| Age | Commit message (Collapse) | Author |
|---|
|
Promote intel_os.c helpers to igt_os.c, so that I can re-use them for
some additional msm tests. Just big churny rename, no functional change.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
|
|
In error path in fixture add unlocking memory. In run_modes
there is already another subtest group which will guard against
igt_asserts or igt_requires, so do unpinning unconditionally
without fixture.
There are still some problems with the code, while we run swap
subtest we will race between other programs using memory so we
may still experience oom-kill during test. Second problem will be
on test machines configured with no swap turned on or with swap
size much smaller than RAM size.
The problem was discovered by Zbigniew with running
./gem_concurrent_blit --run '16M*' on machine with no swap.
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Kamil Konieczny <kamil.konieczny@linux.intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
|
|
Add noreloc mode for GPU gens without relocations. Also
while at this, add some caching for required properties.
Change also snoop function so it will work on DG1.
Tested with ./gem_concurrent_blit --run '4KiB-tiny-gpu-*'
and 256KiB with modified drm-tip to allow softpinning and
second run with relocs.
v9: restore empty newlines which where added/removed, use
CANONICAL for high bits of address in butchbuffer
v8: In main fixture, first try to open allocator should be done
with get_simple_h2l_ahnd so only on no-relocs gens we will
later use intel_allocator_open_full function (Zbigniew).
v7: rebase, cleanup bit17 caching (Zbigniew comments)
v6: correct comment, rewrite bit17 caching (Zbigniew)
v5: rebase, fix caching in bit17_require, changes according
to Zbigniew review: simplify cache of !gem_has_llc, drop
multiprocess start/stop, use ALLOC_STRATEGY_HIGH_TO_LOW,
correct offset and flags
v4: corrected alloc_open and first ahnd setting
Signed-off-by: Kamil Konieczny <kamil.konieczny@linux.intel.com>
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
|
|
Add a wrapper for gem_create_ext ioctl (a version of gem_create that
accepts extensions). In preparation for the driver change implementing it,
a local definition of its id and necessary structs have been added,
which are to be erased as soon as those definitions
appear in the i915_drm.h file.
The new ioctl wrapper is added to a separate file.
For consistency the wrapper of the old ioctl, gem_create
is moved from ioctl_wrappers to gem_create.
Signed-off-by: Andrzej Turko <andrzej.turko@linux.intel.com>
Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Chris P Wilson <chris.p.wilson@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Petri Latvala <petri.latvala@intel.com>
|
|
Having eliminated the use, also remember to remove the include
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
Let's not bother updating an unused hang subtest; there's adequate
coverage by hanging the other rings, one of which will be inactive
sometimes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
Improve the differentiation between the legacy ring selector ABI and the
more recent engine selection API.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
|
|
In order to find the correct aperture size for the test, we want to pass
the test's device into the query.
Reported-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
Ignore the rigmarole of the filters, by simply reopening the same
device.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
|
|
With upcoming of allocator code we need to ensure batch will execute
with appropriate context. If mismatch between allocator data and batch
could lead to strange or wrong results. All functions which could change
context in execbuf called from intel_bb were removed.
As an allocator requires size (which was not previously required in
intel_bb) adding object to intel_bb is now mandatory.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Use intel_bb / intel_buf to remove libdrm dependency.
Signed-off-by: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Local macros were declared in several files as a prelude to upstream
implementations. Now that we ship include/drm-uapi, we can remove LOCAL
as we upstream.
Cc: Dixit, Ashutosh <ashutosh.dixit@intel.com>
Cc: Tahvanainen Jari <jari.tahvanainen@intel.com>
Signed-off-by: ranjeet kumar <ranjeet1.kumar@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
igt_require_gem() is a pecularity of i915/, move it out of the core.
Similar opportunistic move of gem_reopen_driver() and
gem_quiescent_gpu().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
The test iterates over several mappings and BOs creation options, when
GTT mapping is not available skip those options.
Signed-off-by: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
UV FBs have two color surfaces so extend the igt_buf struct accordingly
to support blitting such FBs.
The patch is produced with the coccinelle patch below.
No functional changes.
@@
@@
struct igt_buf {
...
- uint32_t stride;
...
- uint32_t size;
+ struct {
+ uint32_t stride;
+ uint32_t size;
+ } surface[2];
...
};
@@
struct igt_buf b;
@@
<...
