From e01bd218b00af73499331a1a701625a852cd286f Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 21 Mar 2007 13:38:59 +0100 Subject: [PATCH] Add AMCC PPC405EZ support This patch adds support for the new AMCC 405EZ PPC. It is in preparation for the AMCC Acadia board support. Please note that this Acadia/405EZ support is still in a beta stage. Still lot's of cleanup needed but we need a preliminary release now. Signed-off-by: Stefan Roese --- include/ppc405.h | 540 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 540 insertions(+) (limited to 'include/ppc405.h') diff --git a/include/ppc405.h b/include/ppc405.h index a49912cab..08f10d27b 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -117,6 +117,48 @@ /*-----------------------------------------------------------------------------+ | Universal interrupt controller interrupts +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_405EZ) +#define UIC_DMA0 0x80000000 /* DMA chan. 0 */ +#define UIC_DMA1 0x40000000 /* DMA chan. 1 */ +#define UIC_DMA2 0x20000000 /* DMA chan. 2 */ +#define UIC_DMA3 0x10000000 /* DMA chan. 3 */ +#define UIC_1588 0x08000000 /* IEEE 1588 network synchronization */ +#define UIC_UART0 0x04000000 /* UART 0 */ +#define UIC_UART1 0x02000000 /* UART 1 */ +#define UIC_CAN0 0x01000000 /* CAN 0 */ +#define UIC_CAN1 0x00800000 /* CAN 1 */ +#define UIC_SPI 0x00400000 /* SPI */ +#define UIC_IIC 0x00200000 /* IIC */ +#define UIC_CHT0 0x00100000 /* Chameleon timer high pri interrupt */ +#define UIC_CHT1 0x00080000 /* Chameleon timer high pri interrupt */ +#define UIC_USBH1 0x00040000 /* USB Host 1 */ +#define UIC_USBH2 0x00020000 /* USB Host 2 */ +#define UIC_USBDEV 0x00010000 /* USB Device */ +#define UIC_ENET 0x00008000 /* Ethernet interrupt status */ +#define UIC_ENET1 0x00008000 /* dummy define */ +#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */ + +#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */ +#define UIC_MAL_SERR 0x00002000 /* MAL SERR */ +#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */ +#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */ + +#define UIC_MAL_TXEOB 0x00001000 /* MAL TXEOB */ +#define UIC_MAL_TXEOB1 0x00000800 /* MAL TXEOB1 */ +#define UIC_MAL_RXEOB 0x00000400 /* MAL RXEOB */ +#define UIC_NAND 0x00000200 /* NAND Flash controller */ +#define UIC_ADC 0x00000100 /* ADC */ +#define UIC_DAC 0x00000080 /* DAC */ +#define UIC_OPB2PLB 0x00000040 /* OPB to PLB bridge interrupt */ +#define UIC_RESERVED0 0x00000020 /* Reserved */ +#define UIC_EXT0 0x00000010 /* External interrupt 0 */ +#define UIC_EXT1 0x00000008 /* External interrupt 1 */ +#define UIC_EXT2 0x00000004 /* External interrupt 2 */ +#define UIC_EXT3 0x00000002 /* External interrupt 3 */ +#define UIC_EXT4 0x00000001 /* External interrupt 4 */ + +#else /* !defined(CONFIG_405EZ) */ + #define UIC_UART0 0x80000000 /* UART 0 */ #define UIC_UART1 0x40000000 /* UART 1 */ #define UIC_IIC 0x20000000 /* IIC */ @@ -144,6 +186,7 @@ #define UIC_EXT4 0x00000004 /* External interrupt 4 */ #define UIC_EXT5 0x00000002 /* External interrupt 5 */ #define UIC_EXT6 0x00000001 /* External interrupt 6 */ +#endif /* defined(CONFIG_405EZ) */ /****************************************************************************** * SDRAM Controller @@ -496,6 +539,325 @@ */ #define VCO_MIN 500 #define VCO_MAX 1000 +#elif defined(CONFIG_405EZ) +/****************************************************************************** + * SDR Registers + ******************************************************************************/ +#define SDR_DCR_BASE 0x0E +#define sdrcfga (SDR_DCR_BASE+0x0) /* ADDR */ +#define sdrcfgd (SDR_DCR_BASE+0x1) /* Data */ + +#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data) +#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd) + +#define sdrnand0 0x4000 +#define sdrultra0 0x4040 +#define sdrultra1 0x4050 +#define sdricintstat 0x4510 + +#define SDR_NAND0_NDEN 0x80000000 + +#define SDR_ULTRA0_NDGPIOBP 0x80000000 +#define SDR_ULTRA0_CSN_MASK 0x78000000 +#define SDR_ULTRA0_CSNSEL0 0x40000000 +#define SDR_ULTRA0_CSNSEL1 0x20000000 +#define SDR_ULTRA0_CSNSEL2 0x10000000 +#define SDR_ULTRA0_CSNSEL3 0x08000000 + +#define SDR_ULTRA1_LEDNENABLE 0x40000000 + +#define SDR_ICRX_STAT 0x80000000 +#define SDR_ICTX0_STAT 0x40000000 +#define SDR_ICTX1_STAT 0x20000000 + +/****************************************************************************** + * Control + ******************************************************************************/ +#define CNTRL_DCR_BASE 0x0C +#define cprcfga (CNTRL_DCR_BASE+0x0) /* CPR addr reg */ +#define cprcfgd (CNTRL_DCR_BASE+0x1) /* CPR data reg */ + +/* CPR Registers */ +#define cprclkupd 0x020 /* CPR_CLKUPD */ +#define cprpllc 0x040 /* CPR_PLLC */ +#define cprplld 0x060 /* CPR_PLLD */ +#define cprprimad 0x080 /* CPR_PRIMAD */ +#define cprperd0 0x0e0 /* CPR_PERD0 */ +#define cprperd1 0x0e1 /* CPR_PERD1 */ +#define cprperc0 