From 429168ea88daf7140005c790796fc150d746aacf Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 2 Aug 2004 23:39:03 +0000 Subject: Patches by Lars Munch, 12 Jul 2004: - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk board specific - split out the LXT971A PHY from ns_9750_eth.h - split the dm9161 phy part out of at91rm9200_ether.c --- include/ns9750_eth.h | 233 +-------------------------------------------------- 1 file changed, 2 insertions(+), 231 deletions(-) (limited to 'include/ns9750_eth.h') diff --git a/include/ns9750_eth.h b/include/ns9750_eth.h index ce0c84183..978c0bbdb 100644 --- a/include/ns9750_eth.h +++ b/include/ns9750_eth.h @@ -31,6 +31,8 @@ #ifdef CONFIG_DRIVER_NS9750_ETHERNET +#include "lxt971a.h" + #define NS9750_ETH_MODULE_BASE (0xA0600000) #define get_eth_reg_addr(c) \ @@ -286,237 +288,6 @@ #define NS9750_ETH_RXFREE_B (0x00000002) #define NS9750_ETH_RXFREE_A (0x00000001) -/* PHY definitions (LXT971A) [2] */ - -#define PHY_COMMON_CTRL (0x00) -#define PHY_COMMON_STAT (0x01) -#define PHY_COMMON_ID1 (0x02) -#define PHY_COMMON_ID2 (0x03) -#define PHY_COMMON_AUTO_ADV (0x04) -#define PHY_COMMON_AUTO_LNKB (0x05) -#define PHY_COMMON_AUTO_EXP (0x06) -#define PHY_COMMON_AUTO_NEXT (0x07) -#define PHY_COMMON_AUTO_LNKN (0x08) -#define PHY_LXT971_PORT_CFG (0x10) -#define PHY_LXT971_STAT2 (0x11) -#define PHY_LXT971_INT_ENABLE (0x12) -#define PHY_LXT971_INT_STATUS (0x13) -#define PHY_LXT971_LED_CFG (0x14) -#define PHY_LXT971_DIG_CFG (0x1A) -#define PHY_LXT971_TX_CTRL (0x1E) - -/* CTRL PHY Control Register Bit Fields */ - -#define PHY_COMMON_CTRL_RESET (0x8000) -#define PHY_COMMON_CTRL_LOOPBACK (0x4000) -#define PHY_COMMON_CTRL_SPD_MA (0x2040) -#define PHY_COMMON_CTRL_SPD_10 (0x0000) -#define PHY_COMMON_CTRL_SPD_100 (0x2000) -#define PHY_COMMON_CTRL_SPD_1000 (0x0040) -#define PHY_COMMON_CTRL_SPD_RES (0x2040) -#define PHY_COMMON_CTRL_AUTO_NEG (0x1000) -#define PHY_COMMON_CTRL_POWER_DN (0x0800) -#define PHY_COMMON_CTRL_ISOLATE (0x0400) -#define PHY_COMMON_CTRL_RES_AUTO (0x0200) -#define PHY_COMMON_CTRL_DUPLEX (0x0100) -#define PHY_COMMON_CTRL_COL_TEST (0x0080) -#define PHY_COMMON_CTRL_RES1 (0x003F) - -/* STAT Status Register Bit Fields */ - -#define PHY_COMMON_STAT_100BT4 (0x8000) -#define PHY_COMMON_STAT_100BXFD (0x4000) -#define PHY_COMMON_STAT_100BXHD (0x2000) -#define PHY_COMMON_STAT_10BTFD (0x1000) -#define PHY_COMMON_STAT_10BTHD (0x0800) -#define PHY_COMMON_STAT_100BT2FD (0x0400) -#define