From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- include/configs/makalu.h | 216 +++++++++++++++++++++++------------------------ 1 file changed, 108 insertions(+), 108 deletions(-) (limited to 'include/configs/makalu.h') diff --git a/include/configs/makalu.h b/include/configs/makalu.h index b7dddb70e..52339f9c6 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -53,9 +53,9 @@ * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_FLASH_BASE 0xFC000000 -#define CFG_FPGA_BASE 0xF0000000 -#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/ +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FPGA_BASE 0xF0000000 +#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/ /*----------------------------------------------------------------------- * Initial RAM & Stack Pointer Configuration Options @@ -71,25 +71,25 @@ * the latter of which is less than desireable since it requires * setting up the SDRAM and ECC in assembly code. * - * To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip + * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip * select on the External Bus Controller (EBC) and then select a - * value for 'CFG_INIT_RAM_ADDR' outside of the range of valid, - * physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and - * select a value for 'CFG_INIT_RAM_ADDR' within the range of valid, + * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid, + * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and + * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid, * physical SDRAM to use (3). *-----------------------------------------------------------------------*/ -#define CFG_INIT_DCACHE_CS 4 +#define CONFIG_SYS_INIT_DCACHE_CS 4 -#if defined(CFG_INIT_DCACHE_CS) -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */ +#if defined(CONFIG_SYS_INIT_DCACHE_CS) +#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */ #else -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + (32 << 20)) /* 32 MiB */ -#endif /* defined(CFG_INIT_DCACHE_CS) */ +#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ +#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ -#define CFG_INIT_RAM_END (4 << 10) /* 4 KiB */ -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_END (4 << 10) /* 4 KiB */ +#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) /* * If the data cache is being used for the primordial stack and global @@ -99,20 +99,20 @@ * for the POST word. */ -#if defined(CFG_INIT_DCACHE_CS) -# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -# define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) +#if defined(CONFIG_SYS_INIT_DCACHE_CS) +# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +# define CONFIG_SYS_POST_ALT_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) #else -# define CFG_INIT_EXTRA_SIZE 16 -# define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE) -# define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) -# define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR -#endif /* defined(CFG_INIT_DCACHE_CS) */ +# define CONFIG_SYS_INIT_EXTRA_SIZE 16 +# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE) +# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4) +# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR +#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CFG_EXT_SERIAL_CLOCK /* no ext. clk */ +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no ext. clk */ /* define this if you want console on UART1 */ #undef CONFIG_UART1_CONSOLE @@ -124,22 +124,22 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ @@ -150,73 +150,73 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ -#define CFG_SDRAM0_MB0CF_BASE (( 0 << 20) + CFG_SDRAM_BASE) -#define CFG_SDRAM0_MB1CF_BASE ((128 << 20) + CFG_SDRAM_BASE) +#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) +#define