From 455ae7e87f67c44e6aea68865c83acadd3fcd36c Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 16 Dec 2008 01:02:17 +0100 Subject: Coding style cleanup, update CHANGELOG. Signed-off-by: Wolfgang Denk --- CHANGELOG | 2668 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2668 insertions(+) (limited to 'CHANGELOG') diff --git a/CHANGELOG b/CHANGELOG index 592697887..0c9c0479c 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,2671 @@ +commit 84bc72d90c505fec3ef4b693995407a0bd4064e5 +Author: Mike Frysinger +Date: Thu Dec 11 18:39:08 2008 -0500 + + spi/stmicro: fix debug() display of cmd + + The stmicro_wait_ready() func tries to show the actual opcode that was sent + to the device, but instead it displays the array pointer. Fix it to pull + out the opcode from the start of the array. + + Signed-off-by: Mike Frysinger + +commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9 +Author: Mike Frysinger +Date: Thu Dec 11 06:23:37 2008 -0500 + + env_sf: support embedded environments + + If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect + size is larger than the env size, then it means the env is embedded in a + block. So we have to save/restore the part of the sector which is not the + environment. Previously, saving the environment in SPI flash in this + setup would probably brick the board as the rest of the sector tends to + contain actual U-Boot data/code. + + Signed-off-by: Mike Frysinger + Acked-by: Haavard Skinnemoen + +commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d +Author: Timur Tabi +Date: Wed Dec 3 11:28:30 2008 -0600 + + i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions + + All implementations of the functions i2c_reg_read() and + i2c_reg_write() are identical. We can save space and simplify the + code by converting these functions into inlines and putting them in + i2c.h. + + Signed-off-by: Timur Tabi + Acked-By: Jean-Christophe PLAGNIOL-VILLARD + +commit e39cd81c44740d7355d277ed3d38536cbe1e003d +Author: Dave Liu +Date: Fri Dec 5 15:36:14 2008 +0800 + + lib_ppc: rework the flush_cache + + - It is possible to miss flush/invalidate the last + cache line, we fix it at here. + - add the volatile and memory clobber. + + They are pointed by Scott Wood. + + Signed-off-by: Dave Liu + +commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b +Author: Kumar Gala +Date: Sat Dec 13 17:20:28 2008 -0600 + + Introduce addr_map library + + Add a library that helps in translating between virtual and physical + addresses. This library can be useful as a simple means to implement + map_physmem() and virt_to_phys() for platforms that need functionality + beyond the simple 1:1 mapping. + + Signed-off-by: Kumar Gala + +commit 65e43a10631537dcb92c302d36301a12308216c3 +Author: Kumar Gala +Date: Sat Dec 13 17:20:27 2008 -0600 + + Introduce virt_to_phys() + + virt_to_phys() returns the physical address given a virtual. In most + cases this will be just the input value as the vast majority of + systems run in a 1:1 mode. + + However in systems that are not running this way it should report the + physical address or ~0 if no mapping exists for the given virtual + address. + + Signed-off-by: Kumar Gala + +commit 45845301af3de8675c1f7bbc815c6de35452605a +Author: Yuri Tikhonov +Date: Sun Dec 7 22:12:50 2008 +0100 + + POST Make: fix the sub-dir dependencies missing. + + Signed-off-by: Yuri Tikhonov + +commit 22525779cb51f1bbe4e96fea7b778de1935a5a69 +Author: Martin Michlmayr +Date: Wed Aug 6 14:44:05 2008 +0300 + + Fix a typo in fw_env.config + + Reported-by: Martin Michlmayr + Signed-off-by: Wolfgang Denk + +commit ba490b7761c62b549c222a9723e532dc801a3899 +Author: Peter Tyser +Date: Mon Dec 1 16:22:45 2008 -0600 + + Remove unused CONFIG_ADDR_STREAMING defines + + Signed-off-by: Peter Tyser + +commit d16da93430520d3e46c1ab52eedacf36ab7a2311 +Author: Peter Tyser +Date: Mon Nov 24 11:54:47 2008 -0600 + + cmd_mem: Remove unused variable + + Signed-off-by: Peter Tyser + +commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Dec 14 10:29:39 2008 +0100 + + Fix new found CFG_ + + Also fix some minor typos. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk + +commit 0e0c862efe7279e9609db74d758cd1b84c6c7209 +Author: Sergei Poselenov +Date: Fri Sep 19 12:07:34 2008 +0200 + + Remove compiler warning: target CPU does not support interworking + + This warning is issued by modern ARM-EABI GCC on non-thumb targets. + + Signed-off-by: Vladimir Panfilov + Signed-off-by: Sergei Poselenov + +commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Nov 24 13:33:51 2008 +0100 + + Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent + + FDT support is used for both FIT style images and for architectures + that can pass a fdt blob to an OS (ppc, m68k, sparc). + + For other architectures and boards which do not pass a fdt blob to an + OS but want to use the new uImage format, we just need FIT support. + + Now we can have the 4 following configurations : + + 1) FIT only CONFIG_FIT + 2) fdt blob only CONFIG_OF_LIBFDT + 3) both CONFIG_OF_LIBFDT & CONFIG_FIT + 4) none none + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172 +Author: Matthias Fuchs +Date: Wed Dec 10 15:13:32 2008 +0100 + + ppc4xx: Disable EEPROM write access on PMC440 boards + + This patch disables EEPROM wrtie access by default on PMC440 board. + + Signed-off-by: Matthias Fuchs + +commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df +Author: Matthias Fuchs +Date: Wed Dec 10 15:12:56 2008 +0100 + + ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards + + Signed-off-by: Matthias Fuchs + +commit 71fa0714fe5134bc8718c38d5261d267e88582ba +Author: Stefan Roese +Date: Tue Nov 18 16:36:12 2008 +0100 + + MIPS: Flush data cache upon relocation + + This patch now adds a flush to the data cache upon relocation. The + current implementation is missing this. Only a comment states that it + should be done. So let's really do it now. + + Signed-off-by: Stefan Roese + Signed-off-by: Shinya Kuribayashi + +commit 44174343688dba32571a34550dba08971c65fef1 +Author: Stefan Roese +Date: Tue Nov 18 16:36:22 2008 +0100 + + MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT + + This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This + enables support for boards where the lowlevel initialization is + already done when U-Boot runs (e.g. via OnChip ROM). + + This will be used in the upcoming VCTH board support. + + Signed-off-by: Stefan Roese + Signed-off-by: Shinya Kuribayashi + +commit db08ecaa6eb8176904b3bae103a85ee8f735dc40 +Author: Stefan Roese +Date: Wed Nov 12 13:18:02 2008 +0100 + + MIPS: Add board_early_init_f() to init_sequence + + This patch adds the board_early_init_f() call to the MIPS init + sequence. A weak dummy implementation is also added which can be + overridden by a board specific version. + + This will be used by the upcoming VCTH board support. + + Signed-off-by: Stefan Roese + Signed-off-by: Shinya Kuribayashi + +commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b +Author: Stefan Roese +Date: Wed Nov 12 13:18:19 2008 +0100 + + MIPS: Add onenand_init() to board.c and move nand_init() + + This patch adds a call to onenand_init() for OneNAND support and moves + the nand_init() call to an earlier place, so that the environment can + be used from NAND and OneNAND. + + Signed-off-by: Stefan Roese + Signed-off-by: Shinya Kuribayashi + +commit d8bbc51c7ba9b737a20984333d19fe28a3526431 +Author: Nobuhiro Iwamatsu +Date: Tue Dec 9 11:32:46 2008 +0900 + + sh: Update sh2/sh2a timer + + Renesas SH2/SH2A timer broken. + This patch fix timer function. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit a319f1496210117b73198e3d889ffffaf6825d00 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Dec 5 07:27:37 2008 +0100 + + sh: r2dplus fix register access + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 2 07:40:03 2008 +0100 + + sh: r2dplus/lowlevel_init: coding style fix + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5 +Author: Nobuhiro Iwamatsu +Date: Tue Nov 25 11:05:19 2008 +0900 + + sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT + + SH4 is different a value of CACHE_OC_NUM_ENTRIES and + CACHE_OC_WAY_SHIFT every CPU. + This patch corrects these values. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit e9d5f35497885b3c65d494d09a525d443dcccd3b +Author: Nobuhiro Iwamatsu +Date: Thu Nov 20 16:44:42 2008 +0900 + + sh: Update sh timer function + + Change to write/readX function and fix timer problem. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit b81786cff476c41e332eaeb679158f6527cd67d4 +Author: Nobuhiro Iwamatsu +Date: Tue Nov 4 11:58:58 2008 +0900 + + sh: Migo-R: Update BSC value + + A value of BSC CS4 was wrong, Fixed it. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 5783758fd260a02f44566ad8f29f899565cd0403 +Author: Nobuhiro Iwamatsu +Date: Mon Nov 17 16:52:09 2008 +0900 + + sh: Update ms7722se board config + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51 +Author: Nobuhiro Iwamatsu +Date: Mon Nov 17 16:53:09 2008 +0900 + + sh: Update SuperH serial driver + + The address of SCFSR register is wrong at SH7720/SH7721. + This patch fix this. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 9a1d3557dcd47365c12eeab584b822e57d994352 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 11 22:20:15 2008 +0100 + + sh: fix rsk7203 and MigoR out of tree build + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Nobuhiro Iwamatsu + +commit 1951f847f0a851853871b613ad7cf21a5242226c +Author: Matthias Fuchs +Date: Wed Dec 10 14:41:25 2008 +0100 + + ppc4xx: Update TEXT_BASE for CPCI405 boards + + This patch fixes building U-Boot for CPCI405 boards. