summaryrefslogtreecommitdiff
path: root/tests/gem_exec_nop.c
AgeCommit message (Collapse)Author
2015-11-13tests/gem_exec_nop: Improved test run timeDerek Morton
Reduced the Sleep period to 200mS and reduced the repetition count to 7 to decrease the test run time significantly. v2: Changed uS to us v3: removed the output formatting change as the issue will be addressed in a seperate patch from Thomas Wood. v4: mS -> ms Signed-off-by: Derek Morton <derek.j.morton@intel.com> Signed-off-by: Thomas Wood <thomas.wood@intel.com>
2015-09-11convert drm_open_any*() calls to drm_open_driver*(DRIVER_INTEL) calls with cocciMicah Fedke
Apply the new API to all call sites within the test suite using the following semantic patch: // Semantic patch for replacing drm_open_any* with arch-specific drm_open_driver* calls @@ identifier i =~ "\bdrm_open_any\b"; @@ - i() + drm_open_driver(DRIVER_INTEL) @@ identifier i =~ "\bdrm_open_any_master\b"; @@ - i() + drm_open_driver_master(DRIVER_INTEL) @@ identifier i =~ "\bdrm_open_any_render\b"; @@ - i() + drm_open_driver_render(DRIVER_INTEL) @@ identifier i =~ "\b__drm_open_any\b"; @@ - i() + __drm_open_driver(DRIVER_INTEL) Signed-off-by: Micah Fedke <micah.fedke@collabora.co.uk> Signed-off-by: Thomas Wood <thomas.wood@intel.com>
2015-08-21lib: add a single include headerThomas Wood
Add a header that includes all the headers for the library. This allows reorganisation of the library without affecting programs using it and also simplifies the headers that need to be included to use the library. Signed-off-by: Thomas Wood <thomas.wood@intel.com>
2015-07-01igt/gem_exec_nop: Control boost/idle frequenciesChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2015-07-01igt/gem_exec_nop: Wait between runsChris Wilson
In order to keep the GPU in a consistent state between samples, we have to wait for it to fall asleep before proceeding. For fun hook up igt_stats. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2015-03-26igt/gem_exec_(blt|nop): IGT magicChris Wilson
$ ./gem_exec_nop --list-subtests render bsd blt vebox gem_exec_nop: igt_core.c:946: igt_skip: Assertion `in_fixture' failed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2015-03-26igt/gem_exec_(nop|blt): Repeat measurements at min/max GPU frequenciesChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2015-03-26igt/gem_exec_nop: Repeat and average to stabilize measurementsChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2015-03-18igt/gem_exec_nop: Enlighten the failure error messageChris Wilson
References: https://bugs.freedesktop.org/show_bug.cgi?id=89633 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2015-03-06igt.cocci: Replace igt_assert() with igt_assert_CMP() where possibleMatt Roper
The integer comparison macros give us better error output by including the actual values that failed the comparison. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-05-14tests: sprinkle igt loggingDaniel Vetter
All the cases that simply dump some debug information and couldn't be converted to some of the fancier macros. Some information output removed when it's redundant with the subtest status. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-22lib: rename intel_gpu_tools.h to intel_io.hDaniel Vetter
With the header cleanup we can now give this header a suitable name, since it now really only contains register access and other I/O functions and assorted definitions. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-22lib: unnecessary header removal for drmtest.h, part 1Daniel Vetter
Brought a few missing headers to light in ioctl_wrappers.h, too. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-01lib: add igt_main macroDaniel Vetter
In the past new testcases with subtest often forgot to add the call to igt_exit at the end of their main() function. That is now caught with a bit more obnoxious asserts, but it's still a nuissance. This little igt_main macro takes care of that (and also of calling the subtest machinery initialization code correctly). If no one objects I'll roll this out for all the simple cases (i.e. those tests that don't have additional argv parsing on top of the subtest machinery). v2: Roll it out across the board. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25tests: use igt_assert/igt_require moreDaniel Vetter
With the new _f variants we can replace almost all of them. Also remove a ton of checks for argc != 1, they're a bit useless ... Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-03lib/drmtest: include sys/mman.h from drmtest.hDaniel Vetter
We need it for mmapping to get at PROT_READ|WRITE anyway. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14tests: roll out igt_fixtureDaniel Vetter
Also sprinkle igt_assert and igt_require over the setup code to clean up code while at it. To avoid gcc getting upset about unitialized variables just move them out of main as global data (where they always get initialized to 0) - gcc can't see through our igt_fixture and igt_subtest maze properly. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-13tests: introduce igt_requireDaniel Vetter
