/* * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, * * Configuration settings for the Dave/DENX QongEVB-LITE board. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ #define CONFIG_QONG 1 #define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */ #define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers */ #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 /* FPGA */ #define CONFIG_QONG_FPGA 1 #define CONFIG_FPGA_BASE (CS1_BASE) #ifdef CONFIG_QONG_FPGA /* Ethernet */ #define CONFIG_DNET 1 #define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE) #define CONFIG_NET_MULTI 1 /* * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the * initial TFTP transfer, should the user wish one, significantly. */ #define CONFIG_ARP_TIMEOUT 200UL #endif /* CONFIG_QONG_FPGA */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition ***********************************************************/ #include #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NET #define CONFIG_CMD_MII #define CONFIG_CMD_JFFS2 /* * You can compile in a MAC address and your custom net settings by using * the following syntax. * * #define CONFIG_ETHADDR xx:xx:xx:xx:xx:xx * #define CONFIG_SERVERIP * #define CONFIG_IPADDR * #define CONFIG_GATEWAYIP * #define CONFIG_NETMASK */ #define CONFIG_BOOTDELAY 5 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ #define xstr(s) str(s) #define str(s) #s #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs}" \ " console=ttymxc0,${baudrate}\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "addmisc=setenv bootargs ${bootargs}\0" \ "uboot_addr=a0000000\0" \ "kernel_addr=a0080000\0" \ "ramdisk_addr=a0300000\0" \ "u-boot=qong/u-boot.bin\0" \ "kernel_addr_r=80800000\0" \ "hostname=qong\0" \ "bootfile=qong/uImage\0" \ "rootpath=/opt/eldk-4.2-arm/armVFP\0" \ "flash_self=run ramargs addip addtty addmtd addmisc;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ "bootm ${kernel_addr}\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ "run nfsargs addip addtty addmtd addmisc;" \ "bootm\0" \ "bootcmd=run flash_self\0" \ "load=tftp ${loadaddr} ${u-boot}\0" \ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ " +${filesize};cp.b ${fileaddr} " \ xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ "upd=run load update\0" \ /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on first 255MB of RAM */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0xff000000) #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_MISC_INIT_R 1 /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE CS0_BASE #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ /* max number of sectors on one chip */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Monitor at beginning of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) /* Address and size of Redundant Environment Sector */ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /*----------------------------------------------------------------------- * CFI FLASH driver setup */ /* Flash memory is CFI compliant */ #define CONFIG_SYS_FLASH_CFI 1 /* Use drivers/cfi_flash.c */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use buffered writes (~10x faster) */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use hardware sector protection */ #define CONFIG_SYS_FLASH_PROTECTION 1 /* * JFFS2 partitions */ #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=physmap-flash.0" #define MTDPARTS_DEFAULT \ "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \ "128k(env2),2560k(kernel),13m(ramdisk),-(user)" #endif /* __CONFIG_H */