From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/eltec/bab7xx/asm_init.S | 30 +++++++++++++++--------------- board/eltec/bab7xx/bab7xx.c | 10 +++++----- board/eltec/bab7xx/flash.c | 12 ++++++------ board/eltec/bab7xx/l2cache.c | 6 +++--- board/eltec/bab7xx/misc.c | 14 +++++++------- board/eltec/bab7xx/pci.c | 32 ++++++++++++++++---------------- board/eltec/bab7xx/srom.h | 4 ++-- board/eltec/elppc/asm_init.S | 28 ++++++++++++++-------------- board/eltec/elppc/elppc.c | 6 +++--- board/eltec/elppc/flash.c | 12 ++++++------ board/eltec/elppc/misc.c | 16 ++++++++-------- board/eltec/elppc/pci.c | 30 +++++++++++++++--------------- board/eltec/elppc/srom.h | 4 ++-- board/eltec/mhpc/flash.c | 28 ++++++++++++++-------------- board/eltec/mhpc/mhpc.c | 24 ++++++++++++------------ 15 files changed, 128 insertions(+), 128 deletions(-) (limited to 'board/eltec') diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S index 2a9b33e12..a85fb8b89 100644 --- a/board/eltec/bab7xx/asm_init.S +++ b/board/eltec/bab7xx/asm_init.S @@ -125,7 +125,7 @@ board_asm_init: lis r2, 0xfee0 ori r2, r2, 0xcfc -#ifdef CFG_ADDRESS_MAP_A +#ifdef CONFIG_SYS_ADDRESS_MAP_A /* * Switch to address map A if necessary. */ @@ -835,17 +835,17 @@ toggleError2: /* * Get base addr of ISA I/O space */ - lis r6, CFG_ISA_IO@h - ori r6, r6, CFG_ISA_IO@l + lis r6, CONFIG_SYS_ISA_IO@h + ori r6, r6, CONFIG_SYS_ISA_IO@l /* * Set offset to base address for config registers. */ -#if defined(CFG_NS87308_BADDR_0x) +#if defined(CONFIG_SYS_NS87308_BADDR_0x) addi r4, r0, 0x0279 -#elif defined(CFG_NS87308_BADDR_10) +#elif defined(CONFIG_SYS_NS87308_BADDR_10) addi r4, r0, 0x015C -#elif defined(CFG_NS87308_BADDR_11) +#elif defined(CONFIG_SYS_NS87308_BADDR_11) addi r4, r0, 0x002E #endif add r6, r6, r4 /* add offset to base */ @@ -867,7 +867,7 @@ toggleError2: addi r5, r0, SIO_LUNENABLE bl .sio_bw - lis r8, CFG_ISA_IO@h + lis r8, CONFIG_SYS_ISA_IO@h ori r8, r8, 0x0460 li r9, 0x03 stb r9, 0(r8) /* select PMC2 register */ @@ -898,7 +898,7 @@ toggleError2: /* * Init COM1 for polled output */ - lis r8, CFG_ISA_IO@h + lis r8, CONFIG_SYS_ISA_IO@h ori r8, r8, 0x03f8 li r9, 0x00 stb r9, 1(r8) /* int disabled */ @@ -972,8 +972,8 @@ waitEmpty1: /* * Get base addr of ISA I/O space */ - lis r3, CFG_ISA_IO@h - ori r3, r3, CFG_ISA_IO@l + lis r3, CONFIG_SYS_ISA_IO@h + ori r3, r3, CONFIG_SYS_ISA_IO@l addi r3, r3, 0x015C /* adjust to superI/O 87308 base */ or r6, r3, r3 /* make a copy */ @@ -1076,7 +1076,7 @@ waitEmpty1: */ .globl Printf Printf: - lis r10, CFG_ISA_IO@h /* COM1 port */ + lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ ori r10, r10, 0x03f8 WaitChr: @@ -1107,7 +1107,7 @@ OutHex4: OutHex: li r9, 28 /* shift reg for 8 digits */ OHstart: - lis r10, CFG_ISA_IO@h /* COM1 port */ + lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ ori r10, r10, 0x03f8 OutDig: lbz r0, 5(r10) /* read link status */ @@ -1149,7 +1149,7 @@ OutDec: mullw r10, r0, r6 subf r7, r10, r3 - lis r10, CFG_ISA_IO@h /* COM1 port */ + lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ ori r10, r10, 0x03f8 or. r7, r7, r7 @@ -1198,7 +1198,7 @@ OutDec6: */ .globl OutChr OutChr: - lis r10, CFG_ISA_IO@h /* COM1 port */ + lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ ori r10, r10, 0x03f8 OutChr1: @@ -1216,7 +1216,7 @@ OutChr1: spdRead: mfspr r26, 8 /* save link register */ - lis r30, CFG_ISA_IO@h + lis r30, CONFIG_SYS_ISA_IO@h ori r30, r30, 0x220 /* GPIO Port 1 */ li r7, 0x00 li r8, 0x100 diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c index 8c561161c..1f78f8d16 100644 --- a/board/eltec/bab7xx/bab7xx.c +++ b/board/eltec/bab7xx/bab7xx.c @@ -44,7 +44,7 @@ ulong bab7xx_get_bus_freq (void) * The GPIO Port 1 on BAB7xx reflects the bus speed. */ volatile struct GPIO *gpio = - (struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE); + (struct GPIO *) (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_GPIO_BASE); unsigned char data = gpio->dta1; @@ -87,7 +87,7 @@ int checkcpu (void) int checkboard (void) { -#ifdef CFG_ADDRESS_MAP_A +#ifdef CONFIG_SYS_ADDRESS_MAP_A puts ("Board: ELTEC BAB7xx PReP\n"); #else puts ("Board: ELTEC BAB7xx CHRP\n"); @@ -126,16 +126,16 @@ long int dram_size (int board_type) register unsigned long i, msar1, mear1, memSize; -#if defined(CFG_MEMTEST) +#if defined(CONFIG_SYS_MEMTEST) register unsigned long reg; printf ("Testing DRAM\n"); /* write each mem addr with it's address */ - for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) + for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) *reg = reg; - for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) { + for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) { if (*reg != reg) return -1; } diff --git a/board/eltec/bab7xx/flash.c b/board/eltec/bab7xx/flash.c index 442dd0051..21ae09892 100644 --- a/board/eltec/bab7xx/flash.c +++ b/board/eltec/bab7xx/flash.c @@ -34,7 +34,7 @@ #include #include -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size (vu_long *addr, flash_info_t *info); static int write_word (flash_info_t *info, ulong dest, ulong data); @@ -55,7 +55,7 @@ unsigned long flash_init (void) int i; /* Init: no FLASHes known */ - for (i=0; istart[l_sect]); while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } @@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) start = get_timer (0); while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { return (1); } } diff --git a/board/eltec/bab7xx/l2cache.c b/board/eltec/bab7xx/l2cache.c index 1e7537745..787704f40 100644 --- a/board/eltec/bab7xx/l2cache.c +++ b/board/eltec/bab7xx/l2cache.c @@ -23,7 +23,7 @@ #include -#if defined(CFG_L2_BAB7xx) +#if defined(CONFIG_SYS_L2_BAB7xx) #include #include @@ -77,7 +77,7 @@ int l2_cache_enable (int l2control) pci_write_config_dword (devbusfn, PCI_PICR2, reg32); /* cache size */ - if (*(volatile unsigned char *) (CFG_ISA_IO + 0x220) & 0x04) + if (*(volatile unsigned char *) (CONFIG_SYS_ISA_IO + 0x220) & 0x04) { /* cache size is 512 KB */ picr2CacheSize = PICR2_L2_SIZE_512K; @@ -156,4 +156,4 @@ int l2_cache_enable (int l2control) /*----------------------------------------------------------------------------*/ -#endif /* (CFG_L2_BAB7xx) */ +#endif /* (CONFIG_SYS_L2_BAB7xx) */ diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c index 6a2480741..1c94a76d4 100644 --- a/board/eltec/bab7xx/misc.c +++ b/board/eltec/bab7xx/misc.c @@ -31,7 +31,7 @@ #include "srom.h" /* imports */ -extern char console_buffer[CFG_CBSIZE]; +extern char console_buffer[CONFIG_SYS_CBSIZE]; extern int l2_cache_enable (int l2control); extern void *nvram_read (void *dest, const short src, size_t count); extern void nvram_write (short dest, const void *src, size_t count); @@ -134,7 +134,7 @@ int misc_init_r (void) SECOND_DEVICE, FIRST_BLOCK); /* read out current nvram shadow image */ - nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE); + nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE); if (strcmp (eerev.magic, "ELTEC") != 0) { @@ -162,8 +162,8 @@ int misc_init_r (void) copyNv = 1; /* copy to nvram */ } - if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) != - el_srom_checksum((u_char*)buf, CFG_SROM_SIZE))) + if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CONFIG_SYS_SROM_SIZE) != + el_srom_checksum((u_char*)buf, CONFIG_SYS_SROM_SIZE))) { printf ("Invalid revision info copy in nvram !