summaryrefslogtreecommitdiff
path: root/board/Marvell/common/flash.c
blob: 3603372d0768e14bda8ea5fd30450657898badb4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
/*
 * (C) Copyright 2001
 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * flash.c - flash support for the 512k, 8bit boot flash
	and the 8MB 32bit extra flash on the DB64360
 *           most of this file was based on the existing U-Boot
 *           flash drivers.
 *
 * written or collected and sometimes rewritten by
 * Ingo Assmus <ingo.assmus@keymile.com>
 *
 */

#include <common.h>
#include <mpc8xx.h>
#include "../include/mv_gen_reg.h"
#include "../include/memory.h"
#include "intel_flash.h"

#define FLASH_ROM       0xFFFD	/* unknown flash type                   */
#define FLASH_RAM       0xFFFE	/* unknown flash type                   */
#define FLASH_MAN_UNKNOWN 0xFFFF0000

/* #define DEBUG */

/* Intel flash commands */
int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
int write_word_intel (bank_addr_t addr, bank_word_t value);

flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */

/*-----------------------------------------------------------------------
 * Functions
 */
static ulong flash_get_size (int portwidth, vu_long * addr,
			     flash_info_t * info);
static int write_word (flash_info_t * info, ulong dest, ulong data);
static void flash_get_offsets (ulong base, flash_info_t * info);

/*-----------------------------------------------------------------------
 */

unsigned long flash_init (void)
{
	unsigned int i;
	unsigned long size_b0 = 0, size_b1 = 0;
	unsigned long base, flash_size;

	/* Init: no FLASHes known */
	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
		flash_info[i].flash_id = FLASH_UNKNOWN;
	}

	/* the boot flash */
	base = CFG_FLASH_BASE;
	size_b0 =
		flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
				&flash_info[0]);

	printf ("[%ldkB@%lx] ", size_b0 / 1024, base);

	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
	}

	base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
/*	base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
	for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
		unsigned long size =
			flash_get_size (CFG_EXTRA_FLASH_WIDTH,
					(vu_long *) base, &flash_info[i]);

		printf ("[%ldMB@%lx] ", size >> 20, base);

		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
			if (i == 1) {
				printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b1, size_b1 << 20);
			}
			break;
		}
		size_b1 += size;
		base += size;
	}

	flash_size = size_b0 + size_b1;
	return flash_size;
}

/*-----------------------------------------------------------------------
 */
static void flash_get_offsets (ulong base, flash_info_t * info)
{
	int i;
	int sector_size;

	if (!info->sector_count)
		return;

	/* set up sector start address table */
	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_AM040:
	case FLASH_28F128J3A:
	case FLASH_28F640J3A:
	case FLASH_RAM:
		/* this chip has uniformly spaced sectors */
		sector_size = info->size / info->sector_count;
		for (i = 0; i < info->sector_count; i++)
			info->start[i] = base + (i * sector_size);
		break;
	default:
		if (info->flash_id & FLASH_BTYPE) {
			/* set sector offsets for bottom boot block type    */
			info->start[0] = base + 0x00000000;
			info->start[1] = base + 0x00008000;
			info->start[2] = base + 0x0000C000;
			info->start[3] = base + 0x00010000;
			for (i = 4; i < info->sector_count; i++) {
				info->start[i] =
					base + (i * 0x00020000) - 0x00060000;
			}
		} else {
			/* set sector offsets for top boot block type               */
			i = info->sector_count - 1;
			info->start[i--] = base + info->size - 0x00008000;
			info->start[i--] = base + info->size - 0x0000C000;
			info->start[i--] = base + info->size - 0x00010000;
			for (; i >= 0; i--) {
				info->start[i] = base + i * 0x00020000;
			}
		}
	}
}

/*-----------------------------------------------------------------------
 */
void flash_print_info (flash_info_t * info)
{
	int i;

	if (info->flash_id == FLASH_UNKNOWN) {
		printf ("missing or unknown FLASH type\n");
		return;
	}

	switch (info->flash_id & FLASH_VENDMASK) {
	case FLASH_MAN_STM:
		printf ("STM ");
		break;
	case FLASH_MAN_AMD:
		printf ("AMD ");
		break;
	case FLASH_MAN_FUJ:
		printf ("FUJITSU ");
		break;
	case FLASH_MAN_INTEL:
		printf ("INTEL ");
		break;
	default:
		printf ("Unknown Vendor ");
		break;
	}

