summaryrefslogtreecommitdiff
path: root/drivers/net/sk98lin/h/xmac_ii.h
blob: 09e21d68a4ebcf503f11afb09ea6c4b557ec88b3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
/******************************************************************************
 *
 * Name:	xmac_ii.h
 * Project:	GEnesis, PCI Gigabit Ethernet Adapter
 * Version:	$Revision: 1.46 $
 * Date:	$Date: 2003/01/28 09:47:45 $
 * Purpose:	Defines and Macros for Gigabit Ethernet Controller
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	(C)Copyright 1998-2003 SysKonnect GmbH.
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

/******************************************************************************
 *
 * History:
 *
 *	$Log: xmac_ii.h,v $
 *	Revision 1.46  2003/01/28 09:47:45  rschmidt
 *	Added defines for copper MDI/MDIX configuration
 *	Added defines for LED Control Register
 *	Editorial changes
 *
 *	Revision 1.45  2002/12/10 14:35:13  rschmidt
 *	Corrected defines for Extended PHY Specific Control
 *	Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific)
 *
 *	Revision 1.44  2002/12/09 14:58:41  rschmidt
 *	Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature)
 *	Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask
 *
 *	Revision 1.43  2002/12/05 10:14:45  rschmidt
 *	Added define for GMAC's Half Duplex Burst Mode
 *	Added define for Rx GMAC FIFO Flush Mask (default)
 *
 *	Revision 1.42  2002/11/12 16:48:19  rschmidt
 *	Added defines for Cable Diagnostic Register (GPHY)
 *	Editorial changes
 *
 *	Revision 1.41  2002/10/21 11:20:22  rschmidt
 *	Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR
 *	Editorial changes
 *
 *	Revision 1.40  2002/10/14 14:54:14  rschmidt
 *	Added defines for GPHY Specific Status and GPHY Interrupt Status
 *	Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK
 *	Editorial changes
 *
 *	Revision 1.39  2002/10/10 15:53:44  mkarl
 *	added some bit definitions for link speed status and LED's
 *
 *	Revision 1.38  2002/08/21 16:23:46  rschmidt
 *	Added defines for PHY Specific Ctrl Reg
 *	Editorial changes
 *
 *	Revision 1.37  2002/08/16 14:50:33  rschmidt
 *	Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only)
 *	Changed define PHY_M_DEF_MSK for GPHY IRQ Mask
 *	Editorial changes
 *
 *	Revision 1.36  2002/08/12 13:21:10  rschmidt
 *	Added defines for different Broadcom PHY Ids
 *
 *	Revision 1.35  2002/08/08 15:58:01  rschmidt
 *	Added defines for Manual LED Override register (YUKON)
 *	Editorial changes
 *
 *	Revision 1.34  2002/07/31 17:23:36  rwahl
 *	Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR).
 *
 *	Revision 1.33  2002/07/23 16:03:37  rschmidt
 *	Added defines for GPHY registers
 *	Editorial changes
 *
 *	Revision 1.32  2002/07/15 18:14:37  rwahl
 *	Added GMAC MIB counters definitions.
 *	Editorial changes.
 *
 *	Revision 1.31  2002/07/15 15:42:50  rschmidt
 *	Removed defines from PHY specific reg. which are
 *	common to all PHYs
 *	Added defines for GMAC MIB Counters
 *	Editorial changes
 *
 *	Revision 1.30  2002/06/05 08:22:12  rschmidt
 *	Changed defines for GMAC Rx Control Register and Rx Status
 *	Editorial changes
 *
 *	Revision 1.29  2002/04/25 11:43:56  rschmidt
 *	Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res.
 *	Added new registers and defines for YUKON (GMAC, GPHY)
 *	Added Receive Frame Status Encoding for YUKON
 *	Editorial changes
 *
 *	Revision 1.28  2000/11/09 12:32:49  rassmann
 *	Renamed variables.
 *
 *	Revision 1.27  2000/05/17 11:00:46  malthoff
 *	Add bit for enable/disable power management in BCOM chip.
 *
 *	Revision 1.26  1999/11/22 14:03:00  cgoos
 *	Changed license header to GPL.
 *
 *	Revision 1.25  1999/08/12 19:19:38  malthoff
 *	Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet.
 *
 *	Revision 1.24  1999/07/30 11:27:21  cgoos
 *	Fixed a missing end-of-comment.
 *
 *	Revision 1.23  1999/07/30 07:03:31  malthoff
 *	Cut some long comments.
 *	Correct the XMAC PHY ID definitions.
 *
 *	Revision 1.22  1999/05/19 07:33:18  cgoos
 *	Changes for 1000Base-T.
 *
 *	Revision 1.21  1999/03/25 07:46:11  malthoff
 *	Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers.
 *
 *	Revision 1.20  1999/03/12 13:36:09  malthoff
 *	Remove __STDC__.
 *
 *	Revision 1.19  1998/12/10 12:22:54  gklug
 *	fix: RX_PAGE must be in interrupt mask
 *
 *	Revision 1.18  1998/12/10 10:36:36  gklug
 *	fix: swap of pause bits
 *
 *	Revision 1.17  1998/11/18 13:21:45  gklug
 *	fix: Default interrupt mask
 *
 *	Revision 1.16  1998/10/29 15:53:21  gklug
 *	fix: Default mask uses ASS (GP0) signal
 *
 *	Revision 1.15  1998/10/28 13:52:52  malthoff
 *	Add new bits in RX_CMD register.
 *
 *	Revision 1.14  1998/10/19 15:34:53  gklug
 *	fix: typos
 *
 *	Revision 1.13  1998/10/14 07:19:03  malthoff
 *	bug fix: Every define which describes bit 31
 *	must be declared as unsigned long 'UL'.
 *	fix bit definitions of PHY_AN_RFB and PHY_AN_PAUSE.
 *	Remove ANP defines. Rework the RFB defines.
 *
 *	Revision 1.12  1998/10/14 06:22:44  cgoos
 *	Changed shifted constant to ULONG.
 *
 *	Revision 1.11  1998/10/14 05:43:26  gklug
 *	add: shift pause coding
 *	fix: PAUSE bits definition
 *
 *	Revision 1.10  1998/10/13 09:19:21  malthoff
 *	Again change XMR_FS_ANY_ERR because of new info from XaQti.
 *
 *	Revision 1.9  1998/10/09 07:58:30  malthoff
 *	Add XMR_FS_FCS_ERR to XMR_FS_ANY_ERR.
 *
 *	Revision 1.8  1998/10/09 07:18:17  malthoff
 *	bug fix of a bug fix: XM_PAUSE_MODE and XM_DEF_MODE
 *	are not inverted! Bug XM_DEF_MSK is inverted.
 *
 *	Revision 1.7  1998/10/05 08:04:32  malthoff
 *	bug fix: XM_PAUSE_MODE and XM_DEF_MODE
 *	must be inverted declarations.
 *
 *	Revision 1.6  1998/09/28 13:38:18  malthoff
 *	Add default modes and masks XM_DEF_MSK,
 *	XM_PAUSE_MODE and XM_DEF_MODE
 *
 *	Revision 1.5  1998/09/16 14:42:04  malthoff
 *	Bug Fix: XM_GP_PORT is a 32 bit (not a 16 bit) register.
 *
 *	Revision 1.4  1998/08/20 14:59:47  malthoff
 *	Rework this file after reading the XaQti data sheet
 *	"Differences between Rev. B2 & Rev. C XMAC II".
 *	This file is now 100% XMAC II Rev. C complained.
 *
 *	Revision 1.3  1998/06/29 12:18:23  malthoff
 *	Correct XMR_FS_ANY_ERR definition.
 *
 *	Revision 1.2  1998/06/29 12:10:56  malthoff
 *	Add define XMR_FS_ANY_ERR.
 *
 *	Revision 1.1  1998/06/19 13:37:17  malthoff
 *	created.
 *
 *
 ******************************************************************************/

#ifndef __INC_XMAC_H
#define __INC_XMAC_H

#ifdef __cplusplus
extern "C" {
#endif	/* __cplusplus */

/* defines ********************************************************************/

/*
 * XMAC II registers
 *
 * The XMAC registers are 16 or 32 bits wide.
 * The XMACs host processor interface is set to 16 bit mode,
 * therefore ALL registers will be addressed with 16 bit accesses.
 *
 * The following macros are provided to access the XMAC registers
 * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
 * XM_INHASH(), and XM_OUTHASH().
 * The macros are defined in SkGeHw.h.
 *
 * Note:	NA reg	= Network Address e.g DA, SA etc.
 *
 */
#define XM_MMU_CMD		0x0000	/* 16 bit r/w	MMU Command Register */
	/* 0x0004:		reserved */
#define XM_POFF			0x0008	/* 32 bit r/w	Packet Offset Register */
#define XM_BURST		0x000c	/* 32 bit r/w	Burst Register for half duplex*/
#define XM_1L_VLAN_TAG	0x0010	/* 16 bit r/w	One Level VLAN Tag ID */
#define XM_2L_VLAN_TAG	0x0014	/* 16 bit r/w	Two Level VLAN Tag ID */
	/* 0x0018 - 0x001e:	reserved */
#define XM_TX_CMD		0x0020	/* 16 bit r/w	Transmit Command Register */
#define XM_TX_RT_LIM	0x0024	/* 16 bit r/w	Transmit Retry Limit Register */
#define XM_TX_STIME		0x0028	/* 16 bit r/w	Transmit Slottime Register */
#define XM_TX_IPG		0x002c	/* 16 bit r/w	Transmit Inter Packet Gap */
#define XM_RX_CMD		0x0030	/* 16 bit r/w	Receive Command Register */
#define XM_PHY_ADDR		0x0034	/* 16 bit r/w	PHY Address Register */
#define XM_PHY_DATA		0x0038	/* 16 bit r/w	PHY Data Register */
	/* 0x003c:		reserved */
#define XM_GP_PORT		0x0040	/* 32 bit r/w	General Purpose Port Register */
#define XM_IMSK			0x0044	/* 16 bit r/w	Interrupt Mask Register */
#define XM_ISRC			0x0048	/* 16 bit r/o	Interrupt Status Register */
#define XM_HW_CFG		0x004c	/* 16 bit r/w	Hardware Config Register */
	/* 0x0050 - 0x005e:	reserved */
#define XM_TX_LO_WM		0x0060	/* 16 bit r/w	Tx FIFO Low Water Mark */
#define XM_TX_HI_WM		0x0062	/* 16 bit r/w	Tx FIFO High Water Mark */
#define XM_TX_THR		0x0064	/* 16 bit r/w	Tx Request Threshold */
#define XM_HT_THR		0x0066	/* 16 bit r/w	Host Request Threshold */
#define XM_PAUSE_DA		0x0068	/* NA reg r/w	Pause Destination Address */
	/* 0x006e:		reserved */
#define XM_CTL_PARA		0x0070	/* 32 bit r/w	Control Parameter Register */
#define XM_MAC_OPCODE	0x0074	/* 16 bit r/w	Opcode for MAC control frames */
#define XM_MAC_PTIME	0x0076	/* 16 bit r/w	Pause time for MAC ctrl frames*/
#define XM_TX_STAT		0x0078	/* 32 bit r/o	Tx Status LIFO Register */

	/* 0x0080 - 0x00fc:	16 NA reg r/w	Exact Match Address Registers */
	/*				use the XM_EXM() macro to address */
#define XM_EXM_START	0x0080	/* r/w	Start Address of the EXM Regs */

	/*
	 * XM_EXM(Reg)
	 *
	 * returns the XMAC address offset of specified Exact Match Addr Reg
	 *
	 * para:	Reg	EXM register to addr	(0 .. 15)
	 *
	 * usage:	XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
	 */
#define XM_EXM(Reg)	(XM_EXM_START + ((Reg) << 3))

