From 1eac2a71417b6675b11aace72102a2e7fde8f5c6 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Nov 2006 15:42:37 +0100 Subject: [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese --- include/configs/p3mx.h | 450 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 450 insertions(+) create mode 100644 include/configs/p3mx.h (limited to 'include/configs/p3mx.h') diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h new file mode 100644 index 000000000..262e9d6ac --- /dev/null +++ b/include/configs/p3mx.h @@ -0,0 +1,450 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Based on original work by + * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards + * + * The defines: + * CONFIG_P3M750 or + * CONFIG_P3M7448 + * are written into include/config.h by the "make xxx_config" command + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_P3Mx /* used for both board versions */ + +#if defined (CONFIG_P3M750) +#define CONFIG_750FX /* 750GL/GX/FX */ +#define CFG_BOARD_NAME "P3M750" +#define CFG_BUS_HZ 100000000 +#define CFG_BUS_CLK CFG_BUS_HZ +#define CFG_TCLK 100000000 +#elif defined (CONFIG_P3M7448) +#define CONFIG_74xx +#define CFG_BOARD_NAME "P3M7448" +#define CFG_BUS_HZ 133333333 +#define CFG_BUS_CLK CFG_BUS_HZ +#define CFG_TCLK 133333333 +#endif +#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ + +/* which initialization functions to call for this board */ +#define CFG_BOARD_ASM_INIT 1 +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 +#ifdef CONFIG_P3M750 +#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#if defined (CONFIG_P3M750) +#define CFG_FLASH_BASE 0xff800000 /* start of flash banks */ +#define CFG_BOOT_SIZE _8M /* boot flash */ +#elif defined (CONFIG_P3M7448) +#define CFG_FLASH_BASE 0xff000000 /* start of flash banks */ +#define CFG_BOOT_SIZE _16M /* boot flash */ +#endif +#define CFG_BOOT_SPACE CFG_FLASH_BASE /* BOOT_CS0 flash 0 */ +#define CFG_MONITOR_BASE 0xfff00000 +#define CFG_RESET_ADDRESS 0xfff00100 +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MISC_REGION_BASE 0xf0000000 + +#define CFG_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */ +#define CFG_GT_REGS 0xf1000000 /* GT Registers are mapped here */ +#define CFG_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */ + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ + /* + * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * To an unused memory region. The stack will remain in cache until RAM + * is initialized +*/ +#undef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x42000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_MPSC /* MV64460 Serial */ +#define CONFIG_MPSC_PORT 0 +#define CONFIG_BAUDRATE 115200 /* console baudrate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/*----------------------------------------------------------------------- + * Ethernet + *----------------------------------------------------------------------*/ +/* Change the default ethernet port, use this define (options: 0, 1, 2) */ +#define CFG_ETH_PORT ETH_0 +#define CONFIG_NET_MULTI +#define MV_ETH_DEVS 2 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#if defined (CONFIG_P3M750) +#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (1 device)*/ +#elif defined (CONFIG_P3M7448) +#define CFG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */ +#endif +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_MV64460_ECC + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CFG_I2C_SPEED 100000 /* I2C speed default */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ + +/* PCI MEMORY MAP section */ +#define CFG_PCI0_MEM_BASE 0x80000000 +#define CFG_PCI0_MEM_SIZE _128M +#define CFG_PCI1_MEM_BASE 0x88000000 +#define CFG_PCI1_MEM_SIZE _128M + +#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE) +#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE) + +/* PCI I/O MAP section */ +#define CFG_PCI0_IO_BASE 0xfa000000 +#define CFG_PCI0_IO_SIZE _16M +#define CFG_PCI1_IO_BASE 0xfb000000 +#define CFG_PCI1_IO_SIZE _16M + +#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE) +#define CFG_PCI0_IO_SPACE_PCI 0x00000000 +#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) +#define CFG_PCI1_IO_SPACE_PCI 0x00000000 + +#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) + +#define CFG_PCI_IDSEL 0x30 + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "u-boot=p3mx/u-boot/u-boot.bin\0" \ + "load=tftp 100000 ${u-boot}\0" \ + "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \ + "cp.b 100000 fff00000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "serverip=11.0.0.152\0" + +#if