Age | Commit message (Collapse) | Author |
|
Apply the new API to all call sites within the test suite using the following
semantic patch:
// Semantic patch for replacing drm_open_any* with arch-specific drm_open_driver* calls
@@
identifier i =~ "\bdrm_open_any\b";
@@
- i()
+ drm_open_driver(DRIVER_INTEL)
@@
identifier i =~ "\bdrm_open_any_master\b";
@@
- i()
+ drm_open_driver_master(DRIVER_INTEL)
@@
identifier i =~ "\bdrm_open_any_render\b";
@@
- i()
+ drm_open_driver_render(DRIVER_INTEL)
@@
identifier i =~ "\b__drm_open_any\b";
@@
- i()
+ __drm_open_driver(DRIVER_INTEL)
Signed-off-by: Micah Fedke <micah.fedke@collabora.co.uk>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Add a header that includes all the headers for the library. This allows
reorganisation of the library without affecting programs using it and
also simplifies the headers that need to be included to use the library.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Add more test descriptions based on exiting comments.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Since relocations are variable size, depending upon generation, it is
easier to handle the resizing of the batch request inside the
BEGIN_BATCH macro. This still leaves us with having to resize commands
in a few places - which still need adaption for gen8+.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This reveal that quite a few locations were writing relocation offsets
but only allowing for 32 bit addresses. To reveal such places in active
tests, we also now double check that we do not use more batch space than
declared.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
All the cases that simply dump some debug information and couldn't be
converted to some of the fancier macros.
Some information output removed when it's redundant with the subtest
status.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
And shovel all the various helpers in there.
Also move igt_set_vt_graphics_mode to igt_kms.h since the function is
implemented in igt_kms.c. And it fits better. I kinda missed this in
the prep work.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
With the header cleanup we can now give this header a suitable name,
since it now really only contains register access and other I/O
functions and assorted definitions.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Brought a few missing headers to light in ioctl_wrappers.h, too.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This provides a macro that allows us to update all the arbitrary blit
commands we have stuck throughout the code. It assumes we don't actually
use 64b relocs (which is currently true). This also allows us to easily find
all the areas we need to update later when we really use the upper dword.
This block was done mostly with a sed job, and represents the easier
in test blit implementations.
v2 by Oscar: s/OUT_BATCH/BEGIN_BATCH in BLIT_COPY_BATCH_START
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
|
|
In the past new testcases with subtest often forgot to add the call to
igt_exit at the end of their main() function. That is now caught with
a bit more obnoxious asserts, but it's still a nuissance.
This little igt_main macro takes care of that (and also of calling the
subtest machinery initialization code correctly).
If no one objects I'll roll this out for all the simple cases (i.e.
those tests that don't have additional argv parsing on top of the
subtest machinery).
v2: Roll it out across the board.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
With the new _f variants we can replace almost all of them.
Also remove a ton of checks for argc != 1, they're a bit useless ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Also sprinkle igt_assert and igt_require over the setup code to clean
up code while at it. To avoid gcc getting upset about unitialized
variables just move them out of main as global data (where they always
get initialized to 0) - gcc can't see through our igt_fixture and
igt_subtest maze properly.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This is mostly important to get the SKIP reporting right, but I've
found a few stragglers that wanted to get converted over to the igt
result reporting completely.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Mostly a sed job with too manual fixups:
- one case of using _exit instead of exit
- and one case which under some conditions use 77, so convert that
check to an igt_skip.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Just a wholesale rollout for now, we can refine later on.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The _block postfix meant to convey that a C statement/block must
follow can be misread as the verb to block. So drop it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Doesn't do more than an if (drmtest_run_test(name)) right now, but
as soon as we get a bit of infrastructure to handle test failures and
skipping, this will get more interesting.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Let's start by a small set of tests, to eventually consider running
more.
The current list should then be:
gem_mmap
gem_pread_after_blit
gem_ring_sync_loop
gem_ctx_basic
gem_pipe_control_store_loop
gem_storedw_loop_render
gem_storedw_loop_blt
gem_storedw_loop_bsd
gem_render_linear_blits
gem_tiled_blits
gem_cpu_reloc
gem_exec_nop
gem_mmap_gtt
v2 add (Daniel Vetter)
gem_exec_bad_domains
gem_exec_faulting_reloc
gem_flink
gem_reg_read
gem_reloc_overflow
gem_tiling_max_stride
prime_*
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
|
|
|
|
... 8 pages is just not enough to somewhat reliably get one page that
needs bit17 swizzling.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Astonishing how dense I sometimes am ...
- increase the bo size so that we don't have any round-up to next tile
size areas (which the 2d blit go over, but the 1d pread/pwrite calls
will notice).
- correctly set tiling bits when copying back to a linear buffer.
- read back through a tiled bo to avoid messing with swizzling.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
And indeed, this blows up.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|