#define XM_SRC_CHK		0x0100	/* NA reg r/w	Source Check Address Register */
#define XM_SA			0x0108	/* NA reg r/w	Station Address Register */
#define XM_HSM			0x0110	/* 64 bit r/w	Hash Match Address Registers */
#define XM_RX_LO_WM		0x0118	/* 16 bit r/w	Receive Low Water Mark */
#define XM_RX_HI_WM		0x011a	/* 16 bit r/w	Receive High Water Mark */
#define XM_RX_THR		0x011c	/* 32 bit r/w	Receive Request Threshold */
#define XM_DEV_ID		0x0120	/* 32 bit r/o	Device ID Register */
#define XM_MODE			0x0124	/* 32 bit r/w	Mode Register */
#define XM_LSA			0x0128	/* NA reg r/o	Last Source Register */
	/* 0x012e:		reserved */
#define XM_TS_READ		0x0130	/* 32 bit r/o	Time Stamp Read Register */
#define XM_TS_LOAD		0x0134	/* 32 bit r/o	Time Stamp Load Value */
	/* 0x0138 - 0x01fe:	reserved */
#define XM_STAT_CMD	0x0200	/* 16 bit r/w	Statistics Command Register */
#define XM_RX_CNT_EV	0x0204	/* 32 bit r/o	Rx Counter Event Register */
#define XM_TX_CNT_EV	0x0208	/* 32 bit r/o	Tx Counter Event Register */
#define XM_RX_EV_MSK	0x020c	/* 32 bit r/w	Rx Counter Event Mask */
#define XM_TX_EV_MSK	0x0210	/* 32 bit r/w	Tx Counter Event Mask */
	/* 0x0204 - 0x027e:	reserved */
#define XM_TXF_OK		0x0280	/* 32 bit r/o	Frames Transmitted OK Conuter */
#define XM_TXO_OK_HI	0x0284	/* 32 bit r/o	Octets Transmitted OK High Cnt*/
#define XM_TXO_OK_LO	0x0288	/* 32 bit r/o	Octets Transmitted OK Low Cnt */
#define XM_TXF_BC_OK	0x028c	/* 32 bit r/o	Broadcast Frames Xmitted OK */
#define XM_TXF_MC_OK	0x0290	/* 32 bit r/o	Multicast Frames Xmitted OK */
#define XM_TXF_UC_OK	0x0294	/* 32 bit r/o	Unicast Frames Xmitted OK */
#define XM_TXF_LONG		0x0298	/* 32 bit r/o	Tx Long Frame Counter */
#define XM_TXE_BURST	0x029c	/* 32 bit r/o	Tx Burst Event Counter */
#define XM_TXF_MPAUSE	0x02a0	/* 32 bit r/o	Tx Pause MAC Ctrl Frame Cnt */
#define XM_TXF_MCTRL	0x02a4	/* 32 bit r/o	Tx MAC Ctrl Frame Counter */
#define XM_TXF_SNG_COL	0x02a8	/* 32 bit r/o	Tx Single Collision Counter */
#define XM_TXF_MUL_COL	0x02ac	/* 32 bit r/o	Tx Multiple Collision Counter */
#define XM_TXF_ABO_COL	0x02b0	/* 32 bit r/o	Tx aborted due to Exces. Col. */
#define XM_TXF_LAT_COL	0x02b4	/* 32 bit r/o	Tx Late Collision Counter */
#define XM_TXF_DEF		0x02b8	/* 32 bit r/o	Tx Deferred Frame Counter */
#define XM_TXF_EX_DEF	0x02bc	/* 32 bit r/o	Tx Excessive Deferall Counter */
#define XM_TXE_FIFO_UR	0x02c0	/* 32 bit r/o	Tx FIFO Underrun Event Cnt */
#define XM_TXE_CS_ERR	0x02c4	/* 32 bit r/o	Tx Carrier Sense Error Cnt */
#define XM_TXP_UTIL		0x02c8	/* 32 bit r/o	Tx Utilization in % */
	/* 0x02cc - 0x02ce:	reserved */
#define XM_TXF_64B		0x02d0	/* 32 bit r/o	64 Byte Tx Frame Counter */
#define XM_TXF_127B		0x02d4	/* 32 bit r/o	65-127 Byte Tx Frame Counter */
#define XM_TXF_255B		0x02d8	/* 32 bit r/o	128-255 Byte Tx Frame Counter */
#define XM_TXF_511B		0x02dc	/* 32 bit r/o	256-511 Byte Tx Frame Counter */
#define XM_TXF_1023B	0x02e0	/* 32 bit r/o	512-1023 Byte Tx Frame Counter*/
#define XM_TXF_MAX_SZ	0x02e4	/* 32 bit r/o	1024-MaxSize Byte Tx Frame Cnt*/
	/* 0x02e8 - 0x02fe:	reserved */
#define XM_RXF_OK		0x0300	/* 32 bit r/o	Frames Received OK */
#define XM_RXO_OK_HI	0x0304	/* 32 bit r/o	Octets Received OK High Cnt */
#define XM_RXO_OK_LO	0x0308	/* 32 bit r/o	Octets Received OK Low Counter*/
#define XM_RXF_BC_OK	0x030c	/* 32 bit r/o	Broadcast Frames Received OK */
#define XM_RXF_MC_OK	0x0310	/* 32 bit r/o	Multicast Frames Received OK */
#define XM_RXF_UC_OK	0x0314	/* 32 bit r/o	Unicast Frames Received OK */
#define XM_RXF_MPAUSE	0x0318	/* 32 bit r/o	Rx Pause MAC Ctrl Frame Cnt */
#define XM_RXF_MCTRL	0x031c	/* 32 bit r/o	Rx MAC Ctrl Frame Counter */
#define XM_RXF_INV_MP	0x0320	/* 32 bit r/o	Rx invalid Pause Frame Cnt */
#define XM_RXF_INV_MOC	0x0324	/* 32 bit r/o	Rx Frames with inv. MAC Opcode*/
#define XM_RXE_BURST	0x0328	/* 32 bit r/o	Rx Burst Event Counter */
#define XM_RXE_FMISS	0x032c	/* 32 bit r/o	Rx Missed Frames Event Cnt */
#define XM_RXF_FRA_ERR	0x0330	/* 32 bit r/o	Rx Framing Error Counter */
#define XM_RXE_FIFO_OV	0x0334	/* 32 bit r/o	Rx FIFO overflow Event Cnt */
#define XM_RXF_JAB_PKT	0x0338	/* 32 bit r/o	Rx Jabber Packet Frame Cnt */
#define XM_RXE_CAR_ERR	0x033c	/* 32 bit r/o	Rx Carrier Event Error Cnt */
#define XM_RXF_LEN_ERR	0x0340	/* 32 bit r/o	Rx in Range Length Error */
#define XM_RXE_SYM_ERR	0x0344	/* 32 bit r/o	Rx Symbol Error Counter */
#define XM_RXE_SHT_ERR	0x0348	/* 32 bit r/o	Rx Short Event Error Cnt */
#define XM_RXE_RUNT		0x034c	/* 32 bit r/o	Rx Runt Event Counter */
#define XM_RXF_LNG_ERR	0x0350	/* 32 bit r/o	Rx Frame too Long Error Cnt */
#define XM_RXF_FCS_ERR	0x0354	/* 32 bit r/o	Rx Frame Check Seq. Error Cnt */
	/* 0x0358 - 0x035a:	reserved */
#define XM_RXF_CEX_ERR	0x035c	/* 32 bit r/o	Rx Carrier Ext Error Frame Cnt*/
#define XM_RXP_UTIL		0x0360	/* 32 bit r/o	Rx Utilization in % */
	/* 0x0364 - 0x0366:	reserved */
#define XM_RXF_64B		0x0368	/* 32 bit r/o	64 Byte Rx Frame Counter */
#define XM_RXF_127B		0x036c	/* 32 bit r/o	65-127 Byte Rx Frame Counter */
#define XM_RXF_255B		0x0370	/* 32 bit r/o	128-255 Byte Rx Frame Counter */
#define XM_RXF_511B		0x0374	/* 32 bit r/o	256-511 Byte Rx Frame Counter */
#define XM_RXF_1023B	0x0378	/* 32 bit r/o	512-1023 Byte Rx Frame Counter*/
#define XM_RXF_MAX_SZ	0x037c	/* 32 bit r/o	1024-MaxSize Byte Rx Frame Cnt*/
	/* 0x02e8 - 0x02fe:	reserved */


/*----------------------------------------------------------------------------*/
/*
 * XMAC Bit Definitions
 *
 * If the bit access behaviour differs from the register access behaviour
 * (r/w, r/o) this is documented after the bit number.
 * The following bit access behaviours are used:
 *	(sc)	self clearing
 *	(ro)	read only
 */

/*	XM_MMU_CMD	16 bit r/w	MMU Command Register */
								/* Bit 15..13:	reserved */
#define XM_MMU_PHY_RDY	(1<<12)	/* Bit 12:	PHY Read Ready */
#define XM_MMU_PHY_BUSY	(1<<11)	/* Bit 11:	PHY Busy */
#define XM_MMU_IGN_PF	(1<<10)	/* Bit 10:	Ignore Pause Frame */
#define XM_MMU_MAC_LB	(1<<9)	/* Bit  9:	Enable MAC Loopback */
								/* Bit  8:	reserved */
#define XM_MMU_FRC_COL	(1<<7)	/* Bit  7:	Force Collision */
#define XM_MMU_SIM_COL	(1<<6)	/* Bit  6:	Simulate Collision */
#define XM_MMU_NO_PRE	(1<<5)	/* Bit  5:	No MDIO Preamble */
#define XM_MMU_GMII_FD	(1<<4)	/* Bit  4:	GMII uses Full Duplex */
#define XM_MMU_RAT_CTRL	(1<<3)	/* Bit  3:	Enable Rate Control */
#define XM_MMU_GMII_LOOP (1<<2)	/* Bit  2:	PHY is in Loopback Mode */
#define XM_MMU_ENA_RX	(1<<1)	/* Bit  1:	Enable Receiver */
#define XM_MMU_ENA_TX	(1<<0)	/* Bit  0:	Enable Transmitter */


/*	XM_TX_CMD	16 bit r/w	Transmit Command Register */
								/* Bit 15..7:	reserved */
#define XM_TX_BK2BK		(1<<6)	/* Bit  6:	Ignor Carrier Sense (Tx Bk2Bk)*/
#define XM_TX_ENC_BYP	(1<<5)	/* Bit  5:	Set Encoder in Bypass Mode */
#define XM_TX_SAM_LINE	(1<<4)	/* Bit  4: (sc)	Start utilization calculation */
#define XM_TX_NO_GIG_MD	(1<<3)	/* Bit  3:	Disable Carrier Extension */
#define XM_TX_NO_PRE	(1<<2)	/* Bit  2:	Disable Preamble Generation */
#define XM_TX_NO_CRC	(1<<1)	/* Bit  1:	Disable CRC Generation */
#define XM_TX_AUTO_PAD	(1<<0)	/* Bit  0:	Enable Automatic Padding */


/*	XM_TX_RT_LIM	16 bit r/w	Transmit Retry Limit Register */
								/* Bit 15..5:	reserved */
#define XM_RT_LIM_MSK	0x1f	/* Bit  4..0:	Tx Retry Limit */


/*	XM_TX_STIME	16 bit r/w	Transmit Slottime Register */
								/* Bit 15..7:	reserved */
#define XM_STIME_MSK	0x7f	/* Bit  6..0:	Tx Slottime bits */


/*	XM_TX_IPG	16 bit r/w	Transmit Inter Packet Gap */
								/* Bit 15..8:	reserved */
#define XM_IPG_MSK		0xff	/* Bit  7..0:	IPG value bits */


/*	XM_RX_CMD	16 bit r/w	Receive Command Register */
								/* Bit 15..9:	reserved */
#define XM_RX_LENERR_OK (1<<8)	/* Bit  8	don't set Rx Err bit for */
								/*		inrange error packets */
#define XM_RX_BIG_PK_OK	(1<<7)	/* Bit  7	don't set Rx Err bit for */
								/*		jumbo packets */
#define XM_RX_IPG_CAP	(1<<6)	/* Bit  6	repl. type field with IPG */
#define XM_RX_TP_MD		(1<<5)	/* Bit  5:	Enable transparent Mode */
#define XM_RX_STRIP_FCS	(1<<4)	/* Bit  4:	Enable FCS Stripping */
#define XM_RX_SELF_RX	(1<<3)	/* Bit  3:	Enable Rx of own packets */
#define XM_RX_SAM_LINE	(1<<2)	/* Bit  2: (sc)	Start utilization calculation */
#define XM_RX_STRIP_PAD	(1<<1)	/* Bit  1:	Strip pad bytes of Rx frames */
#define XM_RX_DIS_CEXT	(1<<0)	/* Bit  0:	Disable carrier ext. check */


/*	XM_PHY_ADDR	16 bit r/w	PHY Address Register */
								/* Bit 15..5:	reserved */
#define XM_PHY_ADDR_SZ	0x1f	/* Bit  4..0:	PHY Address bits */


/*	XM_GP_PORT	32 bit r/w	General Purpose Port Register */
								/* Bit 31..7:	reserved */
#define XM_GP_ANIP		(1L<<6)	/* Bit  6: (ro)	Auto-Neg. in progress */
#define XM_GP_FRC_INT	(1L<<5)	/* Bit  5: (sc)	Force Interrupt */
								/* Bit  4:	reserved */
#define XM_GP_RES_MAC	(1L<<3)	/* Bit  3: (sc)	Reset MAC and FIFOs */
#define XM_GP_RES_STAT	(1L<<2)	/* Bit  2: (sc)	Reset the statistics module */
								/* Bit  1:	reserved */
#define XM_GP_INP_ASS	(1L<<0)	/* Bit  0: (ro) GP Input Pin asserted */


/*	XM_IMSK		16 bit r/w	Interrupt Mask Register */
/*	XM_ISRC		16 bit r/o	Interrupt Status Register */
								/* Bit 15:	reserved */
#define XM_IS_LNK_AE	(1<<14) /* Bit 14:	Link Asynchronous Event */
#define XM_IS_TX_ABORT	(1<<13) /* Bit 13:	Transmit Abort, late Col. etc */
#define XM_IS_FRC_INT	(1<<12) /* Bit 12:	Force INT bit set in GP */
#define XM_IS_INP_ASS	(1<<11)	/* Bit 11:	Input Asserted, GP bit 0 set */
#define XM_IS_LIPA_RC	(1<<10)	/* Bit 10:	Link Partner requests config */
#define XM_IS_RX_PAGE	(1<<9)	/* Bit  9:	Page Received */
#define XM_IS_TX_PAGE	(1<<8)	/* Bit  8:	Next Page Loaded for Transmit */
#define XM_IS_AND		(1<<7)	/* Bit  7:	Auto-Negotiation Done */
#define XM_IS_TSC_OV	(1<<6)	/* Bit  6:	Time Stamp Counter Overflow */
#define XM_IS_RXC_OV	(1<<5)	/* Bit  5:	Rx Counter Event Overflow */
#define XM_IS_TXC_OV	(1<<4)	/* Bit  4:	Tx Counter Event Overflow */
#define XM_IS_RXF_OV	(1<<3)	/* Bit  3:	Receive FIFO Overflow */
#define XM_IS_TXF_UR	(1<<2)	/* Bit  2:	Transmit FIFO Underrun */
#define XM_IS_TX_COMP	(1<<1)	/* Bit  1:	Frame Tx Complete */
#define XM_IS_RX_COMP	(1<<0)	/* Bit  0:	Frame Rx Complete */

#define XM_DEF_MSK	(~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
			XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))


/*	XM_HW_CFG	16 bit r/w	Hardware Config Register */
								/* Bit 15.. 4:	reserved */
#define XM_HW_GEN_EOP	(1<<3)	/* Bit  3:	generate End of Packet pulse */
#define XM_HW_COM4SIG	(1<<2)	/* Bit  2:	use Comma Detect for Sig. Det.*/
								/* Bit  1:	reserved */
#define XM_HW_GMII_MD	(1<<0)	/* Bit  0:	GMII Interface selected */


/*	XM_TX_LO_WM	16 bit r/w	Tx FIFO Low Water Mark */
/*	XM_TX_HI_WM	16 bit r/w	Tx FIFO High Water Mark */
								/* Bit 15..10	reserved */
#define XM_TX_WM_MSK	0x01ff	/* Bit  9.. 0	Tx FIFO Watermark bits */

/*	XM_TX_THR	16 bit r/w	Tx Request Threshold */
/*	XM_HT_THR	16 bit r/w	Host Request Threshold */
/*	XM_RX_THR	16 bit r/w	Rx Request Threshold */
								/* Bit 15..11	reserved */
#define XM_THR_MSK		0x03ff	/* Bit 10.. 0	Rx/Tx Request Threshold bits */