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_AM040:
		printf ("AM29LV040B (4 Mbit, bottom boot sect)\n");
		break;
	case FLASH_AM400B:
		printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
		break;
	case FLASH_AM400T:
		printf ("AM29LV400T (4 Mbit, top boot sector)\n");
		break;
	case FLASH_AM800B:
		printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
		break;
	case FLASH_AM800T:
		printf ("AM29LV800T (8 Mbit, top boot sector)\n");
		break;
	case FLASH_AM160B:
		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
		break;
	case FLASH_AM160T:
		printf ("AM29LV160T (16 Mbit, top boot sector)\n");
		break;
	case FLASH_AM320B:
		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
		break;
	case FLASH_AM320T:
		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
		break;
	case FLASH_28F640J3A:
		printf ("28F640J3A (64 Mbit)\n");
		break;
	case FLASH_28F128J3A:
		printf ("28F128J3A (128 Mbit)\n");
		break;
	case FLASH_ROM:
		printf ("ROM\n");
		break;
	case FLASH_RAM:
		printf ("RAM\n");
		break;
	default:
		printf ("Unknown Chip Type\n");
		break;
	}

	if ((info->size >> 20) > 0) {
		printf ("  Size: %ld MB in %d Sectors\n",
			info->size >> 20, info->sector_count);
	} else {
		printf ("  Size: %ld kB in %d Sectors\n",
			info->size >> 10, info->sector_count);
	}

	printf ("  Sector Start Addresses:");
	for (i = 0; i < info->sector_count; ++i) {
		if ((i % 5) == 0)
			printf ("\n   ");
		printf (" %08lX%s",
			info->start[i], info->protect[i] ? " (RO)" : "     ");
	}
	printf ("\n");
	return;
}

/*-----------------------------------------------------------------------
 */


/*-----------------------------------------------------------------------
 */

/*
 * The following code cannot be run from FLASH!
 */

static inline void flash_cmd (int width, volatile unsigned char *addr,
			      int offset, unsigned char cmd)
{
	/* supports 1x8, 1x16, and 2x16 */
	/* 2x8 and 4x8 are not supported */
	if (width == 4) {
		/* assuming chips are in 16 bit mode */
		/* 2x16 */
		unsigned long cmd32 = (cmd << 16) | cmd;

		*(volatile unsigned long *) (addr + offset * 2) = cmd32;
	} else {
		/* 1x16 or 1x8 */
		*(volatile unsigned char *) (addr + offset) = cmd;
	}
}

static ulong
flash_get_size (int portwidth, vu_long * addr, flash_info_t * info)
{
	short i;
	volatile unsigned char *caddr = (unsigned char *) addr;
	volatile unsigned short *saddr = (unsigned short *) addr;
	volatile unsigned long *laddr = (unsigned long *) addr;
	char old[2], save;
	ulong id = 0, manu = 0, base = (ulong) addr;

#ifdef DEBUG
	printf ("%s: enter\n", __FUNCTION__);
#endif
	info->portwidth = portwidth;

	save = *caddr;

	flash_cmd (portwidth, caddr, 0, 0xf0);
	flash_cmd (portwidth, caddr, 0, 0xf0);

	udelay (10);

	old[0] = caddr[0];
	old[1] = caddr[1];


	if (old[0] != 0xf0) {
		flash_cmd (portwidth, caddr, 0, 0xf0);
		flash_cmd (portwidth, caddr, 0, 0xf0);

		udelay (10);

		if (*caddr == 0xf0) {
			/* this area is ROM */
			*caddr = save;
			info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
			info->sector_count = 8;
			info->size = 0x80000;
			flash_get_offsets (base, info);
			return info->size;
		}
	} else {
		*caddr = 0;

		udelay (10);

		if (*caddr == 0) {
			/* this area is RAM */
			*caddr = save;
			info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN;
			info->sector_count = 8;
			info->size = 0x80000;
			flash_get_offsets (base, info);
			return info->size;
		}
		flash_cmd (portwidth, caddr, 0, 0xf0);

		udelay (10);
	}

	/* Write auto select command: read Manufacturer ID */
	flash_cmd (portwidth, caddr, 0x555, 0xAA);
	flash_cmd (portwidth, caddr, 0x2AA, 0x55);
	flash_cmd (portwidth, caddr, 0x555, 0x90);

