From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/total5200/sdram.c | 28 ++++++++++++++-------------- board/total5200/total5200.c | 8 ++++---- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'board/total5200') diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c index a1601f274..dc4c6f18c 100644 --- a/board/total5200/sdram.c +++ b/board/total5200/sdram.c @@ -29,7 +29,7 @@ #include "sdram.h" -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr) { long hi_addr_bit = hi_addr ? 0x01000000 : 0; @@ -72,7 +72,7 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr) /* * ATTENTION: Although partially referenced initdram does NOT make real use - * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ @@ -81,7 +81,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) { ulong dramsize = 0; ulong dramsize2 = 0; -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT ulong test1, test2; /* setup SDRAM chip selects */ @@ -102,9 +102,9 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) /* find RAM size using SDRAM CS0 only */ mpc5xxx_sdram_start(sdram_conf, 0); - test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); mpc5xxx_sdram_start(sdram_conf, 1); - test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); if (test1 > test2) { mpc5xxx_sdram_start(sdram_conf, 0); dramsize = test1; @@ -129,9 +129,9 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) /* find RAM size using SDRAM CS1 only */ mpc5xxx_sdram_start(sdram_conf, 0); - test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000); + test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); mpc5xxx_sdram_start(sdram_conf, 1); - test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000); + test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); if (test1 > test2) { mpc5xxx_sdram_start(sdram_conf, 0); dramsize2 = test1; @@ -152,7 +152,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ } -#else /* CFG_RAMBOOT */ +#else /* CONFIG_SYS_RAMBOOT */ /* retrieve size of memory connected to SDRAM CS0 */ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; @@ -170,7 +170,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) dramsize2 = 0; } -#endif /* CFG_RAMBOOT */ +#endif /* CONFIG_SYS_RAMBOOT */ return dramsize + dramsize2; } @@ -180,7 +180,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) { ulong dramsize = 0; -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT ulong test1, test2; /* setup and enable SDRAM chip selects */ @@ -199,9 +199,9 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) /* find RAM size */ mpc5xxx_sdram_start(sdram_conf, 0); - test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); mpc5xxx_sdram_start(sdram_conf, 1); - test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); if (test1 > test2) { mpc5xxx_sdram_start(sdram_conf, 0); dramsize = test1; @@ -212,12 +212,12 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) /* set SDRAM end address according to size */ *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); -#else /* CFG_RAMBOOT */ +#else /* CONFIG_SYS_RAMBOOT */ /* Retrieve amount of SDRAM available */ dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); -#endif /* CFG_RAMBOOT */ +#endif /* CONFIG_SYS_RAMBOOT */ return dramsize; } diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index ec00a67df..c524d63f9 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -71,15 +71,15 @@ int checkboard (void) /* * Retrieve FPGA Revision. */ - printf ("(FPGA %08lX)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400)); + printf ("(FPGA %08lX)\n", *(vu_long *) (CONFIG_SYS_FPGA_BASE + 0x400)); /* * Take all peripherals in power-up mode. */ #if CONFIG_TOTAL5200_REV==2 - *(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70; + *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x46) = 0x70; #else - *(vu_long *) (CFG_CPLD_BASE + 0x400) = 0x70; + *(vu_long *) (CONFIG_SYS_CPLD_BASE + 0x400) = 0x70; #endif return 0; @@ -284,7 +284,7 @@ void video_get_info_str (int line_number, char *info) /* Returns SED13806 base address. First thing called in the driver. */ unsigned int board_video_init (void) { - return CFG_LCD_BASE; + return CONFIG_SYS_LCD_BASE; } /* Called after initializing the SED13806 and before clearing the screen. */ -- cgit v1.2.3