/*	XM_TX_STAT	32 bit r/o	Tx Status LIFO Register */
#define XM_ST_VALID		(1UL<<31)	/* Bit 31:	Status Valid */
#define XM_ST_BYTE_CNT	(0x3fffL<<17)	/* Bit 30..17:	Tx frame Length */
#define XM_ST_RETRY_CNT	(0x1fL<<12)	/* Bit 16..12:	Retry Count */
#define XM_ST_EX_COL	(1L<<11)	/* Bit 11:	Excessive Collisions */
#define XM_ST_EX_DEF	(1L<<10)	/* Bit 10:	Excessive Deferral */
#define XM_ST_BURST		(1L<<9)		/* Bit  9:	p. xmitted in burst md*/
#define XM_ST_DEFER		(1L<<8)		/* Bit  8:	packet was defered */
#define XM_ST_BC		(1L<<7)		/* Bit  7:	Broadcast packet */
#define XM_ST_MC		(1L<<6)		/* Bit  6:	Multicast packet */
#define XM_ST_UC		(1L<<5)		/* Bit  5:	Unicast packet */
#define XM_ST_TX_UR		(1L<<4)		/* Bit  4:	FIFO Underrun occured */
#define XM_ST_CS_ERR	(1L<<3)		/* Bit  3:	Carrier Sense Error */
#define XM_ST_LAT_COL	(1L<<2)		/* Bit  2:	Late Collision Error */
#define XM_ST_MUL_COL	(1L<<1)		/* Bit  1:	Multiple Collisions */
#define XM_ST_SGN_COL	(1L<<0)		/* Bit  0:	Single Collision */

/*	XM_RX_LO_WM	16 bit r/w	Receive Low Water Mark */
/*	XM_RX_HI_WM	16 bit r/w	Receive High Water Mark */
									/* Bit 15..11:	reserved */
#define XM_RX_WM_MSK	0x03ff		/* Bit 11.. 0:	Rx FIFO Watermark bits */


/*	XM_DEV_ID	32 bit r/o	Device ID Register */
#define XM_DEV_OUI	(0x00ffffffUL<<8)	/* Bit 31..8:	Device OUI */
#define XM_DEV_REV	(0x07L << 5)		/* Bit  7..5:	Chip Rev Num */


/*	XM_MODE		32 bit r/w	Mode Register */
									/* Bit 31..27:	reserved */
#define XM_MD_ENA_REJ	(1L<<26)	/* Bit 26:	Enable Frame Reject */
#define XM_MD_SPOE_E	(1L<<25)	/* Bit 25:	Send Pause on Edge */
									/*		extern generated */
#define XM_MD_TX_REP	(1L<<24)	/* Bit 24:	Transmit Repeater Mode */
#define XM_MD_SPOFF_I	(1L<<23)	/* Bit 23:	Send Pause on FIFO full */
									/*		intern generated */
#define XM_MD_LE_STW	(1L<<22)	/* Bit 22:	Rx Stat Word in Little Endian */
#define XM_MD_TX_CONT	(1L<<21)	/* Bit 21:	Send Continuous */
#define XM_MD_TX_PAUSE	(1L<<20)	/* Bit 20: (sc)	Send Pause Frame */
#define XM_MD_ATS		(1L<<19)	/* Bit 19:	Append Time Stamp */
#define XM_MD_SPOL_I	(1L<<18)	/* Bit 18:	Send Pause on Low */
									/*		intern generated */
#define XM_MD_SPOH_I	(1L<<17)	/* Bit 17:	Send Pause on High */
									/*		intern generated */
#define XM_MD_CAP		(1L<<16)	/* Bit 16:	Check Address Pair */
#define XM_MD_ENA_HASH	(1L<<15)	/* Bit 15:	Enable Hashing */
#define XM_MD_CSA		(1L<<14)	/* Bit 14:	Check Station Address */
#define XM_MD_CAA		(1L<<13)	/* Bit 13:	Check Address Array */
#define XM_MD_RX_MCTRL	(1L<<12)	/* Bit 12:	Rx MAC Control Frame */
#define XM_MD_RX_RUNT	(1L<<11)	/* Bit 11:	Rx Runt Frames */
#define XM_MD_RX_IRLE	(1L<<10)	/* Bit 10:	Rx in Range Len Err Frame */
#define XM_MD_RX_LONG	(1L<<9)		/* Bit  9:	Rx Long Frame */
#define XM_MD_RX_CRCE	(1L<<8)		/* Bit  8:	Rx CRC Error Frame */
#define XM_MD_RX_ERR	(1L<<7)		/* Bit  7:	Rx Error Frame */
#define XM_MD_DIS_UC	(1L<<6)		/* Bit  6:	Disable Rx Unicast */
#define XM_MD_DIS_MC	(1L<<5)		/* Bit  5:	Disable Rx Multicast */
#define XM_MD_DIS_BC	(1L<<4)		/* Bit  4:	Disable Rx Broadcast */
#define XM_MD_ENA_PROM	(1L<<3)		/* Bit  3:	Enable Promiscuous */
#define XM_MD_ENA_BE	(1L<<2)		/* Bit  2:	Enable Big Endian */
#define XM_MD_FTF		(1L<<1)		/* Bit  1: (sc)	Flush Tx FIFO */
#define XM_MD_FRF		(1L<<0)		/* Bit  0: (sc)	Flush Rx FIFO */

#define XM_PAUSE_MODE	(XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
#define XM_DEF_MODE		(XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
				XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)

/*	XM_STAT_CMD	16 bit r/w	Statistics Command Register */
								/* Bit 16..6:	reserved */
#define XM_SC_SNP_RXC	(1<<5)	/* Bit  5: (sc)	Snap Rx Counters */
#define XM_SC_SNP_TXC	(1<<4)	/* Bit  4: (sc)	Snap Tx Counters */
#define XM_SC_CP_RXC	(1<<3)	/* Bit  3:	Copy Rx Counters Continuously */
#define XM_SC_CP_TXC	(1<<2)	/* Bit  2:	Copy Tx Counters Continuously */
#define XM_SC_CLR_RXC	(1<<1)	/* Bit  1: (sc)	Clear Rx Counters */
#define XM_SC_CLR_TXC	(1<<0)	/* Bit  0: (sc) Clear Tx Counters */


/*	XM_RX_CNT_EV	32 bit r/o	Rx Counter Event Register */
/*	XM_RX_EV_MSK	32 bit r/w	Rx Counter Event Mask */
#define XMR_MAX_SZ_OV	(1UL<<31)	/* Bit 31:	1024-MaxSize Rx Cnt Ov*/
#define XMR_1023B_OV	(1L<<30)	/* Bit 30:	512-1023Byte Rx Cnt Ov*/
#define XMR_511B_OV		(1L<<29)	/* Bit 29:	256-511 Byte Rx Cnt Ov*/
#define XMR_255B_OV		(1L<<28)	/* Bit 28:	128-255 Byte Rx Cnt Ov*/
#define XMR_127B_OV		(1L<<27)	/* Bit 27:	65-127 Byte Rx Cnt Ov */
#define XMR_64B_OV		(1L<<26)	/* Bit 26:	64 Byte Rx Cnt Ov */
#define XMR_UTIL_OV		(1L<<25)	/* Bit 25:	Rx Util Cnt Overflow */
#define XMR_UTIL_UR		(1L<<24)	/* Bit 24:	Rx Util Cnt Underrun */
#define XMR_CEX_ERR_OV	(1L<<23)	/* Bit 23:	CEXT Err Cnt Ov */
									/* Bit 22:	reserved */
#define XMR_FCS_ERR_OV	(1L<<21)	/* Bit 21:	Rx FCS Error Cnt Ov */
#define XMR_LNG_ERR_OV	(1L<<20)	/* Bit 20:	Rx too Long Err Cnt Ov*/
#define XMR_RUNT_OV		(1L<<19)	/* Bit 19:	Runt Event Cnt Ov */
#define XMR_SHT_ERR_OV	(1L<<18)	/* Bit 18:	Rx Short Ev Err Cnt Ov*/
#define XMR_SYM_ERR_OV	(1L<<17)	/* Bit 17:	Rx Sym Err Cnt Ov */
									/* Bit 16:	reserved */
#define XMR_CAR_ERR_OV	(1L<<15)	/* Bit 15:	Rx Carr Ev Err Cnt Ov */
#define XMR_JAB_PKT_OV	(1L<<14)	/* Bit 14:	Rx Jabb Packet Cnt Ov */
#define XMR_FIFO_OV		(1L<<13)	/* Bit 13:	Rx FIFO Ov Ev Cnt Ov */
#define XMR_FRA_ERR_OV	(1L<<12)	/* Bit 12:	Rx Framing Err Cnt Ov */
#define XMR_FMISS_OV	(1L<<11)	/* Bit 11:	Rx Missed Ev Cnt Ov */
#define XMR_BURST		(1L<<10)	/* Bit 10:	Rx Burst Event Cnt Ov */
#define XMR_INV_MOC		(1L<<9)		/* Bit  9:	Rx with inv. MAC OC Ov*/
#define XMR_INV_MP		(1L<<8)		/* Bit  8:	Rx inv Pause Frame Ov */
#define XMR_MCTRL_OV	(1L<<7)		/* Bit  7:	Rx MAC Ctrl-F Cnt Ov */
#define XMR_MPAUSE_OV	(1L<<6)		/* Bit  6:	Rx Pause MAC Ctrl-F Ov*/
#define XMR_UC_OK_OV	(1L<<5)		/* Bit  5:	Rx Unicast Frame CntOv*/
#define XMR_MC_OK_OV	(1L<<4)		/* Bit  4:	Rx Multicast Cnt Ov */
#define XMR_BC_OK_OV	(1L<<3)		/* Bit  3:	Rx Broadcast Cnt Ov */
#define XMR_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Rx OK Low CntOv*/
#define XMR_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Rx OK Hi Cnt Ov*/
#define XMR_OK_OV		(1L<<0)		/* Bit  0:	Frames Received Ok Ov */

#define XMR_DEF_MSK		(XMR_OK_LO_OV | XMR_OK_HI_OV)

/*	XM_TX_CNT_EV	32 bit r/o	Tx Counter Event Register */
/*	XM_TX_EV_MSK	32 bit r/w	Tx Counter Event Mask */
									/* Bit 31..26:	reserved */
#define XMT_MAX_SZ_OV	(1L<<25)	/* Bit 25:	1024-MaxSize Tx Cnt Ov*/
#define XMT_1023B_OV	(1L<<24)	/* Bit 24:	512-1023Byte Tx Cnt Ov*/
#define XMT_511B_OV		(1L<<23)	/* Bit 23:	256-511 Byte Tx Cnt Ov*/
#define XMT_255B_OV		(1L<<22)	/* Bit 22:	128-255 Byte Tx Cnt Ov*/
#define XMT_127B_OV		(1L<<21)	/* Bit 21:	65-127 Byte Tx Cnt Ov */
#define XMT_64B_OV		(1L<<20)	/* Bit 20:	64 Byte Tx Cnt Ov */
#define XMT_UTIL_OV		(1L<<19)	/* Bit 19:	Tx Util Cnt Overflow */
#define XMT_UTIL_UR		(1L<<18)	/* Bit 18:	Tx Util Cnt Underrun */
#define XMT_CS_ERR_OV	(1L<<17)	/* Bit 17:	Tx Carr Sen Err Cnt Ov*/
#define XMT_FIFO_UR_OV	(1L<<16)	/* Bit 16:	Tx FIFO Ur Ev Cnt Ov */
#define XMT_EX_DEF_OV	(1L<<15)	/* Bit 15:	Tx Ex Deferall Cnt Ov */
#define XMT_DEF			(1L<<14)	/* Bit 14:	Tx Deferred Cnt Ov */
#define XMT_LAT_COL_OV	(1L<<13)	/* Bit 13:	Tx Late Col Cnt Ov */
#define XMT_ABO_COL_OV	(1L<<12)	/* Bit 12:	Tx abo dueto Ex Col Ov*/
#define XMT_MUL_COL_OV	(1L<<11)	/* Bit 11:	Tx Mult Col Cnt Ov */
#define XMT_SNG_COL		(1L<<10)	/* Bit 10:	Tx Single Col Cnt Ov */
#define XMT_MCTRL_OV	(1L<<9)		/* Bit  9:	Tx MAC Ctrl Counter Ov*/
#define XMT_MPAUSE		(1L<<8)		/* Bit  8:	Tx Pause MAC Ctrl-F Ov*/
#define XMT_BURST		(1L<<7)		/* Bit  7:	Tx Burst Event Cnt Ov */
#define XMT_LONG		(1L<<6)		/* Bit  6:	Tx Long Frame Cnt Ov */
#define XMT_UC_OK_OV	(1L<<5)		/* Bit  5:	Tx Unicast Cnt Ov */
#define XMT_MC_OK_OV	(1L<<4)		/* Bit  4:	Tx Multicast Cnt Ov */
#define XMT_BC_OK_OV	(1L<<3)		/* Bit  3:	Tx Broadcast Cnt Ov */
#define XMT_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Tx OK Low CntOv*/
#define XMT_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Tx OK Hi Cnt Ov*/
#define XMT_OK_OV		(1L<<0)		/* Bit  0:	Frames Tx Ok Ov */

#define XMT_DEF_MSK		(XMT_OK_LO_OV | XMT_OK_HI_OV)

/*
 * Receive Frame Status Encoding
 */
#define XMR_FS_LEN	(0x3fffUL<<18)	/* Bit 31..18:	Rx Frame Length */
#define XMR_FS_2L_VLAN	(1L<<17)	/* Bit 17:	tagged wh 2Lev VLAN ID*/
#define XMR_FS_1L_VLAN	(1L<<16)	/* Bit 16:	tagged wh 1Lev VLAN ID*/
#define XMR_FS_BC		(1L<<15)	/* Bit 15:	Broadcast Frame */
#define XMR_FS_MC		(1L<<14)	/* Bit 14:	Multicast Frame */
#define XMR_FS_UC		(1L<<13)	/* Bit 13:	Unicast Frame */
									/* Bit 12:	reserved */
#define XMR_FS_BURST	(1L<<11)	/* Bit 11:	Burst Mode */
#define XMR_FS_CEX_ERR	(1L<<10)	/* Bit 10:	Carrier Ext. Error */
#define XMR_FS_802_3	(1L<<9)		/* Bit  9:	802.3 Frame */
#define XMR_FS_COL_ERR	(1L<<8)		/* Bit  8:	Collision Error */
#define XMR_FS_CAR_ERR	(1L<<7)		/* Bit  7:	Carrier Event Error */
#define XMR_FS_LEN_ERR	(1L<<6)		/* Bit  6:	In-Range Length Error */
#define XMR_FS_FRA_ERR	(1L<<5)		/* Bit  5:	Framing Error */
#define XMR_FS_RUNT		(1L<<4)		/* Bit  4:	Runt Frame */
#define XMR_FS_LNG_ERR	(1L<<3)		/* Bit  3:	Giant (Jumbo) Frame */
#define XMR_FS_FCS_ERR	(1L<<2)		/* Bit  2:	Frame Check Sequ Err */
#define XMR_FS_ERR		(1L<<1)		/* Bit  1:	Frame Error */
#define XMR_FS_MCTRL	(1L<<0)		/* Bit  0:	MAC Control Packet */

