From 3e38691e8f7aa0d9b498d76c7279ddec6e4946f3 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 5 Apr 2003 00:53:31 +0000 Subject: * Patch by Arun Dharankar, 4 Apr 2003: Add IDMA example code (tested on 8260 only) * Add support for Purple Board (MIPS64 5Kc) * Add support for MIPS64 5Kc CPUs * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS * Patch by Denis Peter, 04 Apr 2003: - update MIP405-4 board * Patches by Denis Peter, 03 April 2003: - fix PCI IRQs on MPL boards - fix two more un-relocated pointer problems * Fix behaviour of "run" command: - print error message iv variable does not exist - terminate processing of arguments in case of error * Patches by Peter Figuli, 10 Mar 2003 - Add support for BTUART on PXA platform - Add support for WEP EP250 (PXA) board * Fix flash problems on INCA-IP; add tool to allow bruning images to flash using a BDI2000 * Implement fix for I2C Edge Conditions problem for all boards that use the bit-banging driver (common/soft_i2c.c) * Add patches by Robert Schwebel, 31 Mar 2003: - csb226 board: bring in sync with innokom/memsetup.S - csb226 board: fix MDREFR handling - misc doc fixes / extensions - innokom board: cleanup, MDREFR fix in memsetup.S, config update - add BOOT_PROGRESS to armlinux.c --- doc/README.idma2intr | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 doc/README.idma2intr (limited to 'doc/README.idma2intr') diff --git a/doc/README.idma2intr b/doc/README.idma2intr new file mode 100644 index 000000000..1828b5130 --- /dev/null +++ b/doc/README.idma2intr @@ -0,0 +1,10 @@ +(C) 2003 Arun Dharankar + +Attached is an IDMA example code for MPC8260/PPCBoot. I had tried to +search around and could not find any for implementing IDMA, so +implemented one. Its not coded in the best way, but works. + +Also, I was able to test the IDMA specific code under Linux also +(with modifications). My requirement was to implement it for +CompactFlash implemented in memory mode, and it works for it under +PPCBoot and Linux. -- cgit v1.2.3