| Age | Commit message (Collapse) | Author |
|---|
|
Simple test which exercises the VME fixed function block.
v2: (Tvrtko Ursulin)
* Small cleanups like copyright date, tabs, remove unused bits.
v3: (Tony Ye)
* Added curbe data entry for dst surface.
* Read the dst surface after the VME kernel being executed.
v4: (Tony Ye)
* Added the media_vme.gxa kernel source code and compile instructions.
v5: (Tvrtko Ursulin)
* Added hang detector.
v6: (Tvrtko Ursulin)
* Replace gem_read with gem_sync. (Chris Wilson)
Signed-off-by: Tony Ye <tony.ye@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We want to allow bpp = 8 or 16, so make sure we set the bpp
in igt_buf. This way we can extend rendercopy to support
other values for bpp.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Fix double ;; (Ville]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
This patch introduces a render copy shader for GEN11.
The plumbing is same as with GEN9, so we can reuse it, extracting the
common parts, and wrapping it in GEN-specific helpers.
v2: Added gen11 shader source path next to its binary form
Signed-off-by: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Katarzyna Dec <katarzyna.dec@intel.com>
Reviewed-by: Katarzyna Dec <katarzyna.dec@intel.com>
|
|
Added gen11_gpgpu_fillfunc to have gpgpu_fill passing on Gen11.
Gpgpu shader was generated using IGA (Intel Graphics Assembler)
based on binary found in lib/gpgpu_fill.c to match the
changes in Gen11 HW:
Changed 'mul' instruction to 'shl' (since Gen11 'mul' does
not support integer values for both src and dest).
Changed SEND message descriptor (it should have length 2 not 3).
Cc: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Katarzyna Dec <katarzyna.dec@intel.com>
Signed-off-by: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Acked-by: Katarzyna Dec <katarzyna.dec@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We can reuse gen9 mediafill function, because no changes
are required to support Gen11.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Katarzyna Dec <katarzyna.dec@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Katarzyna Dec <katarzyna.dec@intel.com>
Acked-by: Katarzyna Dec <katarzyna.dec@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add rendercopy implementation for gen4/5. Basic structure
copied from the gen6 implementation, and the gen4/5 specific
bits were mostly lifted from sna.
v2: Renamed registers definitions, which are GEN4 specific
to include that prefix (Lukasz)
v3: Rebase and checkpatch
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Cc: Katarzyna Dec <katarzyna.dec@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Katarzyna Dec <katarzyna.dec@intel.com>
|
|
No one generally needs to modify the igt_bufs we pass around,
so make them const.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This is just a simple change to reflect the actual state. No rewording
yet, just a simple substitution in most visible places - docs, README
and paths.
There are probably some leftovers here and there, but we can let them be
for now, this is already well overdue.
v2: fixed couple of obvious leftovers pointed out by Petri
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
|
|
Gen8lp function are duplicates of Gen8 with difference in
emit_media_objects - we cannot perform media_state_flush on CHT.
Similar changes were done previously for gpgpu_fill and media_fill.
v2: replaced IS_BRW and IS_CHT with IS_GEN8
v3: removed remaining 8lp spin function
Signed-off-by: Katarzyna Dec <katarzyna.dec@intel.com>
Cc: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
|
|
Removed some trailing white spaces.
Signed-off-by: Antonio Argenziano <antonio.argenziano@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Batch functions were copy/pasted across several libs.
With moving it into intel_batchbuffer lib test can now be
easly maintained without worrying that we forgot to modify
older version of lib.
v2: Added documentation into lib and rebased patch
v3: Fixed typos and rebased patch
v4: Fixed documentation issues
v5: Rename, clean up of leftovers from previous version
and documentation polishing
v6: Fixing assert
Signed-off-by: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Cc: Katarzyna Dec <katarzyna.dec@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Katarzyna Dec <katarzyna.dec@intel.com>
|
|
Media fill function can be reused on Gen10. Code has not
changed. Let's reuse gen9.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Katarzyna Dec <katarzyna.dec@intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
|
|
After moving all functions needed for gpgpu and media fill testing
there is a lot of duplications which can be removed:
Library media_fill_gen8 and media_fill_gen8lp for CHT was removed,
media state flush for !CHT was added to gen7_emit_media_objects.
Many gen8 functions were replaced with gen7 version with devid
parameter (gen7_fill_curbe_load, gen7_emit_interface_descriptor,
gen7_fill_binding_table, gen7_emit_media_objects). Unified fill kernel
function so it is applicable to all gens and both media and gpgpu
(merged gen7_fill_media_kernel and gen8_fill_media_kernel).
Duplicated constants like GEN8_MEDIA_VFE_STATE, GEN8_MEDIA_CURBE_LOAD,
GEN8_MEDIA_INTERFACE_DESCRIPTOR_LOAD, GEN8_MEDIA_OBJECT were
replaced by GEN7 version. However this constants were not removed
from gen8_media.h library, because they are used by other tests
for Gen8+. More refactoring in this gen*_media.h libraries is needed.