	udelay (10);

	if ((caddr[0] == old[0]) && (caddr[1] == old[1])) {

		/* this area is ROM */
		info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
		info->sector_count = 8;
		info->size = 0x80000;
		flash_get_offsets (base, info);
		return info->size;
#ifdef DEBUG
	} else {
		printf ("%px%d: %02x:%02x -> %02x:%02x\n",
			caddr, portwidth, old[0], old[1], caddr[0], caddr[1]);
#endif
	}

	switch (portwidth) {
	case 1:
		manu = caddr[0];
		manu |= manu << 16;
		id = caddr[1];
		break;
	case 2:
		manu = saddr[0];
		manu |= manu << 16;
		id = saddr[1];
		id |= id << 16;
		break;
	case 4:
		manu = laddr[0];
		id = laddr[1];
		break;
	}

#ifdef DEBUG
	flash_cmd (portwidth, caddr, 0, 0xf0);

	printf ("\n%08lx:%08lx:%08lx\n", base, manu, id);
	printf ("%08lx %08lx %08lx %08lx\n",
		laddr[0], laddr[1], laddr[2], laddr[3]);
#endif

	switch (manu) {
	case STM_MANUFACT:
		info->flash_id = FLASH_MAN_STM;
		break;
	case AMD_MANUFACT:
		info->flash_id = FLASH_MAN_AMD;
		break;
	case FUJ_MANUFACT:
		info->flash_id = FLASH_MAN_FUJ;
		break;
	case INTEL_MANUFACT:
		info->flash_id = FLASH_MAN_INTEL;
		break;
	default:
		flash_cmd (portwidth, caddr, 0, 0xf0);

		printf ("Unknown Mfr [%08lx]:%08lx\n", manu, id);
		info->flash_id = FLASH_UNKNOWN;
		info->sector_count = 0;
		info->size = 0;
		return (0);	/* no or unknown flash  */
	}

	switch (id) {
	case AMD_ID_LV400T:
		info->flash_id += FLASH_AM400T;
		info->sector_count = 11;
		info->size = 0x00100000;
		info->chipwidth = 1;
		break;		/* => 1 MB      */

	case AMD_ID_LV400B:
		info->flash_id += FLASH_AM400B;
		info->sector_count = 11;
		info->size = 0x00100000;
		info->chipwidth = 1;
		break;		/* => 1 MB      */

	case AMD_ID_LV800T:
		info->flash_id += FLASH_AM800T;
		info->sector_count = 19;
		info->size = 0x00200000;
		info->chipwidth = 1;
		break;		/* => 2 MB      */

	case AMD_ID_LV800B:
		info->flash_id += FLASH_AM800B;
		info->sector_count = 19;
		info->size = 0x00200000;
		info->chipwidth = 1;
		break;		/* => 2 MB      */

	case AMD_ID_LV160T:
		info->flash_id += FLASH_AM160T;
		info->sector_count = 35;
		info->size = 0x00400000;
		info->chipwidth = 1;
		break;		/* => 4 MB      */

	case AMD_ID_LV160B:
		info->flash_id += FLASH_AM160B;
		info->sector_count = 35;
		info->size = 0x00400000;
		info->chipwidth = 1;
		break;		/* => 4 MB      */
#if 0				/* enable when device IDs are available */
	case AMD_ID_LV320T:
		info->flash_id += FLASH_AM320T;
		info->sector_count = 67;
		info->size = 0x00800000;
		break;		/* => 8 MB      */

	case AMD_ID_LV320B:
		info->flash_id += FLASH_AM320B;
		info->sector_count = 67;
		info->size = 0x00800000;
		break;		/* => 8 MB      */
#endif
	case AMD_ID_LV040B:
		info->flash_id += FLASH_AM040;
		info->sector_count = 8;
		info->size = 0x80000;
		info->chipwidth = 1;
		break;		/* => 512 kB    */

	case INTEL_ID_28F640J3A:
		info->flash_id += FLASH_28F640J3A;
		info->sector_count = 64;
		info->size = 128 * 1024 * 64;	/* 128kbytes x 64 blocks */
		info->chipwidth = 2;
		if (portwidth == 4)
			info->size *= 2;	/* 2x16 */
		break;

	case INTEL_ID_28F128J3A:
		info->flash_id += FLASH_28F128J3A;
		info->sector_count = 128;
		info->size = 128 * 1024 * 128;	/* 128kbytes x 128 blocks */
		info->chipwidth = 2;
		if (portwidth == 4)
			info->size *= 2;	/* 2x16 */
		break;

	default:
		flash_cmd (portwidth, caddr, 0, 0xf0);

		printf ("Unknown id %lx:[%lx]\n", manu, id);
		info->flash_id = FLASH_UNKNOWN;
		info->chipwidth = 1;
		return (0);	/* => no or unknown flash */

