Age | Commit message (Collapse) | Author |
|
Still some work needed there, but enough for rendercopy.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Directly taken from Mesa.
v2 (Ben): Updated copyright
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
This allows to use the same functions to validate operands on gen8 for
now.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
We should now support alu2 intructions with direct register addressing.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
I chose not to implement this in the same way as Zhao Yakui because I
was lazy.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
The code is from the storedw_loop_render.
v2 (by Ben): Flush on the correct ring
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
The code is from the storedw_loop_render.
v2 (by Ben): Flush on the correct Ring
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
support gen8 style blits
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
This provides a macro that allows us to update all the arbitrary blit
commands we have stuck throughout the code. It assumes we don't actually
use 64b relocs (which is currently true). This also allows us to easily find
all the areas we need to update later when we really use the upper dword.
This block was done mostly with a sed job, and represents the easier
in test blit implementations.
v2 by Oscar: s/OUT_BATCH/BEGIN_BATCH in BLIT_COPY_BATCH_START
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
This isnt useful in IGT, but it will allow us to keep the merge process
with libdrm simpler.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
|
|
Check on debugfs if PSR is supported by panel and matching all conditions in
hardware. In this case PSR must be enabled and performance counting increasing
v2: check if performance counter is really increasing.
v3: respect new naming convention
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This helps make sure that the GPU is really quiescent by getting
rid of any residual stuff.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Same thing that was done for prime_self_import.
v2: Move igt_drop_caches_set() call inside get_object_count() to make
it clearer why we want this.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We don't want a previously used object to be freed in the middle of a
before/after object counting operation (or we would get a "-1 objects
leaked" message). We have seen this happening, e.g., when a context
from a previous run dies, but its backing object is alive waiting for
a retire_work to kick in.
v2: Use igt_debugfs facilities for drop cache.
v3: Move igt_drop_caches_set() call inside get_object_count() to make
it clearer why we want this.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
I was a bit on the fence about the basic pipe CRC test since that
doesn't really test kms, but debug infrastructure in debugfs.
Otoh running this one for a full kms testrun is always good, to make
sure that all the other (real) CRC based tests work sanely.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Imo power management, power consumption and performance are tightly
enough coupled that we can throw them all into one bin.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Just a start and we need more work here. Some follow-up patches will
clear up some of the historical confusion.
While at it rename the pc8 "basic" test to "rte".
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
- Ignore build-aux/
- Cleanup ignores for assembler/
|
|
No one actually cares, everyone expects it to just work.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This is basically a "drop cache" interface to the igt_debugfs
facilities. Also, update existing users.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
A typo in the relocation tests made both sub-tests perform the
same action: drop *all* caches.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Yet another check for the library.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Requested by Paulo.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
In the past new testcases with subtest often forgot to add the call to
igt_exit at the end of their main() function. That is now caught with
a bit more obnoxious asserts, but it's still a nuissance.
This little igt_main macro takes care of that (and also of calling the
subtest machinery initialization code correctly).
If no one objects I'll roll this out for all the simple cases (i.e.
those tests that don't have additional argv parsing on top of the
subtest machinery).
v2: Roll it out across the board.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Most callers didn't bother checking, so just move the asserts into
the function itself.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
All tests agree that this is a letal failure, so no point
to pass it back to callers.
Also add some igt_require calls for the drm_fd where I've
noticed that it's missing.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
No need to sprinkle this all over:
- exit handlers will only be registered once
- they're always called when exiting, so no need to explictly call
them.
This allows us to hide all the pipe crc cleanup in the library.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Otherwise the automagic skipping for DP ports on gmch platforms
won't work.
v2: We also need to just skip that connector, not the entire subtest.
kms_cursor_crc still needs to be updated.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Makes stuff work on DP ports on gmch platforms automatically.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|