/*
 * XMR_FS_ERR will be set if
 *	XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
 *	XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
 * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
 * XMR_FS_ERR unless the corresponding bit in the Receive Command
 * Register is set.
 */
#define XMR_FS_ANY_ERR	XMR_FS_ERR

/*----------------------------------------------------------------------------*/
/*
 * XMAC-PHY Registers, indirect addressed over the XMAC
 */
#define PHY_XMAC_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
#define PHY_XMAC_STAT		0x01	/* 16 bit r/w	PHY Status Register */
#define PHY_XMAC_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
#define PHY_XMAC_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
#define PHY_XMAC_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
#define PHY_XMAC_AUNE_LP	0x05	/* 16 bit r/o	Link Partner Abi Reg */
#define PHY_XMAC_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
#define PHY_XMAC_NEPG		0x07	/* 16 bit r/w	Next Page Register */
#define PHY_XMAC_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link P Reg */
	/* 0x09 - 0x0e:		reserved */
#define PHY_XMAC_EXT_STAT	0x0f	/* 16 bit r/o	Ext Status Register */
#define PHY_XMAC_RES_ABI	0x10	/* 16 bit r/o	PHY Resolved Ability */

/*----------------------------------------------------------------------------*/
/*
 * Broadcom-PHY Registers, indirect addressed over XMAC
 */
#define PHY_BCOM_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
#define PHY_BCOM_STAT		0x01	/* 16 bit r/o	PHY Status Register */
#define PHY_BCOM_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
#define PHY_BCOM_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
#define PHY_BCOM_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
#define PHY_BCOM_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
#define PHY_BCOM_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
#define PHY_BCOM_NEPG		0x07	/* 16 bit r/w	Next Page Register */
#define PHY_BCOM_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link P Reg */
	/* Broadcom-specific registers */
#define PHY_BCOM_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
#define PHY_BCOM_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
	/* 0x0b - 0x0e:		reserved */
#define PHY_BCOM_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
#define PHY_BCOM_P_EXT_CTRL	0x10	/* 16 bit r/w	PHY Extended Ctrl Reg */
#define PHY_BCOM_P_EXT_STAT	0x11	/* 16 bit r/o	PHY Extended Stat Reg */
#define PHY_BCOM_RE_CTR		0x12	/* 16 bit r/w	Receive Error Counter */
#define PHY_BCOM_FC_CTR		0x13	/* 16 bit r/w	False Carr Sense Cnt */
#define PHY_BCOM_RNO_CTR	0x14	/* 16 bit r/w	Receiver NOT_OK Cnt */
	/* 0x15 - 0x17:		reserved */
#define PHY_BCOM_AUX_CTRL	0x18	/* 16 bit r/w	Auxiliary Control Reg */
#define PHY_BCOM_AUX_STAT	0x19	/* 16 bit r/o	Auxiliary Stat Summary */
#define PHY_BCOM_INT_STAT	0x1a	/* 16 bit r/o	Interrupt Status Reg */
#define PHY_BCOM_INT_MASK	0x1b	/* 16 bit r/w	Interrupt Mask Reg */
	/* 0x1c:		reserved */
	/* 0x1d - 0x1f:		test registers */

/*----------------------------------------------------------------------------*/
/*
 * Marvel-PHY Registers, indirect addressed over GMAC
 */
#define PHY_MARV_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
#define PHY_MARV_STAT		0x01	/* 16 bit r/o	PHY Status Register */
#define PHY_MARV_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
#define PHY_MARV_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
#define PHY_MARV_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
#define PHY_MARV_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
#define PHY_MARV_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
#define PHY_MARV_NEPG		0x07	/* 16 bit r/w	Next Page Register */
#define PHY_MARV_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link P Reg */
	/* Marvel-specific registers */
#define PHY_MARV_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
#define PHY_MARV_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
	/* 0x0b - 0x0e:		reserved */
#define PHY_MARV_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
#define PHY_MARV_PHY_CTRL	0x10	/* 16 bit r/w	PHY Specific Ctrl Reg */
#define PHY_MARV_PHY_STAT	0x11	/* 16 bit r/o	PHY Specific Stat Reg */
#define PHY_MARV_INT_MASK	0x12	/* 16 bit r/w	Interrupt Mask Reg */
#define PHY_MARV_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
#define PHY_MARV_EXT_CTRL	0x14	/* 16 bit r/w	Ext. PHY Specific Ctrl */
#define PHY_MARV_RXE_CNT	0x15	/* 16 bit r/w	Receive Error Counter */
#define PHY_MARV_EXT_ADR	0x16	/* 16 bit r/w	Ext. Ad. for Cable Diag. */
	/* 0x17:		reserved */
#define PHY_MARV_LED_CTRL	0x18	/* 16 bit r/w	LED Control Reg */
#define PHY_MARV_LED_OVER	0x19	/* 16 bit r/w	Manual LED Override Reg */
#define PHY_MARV_EXT_CTRL_2	0x1a	/* 16 bit r/w	Ext. PHY Specific Ctrl 2 */
#define PHY_MARV_EXT_P_STAT	0x1b	/* 16 bit r/w	Ext. PHY Spec. Stat Reg */
#define PHY_MARV_CABLE_DIAG	0x1c	/* 16 bit r/o	Cable Diagnostic Reg */
	/* 0x1d - 0x1f:		reserved */

/*----------------------------------------------------------------------------*/
/*
 * Level One-PHY Registers, indirect addressed over XMAC
 */
#define PHY_LONE_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
#define PHY_LONE_STAT		0x01	/* 16 bit r/o	PHY Status Register */
#define PHY_LONE_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
#define PHY_LONE_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
#define PHY_LONE_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
#define PHY_LONE_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
#define PHY_LONE_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
#define PHY_LONE_NEPG		0x07	/* 16 bit r/w	Next Page Register */
#define PHY_LONE_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner*/
	/* Level One-specific registers */
#define PHY_LONE_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg*/
#define PHY_LONE_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
	/* 0x0b -0x0e:		reserved */
#define PHY_LONE_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
#define PHY_LONE_PORT_CFG	0x10	/* 16 bit r/w	Port Configuration Reg*/
#define PHY_LONE_Q_STAT		0x11	/* 16 bit r/o	Quick Status Reg */
#define PHY_LONE_INT_ENAB	0x12	/* 16 bit r/w	Interrupt Enable Reg */
#define PHY_LONE_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
#define PHY_LONE_LED_CFG	0x14	/* 16 bit r/w	LED Configuration Reg */
#define PHY_LONE_PORT_CTRL	0x15	/* 16 bit r/w	Port Control Reg */
#define PHY_LONE_CIM		0x16	/* 16 bit r/o	CIM Reg */
	/* 0x17 -0x1c:		reserved */

/*----------------------------------------------------------------------------*/
/*
 * National-PHY Registers, indirect addressed over XMAC
 */
#define PHY_NAT_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
#define PHY_NAT_STAT		0x01	/* 16 bit r/w	PHY Status Register */
#define PHY_NAT_ID0			0x02	/* 16 bit r/o	PHY ID0 Register */
#define PHY_NAT_ID1			0x03	/* 16 bit r/o	PHY ID1 Register */
#define PHY_NAT_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
#define PHY_NAT_AUNE_LP		0x05	/* 16 bit r/o	Link Partner Ability Reg */
#define PHY_NAT_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
#define PHY_NAT_NEPG		0x07	/* 16 bit r/w	Next Page Register */
#define PHY_NAT_NEPG_LP		0x08	/* 16 bit r/o	Next Page Link Partner Reg */
	/* National-specific registers */
#define PHY_NAT_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg */
#define PHY_NAT_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
	/* 0x0b -0x0e:		reserved */
#define PHY_NAT_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Register */
#define PHY_NAT_EXT_CTRL1	0x10	/* 16 bit r/o	Extended Control Reg1 */
#define PHY_NAT_Q_STAT1		0x11	/* 16 bit r/o	Quick Status Reg1 */
#define PHY_NAT_10B_OP		0x12	/* 16 bit r/o	10Base-T Operations Reg */
#define PHY_NAT_EXT_CTRL2	0x13	/* 16 bit r/o	Extended Control Reg1 */
#define PHY_NAT_Q_STAT2		0x14	/* 16 bit r/o	Quick Status Reg2 */
	/* 0x15 -0x18:		reserved */
#define PHY_NAT_PHY_ADDR	0x19	/* 16 bit r/o	PHY Address Register */


/*----------------------------------------------------------------------------*/

/*
 * PHY bit definitions
 * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
 * Xmac/Broadcom/LevelOne/National-specific.
 * All other are general.
 */

/*****  PHY_XMAC_CTRL	16 bit r/w	PHY Control Register *****/
/*****  PHY_BCOM_CTRL	16 bit r/w	PHY Control Register *****/
/*****  PHY_LONE_CTRL	16 bit r/w	PHY Control Register *****/
#define PHY_CT_RESET	(1<<15)	/* Bit 15: (sc)	clear all PHY related regs */
#define PHY_CT_LOOP		(1<<14)	/* Bit 14:	enable Loopback over PHY */
#define PHY_CT_SPS_LSB	(1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
#define PHY_CT_ANE		(1<<12)	/* Bit 12:	Auto-Negotiation Enabled */
#define PHY_CT_PDOWN	(1<<11)	/* Bit 11: (BC,L1) Power Down Mode */
#define PHY_CT_ISOL		(1<<10)	/* Bit 10: (BC,L1) Isolate Mode */
#define PHY_CT_RE_CFG	(1<<9)	/* Bit  9: (sc) Restart Auto-Negotiation */
#define PHY_CT_DUP_MD	(1<<8)	/* Bit  8:	Duplex Mode */
#define PHY_CT_COL_TST	(1<<7)	/* Bit  7: (BC,L1) Collision Test enabled */
#define PHY_CT_SPS_MSB	(1<<6)	/* Bit  6: (BC,L1) Speed select, upper bit */
								/* Bit  5..0:	reserved */

#define PHY_CT_SP1000	PHY_CT_SPS_MSB	/* enable speed of 1000 Mbps */
#define PHY_CT_SP100	PHY_CT_SPS_LSB	/* enable speed of  100 Mbps */
#define PHY_CT_SP10		(0)				/* enable speed of   10 Mbps */


/*****  PHY_XMAC_STAT	16 bit r/w	PHY Status Register *****/
/*****  PHY_BCOM_STAT	16 bit r/w	PHY Status Register *****/
/*****  PHY_MARV_STAT	16 bit r/w	PHY Status Register *****/
/*****  PHY_LONE_STAT	16 bit r/w	PHY Status Register *****/
								/* Bit 15..9:	reserved */
				/*	(BC/L1) 100/10 Mbps cap bits ignored*/
#define PHY_ST_EXT_ST	(1<<8)	/* Bit  8:	Extended Status Present */
								/* Bit  7:	reserved */
#define PHY_ST_PRE_SUP	(1<<6)	/* Bit  6: (BC/L1) preamble suppression */
#define PHY_ST_AN_OVER	(1<<5)	/* Bit  5:	Auto-Negotiation Over */
#define PHY_ST_REM_FLT	(1<<4)	/* Bit  4:	Remote Fault Condition Occured */
#define PHY_ST_AN_CAP	(1<<3)	/* Bit  3:	Auto-Negotiation Capability */
#define PHY_ST_LSYNC	(1<<2)	/* Bit  2:	Link Synchronized */
#define PHY_ST_JAB_DET	(1<<1)	/* Bit  1: (BC/L1) Jabber Detected */
#define PHY_ST_EXT_REG	(1<<0)	/* Bit  0:	Extended Register available */


/*****	PHY_XMAC_ID1		16 bit r/o	PHY ID1 Register */
/*****	PHY_BCOM_ID1		16 bit r/o	PHY ID1 Register */
/*****	PHY_MARV_ID1		16 bit r/o	PHY ID1 Register */
/*****	PHY_LONE_ID1		16 bit r/o	PHY ID1 Register */
#define PHY_I1_OUI_MSK	(0x3f<<10)	/* Bit 15..10:	Organization Unique ID */
#define PHY_I1_MOD_NUM	(0x3f<<4)	/* Bit  9.. 4:	Model Number */
#define PHY_I1_REV_MSK	0x0f		/* Bit  3.. 0:	Revision Number */

/* different Broadcom PHY Ids */
#define PHY_BCOM_ID1_A1		0x6041
#define PHY_BCOM_ID1_B2		0x6043
#define PHY_BCOM_ID1_C0		0x6044
#define PHY_BCOM_ID1_C5		0x6047


/*****  PHY_XMAC_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
/*****  PHY_XMAC_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
#define PHY_AN_NXT_PG	(1<<15)	/* Bit 15:	Request Next Page */
#define PHY_X_AN_ACK	(1<<14)	/* Bit 14: (ro)	Acknowledge Received */
#define PHY_X_AN_RFB	(3<<12)	/* Bit 13..12:	Remote Fault Bits */
								/* Bit 11.. 9:	reserved */
#define PHY_X_AN_PAUSE	(3<<7)	/* Bit  8.. 7:	Pause Bits */
#define PHY_X_AN_HD		(1<<6)	/* Bit  6:	Half Duplex */
#define PHY_X_AN_FD		(1<<5)	/* Bit  5:	Full Duplex */
								/* Bit  4.. 0:	reserved */

/*****  PHY_BCOM_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
/*****  PHY_BCOM_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
								/* Bit 14:	reserved */
#define PHY_B_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
								/* Bit 12:	reserved */
#define PHY_B_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
#define PHY_B_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
								/* Bit  9..5:	100/10 BT cap bits ingnored */
#define PHY_B_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/