	}

	flash_get_offsets (base, info);


	/* check for protected sectors */
	for (i = 0; i < info->sector_count; i++) {
		/* read sector protection at sector address, (A7 .. A0)=0x02 */
		/* D0 = 1 if protected */
		caddr = (volatile unsigned char *) (info->start[i]);
		saddr = (volatile unsigned short *) (info->start[i]);
		laddr = (volatile unsigned long *) (info->start[i]);
		if (portwidth == 1)
			info->protect[i] = caddr[2] & 1;
		else if (portwidth == 2)
			info->protect[i] = saddr[2] & 1;
		else
			info->protect[i] = laddr[2] & 1;
	}

	/*
	 * Prevent writes to uninitialized FLASH.
	 */
	if (info->flash_id != FLASH_UNKNOWN) {
		caddr = (volatile unsigned char *) info->start[0];

		flash_cmd (portwidth, caddr, 0, 0xF0);	/* reset bank */
	}

	return (info->size);
}

int flash_erase (flash_info_t * info, int s_first, int s_last)
{
	volatile unsigned char *addr = (uchar *) (info->start[0]);
	int flag, prot, sect, l_sect;
	ulong start, now, last;

/* modified to support 2x16 Intel flash */
/* Note that the code will not exit on a flash erasure error or timeout */
/* but will print and error message and continue processing sectors */
/* until they are all erased. */
/* 10-16-2002 P. Marchese */
	ulong mask;
	int timeout;

	if (info->portwidth == 4)
/*		{
		printf ("- Warning: erasing of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
		return 1;
		}*/
	{
		/* make sure it's Intel flash */
		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
			/* yup! it's an Intel flash */
			/* is it 16-bits wide? */
			if (info->chipwidth == 2) {
				/* yup! it's 16-bits wide */
				/* are there any sectors to process? */
				if ((s_first < 0) || (s_first > s_last)) {
					printf ("Error:  There are no sectors to erase\n");
					printf ("Either sector %d is less than zero\n", s_first);
					printf ("or sector %d is greater than sector %d\n", s_first, s_last);
					return 1;
				}
				/* check for protected sectors */
				prot = 0;
				for (sect = s_first; sect <= s_last; ++sect)
					if (info->protect[sect])
						prot++;
				/* if variable "prot" is nonzero, there are protected sectors */
				if (prot)
					printf ("- Warning: %d protected sectors will not be erased!\n", prot);
				/* reset the flash */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RST);
				/* Disable interrupts which might cause a timeout here */
				flag = disable_interrupts ();
				/* Clear the status register */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_CLR_STAT);
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RST);
				/* Start erase on unprotected sectors */
				for (sect = s_first; sect <= s_last; sect++) {
					/* is the sector unprotected? */
					if (info->protect[sect] == 0) {	/* not protected */
						/* issue the single block erase command, 0x20 */
						flash_cmd (info->portwidth,
							   (volatile unsigned
							    char *) info->
							   start[sect], 0,
							   CHIP_CMD_ERASE1);
						/* issue the erase confirm command, 0xD0 */
						flash_cmd (info->portwidth,
							   (volatile unsigned
							    char *) info->
							   start[sect], 0,
							   CHIP_CMD_ERASE2);
						l_sect = sect;
						/* re-enable interrupts if necessary */
						if (flag)
							enable_interrupts ();
						/* poll for erasure completion */
						/* put flash into read status mode by writing 0x70 to it */
						flash_cmd (info->portwidth,
							   addr, 0,
							   CHIP_CMD_RD_STAT);
						/* setup the status register mask */
						mask = CHIP_STAT_RDY |
							(CHIP_STAT_RDY << 16);
						/* init. the timeout counter */
						start = get_timer (0);
						/* keep looping while the flash is not ready */
						/* exit the loop by timing out or the flash */
						/* becomes ready again */
						timeout = 0;
						while ((*
							(volatile unsigned
							 long *) info->
							start[sect] & mask) !=
						       mask) {
							/* has the timeout limit been reached? */
							if (get_timer (start)
							    >
							    CFG_FLASH_ERASE_TOUT)
							{
								/* timeout limit reached */
								printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
								printf ("Continuing with next sector\n");
								timeout = 1;
								goto timed_out_error;
							}
							/* put flash into read status mode by writing 0x70 to it */
							flash_cmd (info->
								   portwidth,
								   addr, 0,
								   CHIP_CMD_RD_STAT);
						}
						/* did we timeout? */
					      timed_out_error:if (timeout == 0)
						{
							/* didn't timeout, so check the status register */
							/* create the status mask to check for errors */
							mask = CHIP_STAT_ECLBS;
							mask = mask | (mask <<
								       16);
							/* put flash into read status mode by writing 0x70 to it */
							flash_cmd (info->
								   portwidth,
								   addr, 0,
								   CHIP_CMD_RD_STAT);
							/* are there any errors? */
							if ((*
							     (volatile
							      unsigned long *)
							     info->
							     start[sect] &
							     mask) != 0) {
								/* We got an erasure error */
								printf ("Flash erasure error at address 0x%08lx\n", info->start[sect]);
								printf ("Continuing with next sector\n");
								/* reset the flash */
								flash_cmd
									(info->
									 portwidth,
									 addr,
									 0,
									 CHIP_CMD_RST);
							}
						}
						/* erasure completed without errors */
						/* reset the flash */
						flash_cmd (info->portwidth,
							   addr, 0,
							   CHIP_CMD_RST);
					}	/* end if not protected */
				}	/* end for loop */
				printf ("Flash erasure done\n");
				return 0;
			} else {
				/* The Intel flash is not 16-bit wide */
				/* print and error message and return */
				/* NOTE: you can add routines here to handle other size flash */
				printf ("Error: Intel flash device is only %d-bits wide\n", info->chipwidth * 8);
				printf ("The erasure code only handles Intel 16-bit wide flash memory\n");
				return 1;
			}
		} else {
			/* Not Intel flash so return an error as a write timeout */
			/* NOTE: if it's another type flash, stick its routine here */
			printf ("Error: The flash device is not Intel type\n");
			printf ("The erasure code only supports Intel flash in a 32-bit port width\n");
			return 1;
		}
	}

