From 7205e4075d8b50e4dd89fe39ed03860b23cbb704 Mon Sep 17 00:00:00 2001
From: wdenk <wdenk>
Date: Wed, 10 Sep 2003 22:30:53 +0000
Subject: * Patches by Denis Peter, 9 Sep 2003:   add FAT support for IDE, SCSI
 and USB

* Patches by Gleb Natapov, 2 Sep 2003:
  - cleanup of POST code for unsupported architectures
  - MPC824x locks way0 of data cache for use as initial RAM;
    this patch unlocks it after relocation to RAM and invalidates
    the locked entries.

* Patch by Gleb Natapov, 30 Aug 2003:
  new I2C driver for mpc107 bridge. Now works from flash.

* Patch by Dave Ellis, 11 Aug 2003:
  - JFFS2: fix typo in common/cmd_jffs2.c
  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  - JFFS2: remove node version 0 warning
  - JFFS2: accept JFFS2 PADDING nodes
  - SXNI855T: add AM29LV800 support
  - SXNI855T: move environment from EEPROM to flash
  - SXNI855T: boot from JFFS2 in NOR or NAND flash

* Patch by Bill Hargen, 11 Aug 2003:
  fixes for I2C on MPC8240
  - fix i2c_write routine
  - fix iprobe command
  - eliminates use of global variables, plus dead code, cleanup.
---
 include/configs/PIP405.h | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'include/configs/PIP405.h')

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index d9f8be8ee..b9107ccf7 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -50,11 +50,13 @@
 			CFG_CMD_PCI	| \
 			CFG_CMD_CACHE	| \
 			CFG_CMD_IRQ	| \
+			CFG_CMD_ECHO	| \
 			CFG_CMD_EEPROM	| \
 			CFG_CMD_I2C	| \
 			CFG_CMD_REGINFO | \
 			CFG_CMD_FDC	| \
 			CFG_CMD_SCSI	| \
+			CFG_CMD_FAT 	| \
 			CFG_CMD_DATE	| \
 			CFG_CMD_ELF	| \
 			CFG_CMD_USB	| \
@@ -141,7 +143,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-
+#define CONFIG_MISC_INIT_R
 /***********************************************************
  * Miscellaneous configurable options
  **********************************************************/
@@ -231,9 +233,12 @@
 /*
  * Init Memory Controller:
  */
+#define FLASH_MAX_SIZE		0x00800000		/* 8MByte max */
+#define FLASH_BASE_PRELIM	0xFF800000  /* open the flash CS */
+/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
+#define FLASH_SIZE_PRELIM	 3  /* maximal flash FLASH size bank #0	*/
 
-#define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
+#define CONFIG_BOARD_PRE_INIT
 
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR	0xF4000000
@@ -299,6 +304,7 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET		/* reset for ide supported...	*/
 #define CONFIG_IDE_RESET_ROUTINE	/* with a special reset function */
+#define CONFIG_SUPPORT_VFAT
 
 /************************************************************
  * ATAPI support (experimental)
-- 
cgit v1.2.3