configs/qmx6: remove defconfig

The original submitter and follow-up contributors to the qmx6
defconfig no longer have the hardware available or the time/interest
to update this defconfig, which currently fails to build with gcc
5.x. Due to this, this commit removes this defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

1 files changed, 0 insertions, 36 deletions

diff --git a/board/congatec/qmx6/readme.txt b/board/congatec/qmx6/readme.txt
deleted file mode 100644
index d2e0dcacb..000000000
--- a/board/congatec/qmx6/readme.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
-
-conga-QMX6 is based on the freescale iMX6 SoC. For more information please
-have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
-
-The configuration is based on the currently latest kernel release from
-Congatec's git repository which is based on 3.0.35. The bootloader u-boot
-is preconfigured on the CPU module and does not need to be replaced.
-
-To build the default configuration you only have to:
-
-	make qmx6_defconfig && make
-
-You will need a microSD card of sufficient size and the first or only
-partition configured as Linux type.
-
-To transfer the system to the card do:
-
-	$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
-
-You can optionally extend the filesystem size to the whole partition:
-
-	$ sudo resize2fs /dev/sdX1
-
-You can also update the card image without completely rewriting it:
-
-	$ sudo mount /dev/sdX1 /mnt
-	$ sudo tar xf output/images/rootfs.tar -C /mnt
-	$ sudo umount /mnt
-
-Connect a terminal program to the rs232 connector marked "CONSOLE"
-with baudrate set to 115200, insert the microSD card into the socket
-on the CPU module and power the board to watch the system boot.
-
-Booting from the SD card slot on the base board is currently not
-supported.