/*****  PHY_LONE_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
/*****  PHY_LONE_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
								/* Bit 14:	reserved */
#define PHY_L_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
								/* Bit 12:	reserved */
#define PHY_L_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
#define PHY_L_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
								/* Bit  9..5:	100/10 BT cap bits ingnored */
#define PHY_L_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/

/*****  PHY_NAT_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
/*****  PHY_NAT_AUNE_LP		16 bit r/o	Link Partner Ability Reg *****/
/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
								/* Bit 14:	reserved */
#define PHY_N_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
								/* Bit 12:	reserved */
#define PHY_N_AN_100F	(1<<11)	/* Bit 11:	100Base-T2 FD Support */
#define PHY_N_AN_100H	(1<<10)	/* Bit 10:	100Base-T2 HD Support */
								/* Bit  9..5:	100/10 BT cap bits ingnored */
#define PHY_N_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/

/* field type definition for PHY_x_AN_SEL */
#define PHY_SEL_TYPE	0x01	/* 00001 = Ethernet */

/*****  PHY_XMAC_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
								/* Bit 15..4:	reserved */
#define PHY_AN_LP_NP	(1<<3)	/* Bit  3:	Link Partner can Next Page */
#define PHY_AN_LOC_NP	(1<<2)	/* Bit  2:	Local PHY can Next Page */
#define PHY_AN_RX_PG	(1<<1)	/* Bit  1:	Page Received */
								/* Bit  0:	reserved */

/*****  PHY_BCOM_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
								/* Bit 15..5:	reserved */
#define PHY_B_AN_PDF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
/*	PHY_AN_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
/*	PHY_AN_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
/*	PHY_AN_RX_PG		(see XMAC) Bit  1:	Page Received */
#define PHY_B_AN_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */

/*****  PHY_LONE_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
#define PHY_L_AN_BP		(1<<5)	/* Bit  5:	Base Page Indication */
#define PHY_L_AN_PDF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
/*	PHY_AN_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
/*	PHY_AN_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
/*	PHY_AN_RX_PG		(see XMAC) Bit  1:	Page Received */
#define PHY_B_AN_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */


/*****  PHY_XMAC_NEPG		16 bit r/w	Next Page Register *****/
/*****  PHY_BCOM_NEPG		16 bit r/w	Next Page Register *****/
/*****  PHY_LONE_NEPG		16 bit r/w	Next Page Register *****/
/*****  PHY_XMAC_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
/*****  PHY_BCOM_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
/*****  PHY_LONE_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
#define PHY_NP_MORE		(1<<15)	/* Bit 15:	More, Next Pages to follow */
#define PHY_NP_ACK1		(1<<14)	/* Bit 14: (ro)	Ack 1, for receiving a message*/
#define PHY_NP_MSG_VAL	(1<<13)	/* Bit 13:	Message Page valid */
#define PHY_NP_ACK2		(1<<12)	/* Bit 12:	Ack 2, comply with msg content*/
#define PHY_NP_TOG		(1<<11)	/* Bit 11:	Toggle Bit, ensure sync */
#define PHY_NP_MSG		0x07ff	/* Bit 10..0:	Message from/to Link Partner */

/*
 * XMAC-Specific
 */
/*****  PHY_XMAC_EXT_STAT	16 bit r/w	Extended Status Register *****/
#define PHY_X_EX_FD		(1<<15)	/* Bit 15:	Device Supports Full Duplex */
#define PHY_X_EX_HD		(1<<14)	/* Bit 14:	Device Supports Half Duplex */
								/* Bit 13..0:	reserved */

/*****  PHY_XMAC_RES_ABI	16 bit r/o	PHY Resolved Ability *****/
								/* Bit 15..9:	reserved */
#define PHY_X_RS_PAUSE	(3<<7)	/* Bit  8..7:	selected Pause Mode */
#define PHY_X_RS_HD		(1<<6)	/* Bit  6:	Half Duplex Mode selected */
#define PHY_X_RS_FD		(1<<5)	/* Bit  5:	Full Duplex Mode selected */
#define PHY_X_RS_ABLMIS (1<<4)	/* Bit  4:	duplex or pause cap mismatch */
#define PHY_X_RS_PAUMIS (1<<3)	/* Bit  3:	pause capability missmatch */
								/* Bit  2..0:	reserved */
/*
 * Remote Fault Bits (PHY_X_AN_RFB) encoding
 */
#define X_RFB_OK		(0<<12)	/* Bit 13..12	No errors, Link OK */
#define X_RFB_LF		(1<<12)	/* Bit 13..12	Link Failure */
#define X_RFB_OFF		(2<<12)	/* Bit 13..12	Offline */
#define X_RFB_AN_ERR	(3<<12)	/* Bit 13..12	Auto-Negotiation Error */

/*
 * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding
 */
#define PHY_X_P_NO_PAUSE	(0<<7)	/* Bit  8..7:	no Pause Mode */
#define PHY_X_P_SYM_MD		(1<<7)	/* Bit  8..7:	symmetric Pause Mode */
#define PHY_X_P_ASYM_MD		(2<<7)	/* Bit  8..7:	asymmetric Pause Mode */
#define PHY_X_P_BOTH_MD		(3<<7)	/* Bit  8..7:	both Pause Mode */


/*
 * Broadcom-Specific
 */
/*****  PHY_BCOM_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
#define PHY_B_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
#define PHY_B_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
#define PHY_B_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
#define PHY_B_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
#define PHY_B_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
#define PHY_B_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
									/* Bit  7..0:	reserved */

/*****  PHY_BCOM_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
#define PHY_B_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
#define PHY_B_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
#define PHY_B_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
#define PHY_B_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status */
#define PHY_B_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
#define PHY_B_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
									/* Bit  9..8:	reserved */
#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */

/*****  PHY_BCOM_EXT_STAT	16 bit r/o	Extended Status Register *****/
#define PHY_B_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
#define PHY_B_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
#define PHY_B_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
#define PHY_B_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
									/* Bit 11..0:	reserved */

/*****  PHY_BCOM_P_EXT_CTRL	16 bit r/w	PHY Extended Control Reg *****/
#define PHY_B_PEC_MAC_PHY	(1<<15)	/* Bit 15:	10BIT/GMI-Interface */
#define PHY_B_PEC_DIS_CROSS	(1<<14)	/* Bit 14:	Disable MDI Crossover */
#define PHY_B_PEC_TX_DIS	(1<<13)	/* Bit 13:	Tx output Disabled */
#define PHY_B_PEC_INT_DIS	(1<<12)	/* Bit 12:	Interrupts Disabled */
#define PHY_B_PEC_F_INT		(1<<11)	/* Bit 11:	Force Interrupt */
#define PHY_B_PEC_BY_45		(1<<10)	/* Bit 10:	Bypass 4B5B-Decoder */
#define PHY_B_PEC_BY_SCR	(1<<9)	/* Bit  9:	Bypass Scrambler */
#define PHY_B_PEC_BY_MLT3	(1<<8)	/* Bit  8:	Bypass MLT3 Encoder */
#define PHY_B_PEC_BY_RXA	(1<<7)	/* Bit  7:	Bypass Rx Alignm. */
#define PHY_B_PEC_RES_SCR	(1<<6)	/* Bit  6:	Reset Scrambler */
#define PHY_B_PEC_EN_LTR	(1<<5)	/* Bit  5:	Ena LED Traffic Mode */
#define PHY_B_PEC_LED_ON	(1<<4)	/* Bit  4:	Force LED's on */
#define PHY_B_PEC_LED_OFF	(1<<3)	/* Bit  3:	Force LED's off */
#define PHY_B_PEC_EX_IPG	(1<<2)	/* Bit  2:	Extend Tx IPG Mode */
#define PHY_B_PEC_3_LED		(1<<1)	/* Bit  1:	Three Link LED mode */
#define PHY_B_PEC_HIGH_LA	(1<<0)	/* Bit  0:	GMII FIFO Elasticy */

/*****  PHY_BCOM_P_EXT_STAT	16 bit r/o	PHY Extended Status Reg *****/
									/* Bit 15..14:	reserved */
#define PHY_B_PES_CROSS_STAT	(1<<13)	/* Bit 13:	MDI Crossover Status */
#define PHY_B_PES_INT_STAT	(1<<12)	/* Bit 12:	Interrupt Status */
#define PHY_B_PES_RRS		(1<<11)	/* Bit 11:	Remote Receiver Stat. */
#define PHY_B_PES_LRS		(1<<10)	/* Bit 10:	Local Receiver Stat. */
#define PHY_B_PES_LOCKED	(1<<9)	/* Bit  9:	Locked */
#define PHY_B_PES_LS		(1<<8)	/* Bit  8:	Link Status */
#define PHY_B_PES_RF		(1<<7)	/* Bit  7:	Remote Fault */
#define PHY_B_PES_CE_ER		(1<<6)	/* Bit  6:	Carrier Ext Error */
#define PHY_B_PES_BAD_SSD	(1<<5)	/* Bit  5:	Bad SSD */
#define PHY_B_PES_BAD_ESD	(1<<4)	/* Bit  4:	Bad ESD */
#define PHY_B_PES_RX_ER		(1<<3)	/* Bit  3:	Receive Error */
#define PHY_B_PES_TX_ER		(1<<2)	/* Bit  2:	Transmit Error */
#define PHY_B_PES_LOCK_ER	(1<<1)	/* Bit  1:	Lock Error */
#define PHY_B_PES_MLT3_ER	(1<<0)	/* Bit  0:	MLT3 code Error */

/*****  PHY_BCOM_FC_CTR		16 bit r/w	False Carrier Counter *****/
									/* Bit 15..8:	reserved */
#define PHY_B_FC_CTR		0xff	/* Bit  7..0:	False Carrier Counter */

/*****  PHY_BCOM_RNO_CTR	16 bit r/w	Receive NOT_OK Counter *****/
#define PHY_B_RC_LOC_MSK	0xff00	/* Bit 15..8:	Local Rx NOT_OK cnt */
#define PHY_B_RC_REM_MSK	0x00ff	/* Bit  7..0:	Remote Rx NOT_OK cnt */

/*****  PHY_BCOM_AUX_CTRL	16 bit r/w	Auxiliary Control Reg *****/
#define PHY_B_AC_L_SQE		(1<<15)	/* Bit 15:	Low Squelch */
#define PHY_B_AC_LONG_PACK	(1<<14)	/* Bit 14:	Rx Long Packets */
#define PHY_B_AC_ER_CTRL	(3<<12)	/* Bit 13..12:	Edgerate Control */
									/* Bit 11:	reserved */
#define PHY_B_AC_TX_TST		(1<<10) /* Bit 10:	Tx test bit, always 1 */
									/* Bit  9.. 8:	reserved */
#define PHY_B_AC_DIS_PRF	(1<<7)	/* Bit  7:	dis part resp filter */
									/* Bit  6:	reserved */
#define PHY_B_AC_DIS_PM		(1<<5)	/* Bit  5:	dis power management */
									/* Bit  4:	reserved */
#define PHY_B_AC_DIAG		(1<<3)	/* Bit  3:	Diagnostic Mode */
									/* Bit  2.. 0:	reserved */

/*****  PHY_BCOM_AUX_STAT	16 bit r/o	Auxiliary Status Reg *****/
#define PHY_B_AS_AN_C		(1<<15)	/* Bit 15:	AutoNeg complete */
#define PHY_B_AS_AN_CA		(1<<14)	/* Bit 14:	AN Complete Ack */
#define PHY_B_AS_ANACK_D	(1<<13)	/* Bit 13:	AN Ack Detect */
#define PHY_B_AS_ANAB_D		(1<<12)	/* Bit 12:	AN Ability Detect */
#define PHY_B_AS_NPW		(1<<11)	/* Bit 11:	AN Next Page Wait */
#define PHY_B_AS_AN_RES_MSK	(7<<8)	/* Bit 10..8:	AN HDC */
#define PHY_B_AS_PDF		(1<<7)	/* Bit  7:	Parallel Detect. Fault */
#define PHY_B_AS_RF			(1<<6)	/* Bit  6:	Remote Fault */
#define PHY_B_AS_ANP_R		(1<<5)	/* Bit  5:	AN Page Received */
#define PHY_B_AS_LP_ANAB	(1<<4)	/* Bit  4:	LP AN Ability */
#define PHY_B_AS_LP_NPAB	(1<<3)	/* Bit  3:	LP Next Page Ability */
#define PHY_B_AS_LS			(1<<2)	/* Bit  2:	Link Status */
#define PHY_B_AS_PRR		(1<<1)	/* Bit  1:	Pause Resolution-Rx */
#define PHY_B_AS_PRT		(1<<0)	/* Bit  0:	Pause Resolution-Tx */

#define PHY_B_AS_PAUSE_MSK	(PHY_B_AS_PRR | PHY_B_AS_PRT)

/*****  PHY_BCOM_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
/*****  PHY_BCOM_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
									/* Bit 15:	reserved */
#define PHY_B_IS_PSE		(1<<14)	/* Bit 14:	Pair Swap Error */
#define PHY_B_IS_MDXI_SC	(1<<13)	/* Bit 13:	MDIX Status Change */
#define PHY_B_IS_HCT		(1<<12)	/* Bit 12:	counter above 32k */
#define PHY_B_IS_LCT		(1<<11)	/* Bit 11:	counter above 128 */
#define PHY_B_IS_AN_PR		(1<<10)	/* Bit 10:	Page Received */
#define PHY_B_IS_NO_HDCL	(1<<9)	/* Bit  9:	No HCD Link */
#define PHY_B_IS_NO_HDC		(1<<8)	/* Bit  8:	No HCD */
#define PHY_B_IS_NEG_USHDC	(1<<7)	/* Bit  7:	Negotiated Unsup. HCD */
#define PHY_B_IS_SCR_S_ER	(1<<6)	/* Bit  6:	Scrambler Sync Error */
#define PHY_B_IS_RRS_CHANGE	(1<<5)	/* Bit  5:	Remote Rx Stat Change */
#define PHY_B_IS_LRS_CHANGE	(1<<4)	/* Bit  4:	Local Rx Stat Change */
#define PHY_B_IS_DUP_CHANGE	(1<<3)	/* Bit  3:	Duplex Mode Change */
#define PHY_B_IS_LSP_CHANGE	(1<<2)	/* Bit  2:	Link Speed Change */
#define PHY_B_IS_LST_CHANGE	(1<<1)	/* Bit  1:	Link Status Changed */
#define PHY_B_IS_CRC_ER		(1<<0)	/* Bit  0:	CRC Error */

