From aa646643b6bc250cb3a4966bf728876e0c10d329 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 6 Aug 2008 21:42:07 +0200 Subject: nand_spl: Support page-aligned read in nand_load, use chipselect Supporting page-aligned reads doesn't incure any sinificant overhead, just a small change in the algorithm. Also replace in_8 with readb, since there is no in_8 on ARM. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Scott Wood --- nand_spl/nand_boot.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) (limited to 'nand_spl') diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 81b4dfc54..16d128fc8 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -131,7 +131,7 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) /* * Read one byte */ - if (in_8(this->IO_ADDR_R) != 0xff) + if (readb(this->IO_ADDR_R) != 0xff) return 1; return 0; @@ -184,29 +184,33 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) return 0; } -static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst) +static int nand_load(struct mtd_info *mtd, unsigned int offs, + unsigned int uboot_size, uchar *dst) { - int block; - int blockcopy_count; - int page; + unsigned int block, lastblock; + unsigned int page; /* - * offs has to be aligned to a block address! + * offs has to be aligned to a page address! */ block = offs / CFG_NAND_BLOCK_SIZE; - blockcopy_count = 0; + lastblock = (offs + uboot_size - 1) / CFG_NAND_BLOCK_SIZE; + page = (offs % CFG_NAND_BLOCK_SIZE) / CFG_NAND_PAGE_SIZE; - while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) { + while (block <= lastblock) { if (!nand_is_bad_block(mtd, block)) { /* * Skip bad blocks */ - for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) { + while (page < CFG_NAND_PAGE_COUNT) { nand_read_page(mtd, block, page, dst); dst += CFG_NAND_PAGE_SIZE; + page++; } - blockcopy_count++; + page = 0; + } else { + lastblock++; } block++; @@ -235,12 +239,18 @@ void nand_boot(void) nand_chip.dev_ready = NULL; /* preset to NULL */ board_nand_init(&nand_chip); + if (nand_chip.select_chip) + nand_chip.select_chip(&nand_info, 0); + /* * Load U-Boot image from NAND into RAM */ ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE, (uchar *)CFG_NAND_U_BOOT_DST); + if (nand_chip.select_chip) + nand_chip.select_chip(&nand_info, -1); + /* * Jump to U-Boot image */ -- cgit v1.2.3