From 26a34560d56a9df5bc2ae23525d9229736134757 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 4 Jul 2007 22:33:17 -0500 Subject: include/configs: Use new CONFIG_CMD_* in various p* named board config files. Signed-off-by: Jon Loeliger --- include/configs/pcs440ep.h | 49 +++++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 24 deletions(-) (limited to 'include/configs/pcs440ep.h') diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 751b51277..f0cd8d3c0 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -208,37 +208,38 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_USB ) +/* + * Command line configuration. + */ +#include +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB -#define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +#define CONFIG_SUPPORT_VFAT /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -393,7 +394,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -405,7 +406,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -- cgit v1.2.3 From 079a136c3588814784561d6e4856970ee82d6e2a Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Tue, 10 Jul 2007 10:12:10 -0500 Subject: include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger --- board/fads/fads.h | 10 ++++++++++ include/configs/MPC8313ERDB.h | 9 +++++++++ include/configs/MPC832XEMDS.h | 9 +++++++++ include/configs/MPC8568MDS.h | 9 +++++++++ include/configs/acadia.h | 9 +++++++++ include/configs/bf533-ezkit.h | 9 +++++++++ include/configs/bf533-stamp.h | 9 +++++++++ include/configs/bf537-stamp.h | 9 +++++++++ include/configs/bf561-ezkit.h | 9 +++++++++ include/configs/integratorap.h | 9 +++++++++ include/configs/integratorcp.h | 9 +++++++++ include/configs/katmai.h | 9 +++++++++ include/configs/lwmon5.h | 9 +++++++++ include/configs/ml401.h | 9 +++++++++ include/configs/motionpro.h | 9 +++++++++ include/configs/p3p440.h | 9 +++++++++ include/configs/pb1x00.h | 9 +++++++++ include/configs/pcs440ep.h | 9 +++++++++ include/configs/pdnb3.h | 9 +++++++++ include/configs/pf5200.h | 24 +++++++++++++----------- include/configs/pleb2.h | 9 +++++++++ include/configs/ppmc7xx.h | 9 +++++++++ include/configs/purple.h | 9 +++++++++ include/configs/pxa255_idp.h | 9 +++++++++ include/configs/r5200.h | 9 +++++++++ include/configs/rsdproto.h | 9 +++++++++ include/configs/sbc2410x.h | 9 +++++++++ include/configs/sbc8349.h | 9 +++++++++ include/configs/sbc8560.h | 9 +++++++++ include/configs/sc3.h | 9 +++++++++ include/configs/sc520_cdp.h | 9 +++++++++ include/configs/sc520_spunk.h | 9 +++++++++ include/configs/scb9328.h | 11 ++++++++++- include/configs/sequoia.h | 9 +++++++++ include/configs/shannon.h | 9 +++++++++ include/configs/smdk2400.h | 9 +++++++++ include/configs/smdk2410.h | 9 +++++++++ include/configs/smmaco4.h | 12 ++++++++++-- include/configs/sorcery.h | 9 +++++++++ include/configs/spc1920.h | 11 ++++++++++- include/configs/spieval.h | 12 ++++++++++-- include/configs/stxgp3.h | 9 +++++++++ include/configs/stxssa.h | 9 +++++++++ include/configs/suzaku.h | 9 +++++++++ include/configs/taishan.h | 9 +++++++++ include/configs/tb0229.h | 9 +++++++++ include/configs/trab.h | 9 +++++++++ include/configs/uc101.h | 12 ++++++++++-- include/configs/utx8245.h | 9 +++++++++ include/configs/v38b.h | 9 +++++++++ include/configs/walnut.h | 9 +++++++++ include/configs/wepep250.h | 11 ++++++++++- include/configs/xaeniax.h | 9 +++++++++ include/configs/xm250.h | 9 +++++++++ include/configs/xsengine.h | 9 +++++++++ include/configs/xupv2p.h | 9 +++++++++ include/configs/yosemite.h | 9 +++++++++ include/configs/yucca.h | 9 +++++++++ include/configs/zylonite.h | 9 +++++++++ 59 files changed, 542 insertions(+), 20 deletions(-) (limited to 'include/configs/pcs440ep.h') diff --git a/board/fads/fads.h b/board/fads/fads.h index 8558b7426..75237818c 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -95,6 +95,16 @@ #define CFG_DISCOVER_PHY #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + #if !defined(FADS_COMMANDS_ALREADY_DEFINED) /* * Command line configuration. diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 3334f0fe9..45a7d8179 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -341,6 +341,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 1984157e1..f62ca2c42 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -423,6 +423,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 41b1ae120..eef168c25 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -384,6 +384,15 @@ extern unsigned long get_clock_freq(void); #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 5bd8ac63e..e3f6e2c8b 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -299,6 +299,15 @@ #define CONFIG_SUPPORT_VFAT +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 487ca6a18..6cb6bc4f7 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -97,6 +97,15 @@ #define CONFIG_LOADS_ECHO 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index f93c61e4b..cce6ef79f 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -289,6 +289,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index bea157a45..b9a9e3cb7 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -163,6 +163,15 @@ #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 40f5abc74..29662604f 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -187,6 +187,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index be3b1140b..1452bf2c4 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -69,6 +69,15 @@ /*#define CONFIG_NET_MULTI */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 191c5e61e..69310d4df 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -71,6 +71,15 @@ #define CFG_SERIAL1 0x17000000 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 9258e7dd8..110ad44ee 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -211,6 +211,15 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 13cbed5e9..f24dac417 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -224,6 +224,15 @@ #define CONFIG_ISO_PARTITION +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/ml401.h b/include/configs/ml401.h index 6cfc9478a..7eeae708a 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -145,6 +145,15 @@ #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 7a61e4939..e0a827fdd 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -36,6 +36,15 @@ #define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 2a429614a..51f19a145 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -169,6 +169,15 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index c84795b6a..810e0f046 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -177,6 +177,15 @@ #define CFG_CACHELINE_SIZE 32 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index f0cd8d3c0..aa66c30f0 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -209,6 +209,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 5d6e169c2..5b5b0efb7 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -72,6 +72,15 @@ #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 3e72c652b..18d0c879a 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -85,13 +85,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif - -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -101,26 +94,35 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ #include #define CONFIG_CMD_BSP -#define CONFIG_PCI_CMD #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE +#ifdef CONFIG_MPC5200 +#define