From 1d0350ed0b1b0f63e3fb5db6b19397b84a2ea1c7 Mon Sep 17 00:00:00 2001
From: wdenk <wdenk>
Date: Mon, 11 Nov 2002 21:14:20 +0000
Subject: * Patch by Jim Sandoz, 07 Nov 2002:   Increase number of network RX
 buffers (PKTBUFSRX in   "include/net.h") for EEPRO100 based boards
 (especially SP8240)   which showed "Receiver is not ready" errors when U-Boot
 was   processing the receive buffers slower than the network controller   was
 filling them.

* Get rid of obsolete include/mpc74xx.h
---
 include/configs/sbc8260.h | 54 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 50 insertions(+), 4 deletions(-)

(limited to 'include/configs/sbc8260.h')

diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index b89f503b6..ec6017938 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -294,9 +294,7 @@
  * is on the board edge side of both the LED strip and the DS0-DS7
  * switch.
  */
-#if 0
-# define CONFIG_MISC_INIT_R
-#endif
+#undef	CONFIG_MISC_INIT_R
 
 /* Set to a positive value to delay for running BOOTCOMMAND */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
@@ -312,6 +310,43 @@
 # define DEBUG_BOOTKEYS		0
 #endif
 
+/* Define this to contain any number of null terminated strings that
+ * will be part of the default enviroment compiled into the boot image.
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"serverip=192.168.123.201\0" \
+	"ipaddr=192.168.123.203\0" \
+	"reprog="\
+		"tftpboot 0x140000 /bdi2000/u-boot.bin; " \
+		"protect off 1:0; " \
+		"erase 1:0; " \
+		"cp.b 140000 40000000 $(filesize); " \
+		"protect on 1:0\0" \
+	"zapenv="\
+		"protect off 1:1; " \
+		"erase 1:1; " \
+		"protect on 1:1\0" \
+	"root-on-initrd="\
+		"setenv bootcmd "\
+		"version;" \
+		"echo;" \
+		"bootp;" \
+		"setenv bootargs root=/dev/ram0 rw " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+		"run boot-hook;" \
+		"bootm\0" \
+	"root-on-nfs="\
+		"setenv bootcmd "\
+		"version;" \
+		"echo;" \
+		"bootp;" \
+		"setenv bootargs root=/dev/nfs rw " \
+		"nfsroot=$(serverip):$(rootpath) " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\\;" \
+		"run boot-hook;" \
+		"bootm\0" \
+	"boot-hook=echo boot-hook\0"
+
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
@@ -352,6 +387,16 @@
 /* Monitor Command Prompt */
 #define CFG_PROMPT		"=> "
 
+#undef  CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+/* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
+ * of an image is printed by image commands like bootm or iminfo.
+ */
+#define CONFIG_TIMESTAMP
+
 /* What U-Boot subsytems do you want enabled? */
 #ifdef CONFIG_ETHER_ON_FCC
 # define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
@@ -405,9 +450,10 @@
 
 #define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
 
-#define CFG_LOAD_ADDR		0x140000   /* default load address */
+#define CFG_LOAD_ADDR		0x400000   /* default load address */
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_ALT_MEMTEST			/* Select full-featured memory test */
 #define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
-- 
cgit v1.2.3