/* * (C) Copyright 2004 * IMMS, gGmbH * Thomas Elste * * Configuation settings for ModNET50 board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ #define CONFIG_NETARM /* it's a Netsiclicon NET+ARM */ #undef CONFIG_NETARM_NET40_REV2 /* it's a Net+40 Rev. 2 */ #undef CONFIG_NETARM_NET40_REV4 /* it's a Net+40 Rev. 4 */ #define CONFIG_NETARM_NET50 /* it's a Net+50 */ #define CONFIG_MODNET50 1 /* on an ModNET50 Board */ #undef CONFIG_USE_IRQ /* don't need them anymore */ /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers */ #define CONFIG_DRIVER_NETARMETH 1 /* * select serial console configuration */ #define CONFIG_NETARM_SERIAL #define CONFIG_SERIAL1 1 /* we use Serial line 1 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 38400 /* * BOOTP options */ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE /* * Command line configuration. */ #include #define CONFIG_CMD_JFFS2 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.30.2 #define CONFIG_SERVERIP 192.168.30.122 #define CONFIG_SYS_ETH_PHY_ADDR 0x100 #define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */ /*#define CONFIG_BOOTDELAY 10*/ /* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */ #define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" #define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K " \ "root=/dev/ram keepinitrd" #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "modnet50 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00500000 /* default load address */ #define CONFIG_SYS_HZ 900 /* decrementer freq: 2 kHz */ /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ #endif /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ #define PHYS_SDRAM_2 0x01000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */ #define PHYS_FLASH_1 0x10000000 /* Flash Bank #1 */ #define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip only, 16bit access) */ #define PHYS_FLASH_2 0x10200001 #define PHYS_FLASH_2_SIZE 0x00200000 #define CONFIG_NETARM_EEPROM /* #ifdef CONFIG_NETARM_EEPROM */ #define PHYS_NVRAM_1 0x20000000 /* EEPROM Bank #1 */ #define PHYS_NVRAM_SIZE 0x00002000 /* 8 KB */ /* #endif */ #define PHYS_EXT_1 0x30000000 /* Extensions Bank #1 */ #define PHYS_EXT_SIZE 0x01000000 /* 32 MB memory mapped I/O */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ #define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */ /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ /* environment settings */ #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_ADDR 0x1001C000 /* environment start address */ #define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ #define CONFIG_ENV_SIZE 0x4000 /* max size for environment */ /* * JFFS2 partitions * */ /* No command line, one static partition, whole device */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00080000 /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=modnet50-0" #define MTDPARTS_DEFAULT "mtdparts=modnet50-0:-@512k(jffs2)" */ #endif /* __CONFIG_H */