\n"); printf ("Press key:\n to copy current revision info to nvram.\n"); @@ -304,13 +304,13 @@ int misc_init_r (void) printf("OK\n\n"); /* write new values as shadow image to nvram */ - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); + nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE); } /*if (initSrom) */ /* copy current values as shadow image to nvram */ if (initSrom == 0 && copyNv == 1) - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); + nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE); /* update environment */ sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x", @@ -333,7 +333,7 @@ int misc_init_r (void) /* * L2 cache configuration */ -#if defined(CFG_L2_BAB7xx) +#if defined(CONFIG_SYS_L2_BAB7xx) ptr = getenv("l2cache"); if (*ptr == '0') { diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c index edbd3ddf7..46e5a8bb1 100644 --- a/board/eltec/bab7xx/pci.c +++ b/board/eltec/bab7xx/pci.c @@ -43,41 +43,41 @@ void pci_init_board(void) hose->last_busno = 0xff; pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, /* * Attention: pci_hose_phys_to_bus() failes in address compare, - * so we need (CFG_PCI_MEMORY_SIZE-1) + * so we need (CONFIG_SYS_PCI_MEMORY_SIZE-1) */ - CFG_PCI_MEMORY_SIZE-1, + CONFIG_SYS_PCI_MEMORY_SIZE-1, PCI_REGION_MEM | PCI_REGION_MEMORY); /* PCI memory space */ pci_set_region(hose->regions + 1, - CFG_PCI_MEM_BUS, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, + CONFIG_SYS_PCI_MEM_BUS, + CONFIG_SYS_PCI_MEM_PHYS, + CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM); /* ISA/PCI memory space */ pci_set_region(hose->regions + 2, - CFG_ISA_MEM_BUS, - CFG_ISA_MEM_PHYS, - CFG_ISA_MEM_SIZE, + CONFIG_SYS_ISA_MEM_BUS, + CONFIG_SYS_ISA_MEM_PHYS, + CONFIG_SYS_ISA_MEM_SIZE, PCI_REGION_MEM); /* PCI I/O space */ pci_set_region(hose->regions + 3, - CFG_PCI_IO_BUS, - CFG_PCI_IO_PHYS, - CFG_PCI_IO_SIZE, + CONFIG_SYS_PCI_IO_BUS, + CONFIG_SYS_PCI_IO_PHYS, + CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); /* ISA/PCI I/O space */ pci_set_region(hose->regions + 4, - CFG_ISA_IO_BUS, - CFG_ISA_IO_PHYS, - CFG_ISA_IO_SIZE, + CONFIG_SYS_ISA_IO_BUS, + CONFIG_SYS_ISA_IO_PHYS, + CONFIG_SYS_ISA_IO_SIZE, PCI_REGION_IO); hose->region_count = 5; diff --git a/board/eltec/bab7xx/srom.h b/board/eltec/bab7xx/srom.h index c18ab9164..504b742a6 100644 --- a/board/eltec/bab7xx/srom.h +++ b/board/eltec/bab7xx/srom.h @@ -40,8 +40,8 @@ #define SROM_SHORT(pX) (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8) /* bab7xx ELTEC srom */ -#define I2C_BUS_DAT (CFG_ISA_IO + 0x220) -#define I2C_BUS_DIR (CFG_ISA_IO + 0x221) +#define I2C_BUS_DAT (CONFIG_SYS_ISA_IO + 0x220) +#define I2C_BUS_DIR (CONFIG_SYS_ISA_IO + 0x221) /* srom at mpc107 */ #define MPC107_I2CADDR (mpc107_eumb_addr + 0x3000) /* address */ diff --git a/board/eltec/elppc/asm_init.S b/board/eltec/elppc/asm_init.S index 1b8d399ed..8cbe9d88e 100644 --- a/board/eltec/elppc/asm_init.S +++ b/board/eltec/elppc/asm_init.S @@ -272,15 +272,15 @@ memStartWait: * set LEDs first time */ li r3, 0x1 - lis r30, CFG_USR_LED_BASE@h + lis r30, CONFIG_SYS_USR_LED_BASE@h stb r3, 2(r30) sync /* * init COM1 for polled output */ - lis r8, CFG_NS16550_COM1@h /* COM1 base address*/ - ori r8, r8, CFG_NS16550_COM1@l + lis r8, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/ + ori r8, r8, CONFIG_SYS_NS16550_COM1@l li r9, 0x00 stb r9, 1(r8) /* int disabled */ eieio @@ -290,10 +290,10 @@ memStartWait: li r9, 0x80 stb r9, 3(r8) /* link ctrl */ eieio - li r9, (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE) + li r9, (CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE) stb r9, 0(r8) /* baud rate (LSB)*/ eieio - li r9, ((CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8) + li r9, ((CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8) stb r9, 1(r8) /* baud rate (MSB) */ eieio li r9, 0x07 @@ -589,7 +589,7 @@ memStartWait_1: * set LEDs end */ li r3, 0xf - lis r30, CFG_USR_LED_BASE@h + lis r30, CONFIG_SYS_USR_LED_BASE@h stb r3, 2(r30) sync @@ -602,8 +602,8 @@ memStartWait_1: */ Printf: - lis r10, CFG_NS16550_COM1@h /* COM1 base address*/ - ori r10, r10, CFG_NS16550_COM1@l + lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/ + ori r10, r10, CONFIG_SYS_NS16550_COM1@l WaitChr: lbz r0, 5(r10) /* read link status */ eieio @@ -622,8 +622,8 @@ WaitChr: * print a char to COM1 in polling mode (r10=COM1 port, r3=char) */ OutChr: - lis r10, CFG_NS16550_COM1@h /* COM1 base address*/ - ori r10, r10, CFG_NS16550_COM1@l + lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/ + ori r10, r10, CONFIG_SYS_NS16550_COM1@l OutChr1: lbz r0, 5(r10) /* read link status */ eieio @@ -645,8 +645,8 @@ OutHex4: OutHex: li r9, 28 /* shift reg for 8 digits */ OHstart: - lis r10, CFG_NS16550_COM1@h /* COM1 base address*/ - ori r10, r10, CFG_NS16550_COM1@l + lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/ + ori r10, r10, CONFIG_SYS_NS16550_COM1@l OutDig: lbz r0, 0(r29) /* slow down dummy read */ lbz r0, 5(r10) /* read link status */ @@ -685,8 +685,8 @@ OutDec: divwu r0, r3, r6 /* r0 = r3 / 10, r7 = r3 mod 10 */ mullw r10, r0, r6 subf r7, r10, r3 - lis r10, CFG_NS16550_COM1@h /* COM1 base address*/ - ori r10, r10, CFG_NS16550_COM1@l + lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/ + ori r10, r10, CONFIG_SYS_NS16550_COM1@l or. r7, r7, r7 bne noblank1 li r3, 0x20 diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c index d3ac2784a..e73c712cb 100644 --- a/board/eltec/elppc/elppc.c +++ b/board/eltec/elppc/elppc.c @@ -68,16 +68,16 @@ long int dram_size (int board_type) register unsigned long i, msar1, mear1, memSize; -#if defined(CFG_MEMTEST) +#if defined(CONFIG_SYS_MEMTEST) register unsigned long reg; printf ("Testing DRAM\n"); /* write each mem addr with it's address */ - for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) + for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) *reg = reg; - for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) { + for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) { if (*reg != reg) return -1; } diff --git a/board/eltec/elppc/flash.c b/board/eltec/elppc/flash.c index 442dd0051..21ae09892 100644 --- a/board/eltec/elppc/flash.c +++ b/board/eltec/elppc/flash.c @@ -34,7 +34,7 @@ #include #include -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size (vu_long *addr, flash_info_t *info); static int write_word (flash_info_t *info, ulong dest, ulong data); @@ -55,7 +55,7 @@ unsigned long flash_init (void) int i; /* Init: no FLASHes known */ - for (i=0; istart[l_sect]); while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } @@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) start = get_timer (0); while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { return (1); } } diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c index 5e3a81c6e..cbaf10b7e 100644 --- a/board/eltec/elppc/misc.c +++ b/board/eltec/elppc/misc.c @@ -29,7 +29,7 @@ #include "srom.h" /* imports */ -extern char console_buffer[CFG_CBSIZE]; +extern char console_buffer[CONFIG_SYS_CBSIZE]; extern int l2_cache_enable (int l2control); extern int eepro100_write_eeprom (struct eth_device *dev, int location, int addr_len, unsigned short data); @@ -95,7 +95,7 @@ int misc_init_r (void) SECOND_DEVICE, FIRST_BLOCK); /* read out current nvram shadow image */ - nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE); + nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE); if (strcmp (eerev.magic, "ELTEC") != 0) { /* srom is not initialized -> create a default revision info */ @@ -124,8 +124,8 @@ int misc_init_r (void) } if ((copyNv == 0) - && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) != - el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) { + && (el_srom_checksum ((u_char *) & eerev, CONFIG_SYS_SROM_SIZE) != + el_srom_checksum ((u_char *) buf, CONFIG_SYS_SROM_SIZE))) { printf ("Invalid revision info copy in nvram !