	/* end 32-bit wide flash code */
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
		return 1;	/* Rom can not be erased */
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {	/* RAM just copy 0s to RAM */
		for (sect = s_first; sect <= s_last; sect++) {
			int sector_size = info->size / info->sector_count;

			addr = (uchar *) (info->start[sect]);
			memset ((void *) addr, 0, sector_size);
		}
		return 0;
	}

	if ((s_first < 0) || (s_first > s_last)) {
		if (info->flash_id == FLASH_UNKNOWN) {
			printf ("- missing\n");
		} else {
			printf ("- no sectors to erase\n");
		}
		return 1;
	}

	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {	/* Intel works spezial */
		return flash_erase_intel (info,
					  (unsigned short) s_first,
					  (unsigned short) s_last);
	}
#if 0
	if ((info->flash_id == FLASH_UNKNOWN) ||	/* Flash is unknown to PPCBoot */
	    (info->flash_id > FLASH_AMD_COMP)) {
		printf ("Can't erase unknown flash type %08lx - aborted\n",
			info->flash_id);
		return 1;
	}
#endif

	prot = 0;
	for (sect = s_first; sect <= s_last; ++sect) {
		if (info->protect[sect]) {
			prot++;
		}
	}

	if (prot) {
		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
	} else {
		printf ("\n");
	}

	l_sect = -1;

	/* Disable interrupts which might cause a timeout here */
	flag = disable_interrupts ();

	flash_cmd (info->portwidth, addr, 0x555, 0xAA);	/* start erase routine */
	flash_cmd (info->portwidth, addr, 0x2AA, 0x55);
	flash_cmd (info->portwidth, addr, 0x555, 0x80);
	flash_cmd (info->portwidth, addr, 0x555, 0xAA);
	flash_cmd (info->portwidth, addr, 0x2AA, 0x55);

	/* Start erase on unprotected sectors */
	for (sect = s_first; sect <= s_last; sect++) {
		if (info->protect[sect] == 0) {	/* not protected */
			addr = (uchar *) (info->start[sect]);
			flash_cmd (info->portwidth, addr, 0, 0x30);
			l_sect = sect;
		}
	}

