buildroot.git/configs/raspberrypi2_defconfig, branch master

raspberrypi2_defconfig: bump kernel version to 4.4.43

2017-01-23T21:58:51+00:00

Signed-off-by: Peter Seiderer Signed-off-by: Peter Korsgaard

raspberrypi2_defconfig: bump kernel version to 4.4.36

2016-12-04T14:58:11+00:00

Signed-off-by: Peter Seiderer Signed-off-by: Thomas Petazzoni

raspberrypi2_defconfig: bump to kernel version 4.4.21

2016-09-23T05:59:58+00:00

Signed-off-by: Peter Seiderer Signed-off-by: Thomas Petazzoni

raspberrypi2_defconfig: bump to kernel version 4.4.8

2016-04-28T06:52:39+00:00

Signed-off-by: Benoît Mauduit Signed-off-by: Peter Korsgaard

raspberrypi2_defconfig: bump to kernel version 4.4.7

2016-04-23T19:24:17+00:00

Signed-off-by: Peter Seiderer Signed-off-by: Thomas Petazzoni

raspberrypi, raspberrypi2: add a serial console

2016-04-18T11:36:11+00:00

The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2 instantiate a console on tty1, which appears on HDMI. Add a console on the serial port (ttyAMA0) to be more consistent with other defconfigs and provide a better out-of-the-box experience to users used to have a serial console from Buildroot defconfigs. This requires three changes: 1. have two 'console=' entries in the kernel command line: tty1, then ttyAMA0; 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts a getty on the last console= passed to the kernel, ttyAMA0; 3. add a new getty on tty1 to the generated inittab. Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT entirely from the defconfigs, since "console" is the default value. Step 3 requires a post-build script since the Buildroot makefiles can configure only one console. Note: instead of simply adding a new getty on ttyAMA0 (which would work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to instantiate a console on UART, then adds back tty1 via post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment where we instantiate an HDMI console, then instantiate a really-serial console on another line. The result is these two inittab lines: console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console Cc: Yann E. MORIN Cc: Arnout Vandecappelle Signed-off-by: Luca Ceresoli Reviewed-by: "Yann E. MORIN" Signed-off-by: Thomas Petazzoni

configs/raspberrypi2_defconfig: configure eth0 through dhcp

2016-04-15T08:17:18+00:00

The rpi2 board has an ethernet port, so configure it at startup. Signed-off-by: Peter Korsgaard

linux: use zImage by default on ARM

2016-04-05T20:23:54+00:00

Since quite some time, the kernel and bootloader communities consider zImage as the default format for kernel images on ARM, replacing uImage. The load address information in uImage is no longer needed, since the kernel is position-independent in terms of physical address, except on a few old platforms. For most people, using zImage is simply better/simpler, so let's switch to zImage as the default image format on ARM. All defconfigs are updated: 46 defconfigs no longer need to select explicitly zImage because it's the default, and 16 defconfigs now need to explicitly select uImage because that's no longer the default. Signed-off-by: Thomas Petazzoni Reviewed-by: Matt Weber Acked-by: Julien Boibessot Signed-off-by: Peter Korsgaard

defconfigs: all use the headers from the kernel

2016-02-06T09:59:15+00:00

For most defconfigs, it was trivial to deduce the kernel version, by just reading the version string, which could be: - a standard upstream version string vX.Y.Z - a non-standard version string, but still containg the standard X.Y.Z Those for which it was not so trivial were those hosted on git tree. Since most were already using a custom linux-headers version, it could be easily deduced from that. It was confirmed by browsing said git trees and check the version there. There are a few cases were there was a mismatch: - microzed: uses a 3.18 kernel, but 3.8 headers; fixed. - xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed. - zedboard: uses a 3.18 kernel, but 3.8 headers; fixed. Signed-off-by: "Yann E. MORIN" Cc: Thomas Petazzoni Cc: Peter Korsgaard Cc: Gustavo Zacarias Signed-off-by: Thomas Petazzoni

configs/raspberrypi{,2}: bump to kernel version 4.1.15

2016-02-01T20:26:45+00:00

Signed-off-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard