From b6e4c4033c4f889c452c511d38c77808c67f9cf7 Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 2 Jan 2004 16:05:07 +0000 Subject: * Patch by Denis Peter, 8 Dec 2003 - add support for the PATI board (MPC555) - add SPI support for the MPC5xx * Patch by Anders Larsen, 08 Dec 2003: add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; cleanup some redundand #defines --- include/mpc5xx.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'include/mpc5xx.h') diff --git a/include/mpc5xx.h b/include/mpc5xx.h index 345fca8de..7508f6df2 100644 --- a/include/mpc5xx.h +++ b/include/mpc5xx.h @@ -75,6 +75,10 @@ #define SIUMCR_DBPC01 0x00080000 /* - " - */ #define SIUMCR_DBPC10 0x00100000 /* - " - */ #define SIUMCR_DBPC11 0x00180000 /* - " - */ +#define SIUMCR_GPC00 0x00000000 /* General Pins Config */ +#define SIUMCR_GPC01 0x00020000 /* General Pins Config */ +#define SIUMCR_GPC10 0x00040000 /* General Pins Config */ +#define SIUMCR_GPC11 0x00060000 /* General Pins Config */ #define SIUMCR_DLK 0x00010000 /* Debug Register Lock */ #define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */ #define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */ @@ -98,6 +102,7 @@ * PISCR - Periodic Interrupt Status and Control Register */ #define PISCR_PITF ((ushort)0x0002) /* PIT stops when FREEZE */ +#define PISCR_PS 0x0080 /* Periodic Interrupt Status */ /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register @@ -106,11 +111,12 @@ #define PLPRCR_DIVF_MSK 0x0000001f /* DIVF mask */ #define PLPRCR_CSRC_MSK 0x00000400 /* CSRC mask */ #define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */ -#define PLPRCR_DIVF_0 0x00900000 /* Division factor 0 */ -#define PLPRCR_MF_9 0x00000000 /* Mulitipliaction factor 9 */ +#define PLPRCR_DIVF_0 0x00000000 /* Division factor 0 */ +#define PLPRCR_MF_9 0x00900000 /* Mulitipliaction factor 9 */ #define PLPRCR_TEXPS 0x00004000 /* TEXP Status */ #define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */ #define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */ +#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */ /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register @@ -124,6 +130,7 @@ #define SCCR_TBS 0x02000000 /* Time Base Source */ #define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */ #define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */ +#define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */ #define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */ #define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */ @@ -136,6 +143,7 @@ #define BR_PS_16 0x00000800 /* 16 bit port size */ #define BR_PS_32 0x00000000 /* 32 bit port size */ #define BR_LBDIR 0x00000008 /* Late burst data in progess */ +#define BR_SETA 0x00000004 /* External Data Acknowledge */ #define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */ #define OR_SCY_1 0x00000000 /* 1 clock cycle wait state */ #define OR_SCY_8 0x00000080 /* 8 clock cycles wait states */ @@ -143,7 +151,7 @@ #define OR_BSCY 0x00000060 /* Burst beats length in clocks */ #define OR_ACS_10 0x00000600 /* Adress to chip-select setup */ #define OR_CSNT 0x00000800 /* Chip-select negotation time */ -#define OR_ETHR 0x00000000 /* Extended hold time on read */ +#define OR_ETHR 0x00000100 /* Extended hold time on read */ #define OR_ADDR_MK_FF 0xFF000000 #define OR_ADDR_MK_FFFF 0xFFFF0000 -- cgit v1.2.3