	/* re-enable interrupts if necessary */
	if (flag)
		enable_interrupts ();

	/* wait at least 80us - let's wait 1 ms */
	udelay (1000);

	/*
	 * We wait for the last triggered sector
	 */
	if (l_sect < 0)
		goto DONE;

	start = get_timer (0);
	last = start;
	addr = (volatile unsigned char *) (info->start[l_sect]);
	/* broken for 2x16: TODO */
	while ((addr[0] & 0x80) != 0x80) {
		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
			printf ("Timeout\n");
			return 1;
		}
		/* show that we're waiting */
		if ((now - last) > 1000) {	/* every second */
			putc ('.');
			last = now;
		}
	}

      DONE:
	/* reset to read mode */
	addr = (volatile unsigned char *) info->start[0];
	flash_cmd (info->portwidth, addr, 0, 0xf0);
	flash_cmd (info->portwidth, addr, 0, 0xf0);

	printf (" done\n");
	return 0;
}

/*-----------------------------------------------------------------------
 * Copy memory to flash, returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */

/* broken for 2x16: TODO */
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
	ulong cp, wp, data;
	int i, l, rc;

/* Commented out since the below code should work for 32-bit(2x 16 flash) */
/* 10-16-2002 P. Marchese */
/*	if(info->portwidth==4) return 1; */
/*	if(info->portwidth==4) {
		printf ("- Warning: writting of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
		return 1;
		}*/

	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
		return 0;
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
		memcpy ((void *) addr, src, cnt);
		return 0;
	}

	wp = (addr & ~3);	/* get lower word aligned address */

	/*
	 * handle unaligned start bytes
	 */
	if ((l = addr - wp) != 0) {
		data = 0;
		for (i = 0, cp = wp; i < l; ++i, ++cp) {
			data = (data << 8) | (*(uchar *) cp);
		}
		for (; i < 4 && cnt > 0; ++i) {
			data = (data << 8) | *src++;
			--cnt;
			++cp;
		}
		for (; cnt == 0 && i < 4; ++i, ++cp) {
			data = (data << 8) | (*(uchar *) cp);
		}

		if ((rc = write_word (info, wp, data)) != 0) {
			return (rc);
		}
		wp += 4;
	}

	/*
	 * handle word aligned part
	 */
	while (cnt >= 4) {
		data = 0;
		for (i = 0; i < 4; ++i) {
			data = (data << 8) | *src++;
		}
		if ((rc = write_word (info, wp, data)) != 0) {
			return (rc);
		}
		wp += 4;
		cnt -= 4;
	}

	if (cnt == 0) {
		return (0);
	}

	/*
	 * handle unaligned tail bytes
	 */
	data = 0;
	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
		data = (data << 8) | *src++;
		--cnt;
	}
	for (; i < 4; ++i, ++cp) {
		data = (data << 8) | (*(uchar *) cp);
	}

	return (write_word (info, wp, data));
}

/*-----------------------------------------------------------------------
 * Write a word to Flash, returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */
/* broken for 2x16: TODO */
static int write_word (flash_info_t * info, ulong dest, ulong data)
{
	volatile unsigned char *addr = (uchar *) (info->start[0]);
	ulong start;
	int flag, i;
	ulong mask;

/* modified so that it handles 32-bit(2x16 Intel flash programming */
/* 10-16-2002 P. Marchese */