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452 +Author: Stefan Roese +Date: Tue Dec 9 20:08:01 2008 +0100 + + ppc4xx: Remove some features from ALPR to fit into 256k again + + Signed-off-by: Stefan Roese + +commit 3b089e4f889a2902449d55e081c886ae607cae89 +Author: Stefan Roese +Date: Wed Dec 10 10:32:59 2008 +0100 + + UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization + + With this patch we set the type back to NONE upon failing UBI partition + initialization. Otherwise further calls to the UBI subsystem would try + to really access the non-existing UBI partition. + + Thanks to Michael Lawnick for pointing this out. + + Signed-off-by: Stefan Roese + +commit 817329351639a8895cd9b87b33aeff043f3d5a44 +Author: Stefan Roese +Date: Wed Dec 10 10:28:33 2008 +0100 + + UBI: Return -ENOMEM upon failing malloc + + Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon + failing malloc(). + + Signed-off-by: Stefan Roese + +commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae +Author: Ben Warren +Date: Tue Dec 9 23:34:15 2008 -0800 + + Fix compile error in building MBX860T. + + Signed-off-by: Ben Warren + +commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee +Author: Michal Simek +Date: Tue Nov 25 11:42:20 2008 +0100 + + microblaze: Remove XUPV2P board + + --- + + Microblaze platforms use generic settings and to have + many platforms is confusing that's why I decided to remove this + platform from U-BOOT. ml401 tree is sufficient for covering + all Microblaze platforms. + + This change will go through microblaze custodian tree. + +commit 99ba6f353582720defff6e6e6761dc455a207d31 +Author: Michal Simek +Date: Mon Nov 24 18:25:41 2008 +0100 + + microblaze: Remove CONFIG_LIBFDT due to error in common files + +commit e7d591e823a991513833af7030468409e25a3b13 +Author: Michal Simek +Date: Mon Nov 24 11:43:00 2008 +0100 + + microblaze: Fix ml401 uart16550 setting + + Signed-off-by: Michal Simek + +commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39 +Author: Michal Simek +Date: Mon Nov 24 11:38:22 2008 +0100 + + microblaze: Set up relocation is done + +commit bcb6dd9187d4b23c748704767bd12d20c829e996 +Author: Mike Frysinger +Date: Tue Dec 9 23:20:31 2008 -0500 + + tools/netconsole: new script for working with netconsole over UDP + + While the doc/README.NetConsole does have a snippet for people to + create their own netcat script, it's a lot easier to make a simple + dedicated script and tell people to use it. + + Also spruce it up a bit to make it user friendly. + + Signed-off-by: Mike Frysinger + +commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0 +Author: Sonic Zhang +Date: Tue Dec 9 23:20:18 2008 -0500 + + fs/fat: handle FAT on SATA + + The FAT file system driver should also handle FAT on SATA devices. + + Signed-off-by: Sonic Zhang + Signed-off-by: Mike Frysinger + +commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97 +Author: Jerry Van Baren +Date: Mon Nov 24 08:15:02 2008 -0500 + + libfdt: Fix redefined uintptr_t warning for USE_HOSTCC + + Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the + following warnings from FDT: + + include/libfdt_env.h:50: warning: redefinition of 'uintptr_t' + /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here + + Fix: Protect the definition of uintptr_t when compiling on the host + system. + + Signed-off-by: Gerald Van Baren + +commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b +Author: Graeme Russ +Date: Sat Nov 22 08:43:29 2008 +1100 + + Moved sc520 PCI definitions to stand-alone file + + Signed Off By: Graeme Russ + +commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa +Author: Graeme Russ +Date: Sat Nov 22 08:43:21 2008 +1100 + + Fixed path to sc520 SSI include file + + Signed Off By: Graeme Russ + +commit d4f70da544c33db3e4fce6473dea4ecca4322545 +Author: Graeme Russ +Date: Fri Nov 21 06:28:05 2008 +1100 + + Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c + + Signed-off-by: Graeme Russ + +commit c034075a713b60e654c64e88e87da29440f31bb4 +Author: Stefan Roese +Date: Wed Nov 12 13:30:10 2008 +0100 + + serial: Add vcth UART driver + + This patch adds the UART driver for the upcoming VCTH board support. + + Signed-off-by: Stefan Roese + +commit 142a80ffc3b537a9c45acd2444a42a77f147c602 +Author: Ilya Yanok +Date: Thu Nov 13 19:49:36 2008 +0300 + + jffs2: cache data_crc results + + As we moved data_crc() invocation from jffs2_1pass_build_lists() to + jffs2_1pass_read_inode() data_crc is going to be calculated on each + inode access. This patch adds caching of data_crc() results. There + is no significant improvement in speed (because of flash access + caching added in previous patch I think, crc in RAM is really fast) + but this patch impacts memory usage -- every b_node structure uses + 12 bytes instead of 8. + + Signed-off-by: Alexey Neyman + Signed-off-by: Ilya Yanok + +commit 9b7076229ec6a958bd835ab70745f7676297ce82 +Author: Ilya Yanok +Date: Thu Nov 13 19:49:35 2008 +0300 + + jffs2: summary support + + This patch adds support for reading fs information from summary + node instead of scanning full eraseblock. + + Signed-off-by: Ilya Yanok + +commit 70741004dc28946cd82c7af6789c4ddb3fc94526 +Author: Ilya Yanok +Date: Thu Nov 13 19:49:34 2008 +0300 + + jffs2: add buffer to cache flash accesses + + With this patch JFFS2 code allocates memory buffer of max_totlen size + (size of the largest node, calculated during scan time) and uses it to + store entire node. Speeds up loading. If malloc fails we use old ways + to do things. + + Signed-off-by: Alexey Neyman + Signed-off-by: Ilya Yanok + +commit 8a36d31f72411144ac0412ee7e1880e801acd754 +Author: Ilya Yanok +Date: Thu Nov 13 19:49:33 2008 +0300 + + jffs2: rewrite jffs2 scanning code based on Linux one + + Rewrites jffs2_1pass_build_lists() function in style of Linux's + jffs2_scan_medium() and jffs2_scan_eraseblock(). + This includes: + - Caching flash acceses + - Smart dealing with free space + + Signed-off-by: Alexey Neyman + Signed-off-by: Ilya Yanok + +commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237 +Author: Ilya Yanok +Date: Thu Nov 13 19:49:32 2008 +0300 + + jffs2: add sector_size field to part_info structure + + This patch adds sector_size field to part_info structure (used + by new JFFS2 code). + + Signed-off-by: Ilya Yanok + +commit f73846956778a7dfee83403ef9747aff77198848 +Author: Ilya Yanok +Date: Thu Nov 13 19:49:31 2008 +0300 + + jffs2: fix searching for latest version in jffs2_1pass_list_inodes() + + We need to update i_version inside cycle to find really latest version + inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside + dump_inode() instead of calling expensive jffs2_1pass_read_inode(). + + Signed-off-by: Alexey Neyman + Signed-off-by: Ilya Yanok + +commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4 +Author: Wolfgang Denk +Date: Tue Dec 9 23:13:51 2008 +0100 + + evb64260: fix "cast to pointer from integer of different size" warnings + + Signed-off-by: Wolfgang Denk + +commit d2776827315c3d469b8cb4cec14d58877798daa2 +Author: Stefan Althoefer +Date: Sun Dec 7 19:39:11 2008 +0100 + + USB: descriptor handling + + Hi, + + I found a bug when working with the u-boot USB subsystem on IXP425 processor + (big endian Xscale aka ARMv5). + I recognized that the second usb_endpoint_descriptor of the attached memory + stick was corrupted. + + The reason for this are the packed structures below (either u-boot and + u-boot-usb): + + -------------- + /* Endpoint descriptor */ + struct usb_endpoint_descriptor { + unsigned char bLength; + unsigned char bDescriptorType; + unsigned char bEndpointAddress; + unsigned char bmAttributes; + unsigned short wMaxPacketSize; + unsigned char bInterval; + unsigned char bRefresh; + unsigned char bSynchAddress; + + } __attribute__ ((packed)); + /* Interface descriptor */ + struct usb_interface_descriptor { + unsigned char bLength; + unsigned char bDescriptorType; + unsigned char bInterfaceNumber; + unsigned char bAlternateSetting; + unsigned char bNumEndpoints; + unsigned char bInterfaceClass; + unsigned char bInterfaceSubClass; + unsigned char bInterfaceProtocol; + unsigned char iInterface; + + unsigned char no_of_ep; + unsigned char num_altsetting; + unsigned char act_altsetting; + struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + } __attribute__ ((packed)); + ------------ + + As usb_endpoint_descriptor is only 7byte in length, the start of all + odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize + of these structures also not word aligned. + + ARMv5 Architecture however does not support non-aligned multibyte + data type (see A2.8 of ARM Architecture Reference Manual). + + Signed-off-by: Stefan Althoefer + Signed-off-by: Remy Böhmer + +commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0 +Author: Kumar Gala +Date: Tue Dec 9 10:27:33 2008 -0600 + + drivers/fsl_pci_init: Fix compile warning + + fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows': + fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type + + The check only makes sense if we are CONFIG_PHYS_64BIT + + Signed-off-by: Kumar Gala + +commit dedacc18a8c2b3951581eb721fa055a4e0ac4845 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Dec 7 09:45:35 2008 +0100 + + usbtty/omap: update to current API + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Böhmer + +commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed +Author: Anatolij Gustschin +Date: Tue Dec 9 17:52:05 2008 +0100 + + video: fix FADS823 and RRvision compiling issues + + Since commit 561858ee building for FADS823 and RRvision + doesn't work. Let's include version.h and timestamp.h + unconditionally to fix the problem. + + Signed-off-by: Anatolij Gustschin + +commit 2d2e05727fe4013f807ffa814dff0e75259a1db4 +Author: Stefan Roese +Date: Tue Dec 2 10:53:47 2008 +0100 + + UBI: Fix size parsing in "ubi create" + + Signed-off-by: Stefan Roese + +commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e +Author: Stefan Roese +Date: Thu Nov 27 14:07:09 2008 +0100 + + UBI: Enable re-initializing of the "ubi part" command + + With this patch now, the user can call "ubi part" multiple times to + re-connect the UBI device to another MTD partition. + + Signed-off-by: Stefan Roese + +commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4 +Author: Stefan Roese +Date: Thu Nov 27 14:05:15 2008 +0100 + + MTD: Fix problem based on non-working relocation (list head mtd_partitions) + + Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon + first call of add_mtd_partitions(). Otherwise this won't work on platforms + where the relocation is broken (like MIPS or PPC). + + Signed-off-by: Stefan Roese + +commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47 +Author: Trent Piepho +Date: Wed Nov 12 17:29:48 2008 -0800 + + Section name should be ".data", not "data" + + Signed-off-by: Trent Piepho + Signed-off-by: Wolfgang Denk + +commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15 +Author: Wolfgang Denk +Date: Tue Dec 9 00:39:08 2008 +0100 + + MAKEALL: Automatically use parallel builds + + Add logic to the MAKEALL script to determine the number of CPU cores + on the system, and run a parallel build if there is more than one. + Usually this significantrly accelerates builds. + + Allow to manually adjust the number of parallel make jobs by using + the "BUILD_NCPUS" environment variable. + + Signed-off-by: Wolfgang Denk + +commit 268405fa7c44156c5192a70779920c70906af8d6 +Author: Wolfgang Denk +Date: Tue Dec 9 00:24:30 2008 +0100 + + vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23 + + Signed-off-by: Wolfgang Denk + +commit 153176a9414120ca1736f3cc4951623d6e14e6af +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Nov 11 06:08:59 2008 +0100 + + avr32/bootm: remove unused variable 'ret' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Haavard Skinnemoen + +commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183 +Author: Peter Tyser +Date: Wed Nov 12 13:06:48 2008 -0600 + + Remove unneeded CONFIG_SHELL references + + Make should be using the bash shell by default which makes + CONFIG_SHELL unnecessary + + Signed-off-by: Peter Tyser + +commit cf7a7b99794bac936899819b95539be1dbd71708 +Author: Peter Tyser +Date: Wed Nov 12 12:33:20 2008 -0600 + + Use bash for default GNU Make shell application + + Some Make script commands rely on bash-specific features like brace + expansion, so default to bash for the SHELL variable with a fallback + to the standard sh shell + + Signed-off-by: Peter Tyser + +commit 4b530018764934ad5689196e9aa5714a6f4d1a6c +Author: Heiko Schocher +Date: Wed Nov 12 09:50:45 2008 +0100 + + jffs2: rename devices_init () in common/jffs2.c + + rename devices_init () in common/jffs2.c to + jffs2_devices_init (), because there is also a + devices_init () in common/devices.c. + + Signed-off-by: Heiko Schocher + +commit af5eb847a10f1037590001355d88bab3fe7be48b +Author: Daniel Hellstrom +Date: Mon Nov 10 12:46:20 2008 +0000 + + SPARC: Fixed compiler error introduced by commit c160a9544743 + + This patch fixes a build error for the SPARC platform. It was + introduced by commit c160a9544743e80e8889edb2275538e7764ce334. + + Signed-off-by: Daniel Hellstrom + +commit 4c60259899aa00f59db0d936b8807f9a26411c0f +Author: Gary Jennejohn +Date: Sun Nov 9 12:50:59 2008 +0100 + + mgsuvd add the board-specific part of the HDLC driver + + Signed-off-by: Gary Jennejohn + +commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70 +Author: Gary Jennejohn +Date: Sun Nov 9 12:45:03 2008 +0100 + + mgcoge add the board-specific part of the HDLC driver + + Signed-off-by: Gary Jennejohn + +commit 135f5534538bb8ea4f38a7030da12187d22ef7e0 +Author: Gary Jennejohn +Date: Sun Nov 9 12:36:15 2008 +0100 + + keymile add the common parts of the HDLC driver + + This implements the ICN protocol used across the backplane and is + needed by all the keymile boards. + + Signed-off-by: Gary Jennejohn + +commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Nov 7 22:46:22 2008 +0100 + + drivers/bios_emulator: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5 +Author: Richard Retanubun +Date: Thu Nov 6 14:01:51 2008 -0500 + + common/cmd_ide.c: Corrected endian order printing for compact flash serial number. + + Corrected endian order printing for compact flash serial number. + + Signed-off-by: Richard Retanubun + +commit 16a28ef219c27423a1ef502f19070c4d375079b8 +Author: Gary Jennejohn +Date: Thu Nov 6 15:04:23 2008 +0100 + + IOMUX: Add console multiplexing support. + + Modifications to support console multiplexing. This is controlled using + CONFIG_SYS_CONSOLE_MUX in the board configuration file. + + This allows a user to specify multiple console devices in the environment + with a command like this: setenv stdin serial,nc. As a result, the user can + enter text on both the serial and netconsole interfaces. + + All devices - stdin, stdout and stderr - can be set in this manner. + + 1) common/iomux.c and include/iomux.h contain the environment setting + implementation. + 2) doc/README.iomux contains a somewhat more detailed description. + 3) The implementation in (1) is called from common/cmd_nvedit.c to + handle setenv and from common/console.c to handle initialization of + input/output devices at boot time. + 4) common/console.c also contains the code needed to poll multiple console + devices for input and send output to all devices registered for output. + 5) include/common.h includes iomux.h and common/Makefile generates iomux.o + when CONFIG_SYS_CONSOLE_MUX is set. + + Signed-off-by: Gary Jennejohn + +commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8 +Author: Mike Frysinger +Date: Tue Nov 4 16:03:46 2008 -0500 + + strings: use puts() rather than printf() + + When running `strings` on really long strings, the stack tends to get + smashed due to printf(). Switch to puts() instead since we're only passing + the data through. + + Signed-off-by: Mike Frysinger + +commit b03150b52e3c491a86a3cc0945274f0e8f9872e7 +Author: Niklaus Giger +Date: Mon Nov 3 22:16:18 2008 +0100 + + Use new CONFIG_SYS_VXWORKS parameters for Netstal boards + + Signed-off-by: Niklaus Giger + +commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9 +Author: Niklaus Giger +Date: Mon Nov 3 22:15:34 2008 +0100 + + cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters + + - fix size too small by one in sprintf + - changed old (pre 2004) device name ibmEmac to emac + - boot device may be overriden in board config + - servername may be defined in board config + - additional parameters may be defined in board config + - fixed some line wrappings + - replaced redundant MAX define by max + + Signed-off-by: Niklaus Giger + +commit e9084b23d16102f44ace24379a1c0c352497ef80 +Author: Niklaus Giger +Date: Mon Nov 3 22:14:36 2008 +0100 + + Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters + + Signed-off-by: Niklaus Giger + +commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f +Author: Niklaus Giger +Date: Mon Nov 3 22:13:47 2008 +0100 + + README: Document CONFIG_SYS parameters for vxworks + + Signed-off-by: Niklaus Giger + +commit ace514837cac656e29c37a19569cb8ea83071126 +Author: Peter Tyser +Date: Fri Oct 31 11:12:38 2008 -0500 + + lcd: Let the board code show board-specific info cleanup + + remove unneeded version.h from lcd.c + + Signed-off-by: Peter Tyser + Signed-off-by: Wolfgang Denk + +commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9 +Author: Peter Tyser +Date: Mon Nov 3 09:30:59 2008 -0600 + + Update U-Boot's build timestamp on every compile + + Use the GNU 'date' command to auto-generate a new U-Boot + timestamp on every compile. + + Signed-off-by: Peter Tyser + +commit 83ad179e2f0f625b88adb8ef5696709e46fb9077 +Author: Remy Bohmer +Date: Thu Dec 4 22:25:57 2008 +0100 + + Remove redundant armv4 flag from arm926ejs compile flags + + Currently the arm926ejs tree has the armv4 option set during compilation. + This flag does not belong here because a arm926 CPU is always a armv5 CPU. + + Signed-off-by: Remy Bohmer + +commit 89a7a87f084c657f8e32b513a77b50eca07e17ec +Author: Nicolas Ferre +Date: Sat Dec 6 13:11:14 2008 +0100 + + at91: Choose environment variables location within make config target + + This patch adds the possiblity to choose the media where the environment will + be located. This allow to choose this fundamental configuration without editing + config files. + + Documentation file added. + + Signed-off-by: Nicolas Ferre + Acked-by: Stelian Pop + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1450c4a6682378567030414a9f1198c39b7730c7 +Author: Anatolij Gustschin +Date: Mon Nov 3 15:30:34 2008 +0100 + + lwmon, tqm8xx: Fix build errors + + Commit 6b59e03e0237a40a2305ea385defdfd92000978b + lcd: Let the board code show board-specific info + + introduced some bugs which prevent U-Boot building + for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will + be defined in the board configuration. + + Also "LCD enabled" building for TQM823L doesn't work + since this commit. + + This patch fixes above-mentioned issues. + + Signed-off-by: Anatolij Gustschin + +commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0 +Author: Mike Frysinger +Date: Sun Nov 2 01:18:18 2008 -0400 + + ignore .gdb_history files + + When using gdb, history files will often get generated. So ignore them. + + Signed-off-by: Mike Frysinger + +commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 31 12:26:55 2008 +0100 + + FPGA: move fpga drivers to drivers/fpga + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0 +Author: Peter Tyser +Date: Mon Dec 1 16:29:38 2008 -0600 + + net: Fix TftpStart() ip:filename bug + + The TftpStart() function modifies the 'BootFile' + string when 'BootFile' contains both an IP address + and filename (eg 1.2.3.4:/path/file). This causes + subsequent calls to TftpStart to incorrectly parse + the TFTP filename and server IP address to use. + For example: + + => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant + Speed: 100, half duplex + Using eTSEC1 device + TFTP from server 10.52.0.62; our IP address is 10.52.253.79 + ^^^^^^^^^^ CORRECT + Filename '/home/ptyser/non_existant'. + ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT + Load address: 0x100000 + Loading: * + TFTP error: 'File not found' (1) + Starting again + + eTSEC2: No link. + Speed: 100, half duplex + Using eTSEC1 device + TFTP from server 10.52.0.33; our IP address is 10.52.253.79 + ^^^^^^^^^^ WRONG + Filename '10.52.0.62'. + ^^^^^^^^^^ WRONG + Load address: 0x100000 + Loading: * + TFTP error: 'File not found' (1) + Starting again + + TftpStart() was modified to not modify the 'BootFile' string. + + Signed-off-by: Peter Tyser + Signed-off-by: Ben Warren + +commit d32c5be50bf0600bfdc54223ef341ee9c63db445 +Author: Peter Tyser +Date: Mon Dec 1 16:26:21 2008 -0600 + + net: Add additional IP fragmentation check + + Ignore IP packets which have the "more fragments" flag bit + set. This flag indicates the IP packet is fragmented and + must be ignored by U-Boot. + + Signed-off-by: Peter Tyser + Signed-off-by: Ben Warren + +commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6 +Author: Peter Tyser +Date: Mon Dec 1 16:26:20 2008 -0600 + + net: Define IP flag field values + + These defines were pulled from the "Add simple + IP/UDP fragmentation support" patch from Frank + Haverkamp . + + Signed-off-by: Peter Tyser + Signed-off-by: Ben Warren + +commit 23afaba65ec5206757e589ef334a8b38168c045f +Author: Anatolij Gustschin +Date: Tue Dec 2 10:31:04 2008 +0100 + + net: tsec: Fix Marvell 88E1121R phy init + + This patch tries to ensure that phy interrupt pin + won't be asserted after booting. We experienced + following issues with current 88E1121R phy init: + + Marvell 88E1121R phy can be hardware-configured + to share MDC/MDIO and interrupt pins for both ports + P0 and P1 (e.g. as configured on socrates board). + Port 0 interrupt pin will be shared by both ports + in such configuration. After booting Linux and + configuring eth0 interface, port 0 phy interrupts + are enabled. After rebooting without proper eth0 + interface shutdown port 0 phy interrupts remain + enabled so any change on port 0 (link status, etc.) + cause assertion of the interrupt. Now booting Linux + and configuring eth1 interface will cause permanent + phy interrupt storm as the registered phy 1 interrupt + handler doesn't acknowledge phy 0 interrupts. This + of course should be fixed in Linux driver too. + + Signed-off-by: Anatolij Gustschin + Acked-by: Andy Fleming + Signed-off-by: Ben Warren + +commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed +Author: Peter Tyser +Date: Tue Dec 2 12:59:51 2008 -0600 + + net: Fix download command parsing + + When CONFIG_SYS_HUSH_PARSER is defined network download + commands with 1 argument in the format 'tftp "/path/file"' + do not work as expected. The hush command parser strips + the quotes from "/path/file" which causes the network + commands to interpret "/path/file" as an address + instead of the intended filename. + + The previous check for a leading quote in netboot_common() + was replaced with a check which ensures only valid + numbers are treated as addresses. + + Signed-off-by: Peter Tyser + Signed-off-by: Ben Warren + +commit 3c2c2f427905040c1513d0c51d637689cba48346 +Author: Remy Bohmer +Date: Thu Nov 27 22:30:27 2008 +0100 + + Remove non-ascii characters from fat code + + This code contains some non-ascii characters in comment lines and code. + Most editors do not display those characters properly and editing those + files results always in diffs at these places which are usually not required + to be changed at all. This is error prone. + + So, remove those weird characters and replace them by normal C-style + equivalents for which the proper defines were already in the header. + + Signed-off-by: Remy Bohmer + +commit dc889e865356497d3e495570118c2245ebce2631 +Author: Dave Liu +Date: Fri Nov 28 20:16:58 2008 +0800 + + 85xx: fix the wrong DDR settings for MPC8572DS + + The default DDR freq is 400MHz or 800M data rate, + the old settings is pure wrong for the default case. + + Signed-off-by: Dave Liu + Acked-by: Andy Fleming + +commit 9df59533f77de2829b4b66e5b7620e04edaa391c +Author: Kumar Gala +Date: Mon Nov 24 10:29:26 2008 -0600 + + 85xx: init gd as early as possible + + Moved up the initialization of GD so C code like set_tlb() can use + gd->flags to determine if we've relocated or not in the future. + + Signed-off-by: Kumar Gala + Acked-by: Andy Fleming + +commit aed461af81012a398a205e9be67ab37667491838 +Author: Kumar Gala +Date: Mon Nov 24 10:29:25 2008 -0600 + + 85xx: Fix relocation of CCSRBAR + + If the virtual address for CCSRBAR is the same after relocation but + the physical address is changing we'd end up having two TLB entries with + the same VA. Instead we new us the new CCSRBAR virt address + 4k as a + temp virt address to access the old CCSRBAR to relocate it. + + Signed-off-by: Kumar Gala + Acked-by: Andy Fleming + +commit ea154a1781135d822eedee7567cc156089eae93c +Author: Kumar Gala +Date: Mon Nov 24 10:25:14 2008 -0600 + + FSL: Moved BR_PHYS_ADDR for localbus to common header + + The BR_PHYS_ADDR macro is useful on all machines that have local bus + which is pretty much all 83xx/85xx/86xx chips. + + Additionally most 85xx & 86xx will need it if they want to support + 36-bit physical addresses. + + Signed-off-by: Kumar Gala + Acked-by: Andy Fleming + +commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08 +Author: Peter Tyser +Date: Mon Dec 1 13:47:12 2008 -0600 + + 85xx: Add PORDEVSR_PCI1 define + + Add define used to determine if PCI1 interface is in PCI or PCIX mode. + + Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 + + Signed-off-by: Peter Tyser + Signed-off-by: Andy Fleming + +commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3 +Author: Becky Bruce +Date: Fri Nov 21 19:24:22 2008 -0600 + + drivers/fsl_pci_init: Fix inbound window mapping bug + + The current code will cause the creation of a 4GB window + starting at 0 if we have more than 4GB of RAM installed, + which overlaps with PCI_MEM space and causes pci_bus_to_phys() + to return erroneous information. Limit the size to 4GB - 1; + which causes the code to create one 2GB and one 1GB window + instead. + + Signed-off-by: Becky Bruce + Signed-off-by: Kumar Gala + Acked-by: Andy Fleming + +commit 5a105a333dab6a23e92d763ce76d6f31d57f45df +Author: Jon Loeliger +Date: Thu Nov 20 15:36:48 2008 -0600 + + Removed unused CONFIG_L1_INIT_RAM symbol. + + Prevent further viral propogation of the unused + symbol CONFIG_L1_INIT_RAM by just removing it. + + Signed-off-by: Jon Loeliger + Acked-by: Andy Fleming + +commit 7008d26a40a76f90cae5824c812cfed449fb97b8 +Author: Ed Swarthout +Date: Wed Oct 29 09:21:44 2008 -0500 + + fsl ddr skip interleaving if not supported. + + Removed while(1) hang if memctl_intlv_ctl is set wrong. + Remove embedded tabs from strings. + + Signed-off-by: Ed Swarthout + Acked-by: Kumar Gala + Acked-by: Andy Fleming + +commit dd332e18d082de75eca3fc2c7c778f5d4571a096 +Author: Anatolij Gustschin +Date: Thu Nov 13 18:08:57 2008 +0100 + + 85xx: socrates: fix DDR SDRAM tlb entry configuration + + since commit be0bd8234b9777ecd63c4c686f72af070d886517 + tlb entry for socrates DDR SDRAM will be reconfigured + by setup_ddr_tlbs() from initdram() causing an + inconsistency with previously configured DDR SDRAM tlb + entry from tlb_table: + + socrates>l2cam 7 9 + IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS + 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX + 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX + 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX + + This patch makes the presence of the DDR SDRAM tlb entry in + the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this + inconsistency. + + Signed-off-by: Anatolij Gustschin + Acked-by: Andy Fleming + +commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d +Author: Peter Tyser +Date: Tue Nov 11 10:17:10 2008 -0600 + + 85xx: Add CPU 2 errata workaround to all 8548 boards + + All mpc8548-based boards should implement the suggested workaround + to CPU 2 errata. Without the workaround, its possible for the + 8548's core to hang while executing a msync or mbar 0 instruction + and a snoopable transaction from an I/O master tagged to make + quick forward progress is present. + + Signed-off-by: Peter