Age | Commit message (Collapse) | Author |
|
We current have a single for_each_engine() iterator which we use to
generate both a set of uABI engines and a set of physical engines.
Determining what uABI ring-id corresponds to an actual HW engine is
tricky, so pull that out to a library function and introduce
for_each_physical_engine() for cases where we want to issue requests
once on each HW ring (avoiding aliasing issues).
v2: Remember can_store_dword for gem_sync
v3: Find more open-coded for_each_physical
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Fix the engine selection to exercise all possible rings and in doing so
completely obsoletes gem_multi_bsd_sync_loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
An oft-repeated function to check EXECBUFFER2 for a particular fail
condition.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
As we have the same function in a few places to read the
debugfs/i915_ring_missed_irq file, move it to the core.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
The test just aims to execute batches on alternating rings with a write
target such that every batch must be executed after the previous
completes. This stresses the inter-ring synchronisation, which is
interrupt driven if the gpu does not support semaphores, and so is a
good stress tests for detecting "missed interrupt syndrome". Make that
detection explicit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Apply the new API to all call sites within the test suite using the following
semantic patch:
// Semantic patch for replacing drm_open_any* with arch-specific drm_open_driver* calls
@@
identifier i =~ "\bdrm_open_any\b";
@@
- i()
+ drm_open_driver(DRIVER_INTEL)
@@
identifier i =~ "\bdrm_open_any_master\b";
@@
- i()
+ drm_open_driver_master(DRIVER_INTEL)
@@
identifier i =~ "\bdrm_open_any_render\b";
@@
- i()
+ drm_open_driver_render(DRIVER_INTEL)
@@
identifier i =~ "\b__drm_open_any\b";
@@
- i()
+ __drm_open_driver(DRIVER_INTEL)
Signed-off-by: Micah Fedke <micah.fedke@collabora.co.uk>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Add a header that includes all the headers for the library. This allows
reorganisation of the library without affecting programs using it and
also simplifies the headers that need to be included to use the library.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Add more test descriptions based on exiting comments.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Since relocations are variable size, depending upon generation, it is
easier to handle the resizing of the batch request inside the
BEGIN_BATCH macro. This still leaves us with having to resize commands
in a few places - which still need adaption for gen8+.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
With the header cleanup we can now give this header a suitable name,
since it now really only contains register access and other I/O
functions and assorted definitions.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Brought a few missing headers to light in ioctl_wrappers.h, too.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Also use igt_skip a bit more to simplify some of the tests.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
With the new _f variants we can replace almost all of them.
Also remove a ton of checks for argc != 1, they're a bit useless ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Mostly a sed job with too manual fixups:
- one case of using _exit instead of exit
- and one case which under some conditions use 77, so convert that
check to an igt_skip.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Just a wholesale rollout for now, we can refine later on.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We tweak the tests marked as runnable in simulation to run more quickly,
more often then not at the expense of stress testing (which is of an
arguable interest for the initial bring up in simulation). Hopefully the
values chosen still test something, which is not always straightforward.
It does run quickly, the number on an IVB machines are:
$ time sudo IGT_SIMULATION=0 ./piglit-run.py tests/igt.tests foo
[...]
real 2m0.141s
user 0m16.365s
sys 1m33.382s
Vs.
$ time sudo IGT_SIMULATION=1 ./piglit-run.py tests/igt.tests foo
[...]
real 0m0.448s
user 0m0.226s
sys 0m0.183s
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
1. add functions check kernel enable a ring or not.
2. add function gem_get_num_rings() to check how many rings kernel has
enable.
3. gem_ring_sync_loop.c will call gem_get_num_rings() directly instead
of original static fucntion get_number_rings().
Signed-off-by: Zhong Li <zhong.li@intel.com>
[Ben: Wrapped commit message + whitespace fixes]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63941
|
|
The code is surround by a #ifdef...#endif to avoid to break compiling against
the current libdrm release
v2 (Ben): Use VEBOX get param. Thankfully Daniel let us carve this out
way back when.
Spacing cleanups
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Using a dummy reloc that doesn't matter to trick the kernel into
synchroizing the rings.
v2: properly apply MI_NOOP workaround to MI_FLUSH_DW and
switch to MI_COND_BATCH_BUFFER_END as a dummy command on the
render ring to avoid PIPE_CONTROL errata.
v3: somebody clever decided that in C, you cound from 1,
i.e. I915_EXEC_RENDER == 1. It works now ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|