#define PHY_B_DEF_MSK	(~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))

/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
#define PHY_B_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
#define PHY_B_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
#define PHY_B_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
#define PHY_B_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */

/*
 * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
 */
#define PHY_B_RES_1000FD	(7<<8)	/* Bit 10..8:	1000Base-T Full Dup. */
#define PHY_B_RES_1000HD	(6<<8)	/* Bit 10..8:	1000Base-T Half Dup. */
/* others: 100/10: invalid for us */

/*
 * Level One-Specific
 */
/*****  PHY_LONE_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
#define PHY_L_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
#define PHY_L_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
#define PHY_L_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
#define PHY_L_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
#define PHY_L_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
#define PHY_L_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
									/* Bit  7..0:	reserved */

/*****  PHY_LONE_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
#define PHY_L_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
#define PHY_L_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
#define PHY_L_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
#define PHY_L_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status*/
#define PHY_L_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
#define PHY_L_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
									/* Bit  9..8:	reserved */
#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */

/*****  PHY_LONE_EXT_STAT	16 bit r/o	Extended Status Register *****/
#define PHY_L_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
#define PHY_L_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
#define PHY_L_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
#define PHY_L_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
									/* Bit 11..0:	reserved */

/*****  PHY_LONE_PORT_CFG	16 bit r/w	Port Configuration Reg *****/
#define PHY_L_PC_REP_MODE	(1<<15)	/* Bit 15:	Repeater Mode */
									/* Bit 14:	reserved */
#define PHY_L_PC_TX_DIS		(1<<13)	/* Bit 13:	Tx output Disabled */
#define PHY_L_PC_BY_SCR		(1<<12)	/* Bit 12:	Bypass Scrambler */
#define PHY_L_PC_BY_45		(1<<11)	/* Bit 11:	Bypass 4B5B-Decoder */
#define PHY_L_PC_JAB_DIS	(1<<10)	/* Bit 10:	Jabber Disabled */
#define PHY_L_PC_SQE		(1<<9)	/* Bit  9:	Enable Heartbeat */
#define PHY_L_PC_TP_LOOP	(1<<8)	/* Bit  8:	TP Loopback */
#define PHY_L_PC_SSS		(1<<7)	/* Bit  7:	Smart Speed Selection */
#define PHY_L_PC_FIFO_SIZE	(1<<6)	/* Bit  6:	FIFO Size */
#define PHY_L_PC_PRE_EN		(1<<5)	/* Bit  5:	Preamble Enable */
#define PHY_L_PC_CIM		(1<<4)	/* Bit  4:	Carrier Integrity Mon */
#define PHY_L_PC_10_SER		(1<<3)	/* Bit  3:	Use Serial Output */
#define PHY_L_PC_ANISOL		(1<<2)	/* Bit  2:	Unisolate Port */
#define PHY_L_PC_TEN_BIT	(1<<1)	/* Bit  1:	10bit iface mode on */
#define PHY_L_PC_ALTCLOCK	(1<<0)	/* Bit  0: (ro)	ALTCLOCK Mode on */

/*****  PHY_LONE_Q_STAT		16 bit r/o	Quick Status Reg *****/
#define PHY_L_QS_D_RATE		(3<<14)	/* Bit 15..14:	Data Rate */
#define PHY_L_QS_TX_STAT	(1<<13)	/* Bit 13:	Transmitting */
#define PHY_L_QS_RX_STAT	(1<<12)	/* Bit 12:	Receiving */
#define PHY_L_QS_COL_STAT	(1<<11)	/* Bit 11:	Collision */
#define PHY_L_QS_L_STAT		(1<<10)	/* Bit 10:	Link is up */
#define PHY_L_QS_DUP_MOD	(1<<9)	/* Bit  9:	Full/Half Duplex */
#define PHY_L_QS_AN			(1<<8)	/* Bit  8:	AutoNeg is On */
#define PHY_L_QS_AN_C		(1<<7)	/* Bit  7:	AN is Complete */
#define PHY_L_QS_LLE		(7<<4)	/* Bit  6:	Line Length Estim. */
#define PHY_L_QS_PAUSE		(1<<3)	/* Bit  3:	LP advertised Pause */
#define PHY_L_QS_AS_PAUSE	(1<<2)	/* Bit  2:	LP adv. asym. Pause */
#define PHY_L_QS_ISOLATE	(1<<1)	/* Bit  1:	CIM Isolated */
#define PHY_L_QS_EVENT		(1<<0)	/* Bit  0:	Event has occurred */

/*****  PHY_LONE_INT_ENAB	16 bit r/w	Interrupt Enable Reg *****/
/*****  PHY_LONE_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
									/* Bit 15..14:	reserved */
#define PHY_L_IS_AN_F		(1<<13)	/* Bit 13:	Auto-Negotiation fault */
									/* Bit 12:	not described */
#define PHY_L_IS_CROSS		(1<<11)	/* Bit 11:	Crossover used */
#define PHY_L_IS_POL		(1<<10)	/* Bit 10:	Polarity correct. used*/
#define PHY_L_IS_SS			(1<<9)	/* Bit  9:	Smart Speed Downgrade*/
#define PHY_L_IS_CFULL		(1<<8)	/* Bit  8:	Counter Full */
#define PHY_L_IS_AN_C		(1<<7)	/* Bit  7:	AutoNeg Complete */
#define PHY_L_IS_SPEED		(1<<6)	/* Bit  6:	Speed Changed */
#define PHY_L_IS_DUP		(1<<5)	/* Bit  5:	Duplex Changed */
#define PHY_L_IS_LS			(1<<4)	/* Bit  4:	Link Status Changed */
#define PHY_L_IS_ISOL		(1<<3)	/* Bit  3:	Isolate Occured */
#define PHY_L_IS_MDINT		(1<<2)	/* Bit  2: (ro)	STAT: MII Int Pending */
#define PHY_L_IS_INTEN		(1<<1)	/* Bit  1:	ENAB: Enable IRQs */
#define PHY_L_IS_FORCE		(1<<0)	/* Bit  0:	ENAB: Force Interrupt */

/* int. mask */
#define PHY_L_DEF_MSK		(PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)

/*****  PHY_LONE_LED_CFG	16 bit r/w	LED Configuration Reg *****/
#define PHY_L_LC_LEDC		(3<<14)	/* Bit 15..14:	Col/Blink/On/Off */
#define PHY_L_LC_LEDR		(3<<12)	/* Bit 13..12:	Rx/Blink/On/Off */
#define PHY_L_LC_LEDT		(3<<10)	/* Bit 11..10:	Tx/Blink/On/Off */
#define PHY_L_LC_LEDG		(3<<8)	/* Bit  9..8:	Giga/Blink/On/Off */
#define PHY_L_LC_LEDS		(3<<6)	/* Bit  7..6:	10-100/Blink/On/Off */
#define PHY_L_LC_LEDL		(3<<4)	/* Bit  5..4:	Link/Blink/On/Off */
#define PHY_L_LC_LEDF		(3<<2)	/* Bit  3..2:	Duplex/Blink/On/Off */
#define PHY_L_LC_PSTRECH	(1<<1)	/* Bit  1:	Strech LED Pulses */
#define PHY_L_LC_FREQ		(1<<0)	/* Bit  0:	30/100 ms */

/*****  PHY_LONE_PORT_CTRL	16 bit r/w	Port Control Reg *****/
#define PHY_L_PC_TX_TCLK	(1<<15)	/* Bit 15:	Enable TX_TCLK */
									/* Bit 14:	reserved */
#define PHY_L_PC_ALT_NP		(1<<13)	/* Bit 14:	Alternate Next Page */
#define PHY_L_PC_GMII_ALT	(1<<12)	/* Bit 13:	Alternate GMII driver */
									/* Bit 11:	reserved */
#define PHY_L_PC_TEN_CRS	(1<<10)	/* Bit 10:	Extend CRS*/
									/* Bit  9..0:	not described */

/*****  PHY_LONE_CIM		16 bit r/o	CIM Reg *****/
#define PHY_L_CIM_ISOL		(255<<8)/* Bit 15..8:	Isolate Count */
#define PHY_L_CIM_FALSE_CAR	(255<<0)/* Bit  7..0:	False Carrier Count */


/*
 * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
 */
#define PHY_L_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
#define PHY_L_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
#define PHY_L_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
#define PHY_L_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */


/*
 * National-Specific
 */
/*****  PHY_NAT_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
#define PHY_N_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
#define PHY_N_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
#define PHY_N_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
#define PHY_N_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
#define PHY_N_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
#define PHY_N_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
#define PHY_N_1000C_APC		(1<<7)	/* Bit  7:	Asymmetric Pause Cap. */
									/* Bit  6..0:	reserved */

/*****  PHY_NAT_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
#define PHY_N_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
#define PHY_N_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
#define PHY_N_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
#define PHY_N_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status*/
#define PHY_N_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
#define PHY_N_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
#define PHY_N_1000C_LP_APC	(1<<9)	/* Bit  9:	LP Asym. Pause Cap. */
									/* Bit  8:	reserved */
#define PHY_N_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */

/*****  PHY_NAT_EXT_STAT	16 bit r/o	Extended Status Register *****/
#define PHY_N_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
#define PHY_N_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
#define PHY_N_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
#define PHY_N_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
									/* Bit 11..0:	reserved */

/* todo: those are still missing */
/*****  PHY_NAT_EXT_CTRL1	16 bit r/o	Extended Control Reg1 *****/
/*****  PHY_NAT_Q_STAT1		16 bit r/o	Quick Status Reg1 *****/
/*****  PHY_NAT_10B_OP		16 bit r/o	10Base-T Operations Reg *****/
/*****  PHY_NAT_EXT_CTRL2	16 bit r/o	Extended Control Reg1 *****/
/*****  PHY_NAT_Q_STAT2		16 bit r/o	Quick Status Reg2 *****/
/*****  PHY_NAT_PHY_ADDR	16 bit r/o	PHY Address Register *****/

/*
 * Marvell-Specific
 */
/*****  PHY_MARV_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
/*****  PHY_MARV_AUNE_LP	16 bit r/w	Link Part Ability Reg *****/
#define PHY_M_AN_NXT_PG		BIT_15	/* Request Next Page */
#define PHY_M_AN_ACK		BIT_14	/* (ro)	Acknowledge Received */
#define PHY_M_AN_RF			BIT_13	/* Remote Fault */
									/* Bit 12:	reserved */
#define PHY_M_AN_ASP		BIT_11	/* Asymmetric Pause */
#define PHY_M_AN_PC			BIT_10	/* MAC Pause implemented */
#define PHY_M_AN_100_FD		BIT_8	/* Advertise 100Base-TX Full Duplex */
#define PHY_M_AN_100_HD		BIT_7	/* Advertise 100Base-TX Half Duplex */
#define PHY_M_AN_10_FD		BIT_6	/* Advertise 10Base-TX Full Duplex */
#define PHY_M_AN_10_HD		BIT_5	/* Advertise 10Base-TX Half Duplex */

/* special defines for FIBER (88E1011S only) */
#define PHY_M_AN_ASP_X		BIT_8	/* Asymmetric Pause */
#define PHY_M_AN_PC_X		BIT_7	/* MAC Pause implemented */
#define PHY_M_AN_1000X_AHD	BIT_6	/* Advertise 10000Base-X Half Duplex */
#define PHY_M_AN_1000X_AFD	BIT_5	/* Advertise 10000Base-X Full Duplex */

/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
#define PHY_M_P_NO_PAUSE_X	(0<<7)	/* Bit  8.. 7:	no Pause Mode */
#define PHY_M_P_SYM_MD_X	(1<<7)	/* Bit  8.. 7:	symmetric Pause Mode */
#define PHY_M_P_ASYM_MD_X	(2<<7)	/* Bit  8.. 7:	asymmetric Pause Mode */
#define PHY_M_P_BOTH_MD_X	(3<<7)	/* Bit  8.. 7:	both Pause Mode */

/*****  PHY_MARV_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
#define PHY_M_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
#define PHY_M_1000C_MSE		(1<<12)	/* Bit 12:	Manual Master/Slave Enable */
#define PHY_M_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration (1=Master) */
#define PHY_M_1000C_MPD		(1<<10)	/* Bit 10:	Multi-Port Device */
#define PHY_M_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
#define PHY_M_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
									/* Bit  7..0:	reserved */

/*****  PHY_MARV_PHY_CTRL	16 bit r/w	PHY Specific Ctrl Reg *****/

#define PHY_M_PC_TX_FFD_MSK	(3<<14)	/* Bit 15..14:	Tx FIFO Depth Mask */
#define PHY_M_PC_RX_FFD_MSK	(3<<12)	/* Bit 13..12:	Rx FIFO Depth Mask */
#define PHY_M_PC_ASS_CRS_TX	(1<<11)	/* Bit 11:	Assert CRS on Transmit */
#define PHY_M_PC_FL_GOOD	(1<<10)	/* Bit 10:	Force Link Good */
#define PHY_M_PC_EN_DET_MSK	(3<<8)	/* Bit  9.. 8:	Energy Detect Mask */
#define PHY_M_PC_ENA_EXT_D	(1<<7)	/* Bit  7:	Enable Ext. Distance (10BT) */
#define PHY_M_PC_MDIX_MSK	(3<<5)	/* Bit  6.. 5:	MDI/MDIX Config. Mask */
#define PHY_M_PC_DIS_125CLK	(1<<4)	/* Bit  4:	Disable 125 CLK */
#define PHY_M_PC_MAC_POW_UP	(1<<3)	/* Bit  3:	MAC Power up */
#define PHY_M_PC_SQE_T_ENA	(1<<2)	/* Bit  2:	SQE Test Enabled */
#define PHY_M_PC_POL_R_DIS	(1<<1)	/* Bit  1:	Polarity Reversal Disabled */
#define PHY_M_PC_DIS_JABBER	(1<<0)	/* Bit  0:	Disable Jabber */

#define PHY_M_PC_MDI_XMODE(x)	SHIFT5(x)
#define PHY_M_PC_MAN_MDI	0	/* 00 = Manual MDI configuration */
#define PHY_M_PC_MAN_MDIX	1		/* 01 = Manual MDIX configuration */
#define PHY_M_PC_ENA_AUTO	3		/* 11 = Enable Automatic Crossover */

