From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/korat/config.mk | 2 +- board/korat/init.S | 22 ++++++------ board/korat/korat.c | 92 +++++++++++++++++++++++++------------------------- board/korat/u-boot.lds | 2 +- 4 files changed, 59 insertions(+), 59 deletions(-) (limited to 'board/korat') diff --git a/board/korat/config.mk b/board/korat/config.mk index fa8374f17..73180dbd8 100644 --- a/board/korat/config.mk +++ b/board/korat/config.mk @@ -35,7 +35,7 @@ PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2 endif ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8CFF0000 +PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8CFF0000 endif ifeq ($(perm),1) diff --git a/board/korat/init.S b/board/korat/init.S index bf8b2c808..ea43a1f89 100644 --- a/board/korat/init.S +++ b/board/korat/init.S @@ -50,27 +50,27 @@ tlbtab: * generated dynamically in the SPD DDR2 detection routine. */ -#ifdef CFG_INIT_RAM_DCACHE +#ifdef CONFIG_SYS_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, + tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) #endif /* TLB-entry for PCI Memory */ - tlbentry( CFG_PCI_MEMBASE + 0x00000000, SZ_256M, - CFG_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x00000000, SZ_256M, + CONFIG_SYS_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE + 0x10000000, SZ_256M, - CFG_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x10000000, SZ_256M, + CONFIG_SYS_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE + 0x20000000, SZ_256M, - CFG_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x20000000, SZ_256M, + CONFIG_SYS_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE + 0x30000000, SZ_256M, - CFG_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x30000000, SZ_256M, + CONFIG_SYS_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for EBC */ - tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for Internal Registers & OCM */ /* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */ diff --git a/board/korat/korat.c b/board/korat/korat.c index 8787e231e..5ad75f74d 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR; -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size(ulong base, int banknum); @@ -46,11 +46,11 @@ ulong flash_get_size(ulong base, int banknum); void korat_buzzer(int const on) { if (on) { - out_8((u8 *) CFG_CPLD_BASE + 0x05, - in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80); + out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05, + in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) | 0x80); } else { - out_8((u8 *) CFG_CPLD_BASE + 0x05, - in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80); + out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05, + in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) & ~0x80); } } #endif @@ -66,16 +66,16 @@ int board_early_init_f(void) extern void korat_branch_absolute(uint32_t addr); - for (mscount = 0; mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) { + for (mscount = 0; mscount < CONFIG_SYS_KORAT_MAN_RESET_MS; ++mscount) { udelay(1000); - if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) { + if (gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) { /* This call does not return. */ korat_branch_absolute( - CFG_FLASH1_TOP - 2 * CONFIG_ENV_SECT_SIZE - 4); + CONFIG_SYS_FLASH1_TOP - 2 * CONFIG_ENV_SECT_SIZE - 4); } } korat_buzzer(1); - while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) + while (!gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) udelay(1000); korat_buzzer(0); @@ -115,33 +115,33 @@ int board_early_init_f(void) * Take sim card reader and CF controller out of reset. Also enable PHY * auto-detect until board-specific PHY resets are available. */ - out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0); + out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02, 0xC0); /* Configure the two Ethernet PHYs. For each PHY, configure for fiber * if the SFP module is present, and for copper if it is not present. */ for (eth = 0; eth < 2; ++eth) { - if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) { + if (gpio_read_in_bit(CONFIG_SYS_GPIO_SFP0_PRESENT_ + eth)) { /* SFP module not present: configure PHY for copper. */ /* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */ - out_8((u8 *) CFG_CPLD_BASE + 0x03, - in_8((u8 *) CFG_CPLD_BASE + 0x03) | + out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03, + in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | 0x06 << (4 * eth)); } else { /* SFP module present: configure PHY for fiber and enable output */ - gpio_write_bit(CFG_GPIO_PHY0_FIBER_SEL + eth, 1); - gpio_write_bit(CFG_GPIO_SFP0_TX_EN_ + eth, 0); + gpio_write_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL + eth, 1); + gpio_write_bit(CONFIG_SYS_GPIO_SFP0_TX_EN_ + eth, 0); } } /* enable Ethernet: set GPIO45 and GPIO46 to 1 */ - gpio_write_bit(CFG_GPIO_PHY0_EN, 1); - gpio_write_bit(CFG_GPIO_PHY1_EN, 1); + gpio_write_bit(CONFIG_SYS_GPIO_PHY0_EN, 1); + gpio_write_bit(CONFIG_SYS_GPIO_PHY1_EN, 1); /* Wait 1 ms, then enable Fiber signal detect to PHYs. */ udelay(1000); - out_8((u8 *) CFG_CPLD_BASE + 0x03, - in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88); + out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03, + in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | 0x88); /* select Ethernet (and optionally IIC1) pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); @@ -176,8 +176,8 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) if (1 != banknum) return 0; - info->size = CFG_FLASH0_SIZE; - info->sector_count = CFG_FLASH0_SIZE / 0x20000; + info->size = CONFIG_SYS_FLASH0_SIZE; + info->sector_count = CONFIG_SYS_FLASH0_SIZE / 0x20000; info->flash_id = 0x01000000; info->portwidth = 2; info->chipwidth = 2; @@ -192,12 +192,12 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->manufacturer_id = 1; info->device_id = 0x007E; -#if CFG_FLASH0_SIZE == 0x01000000 +#if CONFIG_SYS_FLASH0_SIZE == 0x01000000 info->device_id2 = 0x2101; -#elif CFG_FLASH0_SIZE == 0x04000000 +#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000 info->device_id2 = 0x2301; #else -#error Unable to set device_id2 for current CFG_FLASH0_SIZE +#error Unable to set device_id2 for current CONFIG_SYS_FLASH0_SIZE #endif info->ext_addr = 0x0040; @@ -349,13 +349,13 @@ int misc_init_r(void) unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; - uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE; + uint32_t const flash1_size = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE; char const *const act = getenv("usbact"); /* * Re-do FLASH1 sizing and adjust flash start and offset. */ - gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size; + gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size; gd->bd->bi_flashoffset = 0; mtdcr(ebccfga, pb1cr); @@ -375,23 +375,23 @@ int misc_init_r(void) * environment */ gd->bd->bi_flashoffset = - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CFG_FLASH1_ADDR; + CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR; mtdcr(ebccfga, pb1cr); pbcr = mfdcr(ebccfgd); - size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21; + size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); mtdcr(ebccfga, pb1cr); mtdcr(ebccfgd, pbcr); /* Monitor protection ON by default */ #if defined(CONFIG_KORAT_PERMANENT) - (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, - CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, flash_info + 1); #else - (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, - CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, flash_info); #endif /* Env protection ON by default */ @@ -536,7 +536,7 @@ int misc_init_r(void) set_serial_number(); set_mac_addresses(); - gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1); + gpio_write_bit(CONFIG_SYS_GPIO_ATMEGA_RESET_, 1); return 0; } @@ -544,20 +544,20 @@ int misc_init_r(void) int checkboard(void) { char const *const s = getenv("serial#"); - u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0); + u8 const rev = in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0); printf("Board: Korat, Rev. %X", rev); if (s) printf(", serial# %s", s); printf(".\n Ethernet PHY 0: "); - if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL)) + if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL)) printf("fiber"); else printf("copper"); printf(", PHY 1: "); - if (gpio_read_out_bit(CFG_GPIO_PHY1_FIBER_SEL)) + if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY1_FIBER_SEL)) printf("fiber"); else printf("copper"); @@ -644,7 +644,7 @@ int pci_pre_init(struct pci_controller *hose) * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. */ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /* @@ -660,9 +660,9 @@ void pci_target_init(struct pci_controller *hose) */ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ out32r(PCIX0_PMM0PCILA, - CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ @@ -670,9 +670,9 @@ void pci_target_init(struct pci_controller *hose) out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ out32r(PCIX0_PMM1LA, - CFG_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ + CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ out32r(PCIX0_PMM1PCILA, - CFG_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ + CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ @@ -688,8 +688,8 @@ void pci_target_init(struct pci_controller *hose) /* Program the board's subsystem id/vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CFG_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); + CONFIG_SYS_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); /* Configure command register as bus master */ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); @@ -708,9 +708,9 @@ void pci_target_init(struct pci_controller *hose) */ pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; @@ -771,7 +771,7 @@ void ft_board_setup(void *blob, bd_t *bd) val[0] = 1; /* chip select number */ val[1] = 0; /* always 0 */ val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize - CFG_FLASH0_SIZE; + val[3] = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE; rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", val, sizeof(val), 1); if (rc) diff --git a/board/korat/u-boot.lds b/board/korat/u-boot.lds index b20fb1c0a..3cfec834e 100644 --- a/board/korat/u-boot.lds +++ b/board/korat/u-boot.lds @@ -137,7 +137,7 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); _end = . ; PROVIDE (end = .); -- cgit v1.2.3