Tyser + Acked-by: Andy Fleming + +commit e57f0fa1333cdf3ca36110aac2900712a5f82976 +Author: Dave Liu +Date: Tue Oct 28 17:53:45 2008 +0800 + + 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case + + we need TLB entry for DDR at !SPD case. + + Signed-off-by: Dave Liu + Acked-by: Andy Fleming + +commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8 +Author: Dave Liu +Date: Tue Oct 28 17:53:38 2008 +0800 + + 85xx: remove the unused ddr_enable_ecc in the board file + + The DDR controller of 8548/8544/8568/8572/8536 processors + have the ECC data init feature, and the new DDR code is + using the feature, and we don't need the way with DMA to + init memory any more. + + Signed-off-by: Dave Liu + Acked-by: Andy Fleming + +commit 4a129a57d923f7c15aa1f567028a80a32d66a100 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 30 19:36:53 2008 +0100 + + at91rm9200dk: Fix typo + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Nov 30 19:36:50 2008 +0100 + + AT91: remove non supported board AT91RM9200DF macro + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit bd876772ee04095e5dd943d97515a1f14bad4b1c +Author: Ilko Iliev +Date: Tue Dec 2 17:27:54 2008 +0100 + + mtd/dataflash.c: fix a problem with the last partition + + This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash + partition can be defined to use the area to the end of dataflash size. + Now it is possible to have only one dataflash partition from 0 to the end + of of dataflash size. + + Signed-off-by: Ilko Iliev + +commit 03f797793b124dccaae145b977d15d6cb9e74504 +Author: Ilko Iliev +Date: Tue Dec 2 17:20:17 2008 +0100 + + fix some coding style violations. + + This patch fix some coding style violations. + + Signed-off-by: Ilko Iliev + +commit 5e46b1e54112f4b7fd5185665e571510132c12a7 +Author: Stefan Roese +Date: Thu Nov 27 14:11:37 2008 +0100 + + OneNAND: Add missing mtd info struct before calling onenand_erase() + + Without this patch "saveenv" crashes when MTD partitions are enabled (e.g. + for use in UBI) via CONFIG_MTD_PARTITIONS. + + Signed-off-by: Stefan Roese + Signed-off-by: Scott Wood + +commit 29382d4064fbaff5daacff4c3209370fa5713966 +Author: Becky Bruce +Date: Thu Nov 20 16:43:52 2008 -0600 + + mpc8641: Fix error in README + + I made some updates to the code that didn't make it into the + README - fix this + + Signed-off-by: Becky Bruce + +commit 801a194616d95e6fc426a176d9615ccbf9876c7f +Author: Jon Loeliger +Date: Thu Nov 20 12:01:02 2008 -0600 + + Removed unused CONFIG_L1_INIT_RAM symbol. + + Prevent further viral propogation of the unused + symbol CONFIG_L1_INIT_RAM by just removing it. + + Signed-off-by: Jon Loeliger + +commit f698738e46cb461e28c2d58228bb34a2fcf5a475 +Author: Jon Loeliger +Date: Thu Nov 20 14:02:56 2008 -0600 + + 86xx: Fix non-64-bit compilation problems. + + Introducing 64-bit (36-bit) support for the MPC8641HPCN + failed to accomodate the other two 86xx boards. + Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH} + CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L} + with nominal 32-bit values. + + Signed-off-by: Jon Loeliger + Acked-by: Becky Bruce + +commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd +Author: Michael Trimarchi +Date: Wed Nov 26 17:40:37 2008 +0100 + + Remove obsolete command (apply afte USB style patch, 80 chars strict) + + Remove USB obsolete commmand + + Signed-off-by: Michael Trimarchi + Signed-off-by: Remy Böhmer + +commit de39f8c19d7c12017248c49d432dcb81db68f724 +Author: Michael Trimarchi +Date: Wed Nov 26 17:41:34 2008 +0100 + + USB style patch, 80 chars strict + + USB Code style patch + + Signed-off-by: Michael Trimarchi + Signed-off-by: Remy Böhmer + +commit d10c5a87cb8affbb4d35a311370316d4383d598e +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Nov 7 22:46:21 2008 +0100 + + drivers/usb: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Böhmer + +commit 2077e348c2a84901022ad95311b47b70361e6daa +Author: Scott Wood +Date: Tue Nov 25 10:47:02 2008 -0600 + + NAND: Fix misplaced return statement in nand_{read,write}_skip_bad(). + + This caused the operation to be needlessly repeated if there were + no bad blocks and no errors. + + Signed-off-by: Valeriy Glushkov + Signed-off-by: Scott Wood + +commit 89295028e7d8f7a524f485328279d72fdb102385 +Author: Michal Simek +Date: Mon Nov 24 12:09:50 2008 +0100 + + ppc4xx: ml300 remove Xilinx BSP from ml300 folder + + This BSP should be outside u-boot source tree. + The second reason is that xilinx ppc405 was moved to generic platform. + + Signed-off-by: Michal Simek + Signed-off-by: Stefan Roese + +commit 24eea623d4974a169026a975ba12fb23d48154b1 +Author: Matthias Fuchs +Date: Mon Nov 24 15:11:10 2008 +0100 + + ppc4xx: Remove unused features + + This patch disables some unused features from the PCI405 configuration + to keep U-Boot image size below 192k. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b +Author: Matthias Fuchs +Date: Mon Nov 24 15:11:09 2008 +0100 + + ppc4xx: Use correct io accessors for PCI405 + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 348c849d86a6f0785752b9bc497a34658713d1d1 +Author: Matthias Fuchs +Date: Mon Nov 24 15:11:08 2008 +0100 + + ppc4xx: Remove unused code from PCI405 code + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 58c696eed839af894e0265064669c402dc28b371 +Author: Wolfgang Denk +Date: Mon Nov 24 21:50:59 2008 +0100 + + AT91RM9200DK: fix broken boot from NOR flash + + Signed-off-by: Wolfgang Denk + +commit 8052352f20b33bef8f9872fc983eac73d4693c38 +Author: Jens Scharsig +Date: Tue Nov 18 10:48:46 2008 +0100 + + at91rm9200: fix broken boot from nor flash + + This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if + CONFIG_AT91RM9200 is defined and nor preloader is used. + + Signed-off-by: Jens Scharsig + +commit 25ea652e907516a283b38237e83712a918f125d7 +Author: Piotr Ziecik +Date: Mon Nov 17 15:58:00 2008 +0100 + + UBI: Add proof-of-concept CFI flash support + + With this patch UBI can be used on CFI flash chips. + + Signed-off-by: Piotr Ziecik + Signed-off-by: Stefan Roese + +commit e6a7edbc1778d27431ac663b40a71dafa5d20578 +Author: Piotr Ziecik +Date: Mon Nov 17 15:57:59 2008 +0100 + + mtd: Remove a printf() from add_mtd_device(). + + Remove a printf() from add_mtd_device(), which produces spurious output. + + Signed-off-by: Piotr Ziecik + Signed-off-by: Stefan Roese + +commit 91809ed51d8327a8dbbf29aa98a091154c282171 +Author: Piotr Ziecik +Date: Mon Nov 17 15:57:58 2008 +0100 + + cfi-mtd: Add cfi-mtd driver. + + Add cfi-mtd driver, which exports CFI flash to MTD layer. + This allows CFI flash devices to be used from MTD layer. + + Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD + option. Initialization is done by calling cfi_mtd_init() from + flash_init(). + + Signed-off-by: Piotr Ziecik + Signed-off-by: Stefan Roese + +commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2 +Author: Piotr Ziecik +Date: Mon Nov 17 15:49:32 2008 +0100 + + cfi_flash: Add interface for flash verbosity control + + Add interface for flash verbosity control. It allows + to disable output from low-level flash API. It is useful + when calling these low-level functions from context other + than flash commands (for example the MTD/CFI interface + implmentation). + + Signed-off-by: Piotr Ziecik + Signed-off-by: Stefan Roese + +commit ebc9784ce6528385bb8d2558e783622d4bbf20f8 +Author: Piotr Ziecik +Date: Thu Nov 20 15:17:38 2008 +0100 + + cfi_flash: Export flash_sector_size() function. + + Export flash_sector_size() function from drivers/mtd/cfi_flash.c, + so that it can be used in the upcoming cfi-mtd driver. + + Signed-off-by: Piotr Ziecik + Signed-off-by: Stefan Roese + +commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d +Author: Stefan Roese +Date: Mon Nov 17 14:45:22 2008 +0100 + + cfi_flash: Make all flash access functions weak + + This patch defines all flash access functions as weak so that + they can be overridden by board specific versions. + + This will be used by the upcoming VCTH board support where the NOR + FLASH unfortunately can't be accessed memory-mapped. Special + accessor functions are needed here. + + To enable this weak functions you need to define + CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header. + Otherwise the "old" default functions will be used resulting + in smaller code. + + Signed-off-by: Stefan Roese + Acked-by: Haavard Skinnemoen + +commit a5c4067017631d903e1afa6ad615f0ce19fea517 +Author: Stefan Roese +Date: Mon Nov 24 08:31:16 2008 +0100 + + UBI: Change parsing of size in commands to default to hex + + Currently the size parameters of the UBI commands (e.g. "ubi write") are + decoded as decimal instead of hex as default. This patch now interprets + all these values consistantly as hex, as all other standard U-Boot commands + do. + + Signed-off-by: Stefan Roese + +commit de01c76c3ccc4e6c5989228eed58e955a3a1a968 +Author: Stefan Roese +Date: Fri Nov 21 13:06:06 2008 +0100 + + ppc4xx: ML2 shouldn't include the 4xx EMAC driver + + Signed-off-by: Stefan Roese + +commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f +Author: Yuri Tikhonov +Date: Fri Nov 14 16:19:19 2008 +0300 + + ppc4xx: katmai: Change default config + + This patch enables support for EXT2, and increases the + CONFIG_SYS_BOOTMAPSZ size for the default configuration + of the katmai boards to use them as the RAID-reference + AMCC setups. + + EXT2 enabling allows one to boot kernels from the EXT2 + formatted Compact Flash cards. + + CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the + Linux kernels, which use PAGE_SIZE of 256KB. Otherwise, + the memory area with DTB file (which is placed at the + end of the bootmap area) will turn out to be overlapped + with the BSS segment of the 256KB kernel, and zeroed + in early_init() of Linux. + + Actually, increasing of the bootmap size could be done + via setting of the bootm_size U-Boot variable, but it looks + like the current U-Boot implementation have some bootm_size- + related functionality lost. In many places through the U-Boot + code the CONFIG_SYS_BOOTMAPSZ definition is used directly + (instead of trying to read the corresponding value from the + environment). The same is truth for the boot_jump_linux() + function in lib_ppc/bootm.c, where U-Boot transfers control + to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size) + value to the booting kernel. + + Signed-off-by: Yuri Tikhonov + Signed-off-by: Ilya Yanok + Signed-off-by: Stefan Roese + +commit ddf45cc758d394591fb9bcdcbe96530f733f2bce +Author: Dave Mitchell +Date: Thu Nov 20 14:09:50 2008 -0600 + + ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization + + Expanded OCM TLB to allow access to 64K OCM as well as 256K of + internal SRAM. + + Adjusted internal SRAM initialization to match updated user + manual recommendation. + + OCM & ISRAM are now mapped as follows: + physical virtual size + ISRAM 0x4_0000_0000 0xE300_0000 256k + OCM 0x4_0004_0000 0xE304_0000 64k + + A single TLB was used for this mapping. + + Signed-off-by: Dave Mitchell + Signed-off-by: Stefan Roese + +commit b14ca4b61a681f75f3125676e09d7ce6af66e927 +Author: Dave Mitchell +Date: Thu Nov 20 14:00:49 2008 -0600 + + ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs + + Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and + L2 cache DCRs from ppc440.h to this new header. + + Also converted these DCR defines from lowercase to uppercase and + modified referencing modules to use them. + + Signed-off-by: Dave Mitchell + Signed-off-by: Stefan Roese + +commit 711e2b2af820d21d9931d4cf8057d3894600fd54 +Author: Steven A. Falco +Date: Thu Nov 20 14:37:57 2008 -0500 + + ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h + + The definitions of bits in SDR_CFG are incorrect, and not used within + U-Boot. Therefore, they can be removed. + + The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions, + and are unused, so they can be removed too. + + A definition for SDR0_DDRCFG is added. + + Signed-off-by: Steven A. Falco + Signed-off-by: Stefan Roese + +commit e23c7c95a96eb0f068efe5c532215a10a1512a95 +Author: Dirk Behme +Date: Mon Nov 10 20:15:25 2008 +0100 + + ARM: OMAP: Convert IO macros + + Convert IO macros to readx/writex. + + Signed-off-by: Dirk Behme + +commit 263b749e2e25473a48776d317bd2a7e2ddcdd212 +Author: Ilko Iliev +Date: Sun Nov 9 15:53:14 2008 +0100 + + lib_arm: do_bootm_linux() - correct a small mistake + + This patch corrects a small bug in the "if" condition: + the parameter "flag" is 0 and the "if" condition is always true. + The result is - the boom command doesn't start the kernel. + Affected targets: all arm based. + + Signed-off-by: Ilko Iliev + +commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc +Author: Stelian Pop +Date: Sun Nov 9 00:14:46 2008 +0100 + + AT91: Enable PLLB for USB + + At least some (old ?) versions of the AT91Bootstrap do not set up the + PLLB correctly to 48 MHz in order to make USB host function correctly. + + This patch sets up the PLLB to the same values Linux uses, and makes USB + work ok on the following CPUs: + - AT91CAP9 + - AT91SAM9260 + - AT91SAM9263 + + This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all + the relevant AT91CAP9/AT91SAM9 atmel boards. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb +Author: Stelian Pop +Date: Fri Nov 7 13:55:14 2008 +0100 + + AT91: Use AT91_CPU_CLOCK in displays + + Introduce AT91_CPU_CLOCK and use it for displaying the CPU + speed in the LCD driver. + + Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the + corresponding board clocks. + + Signed-off-by: Stelian Pop + +commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0 +Author: Stefan Roese +Date: Thu Nov 20 11:46:20 2008 +0100 + + ppc4xx: Clear all potentially pending exceptions in MCSR + + This is needed on Canyonlands which still has an exception pending + while running relocate_code(). This leads to a failure after trap_init() + is moved to the top of board_init_r(). + + Signed-off-by: Stefan Roese + +commit facdad5f2602e899a01746916beddbf9e856b5ee +Author: Heiko Schocher +Date: Wed Nov 19 10:10:30 2008 +0100 + + powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines + + Signed-off-by: Heiko Schocher + Signed-off-by: Kim Phillips + +commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4 +Author: Howard Gregory +Date: Tue Nov 4 14:55:33 2008 +0800 + + mpc83xx: Improve the performance of DDR memory + + modify the CAS timings. my understanding is that these + settings decrease various wait times in the DDR interface. + Because these wait times are in clock cycles, and the DDR + clock on the 8315 RDB runs slower than on some other 83xx + platforms, we can dial down these values without a problem, + thereby decreasing the latency of memory a little. + + Signed-off-by: Howard Gregory + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 8000b086b33a5a81f3f390f37e178db7956dc08b +Author: Kyungmin Park +Date: Fri Oct 24 14:55:33 2008 +0200 + + ARM: Add Apollon UBI support + + To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI + macro. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 694a0b3f1c0accd0de94b89555155d69f8022824 +Author: Kyungmin Park +Date: Wed Nov 19 11:47:05 2008 +0100 + + UBI: Add UBI command support + + This patch adds these UBI commands: + + ubi part [nand|onenand] [part] - Show or set current partition + ubi info [l[ayout]] -Display volume and UBI layout information + ubi create[vol] volume [size] [type] - Create volume name with size + ubi write[vol] address volume size - Write volume from address with size + ubi read[vol] address volume [size] - Read volume to address with size + ubi remove[vol] volume - Remove volume + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 58be3a1056d88c6d05f3e914389282807e69923a +Author: Kyungmin Park +Date: Wed Nov 19 16:38:24 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 8/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9 +Author: Kyungmin Park +Date: Wed Nov 19 16:36:36 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 7/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a +Author: Kyungmin Park +Date: Wed Nov 19 16:32:36 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 6/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit c91a719daa331b5856109313371e4ece5ec06d96 +Author: Kyungmin Park +Date: Wed Nov 19 16:28:06 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 5/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b +Author: Kyungmin Park +Date: Wed Nov 19 16:27:23 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 4/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea +Author: Kyungmin Park +Date: Wed Nov 19 16:26:54 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 3/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 961df83361aff9a14f226214224eb8a06e05ba24 +Author: Kyungmin Park +Date: Wed Nov 19 16:25:44 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 2/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit f399d4a281713d5ef2d764f05d545fe61e3bd569 +Author: Kyungmin Park +Date: Wed Nov 19 16:23:06 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 1/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79 +Author: Kyungmin Park +Date: Wed Nov 19 16:20:36 2008 +0100 + + MTD: Add MTD paritioning infrastructure + + This MTD part infrastructure will be used by the upcoming + UBI support. + + Signed-off-by: Kyungmin Park + Signed-off-by: Stefan Roese + +commit 9b827cf1720acda2473afa516956eab6f7cca9a1 +Author: Selvamuthukumar +Date: Thu Oct 16 22:54:03 2008 +0530 + + Align end of bss by 4 bytes + + Most of the bss initialization loop increments 4 bytes + at a time. And the loop end is checked for an 'equal' + condition. Make the bss end address aligned by 4, so + that the loop will end as expected. + + Signed-off-by: Selvamuthukumar + Signed-off-by: Wolfgang Denk + +commit 3f510db522d160179dff3ddcce9b18f6241c2c24 +Author: Becky Bruce +Date: Mon Nov 10 19:45:35 2008 -0600 + + mpc8641: fix address-cells default in old .dts detection + + address-cells defaults to 2, not 1; so in the unlikely + event that it isn't specified, this patch is required + for correct operation. + + Signed-off-by: Becky Bruce + +commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a +Author: Becky Bruce +Date: Fri Oct 31 17:14:39 2008 -0500 + + lib_ppc: Move trap_init to occur earlier + + Doing trap_init immediately once we're running from RAM + means we're no longer dependent on the physical location of + the flash on non-BookE platforms. Before trap_init, those + platforms switch to real mode and go to 0xfff00100 on exception. + After the switch, they go to 0x00000100 This makes it easier to + move the flash location. + + Signed-off-by: Becky Bruce + +commit d52082b12c6e545705a19433a2f4142526536189 +Author: Becky Bruce +Date: Fri Nov 7 13:46:19 2008 -0600 + + mpc8641: Try to detect old .dts files + + Since we've changed the memory map of the board, be nice and + add some checking to try to catch out-of-date .dts files. We do + this by checking the