/*****  PHY_MARV_PHY_STAT	16 bit r/o	PHY Specific Status Reg *****/
#define PHY_M_PS_SPEED_MSK	(3<<14)	/* Bit 15..14:	Speed Mask */
#define PHY_M_PS_SPEED_1000	(1<<15)	/*       10 = 1000 Mbps */
#define PHY_M_PS_SPEED_100	(1<<14)	/*       01 =  100 Mbps */
#define PHY_M_PS_SPEED_10	0		/*       00 =   10 Mbps */
#define PHY_M_PS_FULL_DUP	(1<<13)	/* Bit 13:	Full Duplex */
#define PHY_M_PS_PAGE_REC	(1<<12)	/* Bit 12:	Page Received */
#define PHY_M_PS_SPDUP_RES	(1<<11)	/* Bit 11:	Speed & Duplex Resolved */
#define PHY_M_PS_LINK_UP	(1<<10)	/* Bit 10:	Link Up */
#define PHY_M_PS_CABLE_MSK	(3<<7)	/* Bit  9.. 7:	Cable Length Mask */
#define PHY_M_PS_MDI_X_STAT	(1<<6)	/* Bit  6:	MDI Crossover Stat (1=MDIX) */
#define PHY_M_PS_DOWNS_STAT	(1<<5)	/* Bit  5:	Downshift Status (1=downsh.) */
#define PHY_M_PS_ENDET_STAT	(1<<4)	/* Bit  4:	Energy Detect Status (1=act) */
#define PHY_M_PS_TX_P_EN	(1<<3)	/* Bit  3:	Tx Pause Enabled */
#define PHY_M_PS_RX_P_EN	(1<<2)	/* Bit  2:	Rx Pause Enabled */
#define PHY_M_PS_POL_REV	(1<<1)	/* Bit  1:	Polarity Reversed */
#define PHY_M_PC_JABBER		(1<<0)	/* Bit  0:	Jabber */

#define PHY_M_PS_PAUSE_MSK	(PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)

/*****  PHY_MARV_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
/*****  PHY_MARV_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
#define PHY_M_IS_AN_ERROR	(1<<15)	/* Bit 15:	Auto-Negotiation Error */
#define PHY_M_IS_LSP_CHANGE	(1<<14)	/* Bit 14:	Link Speed Changed */
#define PHY_M_IS_DUP_CHANGE	(1<<13)	/* Bit 13:	Duplex Mode Changed */
#define PHY_M_IS_AN_PR		(1<<12)	/* Bit 12:	Page Received */
#define PHY_M_IS_AN_COMPL	(1<<11)	/* Bit 11:	Auto-Negotiation Completed */
#define PHY_M_IS_LST_CHANGE	(1<<10)	/* Bit 10:	Link Status Changed */
#define PHY_M_IS_SYMB_ERROR	(1<<9)	/* Bit  9:	Symbol Error */
#define PHY_M_IS_FALSE_CARR	(1<<8)	/* Bit  8:	False Carrier */
#define PHY_M_IS_FIFO_ERROR	(1<<7)	/* Bit  7:	FIFO Overflow/Underrun Error */
#define PHY_M_IS_MDI_CHANGE	(1<<6)	/* Bit  6:	MDI Crossover Changed */
#define PHY_M_IS_DOWNSH_DET	(1<<5)	/* Bit  5:	Downshift Detected */
#define PHY_M_IS_END_CHANGE	(1<<4)	/* Bit  4:	Energy Detect Changed */
									/* Bit  3..2:	reserved */
#define PHY_M_IS_POL_CHANGE	(1<<1)	/* Bit  1:	Polarity Changed */
#define PHY_M_IS_JABBER		(1<<0)	/* Bit  0:	Jabber */

#define PHY_M_DEF_MSK		(PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
							PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)

/*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
#define PHY_M_EC_M_DSC_MSK	(3<<10)	/* Bit 11..10:	Master downshift counter */
#define PHY_M_EC_S_DSC_MSK	(3<<8)	/* Bit  9.. 8:	Slave  downshift counter */
#define PHY_M_EC_MAC_S_MSK	(7<<4)	/* Bit  6.. 4:	Def. MAC interface speed */

#define PHY_M_EC_M_DSC(x)		SHIFT10(x)	/* 00=1x; 01=2x; 10=3x; 11=4x */
#define PHY_M_EC_S_DSC(x)		SHIFT8(x)	/* 00=dis; 01=1x; 10=2x; 11=3x */
#define PHY_M_EC_MAC_S(x)		SHIFT4(x)	/* 01X=0; 110=2.5; 111=25 (MHz) */

#define MAC_TX_CLK_0_MHZ	2
#define MAC_TX_CLK_2_5_MHZ	6
#define MAC_TX_CLK_25_MHZ	7

/*****  PHY_MARV_LED_CTRL	16 bit r/w	LED Control Reg *****/
#define PHY_M_LEDC_DIS_LED	(1<<15)	/* Bit 15:	Disable LED */
#define PHY_M_LEDC_PULS_MSK	(7<<12)	/* Bit 14..12:  Pulse Stretch Mask */
#define PHY_M_LEDC_F_INT	(1<<11)	/* Bit 11:	Force Interrupt */
#define PHY_M_LEDC_BL_R_MSK	(7<<8)	/* Bit 10.. 8:  Blink Rate Mask */
									/* Bit  7.. 5:	reserved */
#define PHY_M_LEDC_LINK_MSK	(3<<3)	/* Bit  4.. 3:	Link Control Mask */
#define PHY_M_LEDC_DP_CTRL	(1<<2)	/* Bit  2:	Duplex Control */
#define PHY_M_LEDC_RX_CTRL	(1<<1)	/* Bit  1:	Rx activity / Link */
#define PHY_M_LEDC_TX_CTRL	(1<<0)	/* Bit  0:	Tx activity / Link */

#define PHY_M_LED_PULS_DUR(x)	SHIFT12(x)	/* Pulse Stretch Duration */

#define	PULS_NO_STR		0		/* no pulse stretching */
#define	PULS_21MS		1		/* 21 ms to 42 ms */
#define PULS_42MS		2		/* 42 ms to 84 ms */
#define PULS_84MS		3		/* 84 ms to 170 ms */
#define PULS_170MS		4		/* 170 ms to 340 ms */
#define PULS_340MS		5		/* 340 ms to 670 ms */
#define PULS_670MS		6		/* 670 ms to 1.3 s */
#define PULS_1300MS		7		/* 1.3 s to 2.7 s */

#define PHY_M_LED_BLINK_RT(x)	SHIFT8(x)	/* Blink Rate */

#define BLINK_42MS		0		/* 42 ms */
#define BLINK_84MS		1		/* 84 ms */
#define BLINK_170MS		2		/* 170 ms */
#define BLINK_340MS		3		/* 340 ms */
#define BLINK_670MS		4		/* 670 ms */
								/* values 5 - 7: reserved */

/*****  PHY_MARV_LED_OVER	16 bit r/w	Manual LED Override Reg *****/
#define PHY_M_LED_MO_DUP(x)		SHIFT10(x)	/* Bit 11..10:  Duplex */
#define PHY_M_LED_MO_10(x)		SHIFT8(x)	/* Bit  9.. 8:  Link 10 */
#define PHY_M_LED_MO_100(x)		SHIFT6(x)	/* Bit  7.. 6:  Link 100 */
#define PHY_M_LED_MO_1000(x)	SHIFT4(x)	/* Bit  5.. 4:  Link 1000 */
#define PHY_M_LED_MO_RX(x)		SHIFT2(x)	/* Bit  3.. 2:  Rx */
#define PHY_M_LED_MO_TX(x)		SHIFT0(x)	/* Bit  1.. 0:  Tx */

#define MO_LED_NORM			0
#define MO_LED_BLINK		1
#define MO_LED_OFF			2
#define MO_LED_ON			3

/*****  PHY_MARV_EXT_CTRL_2	16 bit r/w	Ext. PHY Specific Ctrl 2 *****/
									/* Bit 15.. 7:	reserved */
#define PHY_M_EC2_FI_IMPED	(1<<6)	/* Bit  6:	Fiber Input  Impedance */
#define PHY_M_EC2_FO_IMPED	(1<<5)	/* Bit  5:	Fiber Output Impedance */
#define PHY_M_EC2_FO_M_CLK	(1<<4)	/* Bit  4:	Fiber Mode Clock Enable */
#define PHY_M_EC2_FO_BOOST	(1<<3)	/* Bit  3:	Fiber Output Boost */
#define PHY_M_EC2_FO_AM_MSK	7		/* Bit  2.. 0:	Fiber Output Amplitude */

/*****  PHY_MARV_CABLE_DIAG	16 bit r/o	Cable Diagnostic Reg *****/
#define PHY_M_CABD_ENA_TEST	(1<<15)	/* Bit 15:	Enable Test */
#define PHY_M_CABD_STAT_MSK	(3<<13)	/* Bit 14..13:	Status */
									/* Bit 12.. 8:	reserved */
#define PHY_M_CABD_DIST_MSK	0xff	/* Bit  7.. 0:	Distance */

/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
#define CABD_STAT_NORMAL	0
#define CABD_STAT_SHORT		1
#define CABD_STAT_OPEN		2
#define CABD_STAT_FAIL		3


/*
 * GMAC registers
 *
 * The GMAC registers are 16 or 32 bits wide.
 * The GMACs host processor interface is 16 bits wide,
 * therefore ALL registers will be addressed with 16 bit accesses.
 *
 * The following macros are provided to access the GMAC registers
 * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(),
 * GM_INHASH(), and GM_OUTHASH().
 * The macros are defined in SkGeHw.h.
 *
 * Note:	NA reg	= Network Address e.g DA, SA etc.
 *
 */

/* Port Registers */
#define GM_GP_STAT		0x0000		/* 16 bit r/o	General Purpose Status */
#define GM_GP_CTRL		0x0004		/* 16 bit r/w	General Purpose Control */
#define GM_TX_CTRL		0x0008		/* 16 bit r/w	Transmit Control Reg. */
#define GM_RX_CTRL		0x000c		/* 16 bit r/w	Receive Control Reg. */
#define GM_TX_FLOW_CTRL	0x0010		/* 16 bit r/w	Transmit Flow Control */
#define GM_TX_PARAM		0x0014		/* 16 bit r/w	Transmit Parameter Reg. */
#define GM_SERIAL_MODE	0x0018		/* 16 bit r/w	Serial Mode Register */

/* Source Address Registers */
#define GM_SRC_ADDR_1L	0x001c		/* 16 bit r/w	Source Address 1 (low) */
#define GM_SRC_ADDR_1M	0x0020		/* 16 bit r/w	Source Address 1 (middle) */
#define GM_SRC_ADDR_1H	0x0024		/* 16 bit r/w	Source Address 1 (high) */
#define GM_SRC_ADDR_2L	0x0028		/* 16 bit r/w	Source Address 2 (low) */
#define GM_SRC_ADDR_2M	0x002c		/* 16 bit r/w	Source Address 2 (middle) */
#define GM_SRC_ADDR_2H	0x0030		/* 16 bit r/w	Source Address 2 (high) */

/* Multicast Address Hash Registers */
#define GM_MC_ADDR_H1	0x0034		/* 16 bit r/w	Multicast Address Hash 1 */
#define GM_MC_ADDR_H2	0x0038		/* 16 bit r/w	Multicast Address Hash 2 */
#define GM_MC_ADDR_H3	0x003c		/* 16 bit r/w	Multicast Address Hash 3 */
#define GM_MC_ADDR_H4	0x0040		/* 16 bit r/w	Multicast Address Hash 4 */

/* Interrupt Source Registers */
#define GM_TX_IRQ_SRC	0x0044		/* 16 bit r/o	Tx Overflow IRQ Source */
#define GM_RX_IRQ_SRC	0x0048		/* 16 bit r/o	Rx Overflow IRQ Source */
#define GM_TR_IRQ_SRC	0x004c		/* 16 bit r/o	Tx/Rx Over. IRQ Source */

/* Interrupt Mask Registers */
#define GM_TX_IRQ_MSK	0x0050		/* 16 bit r/w	Tx Overflow IRQ Mask */
#define GM_RX_IRQ_MSK	0x0054		/* 16 bit r/w	Rx Overflow IRQ Mask */
#define GM_TR_IRQ_MSK	0x0058		/* 16 bit r/w	Tx/Rx Over. IRQ Mask */

/* Serial Management Interface (SMI) Registers */
#define GM_SMI_CTRL		0x0080		/* 16 bit r/w	SMI Control Register */
#define GM_SMI_DATA		0x0084		/* 16 bit r/w	SMI Data Register */
#define GM_PHY_ADDR		0x0088		/* 16 bit r/w	GPHY Address Register */

/* MIB Counters */
#define GM_MIB_CNT_BASE	0x0100		/* Base Address of MIB Counters */
#define GM_MIB_CNT_SIZE	44			/* Number of MIB Counters */

