From 29f8f58ff40c67f7f2e11afd1715173094e52ac2 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sat, 9 Aug 2008 23:17:32 +0200
Subject: TQM8xx{L,M}: try to normalize config files for TQM8xx? based board

- enable CFI driver where this was forgotten
- enable mtdparts support
- adjust default environment
etc.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/virtlab2.h | 40 +++++++++++++++++++++++++++++-----------
 1 file changed, 29 insertions(+), 11 deletions(-)

(limited to 'include/configs/virtlab2.h')

diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 6bb075d27..54d9421d7 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,10 +37,6 @@
 #define CONFIG_VIRTLAB2		1	/* ...on a virtlab2 module	*/
 #define	CONFIG_TQM8xxL		1
 
-#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
-#define	CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
-#endif
-
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -70,9 +66,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"hostname=virtlab2\0"						\
+	"bootfile=virtlab2/uImage\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	"u-boot=virtlab2/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -114,6 +118,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -122,15 +127,16 @@
 #endif
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#if 0
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
@@ -197,7 +203,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
@@ -213,6 +219,18 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-- 
cgit v1.2.3