defined (CONFIG_P3M750) +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "hostname=p3m750\0" \ + "bootfile=/tftpboot/p3mx/vxWorks.st\0" \ + "kernel_addr=fc000000\0" \ + "ramdisk_addr=fc180000\0" \ + "vxfile=p3m750/vxWorks\0" \ + "vxuser=ddg\0" \ + "vxpass=ddg\0" \ + "vxtarget=target\0" \ + "vxflags=0x8\0" \ + "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \ + "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \ + "f=${vxflags}\0" +#elif defined (CONFIG_P3M7448) +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "hostname=p3m7448\0" +#endif + +#if defined (CONFIG_P3M750) +#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx" +#elif defined (CONFIG_P3M7448) +#define CONFIG_BOOTCOMMAND " " +#endif + +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DIAG | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_PCI | \ + CFG_CMD_CACHE | \ + CFG_CMD_SDRAM) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x08000000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * Marvell MV64460 config settings + *----------------------------------------------------------------------*/ +/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */ +#if defined (CONFIG_P3M750) +#define CFG_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/ +#elif defined (CONFIG_P3M7448) +#define CFG_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */ +#endif + +/* + * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered) + * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered) + * MPP[2] NC + * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered) + * MPP[4] PCI Monarch# GPIO IN Connected to P12 + * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered) + * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14 + * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14 + * MPP[8] Reserved Do not use + * MPP[9] Reserved Do not use + * MPP[10] Reserved Do not use + * MPP[11] Reserved Do not use + * MPP[12] Phy 0 Interrupt Int IN + * MPP[13] Phy 1 Interrupt Int IN + * MPP[14] NC + * MPP[15] NC + * MPP[16] PCI Interrupt C Int IN Connected to P11 + * MPP[17] PCI Interrupt D Int IN Connected to P11 + * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24] + * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic + * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog + * MPP[21] NC + * MPP[22] GP LED Green GPIO OUT + * MPP[23] GP LED Red GPIO OUT + * MPP[24] Watchdog NMI# Int OUT + * MPP[25] NC + * MPP[26] NC + * MPP[27] PCI Interrupt A Int IN Connected to P11 + * MPP[28] NC + * MPP[29] PCI Interrupt B Int IN Connected to P11 + * MPP[30] Module reset GPIO OUT Board reset + * MPP[31] PCI EReady GPIO IN Connected to P12 + */ +#define CFG_MPP_CONTROL_0 0x00303022 +#define CFG_MPP_CONTROL_1 0x00000000 +#define CFG_MPP_CONTROL_2 0x00004000 +#define CFG_MPP_CONTROL_3 0x00000004 +#define CFG_GPP_LEVEL_CONTROL 0x280730D0 + +/*---------------------------------------------------------------------- + * Initial BAT mappings + */ + +/* NOTES: + * 1) GUARDED and WRITE_THRU not allowed in IBATS + * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT + */ +/* SDRAM */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) +#define CFG_DBAT0U CFG_IBAT0U + +/* init ram */ +#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* PCI0, PCI1 in one BAT */ +#define CFG_IBAT2L BATL_NO_ACCESS +#define CFG_IBAT2U CFG_DBAT2U +#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* GT regs, bootrom, all the devices, PCI I/O */ +#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) +#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) +#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U CFG_IBAT4U + +/* set rest out of range for Linux !!!!!!!!!!! */ + +/* IBAT5 and DBAT5 */ +#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT5U CFG_IBAT5U + +/* IBAT6 and DBAT6 */ +#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U CFG_IBAT6U + +/* IBAT7 and DBAT7 */ +#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT7U CFG_IBAT7U + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CFG_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * L2CR setup -- make sure this is right for your board! + * look in include/mpc74xx.h for the defines used here + */ +#define CFG_L2 + +#if defined (CONFIG_750CX) || defined (CONFIG_750FX) +#define L2_INIT 0 +#else +#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ + L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) +#endif + +#define L2_ENABLE (L2_INIT | L2CR_L2E) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ -- cgit v1.2.3