\n"); printf ("Press key:\n to copy current revision info to nvram.\n"); printf (" to reenter revision info.\n"); @@ -232,16 +232,16 @@ int misc_init_r (void) printf ("OK\n\n"); /* write new values as shadow image to nvram */ - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev, - CFG_SROM_SIZE); + nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev, + CONFIG_SYS_SROM_SIZE); } /*if (initSrom) */ /* copy current values as shadow image to nvram */ if (initSrom == 0 && copyNv == 1) - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev, - CFG_SROM_SIZE); + nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev, + CONFIG_SYS_SROM_SIZE); /* update environment */ sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x", diff --git a/board/eltec/elppc/pci.c b/board/eltec/elppc/pci.c index 5b115ea61..bf133b77d 100644 --- a/board/eltec/elppc/pci.c +++ b/board/eltec/elppc/pci.c @@ -42,37 +42,37 @@ void pci_init_board(void) hose->last_busno = 0xff; pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); /* PCI memory space */ pci_set_region(hose->regions + 1, - CFG_PCI_MEM_BUS, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, + CONFIG_SYS_PCI_MEM_BUS, + CONFIG_SYS_PCI_MEM_PHYS, + CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM); /* ISA/PCI memory space */ pci_set_region(hose->regions + 2, - CFG_ISA_MEM_BUS, - CFG_ISA_MEM_PHYS, - CFG_ISA_MEM_SIZE, + CONFIG_SYS_ISA_MEM_BUS, + CONFIG_SYS_ISA_MEM_PHYS, + CONFIG_SYS_ISA_MEM_SIZE, PCI_REGION_MEM); /* PCI I/O space */ pci_set_region(hose->regions + 3, - CFG_PCI_IO_BUS, - CFG_PCI_IO_PHYS, - CFG_PCI_IO_SIZE, + CONFIG_SYS_PCI_IO_BUS, + CONFIG_SYS_PCI_IO_PHYS, + CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); /* ISA/PCI I/O space */ pci_set_region(hose->regions + 4, - CFG_ISA_IO_BUS, - CFG_ISA_IO_PHYS, - CFG_ISA_IO_SIZE, + CONFIG_SYS_ISA_IO_BUS, + CONFIG_SYS_ISA_IO_PHYS, + CONFIG_SYS_ISA_IO_SIZE, PCI_REGION_IO); hose->region_count = 5; diff --git a/board/eltec/elppc/srom.h b/board/eltec/elppc/srom.h index c18ab9164..504b742a6 100644 --- a/board/eltec/elppc/srom.h +++ b/board/eltec/elppc/srom.h @@ -40,8 +40,8 @@ #define SROM_SHORT(pX) (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8) /* bab7xx ELTEC srom */ -#define I2C_BUS_DAT (CFG_ISA_IO + 0x220) -#define I2C_BUS_DIR (CFG_ISA_IO + 0x221) +#define I2C_BUS_DAT (CONFIG_SYS_ISA_IO + 0x220) +#define I2C_BUS_DIR (CONFIG_SYS_ISA_IO + 0x221) /* srom at mpc107 */ #define MPC107_I2CADDR (mpc107_eumb_addr + 0x3000) /* address */ diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c index 4cc66a973..2fbdb2771 100644 --- a/board/eltec/mhpc/flash.c +++ b/board/eltec/mhpc/flash.c @@ -25,7 +25,7 @@ #include #include -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Protection Flags: @@ -62,13 +62,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info); unsigned long flash_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long size_b0; int i; /* Init: no FLASHes known */ - for (i=0; imemc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V; + memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); + memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V; /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]); + size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); + flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); /* monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE+monitor_flash_len-1, + CONFIG_SYS_FLASH_BASE, + CONFIG_SYS_FLASH_BASE+monitor_flash_len-1, &flash_info[0]); flash_info[0].size = size_b0; @@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) break; } - if (info->sector_count > CFG_MAX_FLASH_SECT) { + if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; + info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; } addr[0] = (FPW)0xFF00FF00; /* restore read mode */ @@ -277,7 +277,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) udelay (1000); while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) { - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW)0xB000B000; /* suspend erase */ *addr = (FPW)0xFF00FF00; /* reset to read mode */ @@ -419,7 +419,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) start = get_timer (0); while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW)0xFF00FF00; /* restore read mode */ return (1); } diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c index 3666791e9..7cca6b28c 100644 --- a/board/eltec/mhpc/mhpc.c +++ b/board/eltec/mhpc/mhpc.c @@ -36,7 +36,7 @@ #include /* imports from common/main.c */ -extern char console_buffer[CFG_CBSIZE]; +extern char console_buffer[CONFIG_SYS_CBSIZE]; extern void eeprom_init (void); extern int eeprom_read (unsigned dev_addr, unsigned offset, @@ -105,7 +105,7 @@ static const unsigned int sdram_table[] = { int board_early_init_f (void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile cpm8xx_t *cp = &(im->im_cpm); volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport); @@ -160,7 +160,7 @@ int misc_init_r (void) int i; /* check revision data */ - eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32); + eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32); if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) { printf ("Enter revision number (0-9): %c ", @@ -228,7 +228,7 @@ int misc_init_r (void) } /* setup new revision data */ - eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, + eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32); } @@ -253,13 +253,13 @@ int misc_init_r (void) phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; upmconfig (UPMA, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */ memctl->memc_mptpr = MPTPR_PTP_DIV64; memctl->memc_mar = 0x00008800; @@ -267,15 +267,15 @@ phys_size_t initdram (int board_type) /* * Map controller SDRAM bank 0 */ - memctl->memc_or1 = CFG_OR1_PRELIM; - memctl->memc_br1 = CFG_BR1_PRELIM; + memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; + memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; udelay (200); /* * Map controller SDRAM bank 1 */ - memctl->memc_or2 = CFG_OR2; - memctl->memc_br2 = CFG_BR2; + memctl->memc_or2 = CONFIG_SYS_OR2; + memctl->memc_br2 = CONFIG_SYS_BR2; /* * Perform SDRAM initializsation sequence @@ -419,7 +419,7 @@ void *video_hw_init (void) { unsigned int clut = 0; unsigned char *penv; - immap_t *immr = (immap_t *) CFG_IMMR; + immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* enable video only on CLUT value */ if ((penv = (uchar *)getenv ("clut")) != NULL) @@ -470,7 +470,7 @@ void video_set_lut (unsigned int index, unsigned char r, unsigned char g, unsigned char b) { unsigned int lum; - unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00); + unsigned short *pLut = (unsigned short *) (CONFIG_SYS_IMMR + 0x0e00); /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */ /* y = 0.299*R + 0.587*G + 0.114*B */ -- cgit v1.2.3