From 4946775c6db52dba28f72ba3525764b54f1d4593 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 28 Oct 2009 00:49:47 +0100 Subject: Coding Style cleanup; update CHANGELOG, prepare -rc1 Signed-off-by: Wolfgang Denk --- doc/README.bitbangMII | 18 +++++++++--------- doc/README.drivers.eth | 2 +- doc/README.kwbimage | 4 ++-- 3 files changed, 12 insertions(+), 12 deletions(-) (limited to 'doc') diff --git a/doc/README.bitbangMII b/doc/README.bitbangMII index edd085630..0a2fa48a5 100644 --- a/doc/README.bitbangMII +++ b/doc/README.bitbangMII @@ -6,7 +6,7 @@ buses are implemented via bit-banging mode. The driver requires that the following macros should be defined into the board configuration file: -CONFIG_BITBANGMII - Enable the miiphybb driver +CONFIG_BITBANGMII - Enable the miiphybb driver CONFIG_BITBANGMII_MULTI - Enable the multi bus support If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs @@ -19,7 +19,7 @@ MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin MDIO_READ - Read the MDIO pin MDIO(v) - Write v on the MDIO pin MDC_DECLARE - Declaration needed to access to the MDC pin (optional) -MDC(v) - Write v on the MDC pin +MDC(v) - Write v on the MDC pin The previous macros make the driver compatible with the previous version (that didn't support the multi-bus). @@ -30,17 +30,17 @@ the bb_miiphy_buses_num variable with the number of mii buses. The record (struct bb_miiphy_bus) has the following fields/callbacks (see miiphy.h for details): -char name[] - The symbolic name that must be equal to the MII bus - registered name -int (*init)() - Initialization function called at startup time (just - before the Ethernet initialization) +char name[] - The symbolic name that must be equal to the MII bus + registered name +int (*init)() - Initialization function called at startup time (just + before the Ethernet initialization) int (*mdio_active)() - Activate the MDIO pin as output int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin int (*set_mdio)() - Write the MDIO pin int (*get_mdio)() - Read the MDIO pin int (*set_mdc)() - Write the MDC pin -int (*delay)() - Delay function -void *priv - Private data used by board specific code +int (*delay)() - Delay function +void *priv - Private data used by board specific code The board code will look like: @@ -50,7 +50,7 @@ struct bb_miiphy_bus bb_miiphy_buses[] = { ... }; int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / - sizeof(bb_miiphy_buses[0]); + sizeof(bb_miiphy_buses[0]); 2009 Industrie Dial Face S.p.A. Luigi 'Comio' Mantellini diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth index e06d3ad44..e73e462c8 100644 --- a/doc/README.drivers.eth +++ b/doc/README.drivers.eth @@ -88,7 +88,7 @@ The return value for this function should be as follows: < 0 - failure (hardware failure, not probe failure) >=0 - number of interfaces detected -You might notice that many drivers seem to use xxx_initialize() rather than +You might notice that many drivers seem to use xxx_initialize() rather than xxx_register(). This is the old naming convention and should be avoided as it causes confusion with the driver-specific init function. diff --git a/doc/README.kwbimage b/doc/README.kwbimage index 2a5b3b3be..6dd942f10 100644 --- a/doc/README.kwbimage +++ b/doc/README.kwbimage @@ -17,12 +17,12 @@ Command syntax: to list the kwb image file details ./tools/mkimage -n \ - -T kwbimage -a -e \ + -T kwbimage -a -e \ -d for ex. ./tools/mkimage -n ./board/Marvell/openrd_base/kwbimage.cfg \ - -T kwbimage -a 0x00600000 -e 0x00600000 \ + -T kwbimage -a 0x00600000 -e 0x00600000 \ -d u-boot.bin u-boot.kwb kwimage support available with mkimage utility will generate kirkwood boot -- cgit v1.2.3