From 9dd611b8c1db94181918481d5cac1fac241a7954 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 9 Jan 2005 17:19:34 +0000 Subject: * Patch by Kurt Stremerch, 03 Sep 2004: Add Xilinx Spartan2E family FPGA support * Patch by Jeff Angielski, 02 Sep 2004: Add Added support for H2 revision of the EP8260 board. Fixed formatting for some of the EP8260 related source files. --- include/configs/ep8260.h | 103 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 75 insertions(+), 28 deletions(-) (limited to 'include/configs/ep8260.h') diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 1f9de350c..f14442df2 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -26,17 +26,28 @@ /* * board/config.h - configuration options, board specific - * - * Note: my board is a "SBC 8260 H, V.1.1" + * + * "EP8260 H, V.1.1" * - 64M 60x Bus SDRAM * - 32M Local Bus SDRAM * - 16M Flash (4 x AM29DL323DB90WDI) * - 128k NVRAM with RTC + * + * "EP8260 H2, V.1.3" (CFG_EP8260_H2) + * - 300MHz/133MHz/66MHz + * - 64M 60x Bus SDRAM + * - 32M Local Bus SDRAM + * - 32M Flash + * - 128k NVRAM with RTC */ #ifndef __CONFIG_H #define __CONFIG_H +/* Define this to enable support the EP8260 H2 version */ +#define CFG_EP8260_H2 1 +/* #undef CFG_EP8260_H2 */ + /* What is the oscillator's (UX2) frequency in Hz? */ #define CONFIG_8260_CLKIN (66 * 1000 * 1000) @@ -62,7 +73,11 @@ * 0x6 0x1 66 133 266 * 0x6 0x2 66 133 300 */ -#define CFG_SBC_MODCK_H 0x05 +#ifdef CFG_EP8260_H2 +#define CFG_SBC_MODCK_H (HRCW_MODCK_H0110) +#else +#define CFG_SBC_MODCK_H (HRCW_MODCK_H0110) +#endif /* Define this if you want to boot from 0x00000100. If you don't define * this, you will need to program the bootloader to 0xfff00000, and @@ -84,8 +99,13 @@ * The main FLASH is whichever is connected to *CS0. U-Boot expects * this to be the SIMM. */ +#ifdef CFG_EP8260_H2 +#define CFG_FLASH0_BASE 0xFE000000 +#define CFG_FLASH0_SIZE 32 +#else #define CFG_FLASH0_BASE 0xFF000000 -#define CFG_FLASH0_SIZE 16 +#define CFG_FLASH0_SIZE 16 +#endif /* What should the base address of the secondary FLASH be and how big * is it (in Mbytes)? The secondary FLASH is whichever is connected @@ -107,7 +127,7 @@ * local bus (8260 local bus is NOT cacheable!) */ /* #define CFG_LSDRAM */ -#undef CFG_LSDRAM +#undef CFG_LSDRAM #ifdef CFG_LSDRAM /* What should be the base address of SDRAM DIMM (local bus) and how big is @@ -125,7 +145,7 @@ /* What should be the base address of NVRAM and how big is * it (in Bytes) */ -#define CFG_NVRAM_BASE_ADDR 0xFa080000 +#define CFG_NVRAM_BASE_ADDR 0xFA080000 #define CFG_NVRAM_SIZE (128*1024)-16 /* The RTC is a Dallas DS1556 @@ -237,8 +257,11 @@ #define CONFIG_ENV_OVERWRITE /* What should the console's baud rate be? */ -/* #define CONFIG_BAUDRATE 57600 */ -#define CONFIG_BAUDRATE 115200 +#ifdef CFG_EP8260_H2 +#define CONFIG_BAUDRATE 9600 +#else +#define CONFIG_BAUDRATE 115200 +#endif /* Ethernet MAC address */ #define CONFIG_ETHADDR 00:10:EC:00:30:8C @@ -297,6 +320,7 @@ CFG_CMD_VFD | \ CFG_CMD_XIMG ) ) + /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 #define CFG_DEFAULT_IMMR 0x00010000 @@ -371,21 +395,22 @@ # define CFG_SBC_HRCW_BOOT_FLAGS (0x00000000) #endif /* defined(CFG_SBC_BOOT_LOW) */ -/* get the HRCW ISB field from CFG_IMMR */ -/* -#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\ - ((CFG_IMMR & 0x01000000) >> 7) |\ - ((CFG_IMMR & 0x00100000) >> 4) ) +#ifdef CFG_EP8260_H2 +/* get the HRCW ISB field from CFG_DEFAULT_IMMR */ +#define CFG_SBC_HRCW_IMMR ( ((CFG_DEFAULT_IMMR & 0x10000000) >> 10) |\ + ((CFG_DEFAULT_IMMR & 0x01000000) >> 7) |\ + ((CFG_DEFAULT_IMMR & 0x00100000) >> 4) ) #define CFG_HRCW_MASTER (HRCW_EBM |\ HRCW_L2CPC01 |\ CFG_SBC_HRCW_IMMR |\ HRCW_APPC10 |\ HRCW_CS10PC01 |\ - HRCW_MODCK_H0101 |\ + CFG_SBC_MODCK_H |\ CFG_SBC_HRCW_BOOT_FLAGS) -*/ +#else #define CFG_HRCW_MASTER 0x10400245 +#endif /* no slaves */ #define CFG_HRCW_SLAVE1 0 @@ -432,7 +457,11 @@ * FLASH and environment organization */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#ifdef CFG_EP8260_H2 +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#else #define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ +#endif #define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ @@ -504,40 +533,48 @@ * BCR - Bus Configuration 4-25 *----------------------------------------------------------------------- */ -/*#define CFG_BCR (BCR_EBM |\ +#define CFG_BCR (BCR_EBM |\ BCR_PLDP |\ BCR_EAV |\ - BCR_NPQM1) -*/ -#define CFG_BCR 0x80C08000 + BCR_NPQM0) + /*----------------------------------------------------------------------- * SIUMCR - SIU Module Configuration 4-31 *----------------------------------------------------------------------- */ - #define CFG_SIUMCR (SIUMCR_L2CPC01 |\ SIUMCR_APPC10 |\ SIUMCR_CS10PC01) - /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 * SYPCR can only be written once after reset! *----------------------------------------------------------------------- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable */ +#ifdef CFG_EP8260_H2 +/* TBD: Find out why setting the BMT to 0xff causes the FCC to + * generate TX buffer underrun errors for large packets under + * Linux + */ +#define CFG_SYPCR_BMT 0x00000600 +#else +#define CFG_SYPCR_BMT SYPCR_BMT +#endif + #ifdef CFG_LSDRAM #define CFG_SYPCR (SYPCR_SWTC |\ - SYPCR_BMT |\ + CFG_SYPCR_BMT |\ SYPCR_PBME |\ SYPCR_LBME |\ SYPCR_SWP) #else #define CFG_SYPCR (SYPCR_SWTC |\ - SYPCR_BMT |\ + CFG_SYPCR_BMT |\ SYPCR_PBME |\ SYPCR_SWP) #endif + /*----------------------------------------------------------------------- * TMCNTSC - Time Counter Status and Control 4-40 *----------------------------------------------------------------------- @@ -555,10 +592,14 @@ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable * Periodic timer */ -/*#define CFG_PISCR (PISCR_PS |\ +#ifdef CFG_EP8260_H2 +#define CFG_PISCR (PISCR_PS |\ PISCR_PTF |\ - PISCR_PTE)*/ + PISCR_PTE) +#else #define CFG_PISCR 0 +#endif + /*----------------------------------------------------------------------- * SCCR - System Clock Control 9-8 *----------------------------------------------------------------------- @@ -616,7 +657,7 @@ #define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\ ORxG_CSNT |\ ORxG_ACS_DIV1 |\ - ORxG_SCY_6_CLK |\ + ORxG_SCY_8_CLK |\ ORxG_EHTR) /* Bank 1 - SDRAM @@ -632,9 +673,13 @@ ORxS_ROWST_PBI1_A6 |\ ORxS_NUMR_12) +#ifdef CFG_EP8260_H2 +#define CFG_PSDMR 0xC34E246E +#else #define CFG_PSDMR 0xC34E2462 -#define CFG_PSRT 0x64 +#endif +#define CFG_PSRT 0x64 #ifdef CFG_LSDRAM /* Bank 2 - SDRAM @@ -651,7 +696,7 @@ ORxS_ROWST_PBI0_A9 |\ ORxS_NUMR_12) - #define CFG_LSDMR 0x416A2562 + #define CFG_LSDMR 0x416A2562 #define CFG_LSRT 0x64 #else #define CFG_LSRT 0x0 @@ -673,6 +718,7 @@ */ #define CFG_OR4_PRELIM 0xfff00854 +#ifdef _NOT_USED_SINCE_NOT_WORKING_ /* Bank 8 - On board registers * PCMCIA (currently not working!) */ @@ -686,6 +732,7 @@ ORxG_ACS_DIV1 |\ ORxG_SETA |\ ORxG_SCY_10_CLK) +#endif /* * Internal Definitions -- cgit v1.2.3