CONFIG_CMD_PCI +#endif + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index f581fe5e2..863029d14 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -67,6 +67,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 6a3bd33d2..6e451d8b6 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -68,6 +68,15 @@ * CMD_PCI - PCI Bus scanning command */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/purple.h b/include/configs/purple.h index 61e18d7b7..6eb618ed6 100644 --- a/include/configs/purple.h +++ b/include/configs/purple.h @@ -82,6 +82,15 @@ #define CONFIG_BOOTCOMMAND "run flash_self" +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index d7e4e8ac2..0e884fc11 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -103,6 +103,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/r5200.h b/include/configs/r5200.h index 059293900..0e743bb2e 100644 --- a/include/configs/r5200.h +++ b/include/configs/r5200.h @@ -67,6 +67,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 93f5c6be8..814082ccc 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -102,6 +102,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index fe06be674..b4a063a1d 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -83,6 +83,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 81322dfc7..83a81fec1 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -440,6 +440,15 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index ad610f031..defc42881 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -321,6 +321,15 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 9709fe292..cb2253698 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -168,6 +168,15 @@ #define CONFIG_MII 1 /* add 405GP MII PHY management */ #define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index 8689be4df..8491d97ae 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -66,6 +66,15 @@ #define CONFIG_BAUDRATE 9600 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index e761ca7b5..c6f7f1526 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -65,6 +65,15 @@ #define CONFIG_BAUDRATE 9600 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 489c35ff4..d140241bf 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -35,6 +35,15 @@ */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ @@ -180,7 +189,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_FIRST_SECTOR 5 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 14a64e8c3..ec6e9bd6b 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -307,6 +307,15 @@ #define CONFIG_ISO_PARTITION +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/shannon.h b/include/configs/shannon.h index cad38d0c0..c1fa53f1a 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -67,6 +67,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index 22e69725b..05f605372 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -87,6 +87,15 @@ #define CONFIG_RTC_S3C24X0 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index cd3d32765..ca404ff45 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -73,6 +73,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index a965e8ac8..ad68c751c 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -65,6 +65,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ @@ -338,8 +347,7 @@ #endif /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index e8f4cfac3..fe014eabc 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -64,6 +64,15 @@ #define CONFIG_PCI_CFG_SIZE 0x01000000 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index ea6a11237..b4ab9ad97 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -81,6 +81,15 @@ #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ @@ -194,7 +203,7 @@ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#ifdef CFG_CMD_DATE +#ifdef CONFIG_CMD_DATE # define CONFIG_RTC_DS3231 # define CFG_I2C_RTC_ADDR 0x68 #endif diff --git a/include/configs/spieval.h b/include/configs/spieval.h index ccfcf1c8d..4b618f36a 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -121,6 +121,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ @@ -419,8 +428,7 @@ #endif /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 9c55844df..1f41cf769 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -298,6 +298,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index f480bd530..a880931cb 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -326,6 +326,15 @@ #define CONFIG_TIMESTAMP /* Print image info with ts */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index cb1a2e6a1..08ac9cbd5 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -56,6 +56,15 @@ #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 4889f7026..baa4fbd31 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -235,6 +235,15 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h index df031753d..a21af219a 100644 --- a/include/configs/tb0229.h +++ b/include/configs/tb0229.h @@ -88,6 +88,15 @@ #define CONFIG_BOOTCOMMAND "run netboot" +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/trab.h b/include/configs/trab.h index a696b634a..52bcbfc15 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -131,6 +131,15 @@ #define CONFIG_RTC_S3C24X0 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 64461f6a9..3b471d0a9 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -51,6 +51,15 @@ #define CONFIG_DOS_PARTITION +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ @@ -265,8 +274,7 @@ #endif /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index f39954314..cd00c49fc 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -87,6 +87,15 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" #define CONFIG_ENV_OVERWRITE +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 3e3d11674..c0b1a15e6 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -85,6 +85,15 @@ #define CONFIG_USB_CONFIG 0x00001000 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 2112b5317..180549efa 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -99,6 +99,15 @@ #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index 3b360402d..c67b30122 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -35,6 +35,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ @@ -149,7 +158,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_FIRST_SECTOR 5 diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 1149542bb..7418986ca 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -65,6 +65,15 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 225d46a38..bcd16ec5d 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -82,6 +82,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 37daefe87..5733933d6 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -103,6 +103,15 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index cfa128113..35001d7ad 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -120,6 +120,15 @@ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 853e4bcc0..dd6d9acdd 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -249,6 +249,15 @@ #endif +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index ab323aaab..9c536fd12 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -192,6 +192,15 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 3e636a27d..517ecb13b 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -77,6 +77,15 @@ #define CONFIG_BAUDRATE 115200 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ -- cgit v1.2.3