CONFIG_SYS_SDRAM0_MB1CF_BASE ((128 << 20) + CONFIG_SYS_SDRAM_BASE) /* DDR1/2 SDRAM Device Control Register Data Values */ -#define CFG_SDRAM0_MB0CF ((CFG_SDRAM0_MB0CF_BASE >> 3) | \ +#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \ SDRAM_RXBAS_SDSZ_128MB | \ SDRAM_RXBAS_SDAM_MODE2 | \ SDRAM_RXBAS_SDBE_ENABLE) -#define CFG_SDRAM0_MB1CF ((CFG_SDRAM0_MB1CF_BASE >> 3) | \ +#define CONFIG_SYS_SDRAM0_MB1CF ((CONFIG_SYS_SDRAM0_MB1CF_BASE >> 3) | \ SDRAM_RXBAS_SDSZ_128MB | \ SDRAM_RXBAS_SDAM_MODE2 | \ SDRAM_RXBAS_SDBE_ENABLE) -#define CFG_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE -#define CFG_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE -#define CFG_SDRAM0_MCOPT1 0x04322000 -#define CFG_SDRAM0_MCOPT2 0x00000000 -#define CFG_SDRAM0_MODT0 0x01800000 -#define CFG_SDRAM0_MODT1 0x00000000 -#define CFG_SDRAM0_CODT 0x0080f837 -#define CFG_SDRAM0_RTR 0x06180000 -#define CFG_SDRAM0_INITPLR0 0xa8380000 -#define CFG_SDRAM0_INITPLR1 0x81900400 -#define CFG_SDRAM0_INITPLR2 0x81020000 -#define CFG_SDRAM0_INITPLR3 0x81030000 -#define CFG_SDRAM0_INITPLR4 0x81010404 -#define CFG_SDRAM0_INITPLR5 0x81000542 -#define CFG_SDRAM0_INITPLR6 0x81900400 -#define CFG_SDRAM0_INITPLR7 0x8D080000 -#define CFG_SDRAM0_INITPLR8 0x8D080000 -#define CFG_SDRAM0_INITPLR9 0x8D080000 -#define CFG_SDRAM0_INITPLR10 0x8D080000 -#define CFG_SDRAM0_INITPLR11 0x81000442 -#define CFG_SDRAM0_INITPLR12 0x81010780 -#define CFG_SDRAM0_INITPLR13 0x81010400 -#define CFG_SDRAM0_INITPLR14 0x00000000 -#define CFG_SDRAM0_INITPLR15 0x00000000 -#define CFG_SDRAM0_RQDC 0x80000038 -#define CFG_SDRAM0_RFDC 0x00000209 -#define CFG_SDRAM0_RDCC 0x40000000 -#define CFG_SDRAM0_DLCR 0x030000a5 -#define CFG_SDRAM0_CLKTR 0x80000000 -#define CFG_SDRAM0_WRDTR 0x00000000 -#define CFG_SDRAM0_SDTR1 0x80201000 -#define CFG_SDRAM0_SDTR2 0x32204232 -#define CFG_SDRAM0_SDTR3 0x080b0d1a -#define CFG_SDRAM0_MMODE 0x00000442 -#define CFG_SDRAM0_MEMODE 0x00000404 +#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE +#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE +#define CONFIG_SYS_SDRAM0_MCOPT1 0x04322000 +#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000 +#define CONFIG_SYS_SDRAM0_MODT0 0x01800000 +#define CONFIG_SYS_SDRAM0_MODT1 0x00000000 +#define CONFIG_SYS_SDRAM0_CODT 0x0080f837 +#define CONFIG_SYS_SDRAM0_RTR 0x06180000 +#define CONFIG_SYS_SDRAM0_INITPLR0 0xa8380000 +#define CONFIG_SYS_SDRAM0_INITPLR1 0x81900400 +#define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000 +#define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000 +#define CONFIG_SYS_SDRAM0_INITPLR4 0x81010404 +#define CONFIG_SYS_SDRAM0_INITPLR5 0x81000542 +#define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400 +#define CONFIG_SYS_SDRAM0_INITPLR7 0x8D080000 +#define CONFIG_SYS_SDRAM0_INITPLR8 0x8D080000 +#define CONFIG_SYS_SDRAM0_INITPLR9 0x8D080000 +#define CONFIG_SYS_SDRAM0_INITPLR10 0x8D080000 +#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000442 +#define CONFIG_SYS_SDRAM0_INITPLR12 0x81010780 +#define CONFIG_SYS_SDRAM0_INITPLR13 0x81010400 +#define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000 +#define CONFIG_SYS_SDRAM0_INITPLR15 0x00000000 +#define CONFIG_SYS_SDRAM0_RQDC 0x80000038 +#define CONFIG_SYS_SDRAM0_RFDC 0x00000209 +#define CONFIG_SYS_SDRAM0_RDCC 0x40000000 +#define CONFIG_SYS_SDRAM0_DLCR 0x030000a5 +#define CONFIG_SYS_SDRAM0_CLKTR 0x80000000 +#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000 +#define CONFIG_SYS_SDRAM0_SDTR1 0x80201000 +#define CONFIG_SYS_SDRAM0_SDTR2 0x32204232 +#define CONFIG_SYS_SDRAM0_SDTR3 0x080b0d1a +#define CONFIG_SYS_SDRAM0_MMODE 0x00000442 +#define CONFIG_SYS_SDRAM0_MEMODE 0x00000404 /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ -#define CFG_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ /* Standard