	if (info->portwidth == 4)
/*		{
		printf ("- Warning: writting of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
		return 1;
		}*/
	{
		/* make sure it's Intel flash */
		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
			/* yup! it's an Intel flash */
			/* is it 16-bits wide? */
			if (info->chipwidth == 2) {
				/* yup! it's 16-bits wide */
				/* so we know how to program it */
				/* reset the flash */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RST);
				/* Disable interrupts which might cause a timeout here */
				flag = disable_interrupts ();
				/* Clear the status register */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_CLR_STAT);
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RST);
				/* 1st cycle of word/byte program */
				/* write 0x40 to the location to program */
				flash_cmd (info->portwidth, (uchar *) dest, 0,
					   CHIP_CMD_PROG);
				/* 2nd cycle of word/byte program */
				/* write the data to the destination address */
				*(ulong *) dest = data;
				/* re-enable interrupts if necessary */
				if (flag)
					enable_interrupts ();
				/* setup the status register mask */
				mask = CHIP_STAT_RDY | (CHIP_STAT_RDY << 16);
				/* put flash into read status mode by writing 0x70 to it */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RD_STAT);
				/* init. the timeout counter */
				start = get_timer (0);
				/* keep looping while the flash is not ready */
				/* exit the loop by timing out or the flash */
				/* becomes ready again */
/* 11-13-2002 Paul Marchese */
/* modified while loop conditional statement */
/* because we were always timing out.  */
/* there is a type mismatch, "addr[0]" */
/* returns a byte but "mask" is a 32-bit value */
				while ((*(volatile unsigned long *) info->
					start[0] & mask) != mask)
/* original code */
/* while (addr[0] & mask) != mask) */
				{
					/* has the timeout limit been reached? */
					if (get_timer (start) >
					    CFG_FLASH_WRITE_TOUT) {
						/* timeout limit reached */
						printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
						/* reset the flash */
						flash_cmd (info->portwidth,
							   addr, 0,
							   CHIP_CMD_RST);
						return (1);
					}
					/* put flash into read status mode by writing 0x70 to it */
					flash_cmd (info->portwidth, addr, 0,
						   CHIP_CMD_RD_STAT);
				}
				/* flash is ready, so check the status */
				/* create the status mask to check for errors */
				mask = CHIP_STAT_DPS | CHIP_STAT_VPPS |
					CHIP_STAT_PSLBS;
				mask = mask | (mask << 16);
				/* put flash into read status mode by writing 0x70 to it */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RD_STAT);
				/* are there any errors? */
				if ((addr[0] & mask) != 0) {
					/* We got a one of the following errors: */
					/* Voltage range, Device protect, or programming */
					/* return the error as a device timeout */
					/* put flash into read status mode by writing 0x70 to it */
					flash_cmd (info->portwidth, addr, 0,
						   CHIP_CMD_RD_STAT);
					printf ("Flash programming error at address 0x%08lx\n", dest);
					printf ("Flash status register contains 0x%08lx\n", (unsigned long) addr[0]);
					/* reset the flash */
					flash_cmd (info->portwidth, addr, 0,
						   CHIP_CMD_RST);
					return 1;
				}
				/* write completed without errors */
				/* reset the flash */
				flash_cmd (info->portwidth, addr, 0,
					   CHIP_CMD_RST);
				return 0;
			} else {
				/* it's not 16-bits wide, so return an error as a write timeout */
				/* NOTE: you can add routines here to handle other size flash */
				printf ("Error: Intel flash device is only %d-bits wide\n", info->chipwidth * 8);
				printf ("The write code only handles Intel 16-bit wide flash memory\n");
				return 1;
			}
		} else {
			/* not Intel flash so return an error as a write timeout */
			/* NOTE: if it's another type flash, stick its routine here */
			printf ("Error: The flash device is not Intel type\n");
			printf ("The code only supports Intel flash in a 32-bit port width\n");
			return 1;
		}
	}

	/* end of 32-bit flash code */
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
		return 1;
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
		*(unsigned long *) dest = data;
		return 0;
	}
	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
		unsigned short low = data & 0xffff;
		unsigned short hi = (data >> 16) & 0xffff;
		int ret = write_word_intel ((bank_addr_t) dest, hi);

		if (!ret)
			ret = write_word_intel ((bank_addr_t) (dest + 2),
						low);

		return ret;
	}

	/* Check if Flash is (sufficiently) erased */
	if ((*((vu_long *) dest) & data) != data) {
		return (2);
	}
	/* Disable interrupts which might cause a timeout here */
	flag = disable_interrupts ();

	/* first, perform an unlock bypass command to speed up flash writes */
	addr[0x555] = 0xAA;
	addr[0x2AA] = 0x55;
	addr[0x555] = 0x20;

	/* write each byte out */
	for (i = 0; i < 4; i++) {
		char *data_ch = (char *) &data;

		addr[0] = 0xA0;
		*(((char *) dest) + i) = data_ch[i];
		udelay (10);	/* XXX */
	}

	/* we're done, now do an unlock bypass reset */
	addr[0] = 0x90;
	addr[0] = 0x00;

	/* re-enable interrupts if necessary */
	if (flag)
		enable_interrupts ();

	/* data polling for D7 */
	start = get_timer (0);
	while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
			return (1);
		}
	}
	return (0);
}