0x180 /* CPR_PERC0 */ +#define cprmisc0 0x181 /* CPR_MISC0 */ +#define cprmisc1 0x182 /* CPR_MISC1 */ + +/* + * Macro for accessing the indirect CPR register + */ +#define mtcpr(reg, data) mtdcr(cprcfga,reg);mtdcr(cprcfgd,data) +#define mfcpr(reg, data) mtdcr(cprcfga,reg);data = mfdcr(cprcfgd) + +#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */ +#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */ +#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ + +#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ +#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ + +#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ +#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ +#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ +#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ + +#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ +#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ +#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ +#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ + +#if 0 /* Deprecated */ +#define CNTRL_DCR_BASE 0x0f0 +#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ +#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */ +#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ +#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ +#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */ +#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */ + +#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ +#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ +#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ +#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/ +#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */ +#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */ +#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */ +#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */ +#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */ +#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */ + +/* Bit definitions */ +#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */ +#define PLLMR0_CPU_DIV_BYPASS 0x00000000 +#define PLLMR0_CPU_DIV_2 0x00100000 +#define PLLMR0_CPU_DIV_3 0x00200000 +#define PLLMR0_CPU_DIV_4 0x00300000 + +#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */ +#define PLLMR0_CPU_PLB_DIV_1 0x00000000 +#define PLLMR0_CPU_PLB_DIV_2 0x00010000 +#define PLLMR0_CPU_PLB_DIV_3 0x00020000 +#define PLLMR0_CPU_PLB_DIV_4 0x00030000 + +#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */ +#define PLLMR0_OPB_PLB_DIV_1 0x00000000 +#define PLLMR0_OPB_PLB_DIV_2 0x00001000 +#define PLLMR0_OPB_PLB_DIV_3 0x00002000 +#define PLLMR0_OPB_PLB_DIV_4 0x00003000 + +#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */ +#define PLLMR0_EXB_PLB_DIV_2 0x00000000 +#define PLLMR0_EXB_PLB_DIV_3 0x00000100 +#define PLLMR0_EXB_PLB_DIV_4 0x00000200 +#define PLLMR0_EXB_PLB_DIV_5 0x00000300 + +#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */ +#define PLLMR0_MAL_PLB_DIV_1 0x00000000 +#define PLLMR0_MAL_PLB_DIV_2 0x00000010 +#define PLLMR0_MAL_PLB_DIV_3 0x00000020 +#define PLLMR0_MAL_PLB_DIV_4 0x00000030 + +#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */ +#define PLLMR0_PCI_PLB_DIV_1 0x00000000 +#define PLLMR0_PCI_PLB_DIV_2 0x00000001 +#define PLLMR0_PCI_PLB_DIV_3 0x00000002 +#define PLLMR0_PCI_PLB_DIV_4 0x00000003 + +#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */ +#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */ +#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */ +#define PLLMR1_FBMUL_DIV_16 0x00000000 +#define PLLMR1_FBMUL_DIV_1 0x00100000 +#define PLLMR1_FBMUL_DIV_2 0x00200000 +#define PLLMR1_FBMUL_DIV_3 0x00300000 +#define PLLMR1_FBMUL_DIV_4 0x00400000 +#define PLLMR1_FBMUL_DIV_5 0x00500000 +#define PLLMR1_FBMUL_DIV_6 0x00600000 +#define PLLMR1_FBMUL_DIV_7 0x00700000 +#define PLLMR1_FBMUL_DIV_8 0x00800000 +#define PLLMR1_FBMUL_DIV_9 0x00900000 +#define PLLMR1_FBMUL_DIV_10 0x00A00000 +#define PLLMR1_FBMUL_DIV_11 0x00B00000 +#define PLLMR1_FBMUL_DIV_12 0x00C00000 +#define PLLMR1_FBMUL_DIV_13 0x00D00000 +#define PLLMR1_FBMUL_DIV_14 0x00E00000 +#define PLLMR1_FBMUL_DIV_15 0x00F00000 + +#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */ +#define PLLMR1_FWDVA_DIV_8 0x00000000 +#define PLLMR1_FWDVA_DIV_7 0x00010000 +#define PLLMR1_FWDVA_DIV_6 0x00020000 +#define PLLMR1_FWDVA_DIV_5 0x00030000 +#define PLLMR1_FWDVA_DIV_4 0x00040000 +#define PLLMR1_FWDVA_DIV_3 0x00050000 +#define PLLMR1_FWDVA_DIV_2 0x00060000 +#define PLLMR1_FWDVA_DIV_1 0x00070000 +#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */ +#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */ + +/* Defines for CPC0_EPRCSR register */ +#define CPC0_EPRCSR_E0NFE 0x80000000 +#define CPC0_EPRCSR_E1NFE 0x40000000 +#define CPC0_EPRCSR_E1RPP 0x00000080 +#define CPC0_EPRCSR_E0RPP 0x00000040 +#define CPC0_EPRCSR_E1ERP 0x00000020 +#define CPC0_EPRCSR_E0ERP 0x00000010 +#define CPC0_EPRCSR_E1PCI 0x00000002 +#define CPC0_EPRCSR_E0PCI 0x00000001 + +/* Defines for CPC0_BOOR Register */ +#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */ + +/* Defines for CPC0_PLLMR1 Register fields */ +#define PLL_ACTIVE 0x80000000 +#define CPC0_PLLMR1_SSCS 0x80000000 +#define PLL_RESET 0x40000000 +#define CPC0_PLLMR1_PLLR 0x40000000 + /* Feedback multiplier */ +#define PLL_FBKDIV 0x00F00000 +#define CPC0_PLLMR1_FBDV 0x00F00000 +#define PLL_FBKDIV_16 0x00000000 +#define PLL_FBKDIV_1 0x00100000 +#define PLL_FBKDIV_2 0x00200000 +#define PLL_FBKDIV_3 0x00300000 +#define PLL_FBKDIV_4 0x00400000 +#define PLL_FBKDIV_5 0x00500000 +#define PLL_FBKDIV_6 0x00600000 +#define PLL_FBKDIV_7 0x00700000 +#define PLL_FBKDIV_8 0x00800000 +#define PLL_FBKDIV_9 0x00900000 +#define PLL_FBKDIV_10 0x00A00000 +#define PLL_FBKDIV_11 0x00B00000 +#define PLL_FBKDIV_12 0x00C00000 +#define PLL_FBKDIV_13 0x00D00000 +#define PLL_FBKDIV_14 0x00E00000 +#define PLL_FBKDIV_15 0x00F00000 + /* Forward A divisor */ +#define PLL_FWDDIVA 0x00070000 +#define CPC0_PLLMR1_FWDVA 0x00070000 +#define PLL_FWDDIVA_8 0x00000000 +#define PLL_FWDDIVA_7 0x00010000 +#define PLL_FWDDIVA_6 0x00020000 +#define PLL_FWDDIVA_5 0x00030000 +#define PLL_FWDDIVA_4 0x00040000 +#define PLL_FWDDIVA_3 0x00050000 +#define PLL_FWDDIVA_2 0x00060000 +#define PLL_FWDDIVA_1 0x00070000 + /* Forward B divisor */ +#define PLL_FWDDIVB 0x00007000 +#define CPC0_PLLMR1_FWDVB 0x00007000 +#define PLL_FWDDIVB_8 0x00000000 +#define PLL_FWDDIVB_7 0x00001000 +#define PLL_FWDDIVB_6 0x00002000 +#define PLL_FWDDIVB_5 0x00003000 +#define PLL_FWDDIVB_4 0x00004000 +#define PLL_FWDDIVB_3 0x00005000 +#define PLL_FWDDIVB_2 0x00006000 +#define PLL_FWDDIVB_1 0x00007000 + /* PLL tune bits */ +#define PLL_TUNE_MASK 0x000003FF +#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ +#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ +#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ +#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ +#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ +#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ +#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ + +/* Defines for CPC0_PLLMR0 Register fields */ + /* CPU divisor */ +#define PLL_CPUDIV 0x00300000 +#define CPC0_PLLMR0_CCDV 0x00300000 +#define PLL_CPUDIV_1 0x00000000 +#define PLL_CPUDIV_2 0x00100000 +#define PLL_CPUDIV_3 0x00200000 +#define PLL_CPUDIV_4 0x00300000 + /* PLB divisor */ +#define PLL_PLBDIV 0x00030000 +#define CPC0_PLLMR0_CBDV 0x00030000 +#define PLL_PLBDIV_1 0x00000000 +#define PLL_PLBDIV_2 0x00010000 +#define PLL_PLBDIV_3 0x00020000 +#define PLL_PLBDIV_4 0x00030000 + /* OPB divisor */ +#define PLL_OPBDIV 0x00003000 +#define CPC0_PLLMR0_OPDV 0x00003000 +#define PLL_OPBDIV_1 0x00000000 +#define PLL_OPBDIV_2 0x00001000 +#define PLL_OPBDIV_3 0x00002000 +#define PLL_OPBDIV_4 0x00003000 + /* EBC divisor */ +#define PLL_EXTBUSDIV 0x00000300 +#define CPC0_PLLMR0_EPDV 0x00000300 +#define PLL_EXTBUSDIV_2 0x00000000 +#define PLL_EXTBUSDIV_3 0x00000100 +#define PLL_EXTBUSDIV_4 0x00000200 +#define PLL_EXTBUSDIV_5 0x00000300 + /* MAL divisor */ +#define PLL_MALDIV 0x00000030 +#define CPC0_PLLMR0_MPDV 0x00000030 +#define PLL_MALDIV_1 0x00000000 +#define PLL_MALDIV_2 0x00000010 +#define PLL_MALDIV_3 0x00000020 +#define PLL_MALDIV_4 0x00000030 + /* PCI divisor */ +#define PLL_PCIDIV 0x00000003 +#define CPC0_PLLMR0_PPFD 0x00000003 +#define PLL_PCIDIV_1 0x00000000 +#define PLL_PCIDIV_2 0x00000001 +#define PLL_PCIDIV_3 0x00000002 +#define PLL_PCIDIV_4 0x00000003 + +/* + *------------------------------------------------------------------------------- + * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, + * assuming a 33.3MHz input clock to the 405EP. + *------------------------------------------------------------------------------- + */ +#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \ + PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ + PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_2) +#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + +/* + * PLL Voltage Controlled Oscillator (VCO) definitions + * Maximum and minimum values (in MHz) for correct PLL operation. + */ +#define VCO_MIN 500 +#define VCO_MAX 1000 +#endif /* #if 0 */ #else /* #ifdef CONFIG_405EP */ /****************************************************************************** * Control @@ -578,6 +940,121 @@ /****************************************************************************** * Memory Access Layer ******************************************************************************/ +#if defined(CONFIG_405EZ) +#define MAL_DCR_BASE 0x380 +#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ +#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/ +#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ +#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ +#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/ +#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ +#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ +#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ +/* 0x08-0x0F Reserved */ +#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/ +#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ +#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ +#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ +/* 0x14-0x1F Reserved */ +#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */ +#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */ +#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */ +#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */ +#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */ +#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */ +#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */ +#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */ +#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */ +#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */ +#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */ +#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */ +#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */ +#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */ +#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */ +#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */ +#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */ +#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */ +#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */ +#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */ +#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */ +#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */ +#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */ +#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */ +#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */ +#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */ +#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */ +#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */ +#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */ +#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */ +#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */ +#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */ +#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */ +#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */ +#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */ +#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */ +#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */ +#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */ +#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */ +#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */ +#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */ +#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */ +#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */ +#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */ +#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */ +#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */ +#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */ +#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */ +#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */ +#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */ +#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */ +#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */ +#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */ +#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */ +#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */ +#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */ +#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */ +#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */ +#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */ +#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */ +#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */ +#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */ +#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */ +#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */ +#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ +#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ +#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ +#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */ +#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */ +#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */ +#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */ +#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ +#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */ +#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */ +#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */ +#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */ +#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */ +#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */ +#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */ +#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ +#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */ +#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */ +#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */ +#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */ +#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */ +#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */ +#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */ +#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ +#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */ +#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */ +#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */ +#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */ +#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */ +#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */ +#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */ + +#else /* !defined(CONFIG_405EZ) */ + #define MAL_DCR_BASE 0x180 #define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ #define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ @@ -598,6 +1075,7 @@ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ #define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#endif /* defined(CONFIG_405EZ) */ /*----------------------------------------------------------------------------- | IIC Register Offsets @@ -635,15 +1113,76 @@ /****************************************************************************** * On Chip Memory ******************************************************************************/ +#if defined(CONFIG_405EZ) +#define OCM_DCR_BASE 0x020 +#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */ +#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */ +#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */ +#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */ +#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */ +#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */ +#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */ +#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */ +#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */ +#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */ +#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */ +#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */ +#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/ +#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/ +#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/ +#else #define OCM_DCR_BASE 0x018 #define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ #define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ #define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ #define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ +#endif /* CONFIG_405EZ */ /****************************************************************************** * GPIO macro register defines ******************************************************************************/ +#if defined(CONFIG_405EZ) +/* Only the 405EZ has 2 GPIOs */ +#define GPIO_BASE 0xEF600700 +#define GPIO0_OR (GPIO_BASE+0x0) +#define GPIO0_TCR (GPIO_BASE+0x4) +#define GPIO0_OSRL (GPIO_BASE+0x8) +#define GPIO0_OSRH (GPIO_BASE+0xC) +#define GPIO0_TSRL (GPIO_BASE+0x10) +#define GPIO0_TSRH (GPIO_BASE+0x14) +#define GPIO0_ODR (GPIO_BASE+0x18) +#define GPIO0_IR (GPIO_BASE+0x1C) +#define GPIO0_RR1 (GPIO_BASE+0x20) +#define GPIO0_RR2 (GPIO_BASE+0x24) +#define GPIO0_RR3 (GPIO_BASE+0x28) +#define GPIO0_ISR1L (GPIO_BASE+0x30) +#define GPIO0_ISR1H (GPIO_BASE+0x34) +#define GPIO0_ISR2L (GPIO_BASE+0x38) +#define GPIO0_ISR2H (GPIO_BASE+0x3C) +#define GPIO0_ISR3L (GPIO_BASE+0x40) +#define GPIO0_ISR3H (GPIO_BASE+0x44) + +#define GPIO1_BASE 0xEF600800 +#define GPIO1_OR (GPIO1_BASE+0x0) +#define GPIO1_TCR (GPIO1_BASE+0x4) +#define GPIO1_OSRL (GPIO1_BASE+0x8) +#define GPIO1_OSRH (GPIO1_BASE+0xC) +#define GPIO1_TSRL (GPIO1_BASE+0x10) +#define GPIO1_TSRH (GPIO1_BASE+0x14) +#define GPIO1_ODR (GPIO1_BASE+0x18) +#define GPIO1_IR (GPIO1_BASE+0x1C) +#define GPIO1_RR1 (GPIO1_BASE+0x20) +#define GPIO1_RR2 (GPIO1_BASE+0x24) +#define GPIO1_RR3 (GPIO1_BASE+0x28) +#define GPIO1_ISR1L (GPIO1_BASE+0x30) +#define GPIO1_ISR1H (GPIO1_BASE+0x34) +#define GPIO1_ISR2L (GPIO1_BASE+0x38) +#define GPIO1_ISR2H (GPIO1_BASE+0x3C) +#define GPIO1_ISR3L (GPIO1_BASE+0x40) +#define GPIO1_ISR3H (GPIO1_BASE+0x44) + +#else /* !405EZ */ + #define GPIO_BASE 0xEF600700 #define GPIO0_OR (GPIO_BASE+0x0) #define GPIO0_TCR (GPIO_BASE+0x4) @@ -660,6 +1199,7 @@ #define GPIO0_ISR2H (GPIO_BASE+0x38) #define GPIO0_ISR2L (GPIO_BASE+0x3C) +#endif /* CONFIG_405EZ */ /* * Macro for accessing the indirect EBC register -- cgit v1.2.3