/*
 * MIB Counters base address definitions (low word) -
 * use offset 4 for access to high word	(32 bit r/o)
 */
#define GM_RXF_UC_OK \
			(GM_MIB_CNT_BASE + 0)	/* Unicast Frames Received OK */
#define GM_RXF_BC_OK \
			(GM_MIB_CNT_BASE + 8)	/* Broadcast Frames Received OK */
#define GM_RXF_MPAUSE \
			(GM_MIB_CNT_BASE + 16)	/* Pause MAC Ctrl Frames Received */
#define GM_RXF_MC_OK \
			(GM_MIB_CNT_BASE + 24)	/* Multicast Frames Received OK */
#define GM_RXF_FCS_ERR \
			(GM_MIB_CNT_BASE + 32)	/* Rx Frame Check Seq. Error */
	/* GM_MIB_CNT_BASE + 40:	reserved */
#define GM_RXO_OK_LO \
			(GM_MIB_CNT_BASE + 48)	/* Octets Received OK Low */
#define GM_RXO_OK_HI \
			(GM_MIB_CNT_BASE + 56)	/* Octets Received OK High */
#define GM_RXO_ERR_LO \
			(GM_MIB_CNT_BASE + 64)	/* Octets Received Invalid Low */
#define GM_RXO_ERR_HI \
			(GM_MIB_CNT_BASE + 72)	/* Octets Received Invalid High */
#define GM_RXF_SHT \
			(GM_MIB_CNT_BASE + 80)	/* Frames <64 Byte Received OK */
#define GM_RXE_FRAG \
			(GM_MIB_CNT_BASE + 88)	/* Frames <64 Byte Receeived with FCS Err */
#define GM_RXF_64B \
			(GM_MIB_CNT_BASE + 96)	/* 64 Byte Rx Frame */
#define GM_RXF_127B \
			(GM_MIB_CNT_BASE + 104)	/* 65-127 Byte Rx Frame */
#define GM_RXF_255B \
			(GM_MIB_CNT_BASE + 112)	/* 128-255 Byte Rx Frame */
#define GM_RXF_511B \
			(GM_MIB_CNT_BASE + 120)	/* 256-511 Byte Rx Frame */
#define GM_RXF_1023B \
			(GM_MIB_CNT_BASE + 128)	/* 512-1023 Byte Rx Frame */
#define GM_RXF_1518B \
			(GM_MIB_CNT_BASE + 136)	/* 1024-1518 Byte Rx Frame */
#define GM_RXF_MAX_SZ \
			(GM_MIB_CNT_BASE + 144)	/* 1519-MaxSize Byte Rx Frame */
#define GM_RXF_LNG_ERR \
			(GM_MIB_CNT_BASE + 152)	/* Rx Frame too Long Error */
#define GM_RXF_JAB_PKT \
			(GM_MIB_CNT_BASE + 160)	/* Rx Jabber Packet Frame */
	/* GM_MIB_CNT_BASE + 168:	reserved */
#define GM_RXE_FIFO_OV \
			(GM_MIB_CNT_BASE + 176)	/* Rx FIFO overflow Event */
	/* GM_MIB_CNT_BASE + 184:	reserved */
#define GM_TXF_UC_OK \
			(GM_MIB_CNT_BASE + 192)	/* Unicast Frames Xmitted OK */
#define GM_TXF_BC_OK \
			(GM_MIB_CNT_BASE + 200)	/* Broadcast Frames Xmitted OK */
#define GM_TXF_MPAUSE \
			(GM_MIB_CNT_BASE + 208)	/* Pause MAC Ctrl Frames Xmitted */
#define GM_TXF_MC_OK \
			(GM_MIB_CNT_BASE + 216)	/* Multicast Frames Xmitted OK */
#define GM_TXO_OK_LO \
			(GM_MIB_CNT_BASE + 224)	/* Octets Transmitted OK Low */
#define GM_TXO_OK_HI \
			(GM_MIB_CNT_BASE + 232)	/* Octets Transmitted OK High */
#define GM_TXF_64B \
			(GM_MIB_CNT_BASE + 240)	/* 64 Byte Tx Frame */
#define GM_TXF_127B \
			(GM_MIB_CNT_BASE + 248)	/* 65-127 Byte Tx Frame */
#define GM_TXF_255B \
			(GM_MIB_CNT_BASE + 256)	/* 128-255 Byte Tx Frame */
#define GM_TXF_511B \
			(GM_MIB_CNT_BASE + 264)	/* 256-511 Byte Tx Frame */
#define GM_TXF_1023B \
			(GM_MIB_CNT_BASE + 272)	/* 512-1023 Byte Tx Frame */
#define GM_TXF_1518B \
			(GM_MIB_CNT_BASE + 280)	/* 1024-1518 Byte Tx Frame */
#define GM_TXF_MAX_SZ \
			(GM_MIB_CNT_BASE + 288)	/* 1519-MaxSize Byte Tx Frame */
	/* GM_MIB_CNT_BASE + 296:	reserved */
#define GM_TXF_COL \
			(GM_MIB_CNT_BASE + 304)	/* Tx Collision */
#define GM_TXF_LAT_COL \
			(GM_MIB_CNT_BASE + 312)	/* Tx Late Collision */
#define GM_TXF_ABO_COL \
			(GM_MIB_CNT_BASE + 320)	/* Tx aborted due to Exces. Col. */
#define GM_TXF_MUL_COL \
			(GM_MIB_CNT_BASE + 328)	/* Tx Multiple Collision */
#define GM_TXF_SNG_COL \
			(GM_MIB_CNT_BASE + 336)	/* Tx Single Collision */
#define GM_TXE_FIFO_UR \
			(GM_MIB_CNT_BASE + 344)	/* Tx FIFO Underrun Event */

/*----------------------------------------------------------------------------*/
/*
 * GMAC Bit Definitions
 *
 * If the bit access behaviour differs from the register access behaviour
 * (r/w, r/o) this is documented after the bit number.
 * The following bit access behaviours are used:
 *	(sc)	self clearing
 *	(r/o)	read only
 */

/*	GM_GP_STAT	16 bit r/o	General Purpose Status Register */

#define GM_GPSR_SPEED		(1<<15) /* Bit 15:	Port Speed (1 = 100 Mbps) */
#define GM_GPSR_DUPLEX		(1<<14) /* Bit 14:	Duplex Mode (1 = Full) */
#define GM_GPSR_FC_TX_DIS	(1<<13) /* Bit 13:	Tx Flow Control Mode Disabled */
#define GM_GPSR_LINK_UP		(1<<12)	/* Bit 12:	Link Up Status */
#define GM_GPSR_PAUSE		(1<<11)	/* Bit 11:	Pause State */
#define GM_GPSR_TX_ACTIVE	(1<<10)	/* Bit 10:	Tx in Progress */
#define GM_GPSR_EXC_COL		(1<<9)	/* Bit  9:	Excessive Collisions Occured */
#define GM_GPSR_LAT_COL		(1<<8)	/* Bit  8:	Late Collisions Occured */
								/* Bit  7..6:	reserved */
#define GM_GPSR_PHY_ST_CH	(1<<5)	/* Bit  5:	PHY Status Change */
#define GM_GPSR_GIG_SPEED	(1<<4)	/* Bit  4:	Gigabit Speed (1 = 1000 Mbps) */
#define GM_GPSR_PART_MODE	(1<<3)	/* Bit  3:	Partition mode */
#define GM_GPSR_FC_RX_DIS	(1<<2)	/* Bit  2:	Rx Flow Control Mode Disabled */
#define GM_GPSR_PROM_EN		(1<<1)	/* Bit  1:	Promiscuous Mode Enabled */
								/* Bit  0:	reserved */

/*	GM_GP_CTRL	16 bit r/w	General Purpose Control Register */
								/* Bit 15:	reserved */
#define GM_GPCR_PROM_ENA	(1<<14)	/* Bit 14:	Enable Promiscuous Mode */
#define GM_GPCR_FC_TX_DIS	(1<<13) /* Bit 13:	Disable Tx Flow Control Mode */
#define GM_GPCR_TX_ENA		(1<<12) /* Bit 12:	Enable Transmit */
#define GM_GPCR_RX_ENA		(1<<11) /* Bit 11:	Enable Receive */
#define GM_GPCR_BURST_ENA	(1<<10)	/* Bit 10:	Enable Burst Mode */
#define GM_GPCR_LOOP_ENA	(1<<9)	/* Bit  9:	Enable MAC Loopback Mode */
#define GM_GPCR_PART_ENA	(1<<8)	/* Bit  8:	Enable Partition Mode */
#define GM_GPCR_GIGS_ENA	(1<<7)	/* Bit  7:	Gigabit Speed (1000 Mbps) */
#define GM_GPCR_FL_PASS		(1<<6)	/* Bit  6:	Force Link Pass */
#define GM_GPCR_DUP_FULL	(1<<5)	/* Bit  5:	Full Duplex Mode */
#define GM_GPCR_FC_RX_DIS	(1<<4)	/* Bit  4:	Disable Rx Flow Control Mode */
#define GM_GPCR_SPEED_100	(1<<3)  /* Bit  3:	Port Speed 100 Mbps */
#define GM_GPCR_AU_DUP_DIS	(1<<2)	/* Bit  2:	Disable Auto-Update for Duplex */
#define GM_GPCR_AU_FCT_DIS	(1<<1)	/* Bit  1:	Disable Auto-Update for Flow-c. */
#define GM_GPCR_AU_SPD_DIS	(1<<0)	/* Bit  0:	Disable Auto-Update for Speed */

#define GM_GPCR_SPEED_1000	(GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
#define GM_GPCR_AU_ALL_DIS	(GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
							 GM_GPCR_AU_SPD_DIS)

/*	GM_TX_CTRL				16 bit r/w	Transmit Control Register */

#define GM_TXCR_FORCE_JAM	(1<<15)	/* Bit 15:	Force Jam / Flow-Control */
#define GM_TXCR_CRC_DIS		(1<<14)	/* Bit 14:	Disable insertion of CRC */
#define GM_TXCR_PAD_DIS		(1<<13)	/* Bit 13:	Disable padding of packets */
#define GM_TXCR_COL_THR		(4<<10)	/* Bit 12..10:	Collision Threshold */

/*	GM_RX_CTRL				16 bit r/w	Receive Control Register */
#define GM_RXCR_UCF_ENA		(1<<15)	/* Bit 15:	Enable Unicast filtering */
#define GM_RXCR_MCF_ENA		(1<<14)	/* Bit 14:	Enable Multicast filtering */
#define GM_RXCR_CRC_DIS		(1<<13)	/* Bit 13:	Remove 4-byte CRC */
#define GM_RXCR_PASS_FC		(1<<12)	/* Bit 12:	Pass FC packets to FIFO */

/*	GM_TX_PARAM				16 bit r/w	Transmit Parameter Register */
#define GM_TXPA_JAMLEN_MSK	(0x03<<14)	/* Bit 15..14:	Jam Length */
#define GM_TXPA_JAMIPG_MSK	(0x1f<<9)	/* Bit 13..9:	Jam IPG */
#define GM_TXPA_JAMDAT_MSK	(0x1f<<4)	/* Bit  8..4:	IPG Jam to Data */
								/* Bit  3..0:	reserved */
#define JAM_LEN_VAL(x)		SHIFT14(x)
#define JAM_IPG_VAL(x)		SHIFT9(x)
#define IPG_JAM_DATA(x)		SHIFT4(x)

/*	GM_SERIAL_MODE			16 bit r/w	Serial Mode Register */
#define GM_SMOD_DATABL_MSK	(0x1f<<11)	/* Bit 15..11:	Data Blinder */
#define GM_SMOD_LIMIT_4		(1<<10)	/* Bit 10:	4 consecutive transmit trials */
#define GM_SMOD_VLAN_ENA	(1<<9)	/* Bit  9:	Enable VLAN  (Max. Frame Length) */
#define GM_SMOD_JUMBO_ENA	(1<<8)	/* Bit  8:	Enable Jumbo (Max. Frame Length) */
								/* Bit  7..5:	reserved */
#define GM_SMOD_IPG_MSK		0x1f	/* Bit 4..0:	Inter-Packet Gap (IPG) */

#define DATA_BLIND_VAL(x)	SHIFT11(x)
#define DATA_BLIND_FAST_ETH	0x1c
#define DATA_BLIND_GIGABIT	4

#define IPG_VAL_FAST_ETH	0x1e
#define IPG_VAL_GIGABIT		6

/*	GM_SMI_CTRL				16 bit r/w	SMI Control Register */

#define GM_SMI_CT_PHY_AD(x)	SHIFT11(x)
#define GM_SMI_CT_REG_AD(x)	SHIFT6(x)
#define GM_SMI_CT_OP_RD		(1<<5)	/* Bit  5:	OpCode Read (0=Write)*/
#define GM_SMI_CT_RD_VAL	(1<<4)	/* Bit  4:	Read Valid (Read completed) */
#define GM_SMI_CT_BUSY		(1<<3)	/* Bit  3:	Busy (Operation in progress) */
								/* Bit   2..0:	reserved */

/*	GM_PHY_ADDR				16 bit r/w	GPHY Address Register */
								/* Bit  15..6:	reserved */
#define GM_PAR_MIB_CLR		(1<<5)	/* Bit  5:	Set MIB Clear Counter Mode */
#define GM_PAR_MIB_TST		(1<<4)	/* Bit  4:	MIB Load Counter (Test Mode) */
								/* Bit   3..0:	reserved */

/* Receive Frame Status Encoding */
#define GMR_FS_LEN	(0xffffUL<<16)	/* Bit 31..16:	Rx Frame Length */
								/* Bit  15..14:	reserved */
#define GMR_FS_VLAN		(1L<<13)	/* Bit 13:	VLAN Packet */
#define GMR_FS_JABBER	(1L<<12)	/* Bit 12:	Jabber Packet */
#define GMR_FS_UN_SIZE	(1L<<11)	/* Bit 11:	Undersize Packet */
#define GMR_FS_MC		(1L<<10)	/* Bit 10:	Multicast Packet */
#define GMR_FS_BC		(1L<<9)		/* Bit  9:	Broadcast Packet */
#define GMR_FS_RX_OK	(1L<<8)		/* Bit  8:	Receive OK (Good Packet) */
#define GMR_FS_GOOD_FC	(1L<<7)		/* Bit  7:	Good Flow-Control Packet */
#define GMR_FS_BAD_FC	(1L<<6)		/* Bit  6:	Bad  Flow-Control Packet */
#define GMR_FS_MII_ERR	(1L<<5)		/* Bit  5:	MII Error */
#define GMR_FS_LONG_ERR	(1L<<4)		/* Bit  4:	Too Long Packet */
#define GMR_FS_FRAGMENT	(1L<<3)		/* Bit  3:	Fragment */
								/* Bit  2:	reserved */
#define GMR_FS_CRC_ERR	(1L<<1)		/* Bit  1:	CRC Error */
#define GMR_FS_RX_FF_OV	(1L<<0)		/* Bit  0:	Rx FIFO Overflow */

/*
 * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
 */
#define GMR_FS_ANY_ERR	(GMR_FS_CRC_ERR | \
			GMR_FS_LONG_ERR | \
			GMR_FS_MII_ERR | \
			GMR_FS_BAD_FC | \
			GMR_FS_GOOD_FC | \
			GMR_FS_JABBER)

/* Rx GMAC FIFO Flush Mask (default) */
#define RX_FF_FL_DEF_MSK	(GMR_FS_CRC_ERR | \
			GMR_FS_RX_FF_OV | \
			GMR_FS_MII_ERR | \
			GMR_FS_BAD_FC | \
			GMR_FS_GOOD_FC | \
			GMR_FS_UN_SIZE | \
			GMR_FS_JABBER)

/* typedefs *******************************************************************/


/* function prototypes ********************************************************/

#ifdef __cplusplus
}
#endif	/* __cplusplus */

#endif	/* __INC_XMAC_H */