue Oct 16 14:50:40 2007 -0500 -- cgit v1.2.3