CCSRBAR location in the .dts and comparing + it to the CCSRBAR location in u-boot. If they don't match, a + warning msg is printed. This isn't foolproof, but it's simple and + will catch most of the cases where an out-of-date .dts is present, + including all of the cases where a new u-boot is used with an old + standard MPC8641 .dts file as supplied with Linux. + + Signed-off-by: Becky Bruce + +commit 8db0400a27839f91c047dcb83f4a0f09e054a180 +Author: Becky Bruce +Date: Thu Nov 6 13:04:09 2008 -0600 + + toplevel Makefile: Add MPC8641HPCN_36BIT target + + This will enable CONFIG_PHYS_36BIT for MPC8641HPCN. + + Signed-off-by: Becky Bruce + +commit 3111d32c494e8251b90917447796a7206b757e1e +Author: Becky Bruce +Date: Thu Nov 6 17:37:35 2008 -0600 + + mpc8641: Support 36-bit physical addressing + + This patch creates a memory map with all the devices + in 36-bit physical space, in addition to the 32-bit map. + The CCSR relocation is moved (again, sorry) to + allow for the physical address to be 36 bits - this + requires translation to be enabled. With 36-bit physical + addressing enabled, we are no longer running with VA=PA + translations. This means we have to distinguish between + the two in the config file. The existing region name is + used to indicate the virtual address, and a _PHYS variety + is created to represent the physical address. + + Large physical addressing is not enabled by default. + Set CONFIG_PHYS_64BIT in the config file to turn this on. + + Signed-off-by: Becky Bruce + +commit c759a01a0022de9378a3a761f49786f87684c916 +Author: Becky Bruce +Date: Thu Nov 6 17:36:04 2008 -0600 + + mpc8641: Change 32-bit memory map + + The memory map on the 8641hpcn is modified to look more like + the 85xx boards; this is a step towards a more standardized + layout going forward. As part of this change, we now relocate + the flash. + + The regions for some of the mappings were far larger than they + needed to be. I have reduced the mappings to match the + actual sizes supported by the hardware. + + In addition I have removed the comments at the head + of the BAT blocks in the config file, rather than updating + them. These get horribly out of date, and it's a simple + matter to look at the defines to see what they are set to + since everything is right here in the same file. + + Documentation has been changed to reflect the new map, as this + change is user visible, and affects the OS which runs post-uboot. + + Signed-off-by: Becky Bruce + +commit bf9a8c34309ed9276258295db9e9212aabb2531a +Author: Becky Bruce +Date: Wed Nov 5 14:55:35 2008 -0600 + + mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY + + We define CONFIG_MONITOR_BASE_EARLY to define the initial location + of the bootpage in flash. Use this to create an early mapping + definition for the FLASH, and change the early_bats code to use this. + + This change facilitates the relocation of the flash since the early + mappings are no longer tied to the final location of the flash. + + Signed-off-by: Becky Bruce + +commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d +Author: Becky Bruce +Date: Wed Nov 5 14:55:34 2008 -0600 + + mpc86xx: Use SRR0/1/rfi to enable address translation, not blr + + Using a mtmsr/blr means that you have to be executing at the + same virtual address once you enable translation. This is + unnecessarily restrictive, and is not really how this is + usually done. Change it to use the more common mtspr SRR0/SRR1 + and rfi method. + + Signed-off-by: Becky Bruce + +commit 6bf98b1362f0cb237620355ed3e6762fff82388d +Author: Becky Bruce +Date: Wed Nov 5 14:55:33 2008 -0600 + + mpc8641: make DIAG_ADDR == FLASH_BASE + + Currently, that's what it is, but it's hardcoded. + + Signed-off-by: Becky Bruce + +commit 170deacb1ddc39164bdb68f3963e0c0456a5369b +Author: Becky Bruce +Date: Wed Nov 5 14:55:32 2008 -0600 + + mpc8641: Drop imaginary second flash bank, map 8MB + + There's a lot of setup and foo for the second flash + bank. The problem is, this board doesn't actually have one. + Clean this up. Also, the flash is 8M in size. Get rid + of the confusing aliased overmapping, and just map 8M. + + Signed-off-by: Becky Bruce + +commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4 +Author: Becky Bruce +Date: Wed Nov 5 14:55:31 2008 -0600 + + mpc8641: only define CONFIG_ENV_SIZE once + + It's currently defined twice inside in an if/else block, but + both halves set the same value. Move the define outside + the if. + + Signed-off-by: Becky Bruce + +commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93 +Author: Becky Bruce +Date: Wed Nov 5 14:55:30 2008 -0600 + + mpc86xx: Move setup_bats into cpu_init_f + + In order to later allow for a physical relocation of the + flash, setup_bats, which sets up the final BAT mapping + for the board, needs to happen *after* init_laws(). + Otherwise, there will be no window programmed for the flash + at the new physical location at the point when we change + the mmu translation. + + Signed-off-by: Becky Bruce + +commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17 +Author: Becky Bruce +Date: Wed Nov 5 14:55:29 2008 -0600 + + mpc8641: Remove extra "0" from BR2 define + + Signed-off-by: Becky Bruce + +commit edf3fe7d39a1ee07353128af5221422ce9ccfad6 +Author: Richard Retanubun +Date: Thu Oct 23 09:08:18 2008 -0400 + + drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver. + + Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c. + This adds support for PHY-less MAC connections to the UEC. + + Signed-off-by: Richard Retanubun + Signed-off-by: Ben Warren + +commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6 +Author: TsiChung Liew +Date: Thu Oct 23 16:27:24 2008 +0000 + + ColdFire: Add mii driver in drivers/net + + All CF platforms' mii.c are consolidated into one + + Signed-off-by: TsiChung Liew + Signed-off-by: Ben Warren + +commit 25a859066b3af1070eb69f12022113c0a91bd813 +Author: Ben Warren +Date: Mon Oct 27 23:53:17 2008 -0700 + + Moved initialization of PPC4xx EMAC to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren + Acked-by: Stefan Roese + +commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126 +Author: Ben Warren +Date: Sun Nov 9 21:29:23 2008 -0800 + + Moved PPC4xx EMAC driver to drivers/net + + Also changed path in all linker scripts that reference this driver + + Signed-off-by: Ben Warren + Acked-by: Stefan Roese + +commit 96e21f86e8266ed40759e5495ee461265d7f6d28 +Author: Ben Warren +Date: Mon Oct 27 23:50:15 2008 -0700 + + Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC + + All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG + + Signed-off-by: Ben Warren + Acked-by: Stefan Roese + +commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd +Author: Ben Warren +Date: Thu Oct 23 22:02:49 2008 -0700 + + Moved initialization of MPC8XX SCC to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren + +commit a9bec96d6359ac9f90a852962bf3040cad9e0256 +Author: Ben Warren +Date: Wed Oct 22 23:47:51 2008 -0700 + + Moved initialization of MPC8220 FEC to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren + +commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5 +Author: Ben Warren +Date: Wed Oct 22 23:32:48 2008 -0700 + + Moved initialization of QE Ethernet controller to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren + +commit 3456a148276d5494b53ee40242efb6462d163504 +Author: Ben Warren +Date: Wed Oct 22 23:20:29 2008 -0700 + + Moved initialization of FCC Ethernet controller to cpu_eth_init + + Affected boards: + Several MPC8xx boards + Several MPC8260/MPC8272 boards + Several MPC85xx boards + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren + +commit 62e15b497f5c6334c059512678c8db7940ae4c61 +Author: Ben Warren +Date: Thu Oct 30 22:15:35 2008 -0700 + + Fix typo in cpu/mpc85xx/cpu.c + + CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC + + Signed-off-by: Ben Warren + +commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3 +Author: Shinya Kuribayashi +Date: Sun Oct 19 12:08:50 2008 +0900 + + net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init + + This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init + as a part of ongoing eth_initialize cleanup work. The function ret value + is also fixed as it should be negative on fail. + + Signed-off-by: Shinya Kuribayashi + Signed-off-by: Ben Warren + +commit cc94074ecac1885d18ddb683eb934b3c0268aa5b +Author: Ben Warren +Date: Fri Sep 5 01:55:22 2008 -0400 + + Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init() + + Also, removed the driver initialization from net/eth.c + + Signed-off-by: Ben Warren + +commit f2a7806fc23e82d30c8548911369e0c530607354 +Author: Clive Stubbings +Date: Mon Oct 27 15:05:00 2008 +0000 + + xilinx_emaclite buffer overrun + + Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and + PKTSIZE_ALIGN bytes long. + + Acked-by: Michal Simek + + Signed-off-by: Ben Warren + +commit 0115b1953718a2969f6469d3d5da51ba11e12d42 +Author: richardretanubun +Date: Fri Sep 26 08:59:12 2008 -0400 + + NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg. + + The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0] + This patch makes these function use the devname argument that is passed in to + allow access to the phy registers of other devices in devlist[]. + + Signed-of-by: Richard Retanubun + + Signed-off-by: Ben Warren + +commit 44dcb7332033db8de2810f2fffcae3084f15c8d4 +Author: richardretanubun +Date: Mon Oct 6 15:31:43 2008 -0400 + + Adds two more ethernet interface to 83xx + + Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info. + Signed-off-by: Richard Retanubun + Signed-off-by: Ben Warren + +commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3 +Author: Stelian Pop +Date: Fri Nov 7 13:54:31 2008 +0100 + + AT91: Replace AT91_BASE_EMAC by the board specific values. + + AT91_BASE_EMAC is never used outside the board specific files, + so replace its usage by the board specific AT91xxx_BASE_EMAC. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c91e17affa175ce06afa89b04752301eb4a61666 +Author: Stelian Pop +Date: Fri Nov 7 12:09:21 2008 +0100 + + AT91: Replace (undefined) AT91_ID_US* by the board specific values. + + AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined. + Since they are never used outside the board specific files, they can + be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 / + AT91xxx_ID_US2. + + Bug spotted by Jesus Alvarez . + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Nov 1 10:47:59 2008 +0100 + + Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1079432e04ccf71aa3684181186182cd63512f19 +Author: Sergey Lapin +Date: Fri Oct 31 12:28:43 2008 +0100 + + Custom AFEB9260 board support + + This patch provides support for AFEB9260 board, a product of + OpenSource hardware and software. Some commertial projects + are made with this design. A board is basically AT91SAM9260-EK + with some modifications and different peripherals and different + parts used. Main purpose of this project is to gain experience in + hardware design. + More info: http://groups.google.com/group/arm9fpga-evolution-board + (In Russian only, sorry). + Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb + + Signed-off-by: Sergey Lapin + +commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00 +Author: Tomohiro Masubuchi +Date: Tue Oct 21 13:17:16 2008 +0900 + + Change to use "do_div" macro + + Signed-off-by: Tomohiro Masubuchi + +commit e352495318d8056a00faa21b633b3e4374bfbf52 +Author: Roman Mashak +Date: Wed Oct 22 16:00:26 2008 -0400 + + ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory + + OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory. + It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap + + Signed-off-by: Roman Mashak + +commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb +Author: Roman Mashak +Date: Tue Oct 21 03:01:41 2008 -0700 + + ARM/Versatile port: Removed unused functions + + Removal of never used functions. + + Signed-off-by: Roman Mashak + +commit 1266df887781c779deaf6d05eea2ef90a470cb34 +Author: Becky Bruce +Date: Mon Nov 3 15:44:01 2008 -0600 + + powerpc: change 86xx SMP boot method + + We put the bootpg for the secondary cpus into memory and use + BPTR to get to it. This is a step towards converting to the + ePAPR boot methodology. Also, the code is written to + deal properly with more than 4GB of RAM. + + Signed-off-by: Becky Bruce + +commit b5431560682d8f318fbc49db87cfe13ab41d2ee4 +Author: Becky Bruce +Date: Fri Oct 31 17:13:49 2008 -0500 + + 8641HPCN: Config file cleanup + + There are several items in the config file that were hardcoded + but that should really be based on other config options, since + the regions are contiguous and depend on being so. This cleans + that up a bit. Also, add BR_PHYS_ADDR() macro to convert + addresses into the proper format for BR registers. + + Signed-off-by: Becky Bruce + +commit 4c77de3f144ca088c3867bd6240718c10f5a9d69 +Author: Becky Bruce +Date: Fri Oct 31 17:13:32 2008 -0500 + + 86xx: Make dram_size a phys_size_t + + It's currently a long and should be phys_size_t. + + Signed-off-by: Becky Bruce + +commit 104992fc541302a6bac74448e01e7fdad20abca0 +Author: Becky Bruce +Date: Sun Nov 2 18:19:32 2008 -0600 + + powerpc 86xx: Handle CCSR relocation earlier + + Currently, the CCSR gets relocated while translation is + enabled, meaning we need 2 BAT translations to get to both the + old location and the new location. Also, the DEFAULT + CCSR location has a dependency on the BAT that maps the + FLASH region. Moving the relocation removes this unnecessary + dependency. This makes it easier and more intutive to + modify the board's memory map. + + Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same + BAT for CCSR space. + + Signed-off-by: Becky Bruce + +commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf +Author: Becky Bruce +Date: Fri Oct 31 17:14:14 2008 -0500 + + mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build + + You can't actually have both, and with some coming changes to + change the memory map for the board and support 36-bit physical, + we need the extra BAT that is being consumed by having both. + + I also make non-PCI configs build cleanly, for the sake of sanity. + + Signed-off-by: Becky Bruce + +commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb +Author: Becky Bruce +Date: Fri Oct 31 17:14:00 2008 -0500 + + mpc8641: Stop supporting non-PCI_PNP configs + + We don't actually ever do this, remove the code so we + can stop maintaining it. + + Signed-off-by: Becky Bruce + +commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23 +Author: TsiChung Liew +Date: Fri Oct 24 12:59:12 2008 +0000 + + ColdFire: Fix M5329EVB and M5373EVB nand issue + + Fix compilation issue caused by a few mismatches. + Provide proper nand chip select enable/disable in + nand_hwcontrol() rather than in board_nand_init() + just enable once. Remove redundant local nand driver + functions - nand_read_byte(), nand_write_byte() and + nand_dev_ready() to use common nand driver. + + Signed-off-by: TsiChung Liew + +commit 1b2708442224a551a0b865b52710306333888932 +Author: TsiChung Liew +Date: Wed Oct 22 11:55:30 2008 +0000 + + ColdFire: Fix compilation error + + The error was caused by the change for strmhz() in cpu.c. + A few of them were one extra close parenthesis. + + Signed-off-by: TsiChung Liew + +commit 536e7dac16769954915a484e682a2efb28699133 +Author: TsiChung Liew +Date: Wed Oct 22 11:38:21 2008 +0000 + + ColdFire: Add MCF5301x CPU and M53017EVB support + + Signed-off-by: TsiChung Liew + +commit a21d0c2cc9add8894d971ab791f4032f077db817 +Author: TsiChung Liew +Date: Tue Oct 21 15:37:02 2008 +0000 + + ColdFire: Add SBF support for M52277EVB + + Add serial boot support + + Signed-off-by: TsiChung Liew + +commit b202816c61042c183fe67d097a5893b0f2dafba0 +Author: TsiChung Liew +Date: Tue Oct 21 14:19:26 2008 +0000 + + ColdFire: Use CFI driver for M5272C3 + + Signed-off-by: TsiChung Liew + +commit f3962d3f574e5a1cffacd4e9bc48713060a2a314 +Author: TsiChung Liew +Date: Tue Oct 21 13:47:54 2008 +0000 + + ColdFire: Relocate FEC's GPIO and mii functions protocols + + Place FEC pin assignments in cpu_init.c from platform's + mii.c + + Signed-off-by: TsiChung Liew + +commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802 +Author: TsiChung Liew +Date: Tue Oct 21 12:15:44 2008 +0000 + + ColdFire: Remove platforms mii.c file + + Will use mcfmii.c driver in drivers/net rather than + keep creating new mii.c for each future platform. + Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB, + M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB, + M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's + mii.c + + Signed-off-by: TsiChung Liew + +commit 012522fef3b382469125beb46a315ab4dee02fb0 +Author: TsiChung Liew +Date: Tue Oct 21 10:03:07 2008 +0000 + + ColdFire: Modules header files cleanup + + Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG, + MDHA, SKHA, INTC, and FlexBus structures and + definitions in immap_5xxx.h to more unify modules + header files. Append DSPI support for m547x_8x. + SSI cleanup. Remove USB Host structure from immap_539.h. + Apply changes to use FlexBus structures in mcf52x2's + cpu_init.c and platform configuration files. + + Signed-off-by: TsiChung Liew + +commit ac2331aee99ad36be0fcfed8c49922e3c61b576d +Author: TsiChung Liew +Date: Tue Oct 21 08:52:36 2008 +0000 + + ColdFire: Remove linker file + + Each different build for M54455EVB and M5235EVB will + create a u-boot.lds linker file. It is redundant to + keep the u-boot.lds + + Signed-off-by: TsiChung Liew + +commit 0829323073c505556ed5f5073f91adb504584d45 +Author: Peter Tyser +Date: Fri Oct 31 11:26:44 2008 -0500 + + ppc: Fix compile warnings when !CONFIG_OF_LIBFDT + + Signed-off-by: Peter Tyser + +commit a80b21d5127583171d6e9bc7f722947641898012 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 31 12:12:12 2008 +0100 + + common/Makefile: create others group for non core, environment and command files + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0 +Author: Wolfgang Denk +Date: Fri Oct 31 01:13:37 2008 +0100 + + TQM8260: use CFI flash driver instead of custom driver. + + Signed-off-by: Wolfgang Denk + +commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f +Author: Andy Fleming +Date: Thu Oct 30 17:35:30 2008 -0500 + + Consolidate MAX/MIN definitions + + There were several, now there is one (two if you count the lower-case + versions). + + Signed-off-by: Andy Fleming + +commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a +Author: Heiko Schocher +Date: Thu Oct 30 09:23:09 2008 +0100 + + mgsuvd: remove unused defines in config file. + + Signed-off-by: Heiko Schocher + +commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5 +Author: Wolfgang Denk +Date: Sun Nov 2 16:14:22 2008 +0100 + + Coding Style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk + commit a47f957ab523019992fdef857af01bd71c58a4da Author: Alessandro Rubini Date: Fri Oct 31 22:33:21 2008 +0100 -- cgit v1.2.3