DTT sensor configuration */ #define CONFIG_DTT_DS1775 1 #define CONFIG_DTT_SENSORS { 0 } -#define CFG_I2C_DTT_ADDR 0x48 +#define CONFIG_SYS_I2C_DTT_ADDR 0x48 /* RTC configuration */ #define CONFIG_RTC_X1205 1 -#define CFG_I2C_RTC_ADDR 0x6f +#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /*----------------------------------------------------------------------- * Ethernet @@ -259,20 +259,20 @@ #define CONFIG_CMD_SNTP /* POST support */ -#define CONFIG_POST (CFG_POST_CACHE | \ - CFG_POST_CPU | \ - CFG_POST_ETHER | \ - CFG_POST_I2C | \ - CFG_POST_MEMORY | \ - CFG_POST_UART) +#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ + CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_ETHER | \ + CONFIG_SYS_POST_I2C | \ + CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_UART) /* Define here the base-addresses of the UARTs to test in POST */ -#define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE} +#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE} #define CONFIG_LOGBUFFER -#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */ +#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ -#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ /*----------------------------------------------------------------------- * PCI stuff @@ -285,40 +285,40 @@ /*----------------------------------------------------------------------- * PCIe stuff *----------------------------------------------------------------------*/ -#define CFG_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CFG_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */ +#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ +#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */ -#define CFG_PCIE0_CFGBASE 0xa0000000 /* remote access */ -#define CFG_PCIE0_XCFGBASE 0xb0000000 /* local access */ -#define CFG_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */ +#define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */ +#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */ +#define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */ -#define CFG_PCIE1_CFGBASE 0xc0000000 /* remote access */ -#define CFG_PCIE1_XCFGBASE 0xd0000000 /* local access */ -#define CFG_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */ +#define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */ +#define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */ +#define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */ -#define CFG_PCIE0_UTLBASE 0xef502000 -#define CFG_PCIE1_UTLBASE 0xef503000 +#define CONFIG_SYS_PCIE0_UTLBASE 0xef502000 +#define CONFIG_SYS_PCIE1_UTLBASE 0xef503000 /* base address of inbound PCIe window */ -#define CFG_PCIE_INBOUND_BASE 0x0000000000000000ULL +#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ /* Memory Bank 0 (NOR-FLASH) initialization */ -#define CFG_EBC_PB0AP 0x08033700 -#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000) +#define CONFIG_SYS_EBC_PB0AP 0x08033700 +#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xda000) /* Memory Bank 2 (CPLD) initialization */ -#define CFG_EBC_PB2AP 0x9400C800 -#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB2AP 0x9400C800 +#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */ -#define CFG_EBC_CFG 0x7FC00000 /* EBC0_CFG */ +#define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */ /*----------------------------------------------------------------------- * GPIO Setup *----------------------------------------------------------------------*/ -#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \ @@ -356,8 +356,8 @@ } \ } -#define CFG_GPIO_PCIE_RST 23 -#define CFG_GPIO_PCIE_CLKREQ 27 -#define CFG_GPIO_PCIE_WAKE 28 +#define CONFIG_SYS_GPIO_PCIE_RST 23 +#define CONFIG_SYS_GPIO_PCIE_CLKREQ 27 +#define CONFIG_SYS_GPIO_PCIE_WAKE 28 #endif /* __CONFIG_H */ -- cgit v1.2.3