From 1e8f4e78ca393b3d8e86bd8055758dd465d9113f Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 20 Nov 2008 09:59:09 +0100 Subject: powerpc, keymile boards: extract identical config options This patch extracts the identical config options for the keymile boards mgcoge, mgsuvd and kmeter1 in a new common config file keymile-common.h. Signed-off-by: Heiko Schocher --- include/configs/kmeter1.h | 81 ++--------------------------------------------- 1 file changed, 3 insertions(+), 78 deletions(-) (limited to 'include/configs/kmeter1.h') diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 7a63a4189..25b1c172e 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -29,6 +29,9 @@ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_KMETER1 1 /* KMETER1 board specific */ +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" + /* * System Clock Setup */ @@ -60,8 +63,6 @@ #define CONFIG_SYS_SICRH 0x00000006 #define CONFIG_SYS_SICRL 0x00000000 -#define CONFIG_BOARD_EARLY_INIT_R - /* * IMMR new address */ @@ -134,13 +135,6 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 -/* - * Memory test - */ -#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 - /* * The reserved memory */ @@ -249,9 +243,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,} - #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) @@ -269,7 +260,6 @@ #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif - /* * QE UEC ethernet configuration */ @@ -310,37 +300,6 @@ #define CONFIG_ENV_SIZE 0x2000 #endif /* CFG_RAMBOOT */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * How to get access to the slot ID. Put this here to make it easy - * to modify in a centralized location. This is used in the HDLC - * driver to set the MAC. -*/ -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE -#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ -#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif @@ -350,28 +309,6 @@ #undef CONFIG_CMD_LOADS #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -464,11 +401,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - /* * Environment Configuration */ @@ -478,11 +410,6 @@ #define CONFIG_HAS_ETH0 #endif -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_82xx\0" \ @@ -527,6 +454,4 @@ "unlock=yes\0" \ "" -#define CONFIG_BOOTCOMMAND "run net_nfs" - #endif /* __CONFIG_H */ -- cgit v1.2.3