blob: 1e4820b828e592c47c43efe3e4a0366994bbbd9e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
Pandaboard
==========
This file documents the Buildroot support for the Pandaboard, a
low-power, low-cost single-board computer development platform based
on the Texas Instruments OMAP4 system on a chip (SoC).
Configuring and building Buildroot
----------------------------------
Start from the defconfig:
$ make pandaboard_defconfig
You can edit build options the usual way:
$ make menuconfig
When you are happy with the setup, run:
$ make
The result of the build with the default settings should be these files:
output/images
├── MLO
├── omap4-panda-a4.dtb
├── omap4-panda.dtb
├── omap4-panda-es.dtb
├── rootfs.ext4
├── sdcard.img
├── u-boot.img
└── zImage
How to write the SD card
------------------------
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX
instead depending on setup).
|