Since igt_skip has funny control flow we can abuse it and make it work like a special kind of assert which automatically skips tests if a requirement fails. Note that in places where we have a less strict test which should always succeed (e.g. ioctl works or isn't available) the igt_assert should be place before the igt_require with the more strict requirements. Otherwise we'll skip a test instead of properly failing it. Convert a few users of igt_skip over to igt_require to showcase its use. v2: s/gem_check_/gem_require_/ so that we consistently use "require" to indicate magic check that can call igt_skip. Imo hiding the igt_require for feature checks is ok, but for more traditional assert like use cases an explicit igt_require might be better. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-13tests: use igt_fail instead of exit(param != 0)Daniel Vetter
Mostly a sed job with too manual fixups: - one case of using _exit instead of exit - and one case which under some conditions use 77, so convert that check to an igt_skip. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-13tests: s/assert/igt_assertDaniel Vetter
Just a wholesale rollout for now, we can refine later on. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-12tests: s/return igt_retval();/igt_exit();/Daniel Vetter
Requested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-12s/drmtest_/igt_/Daniel Vetter
Requested-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-12s/drmtest_subtest_block/drmtest_subtest/Daniel Vetter
The _block postfix meant to convey that a C statement/block must follow can be misread as the verb to block. So drop it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-12tests: use drmtest_skip to check for ringsDaniel Vetter
To simplify things add a set of gem_check_<ring> functions which take care of this. Since I've opted for static inlines drmtest.h grew a few more header includes which was a neat opportunity to dump a few redundant #defines. This kills all the skipped_all hand-rolled logic we have. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-12lib/drmtest: Add drmtest_subtest_block macroDaniel Vetter
Doesn't do more than an if (drmtest_run_test(name)) right now, but as soon as we get a bit of infrastructure to handle test failures and skipping, this will get more interesting. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-18tests: Instrument tests run in simulation to run quicklyDamien Lespiau
We tweak the tests marked as runnable in simulation to run more quickly, more often then not at the expense of stress testing (which is of an arguable interest for the initial bring up in simulation). Hopefully the values chosen still test something, which is not always straightforward. It does run quickly, the number on an IVB machines are: $ time sudo IGT_SIMULATION=0 ./piglit-run.py tests/igt.tests foo [...] real 2m0.141s user 0m16.365s sys 1m33.382s Vs. $ time sudo IGT_SIMULATION=1 ./piglit-run.py tests/igt.tests foo [...] real 0m0.448s user 0m0.226s sys 0m0.183s Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
2013-04-27gem_exec_nop.c: add vebox test caseZhong Li
v2 (Ben): Fixed whitespace, s/HAS_BLT_RING/gem_has_vebox/ s/I915_EXEC_VEBOX/LOCAL_I915_EXEC_VEBOX Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-12-05tests/gem_exec_nop: implemented correct SKIP reportingDaniel Vetter
I think I need a testsuite for test writing.
2012-12-05tests: fixup gem_exec_nop subtestsDaniel Vetter
Note to self: No more pushing after 12 o'clock midnight. Not a good idea, too embarassing.
2012-12-04tests: run no-op batches on all ringsDaniel Vetter
For Ben ...
2012-06-14context: update for new execbuf2 elementBen Widawsky
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-01-10lib/drmtest: extract gem_createDaniel Vetter
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-10lib/drmtest: extract gem_set_domain and gem_syncDaniel Vetter
gem_sync just does a gtt sync by using set_domain(GTT, GTT). Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-10tests: fixup new warningsDaniel Vetter
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-10lib/drmtest: extract gem_writeDaniel Vetter
Astonishing how many different function signatures are possible for something that simple. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-10lib/drmtest: extract gem_closeDaniel Vetter
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14tests/gem_exec_nop: silence the compiler by failing on errorChris Wilson
gem_exec_nop.c: In function ‘exec’: gem_exec_nop.c:101:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Propagate the failure and exit(1).
2011-01-29Add a simple test to execute n nop batchesChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-26 16:39:31 +0000