PHY_COMMON_STAT_100BT2HD (0x0200) -#define PHY_COMMON_STAT_EXT_STAT (0x0100) -#define PHY_COMMON_STAT_RES1 (0x0080) -#define PHY_COMMON_STAT_MF_PSUP (0x0040) -#define PHY_COMMON_STAT_AN_COMP (0x0020) -#define PHY_COMMON_STAT_RMT_FLT (0x0010) -#define PHY_COMMON_STAT_AN_CAP (0x0008) -#define PHY_COMMON_STAT_LNK_STAT (0x0004) -#define PHY_COMMON_STAT_JAB_DTCT (0x0002) -#define PHY_COMMON_STAT_EXT_CAP (0x0001) - - -/* AUTO_ADV Auto-neg Advert Register Bit Fields */ - -#define PHY_COMMON_AUTO_ADV_NP (0x8000) -#define PHY_COMMON_AUTO_ADV_RES1 (0x4000) -#define PHY_COMMON_AUTO_ADV_RMT_FLT (0x2000) -#define PHY_COMMON_AUTO_ADV_RES2 (0x1000) -#define PHY_COMMON_AUTO_ADV_AS_PAUSE (0x0800) -#define PHY_COMMON_AUTO_ADV_PAUSE (0x0400) -#define PHY_COMMON_AUTO_ADV_100BT4 (0x0200) -#define PHY_COMMON_AUTO_ADV_100BTXFD (0x0100) -#define PHY_COMMON_AUTO_ADV_100BTX (0x0080) -#define PHY_COMMON_AUTO_ADV_10BTFD (0x0040) -#define PHY_COMMON_AUTO_ADV_10BT (0x0020) -#define PHY_COMMON_AUTO_ADV_SEL_FLD_MA (0x001F) -#define PHY_COMMON_AUTO_ADV_802_9 (0x0002) -#define PHY_COMMON_AUTO_ADV_802_3 (0x0001) - -/* AUTO_LNKB Auto-neg Link Ability Register Bit Fields */ - -#define PHY_COMMON_AUTO_LNKB_NP (0x8000) -#define PHY_COMMON_AUTO_LNKB_ACK (0x4000) -#define PHY_COMMON_AUTO_LNKB_RMT_FLT (0x2000) -#define PHY_COMMON_AUTO_LNKB_RES2 (0x1000) -#define PHY_COMMON_AUTO_LNKB_AS_PAUSE (0x0800) -#define PHY_COMMON_AUTO_LNKB_PAUSE (0x0400) -#define PHY_COMMON_AUTO_LNKB_100BT4 (0x0200) -#define PHY_COMMON_AUTO_LNKB_100BTXFD (0x0100) -#define PHY_COMMON_AUTO_LNKB_100BTX (0x0080) -#define PHY_COMMON_AUTO_LNKB_10BTFD (0x0040) -#define PHY_COMMON_AUTO_LNKB_10BT (0x0020) -#define PHY_COMMON_AUTO_LNKB_SEL_FLD_MA (0x001F) -#define PHY_COMMON_AUTO_LNKB_802_9 (0x0002) -#define PHY_COMMON_AUTO_LNKB_802_3 (0x0001) - -/* AUTO_EXP Auto-neg Expansion Register Bit Fields */ - -#define PHY_COMMON_AUTO_EXP_RES1 (0xFFC0) -#define PHY_COMMON_AUTO_EXP_BASE_PAGE (0x0020) -#define PHY_COMMON_AUTO_EXP_PAR_DT_FLT (0x0010) -#define PHY_COMMON_AUTO_EXP_LNK_NP_CAP (0x0008) -#define PHY_COMMON_AUTO_EXP_NP_CAP (0x0004) -#define PHY_COMMON_AUTO_EXP_PAGE_REC (0x0002) -#define PHY_COMMON_AUTO_EXP_LNK_AN_CAP (0x0001) - -/* AUTO_NEXT Aut-neg Next Page Tx Register Bit Fields */ - -#define PHY_COMMON_AUTO_NEXT_NP (0x8000) -#define PHY_COMMON_AUTO_NEXT_RES1 (0x4000) -#define PHY_COMMON_AUTO_NEXT_MSG_PAGE (0x2000) -#define PHY_COMMON_AUTO_NEXT_ACK_2 (0x1000) -#define PHY_COMMON_AUTO_NEXT_TOGGLE (0x0800) -#define PHY_COMMON_AUTO_NEXT_MSG (0x07FF) - -/* AUTO_LNKN Auto-neg Link Partner Rx Reg Bit Fields */ - -#define PHY_COMMON_AUTO_LNKN_NP (0x8000) -#define PHY_COMMON_AUTO_LNKN_ACK (0x4000) -#define PHY_COMMON_AUTO_LNKN_MSG_PAGE (0x2000) -#define PHY_COMMON_AUTO_LNKN_ACK_2 (0x1000) -#define PHY_COMMON_AUTO_LNKN_TOGGLE (0x0800) -#define PHY_COMMON_AUTO_LNKN_MSG (0x07FF) - -/* PORT_CFG Port Configuration Register Bit Fields */ - -#define PHY_LXT971_PORT_CFG_RES1 (0x8000) -#define PHY_LXT971_PORT_CFG_FORCE_LNK (0x4000) -#define PHY_LXT971_PORT_CFG_TX_DISABLE (0x2000) -#define PHY_LXT971_PORT_CFG_BYPASS_SCR (0x1000) -#define PHY_LXT971_PORT_CFG_RES2 (0x0800) -#define PHY_LXT971_PORT_CFG_JABBER (0x0400) -#define PHY_LXT971_PORT_CFG_SQE (0x0200) -#define PHY_LXT971_PORT_CFG_TP_LOOPBACK (0x0100) -#define PHY_LXT971_PORT_CFG_CRS_SEL (0x0080) -#define PHY_LXT971_PORT_CFG_SLEEP_MODE (0x0040) -#define PHY_LXT971_PORT_CFG_PRE_EN (0x0020) -#define PHY_LXT971_PORT_CFG_SLEEP_T_MA (0x0018) -#define PHY_LXT971_PORT_CFG_SLEEP_T_104 (0x0010) -#define PHY_LXT971_PORT_CFG_SLEEP_T_200 (0x0001) -#define PHY_LXT971_PORT_CFG_SLEEP_T_304 (0x0000) -#define PHY_LXT971_PORT_CFG_FLT_CODE_EN (0x0004) -#define PHY_LXT971_PORT_CFG_ALT_NP (0x0002) -#define PHY_LXT971_PORT_CFG_FIBER_SEL (0x0001) - -/* STAT2 Status Register #2 Bit Fields */ - -#define PHY_LXT971_STAT2_RES1 (0x8000) -#define PHY_LXT971_STAT2_100BTX (0x4000) -#define PHY_LXT971_STAT2_TX_STATUS (0x2000) -#define PHY_LXT971_STAT2_RX_STATUS (0x1000) -#define PHY_LXT971_STAT2_COL_STATUS (0x0800) -#define PHY_LXT971_STAT2_LINK (0x0400) -#define PHY_LXT971_STAT2_DUPLEX_MODE (0x0200) -#define PHY_LXT971_STAT2_AUTO_NEG (0x0100) -#define PHY_LXT971_STAT2_AUTO_NEG_COMP (0x0080) -#define PHY_LXT971_STAT2_RES2 (0x0040) -#define PHY_LXT971_STAT2_POLARITY (0x0020) -#define PHY_LXT971_STAT2_PAUSE (0x0010) -#define PHY_LXT971_STAT2_ERROR (0x0008) -#define PHY_LXT971_STAT2_RES3 (0x0007) - -/* INT_ENABLE Interrupt Enable Register Bit Fields */ - -#define PHY_LXT971_INT_ENABLE_RES1 (0xFF00) -#define PHY_LXT971_INT_ENABLE_ANMSK (0x0080) -#define PHY_LXT971_INT_ENABLE_SPEEDMSK (0x0040) -#define PHY_LXT971_INT_ENABLE_DUPLEXMSK (0x0020) -#define PHY_LXT971_INT_ENABLE_LINKMSK (0x0010) -#define PHY_LXT971_INT_ENABLE_RES2 (0x000C) -#define PHY_LXT971_INT_ENABLE_INTEN (0x0002) -#define PHY_LXT971_INT_ENABLE_TINT (0x0001) - -/* INT_STATUS Interrupt Status Register Bit Fields */ - -#define