(
- b.stride
+ b.surface[0].stride
|
- b.size
+ b.surface[0].size
)
...>
@@
struct igt_buf *b;
@@
<...
(
- b->size
+ b->surface[0].size
|
- b->stride
+ b->surface[0].stride
)
...>
@@
identifier I;
expression E1;
expression E2;
@@
(
struct igt_buf I = {
- .size = E1,
- .stride = E2,
+ .surface[0] = {
+ .size = E1,
+ .stride = E2,
+ },
};
|
struct igt_buf I = {
- .size = E1,
+ .surface[0] = {
+ .size = E1,
+ },
};
|
struct igt_buf I = {
- .stride = E1,
+ .surface[0] = {
+ .stride = E1,
+ },
};
)
v2:
- Rebase on latest upstream. (Mika)
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Removing igt_skip_on_simulation() from all the gem tests
since this feature is not supported anymore.
v2: Rebase
v3: Corrected build failure, because of deletion of
gem_exec_blt.c
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
|
|
Provide the iterator name as an explicit macro parameter so that it is
known to the caller, and allows for them to properly nest loops over all
engines.
Fixes:
../tests/i915/gem_exec_schedule.c: In function ‘semaphore_noskip’:
../lib/igt_gt.h:84:44: warning: declaration of ‘e__’ shadows a previous local [-Wshadow]
for (const struct intel_execution_engine *e__ = intel_execution_engines;\
^~~
../tests/i915/gem_exec_schedule.c:653:2: note: in expansion of macro ‘for_each_physical_engine’
for_each_physical_engine(i915, other) {
^~~~~~~~~~~~~~~~~~~~~~~~
../lib/igt_gt.h:84:44: note: shadowed declaration is here
for (const struct intel_execution_engine *e__ = intel_execution_engines;\
^~~
../tests/i915/gem_exec_schedule.c:652:2: note: in expansion of macro ‘for_each_physical_engine’
for_each_physical_engine(i915, engine) {
^~~~~~~~~~~~~~~~~~~~~~~~
../tests/i915/gem_exec_schedule.c: In function ‘measure_semaphore_power’:
../lib/igt_gt.h:84:44: warning: declaration of ‘e__’ shadows a previous local [-Wshadow]
for (const struct intel_execution_engine *e__ = intel_execution_engines;\
^~~
../tests/i915/gem_exec_schedule.c:1740:3: note: in expansion of macro ‘for_each_physical_engine’
for_each_physical_engine(i915, engine) {
^~~~~~~~~~~~~~~~~~~~~~~~
../lib/igt_gt.h:84:44: note: shadowed declaration is here
for (const struct intel_execution_engine *e__ = intel_execution_engines;\
^~~
../tests/i915/gem_exec_schedule.c:1719:2: note: in expansion of macro ‘for_each_physical_engine’
for_each_physical_engine(i915, signaler) {
^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
|
|
If we try to idle while another thread is submitting, we will be forced
to wait until that other thread is finished -- effectively serialising
the parallel workloads, defeating said purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
|
|
Share the implementation to tweak the maximum number of open files.
The version in tests/i915/gem_exec_reuse.c was a little bit different,
but I don't think it needs to be because it would still return a
failure if any of the calls to setrlimit() fail. So I'm using the other
one.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
One significant usecase for intel_reg/etc. is to be able to examine
the hardware state *before* loading the driver. If the tool forces
the driver to load we've totally lost that capability.
This reverts commit 8ae86621d6fff60b6e20c6b0f9b336785c935b0f.
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
It allows us to make things a little bit more generic. Also, we now
require fd rather than doing guesswork when it comes to pci address.
v2: Use readlinkat rather than string concat, move stuff around, provide
a version that does not assert. (Chris)
v3: Print addr on failure, avoid assignment in conditionals. (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
We want to allow bpp = 8 or 16, so make sure we set the bpp
in igt_buf. This way we can extend rendercopy to support
other values for bpp.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Fix double ;; (Ville]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
We can already move all the tests with distinct prefixes: gem_, gen3_
and i915_.
pm_ and drv_ tests will follow in batches, so we can do the
adjustments in the reporting/filtering layer of the CI system.
v2: Fix test-list.txt generation with meson
v3: Fix docs build (Petri)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
Tested-by: Petri Latvala <petri.latvala@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
|
