From cd65a3dc872407e6278062246a4eb5e10f180d7e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 16 Jun 2006 16:11:34 +0200 Subject: Adjust TQM5200 make targets Make the automatic CS configuration the default. The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB and CONFIG_TQM5200_AC are removed. "TQM5200_config" is now the default for STK52XX.200 base boards. On a STK52XX.100 base board "TQM5200_STK100_config" must be used. Patch by Martin Krause, 07 Nov 2005 --- include/configs/spieval.h | 28 +++------------------------- 1 file changed, 3 insertions(+), 25 deletions(-) (limited to 'include/configs/spieval.h') diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 96cb6e4c7..9ebb51e0a 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -191,16 +191,6 @@ #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" -#else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -217,7 +207,7 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "update=protect off FC000000 FC05FFFF;" \ "erase FC000000 FC05FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ @@ -283,13 +273,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -478,13 +461,9 @@ * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 #endif @@ -492,8 +471,7 @@ * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ -- cgit v1.2.3