PHY_LXT971_INT_STATUS_RES1 (0xFF00) -#define PHY_LXT971_INT_STATUS_ANDONE (0x0080) -#define PHY_LXT971_INT_STATUS_SPEEDCHG (0x0040) -#define PHY_LXT971_INT_STATUS_DUPLEXCHG (0x0020) -#define PHY_LXT971_INT_STATUS_LINKCHG (0x0010) -#define PHY_LXT971_INT_STATUS_RES2 (0x0008) -#define PHY_LXT971_INT_STATUS_MDINT (0x0004) -#define PHY_LXT971_INT_STATUS_RES3 (0x0003) - -/* LED_CFG Interrupt LED Configuration Register Bit Fields */ - -#define PHY_LXT971_LED_CFG_SHIFT_LED1 (0x000C) -#define PHY_LXT971_LED_CFG_SHIFT_LED2 (0x0008) -#define PHY_LXT971_LED_CFG_SHIFT_LED3 (0x0004) -#define PHY_LXT971_LED_CFG_LEDFREQ_MA (0x000C) -#define PHY_LXT971_LED_CFG_LEDFREQ_RES (0x000C) -#define PHY_LXT971_LED_CFG_LEDFREQ_100 (0x0008) -#define PHY_LXT971_LED_CFG_LEDFREQ_60 (0x0004) -#define PHY_LXT971_LED_CFG_LEDFREQ_30 (0x0000) -#define PHY_LXT971_LED_CFG_PULSE_STR (0x0002) -#define PHY_LXT971_LED_CFG_RES1 (0x0001) - -/* only one of these values must be shifted for each SHIFT_LED? */ - -#define PHY_LXT971_LED_CFG_UNUSED1 (0x000F) -#define PHY_LXT971_LED_CFG_DUPLEX_COL (0x000E) -#define PHY_LXT971_LED_CFG_LINK_ACT (0x000D) -#define PHY_LXT971_LED_CFG_LINK_RX (0x000C) -#define PHY_LXT971_LED_CFG_TEST_BLK_SLW (0x000B) -#define PHY_LXT971_LED_CFG_TEST_BLK_FST (0x000A) -#define PHY_LXT971_LED_CFG_TEST_OFF (0x0009) -#define PHY_LXT971_LED_CFG_TEST_ON (0x0008) -#define PHY_LXT971_LED_CFG_RX_OR_TX (0x0007) -#define PHY_LXT971_LED_CFG_UNUSED2 (0x0006) -#define PHY_LXT971_LED_CFG_DUPLEX (0x0005) -#define PHY_LXT971_LED_CFG_LINK (0x0004) -#define PHY_LXT971_LED_CFG_COLLISION (0x0003) -#define PHY_LXT971_LED_CFG_RECEIVE (0x0002) -#define PHY_LXT971_LED_CFG_TRANSMIT (0x0001) -#define PHY_LXT971_LED_CFG_SPEED (0x0000) - -/* DIG_CFG Digitial Configuration Register Bit Fields */ - -#define PHY_LXT971_DIG_CFG_RES1 (0xF000) -#define PHY_LXT971_DIG_CFG_MII_DRIVE (0x0800) -#define PHY_LXT971_DIG_CFG_RES2 (0x0400) -#define PHY_LXT971_DIG_CFG_SHOW_SYMBOL (0x0200) -#define PHY_LXT971_DIG_CFG_RES3 (0x01FF) - -#define PHY_LXT971_MDIO_MAX_CLK (8000000) - -/* TX_CTRL Transmit Control Register Bit Fields - documentation is buggy for this register, therefore setting not included */ - -typedef enum -{ - PHY_NONE = 0x0000, /* no PHY detected yet */ - PHY_LXT971A = 0x0013 -} PhyType; - -#define PHY_MDIO_MAX_CLK (2500000) - #ifndef NS9750_ETH_PHY_ADDRESS # define NS9750_ETH_PHY_ADDRESS (0x0001) /* suitable for UNC20 */ #endif /* NETARM_ETH_PHY_ADDRESS */ -- cgit v1.2.3