It seems that further unification of *_fillfunc functions will
introduce more confusion in understanding what the tests are doing
and what were changes between Gens.
v2: Moved some reduntant changes from Move gpgpu/media fill to gpu_fill...
to this patch. Applied comments from review.
v3: rebase
Signed-off-by: Katarzyna Dec <katarzyna.dec@intel.com>
Cc: Lukasz Kalamarz <lukasz.kalamarz@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
|
|
Nothing uses this currently, but other copy functions have the same delta now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Adding a delta offset will allow us to copy planar framebuffers with this
function.
Changes since v1:
- Set src and destination addresses to the delta, in case BO is mapped at offset 0.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com> #v1
|
|
When drawing with cairo to Y/Yf tiled FBs we use a temporary linear
buffer which is mapped to the CPU, but the fast blit needed for this
only expects 32 bpp FBs. Add support for other bpps too.
This is needed for upcoming patches testing non-32bit bpp formats with
Y/Yf tiling.
Thanks to Ville for explaining why we need the temporary buffer. (Looks
like for Y tiling we could do without, but that's a separate topic.)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
|
|
None of the fields we use on render_copy and gpgpu_fill has changed
when compared to gen9. So let's reuse them.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
SKL changed state base address command.
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Dominik Zeromski <dominik.zeromski@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
BDW changed structure of surface state and interface descriptors.
Commands like state base address, gpgpu walker were extended.
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Dominik Zeromski <dominik.zeromski@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
The gpgpu fill utility functions are used in separate test so it's
logical to keep them in separate file. This is similar to what media
spin test did in the past.
Functionally only gpgpu kernel changed. Send instruction payload size
was reduced. Since offset is incremented by 0x10 bytes there is no point
in using larger writes.
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Dominik Zeromski <dominik.zeromski@intel.com>
[Thomas: Fix typo of gpgpu_fill.h in Makefile.sources]
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Looks better!
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
The media spin utility is derived from media fill. The purpose
is to create a simple means to keep the render engine (media
pipeline) busy for a controlled amount of time. It does so by
emitting a batch with a single execution thread that spins in
a tight loop the requested number of times. Each spin increments
a counter whose final 32-bit value is written to the destination
buffer on completion for checking. The implementation supports
Gen8, Gen8lp, and Gen9.
v2: Apply the recommendations of igt.cocci.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Tested-by: Lei Liu <lei.a.liu@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
intel_batchbuffer.c: In function 'fill_object':
intel_batchbuffer.c:589:20: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
obj->relocs_ptr = (uint64_t)relocs;
^
intel_batchbuffer.c: In function 'exec_blit':
intel_batchbuffer.c:598:21: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
exec.buffers_ptr = (uint64_t)objs;
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
So we can use it with bare kernel types, without going through libdrm
bos.
v2: Don't forget the object handle. (Tvrtko)
Correct surface pitch calculation. (Tvrtko)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Again, these helpers will be useful for a raw version of the gen9 fast
copy.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
So we can use this function in a "raw" (ie without igt_buf) version.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
v2: Adjust for BB handling changes. (Tvrtko Ursulin)
Correct XY_FAST_COPY_DST_TILING_Yf. (Tvrtko Ursulin)
v3: New tiling modes are not defined in the kernel any more. (Tvrtko Ursulin)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
This is to add fill operation using GPGPU pipeline which is similar to
current media fill. This can be used to simply verify GPGPU pipeline
and help to enable it on newer HW, currently it works on Gen7 only and
will add support on later platform.
Now this sets very simply thread group dispatch for one thread per
thread group on SIMD16 dispatch. So the fill shader just uses thread
group ID for buffer offset.
v2: No new fill func typedef but adapt to igt_fillfunc_t.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This makes fill function more general to prepare for other
fill method using GPGPU pipeline.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
[Ben: Reordered if tree]
Signed-off-by: Ben Widawsky <benjamin.widawsky@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Load up both rings with lots of fighting between multiple contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Since relocations are variable size, depending upon generation, it is
easier to handle the resizing of the batch request inside the
BEGIN_BATCH macro. This still leaves us with having to resize commands
in a few places - which still need adaption for gen8+.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This reveal that quite a few locations were writing relocation offsets
but only allowing for 32 bit addresses. To reveal such places in active
tests, we also now double check that we do not use more batch space than
declared.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Assert that the source/destination bounds are within the pitch and size
of the associated bo.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Reduce lookups and improve code clarity.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Stragglers.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Enable gem_media_fill test for CHV platform. In addition to differences in
media IP blocks from Broadwell, the command sequence also differs for
programming the media pipeline, e.g., should not send a MEDIA_STATE_FLUSH
right before the MI_BATCH_BUFFER_END of batch buffers using MEDIA_OBJECT.
Uses explicit IS_BROADWELL / IS_CHERRYVIEW to distinguish in gen8 media
fill handling.
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
igt_kms docs are just skeleton and also added igt_fb to make sure the
linking works correctly.
Next up: Actually documenting igt_fb.
Also fix that depency spelling fumble I've copied around to a few too
many places.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
At least with the core library headers the situation is now fairly
sane. There's still fun stuff going on around *_reg.h and most of the
source files just have a cargo-culted list of headers ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Occasionally useful to read documentation ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Should help in alleviating the header mess we have atm.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Also fix a fumble in the documentation for intel_blt_copy. One thing
we might want to do is unify the parameter ordering here a bit ...
Again gtkdoc fails to pick up the documentation for struct igt_buf :(
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
