From c31e13260bcd048a94412a47b004386ea6112acf Mon Sep 17 00:00:00 2001 From: Valeriy Glushkov Date: Tue, 30 Jun 2009 15:48:41 +0300 Subject: usb: mpx8349itx: added support of loading images from USB storage (MPH/DR) Signed-off-by: Valeriy Glushkov Signed-off-by: Kim Phillips --- include/configs/MPC8349ITX.h | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'include/configs/MPC8349ITX.h') diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index d4d3256f7..9183d7794 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -79,6 +79,7 @@ #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ +#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif #define CONFIG_PCI @@ -155,6 +156,25 @@ #endif +#ifdef CONFIG_SYS_USB_HOST +/* + * Support USB + */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL + +/* Current USB implementation supports the only USB controller, + * so we have to choose between the MPH or the DR ones */ +#if 1 +#define CONFIG_HAS_FSL_MPH_USB +#else +#define CONFIG_HAS_FSL_DR_USB +#endif + +#endif + /* * DDR Setup */ @@ -456,9 +476,11 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM -#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) +#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ + || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT + #define CONFIG_SUPPORT_VFAT #endif #ifdef CONFIG_COMPACT_FLASH @@ -467,6 +489,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #ifdef CONFIG_SATA_SIL3114 #define CONFIG_CMD_SATA +#endif + +#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) #define CONFIG_CMD_EXT2 #endif @@ -560,12 +585,14 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ +#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ +#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ /* * System IO Config */ #define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ -#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) +#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */ #define CONFIG_SYS_HID0_INIT 0x000000000 #define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT -- cgit v1.2.3