| Age | Commit message (Collapse) | Author |
|---|
|
Add changes reflecting the new support for dynamic number of planes per pipe.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
This is better because some outputs may not be used on all pipes. This
correctly causes some tests to skip on CHV/VLV when there is no output
for a given pipe.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
To have a more accurate idea about any suspend/resume issues we can
perform the s/r until various phases in the s/r sequence. This way we
can isolate the given problem as being a device driver, kernel core or
BIOS related issue. Actual subtests using these new s/r phases will be
added as follow-up.
While at it also add the freeze suspend target, it's something we also
would need to test.
Signed-off-by: Imre Deak <imre.deak@intel.com>
|
|
They're duplicates with src_x/y, so just use those.
Changes since v1:
- Fix order of parameters in calls to igt_fb_set_position.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
|
|
This could happen when the selected pipe cannot be used with the connected
port due do HW constrains.
v2: Apply review comment (Marius)
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86763
Signed-off-by: Gabriel Feceoru <gabriel.feceoru@intel.com>
Signed-off-by: Marius Vlad <marius.c.vlad@intel.com>
|
|
When no display is connected all kms_plane subtests pass although
no testing is done.
Change it by reporting the subtests as skipped.
Signed-off-by: Gabriel Feceoru <gabriel.feceoru@intel.com>
Signed-off-by: Marius Vlad <marius.c.vlad@intel.com>
|
|
Apply the new API to all call sites within the test suite using the following
semantic patch:
// Semantic patch for replacing drm_open_any* with arch-specific drm_open_driver* calls
@@
identifier i =~ "\bdrm_open_any\b";
@@
- i()
+ drm_open_driver(DRIVER_INTEL)
@@
identifier i =~ "\bdrm_open_any_master\b";
@@
- i()
+ drm_open_driver_master(DRIVER_INTEL)
@@
identifier i =~ "\bdrm_open_any_render\b";
@@
- i()
+ drm_open_driver_render(DRIVER_INTEL)
@@
identifier i =~ "\b__drm_open_any\b";
@@
- i()
+ __drm_open_driver(DRIVER_INTEL)
Signed-off-by: Micah Fedke <micah.fedke@collabora.co.uk>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Add a header that includes all the headers for the library. This allows
reorganisation of the library without affecting programs using it and
also simplifies the headers that need to be included to use the library.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
Let's just steal the "crc" namespace and add this by default to
igt_pipe_crc_collect_crc() instead of adding more calls to other
tests. If tests want special waits on just some of their collect_crc()
calls, they can use another name instead of "crc".
This is very useful when developing, especially when the CRC we get is
wrong: we want to look at the screen to see what's going on before we
can think about how to fix the problem. So let's add this to the lib
instead of adding this to every single test I need to debug.
v2: Add some documentation (Daniel).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
|
|
Tests should positively check for crc matches, not for mismatches.
Enforce this by only exposing and igt_assert function for comparing
crcs.
For the few tests which didn't just do this as consistency checks but
to do functional tests add FIXME comments that some reference crc
values are missing.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Because of hash collisions tests should only ever compare crc
checksums for equality. Checking for inequality can result in random
failures.
To ensure this only expose and igt_assert function and use that.
Follow-up patches will rework the code for tests which don't follow
this requirement and try to compare for CRC inequality.
v2: Rebase on top of Matt's kms_plane changes.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
This converts the IGT API only, underneath legacy set_tiling is still used.
v2: One got away in kms_flip.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
i915 was using the main atomic 'disable plane' to turn off sprite planes
during a CRTC disable. This was problematic because it modified the
plane state, preventing us from recovering the original state later.
One such case was that during a DPMS OFF followed by a DPMS ON, any
sprite planes would not be restored properly.
Let's add a test that toggles DPMS off and on and ensures that the CRC
remains the same (i.e., planes are successfully restored unchanged).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
|
|
This adds a test that does a suspend/resume cycle between configuring
a plane and getting the crc value for the pipe. The intention is to
test if the user requested stated is restored properly, instead of
being clobbered by the state read out from the hardware.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
These tests require DRM master right, so make sure they have it from the
beginning. This gives an early indication if another DRM master is running
and makes the given test skip (with a proper explanation of the reason)
instead of exiting with error.
Signed-off-by: Imre Deak <imre.deak@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
So give it a kmstest_ prefix and shuffle it around a bit.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
And add api doc while at it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
New stuff caught.
Plus manually simplify the massive igt_fail_on_f(file == NULL, ...) to
a simple igt_assert(file). We already print the errno (if
applicapable) and the condition, which is equally informative.
Cc: Yi Sun <yi.sun@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
When changing the pipe we were using, test_grab_crc() wasn't correctly
setting the pipe constraint before waiting for the CRC on the pipe, and
so we ended up waiting for a CRC on a pipe that wasn't lit up.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Get CRCs of a full red and a full blue surface as reference.
Create a big framebuffer that is twice width and twice height as the
current display mode.
Fill the top left quarter with red, bottom right quarter with blue
Check the scanned out image with the CRTC at position (0, 0) of the
framebuffer and it should be the same CRC as the full red fb
Check the scanned out image with the CRTC at position (hdisplay,
vdisplay) and it should be the same CRC as the full blue fb
v2: Fix a few things here and there (Damien)
Cc: Lei Liu <lei.a.liu@intel.com>
Cc: Yi Sun <yi.sun@intel.com>
Signed-off-by: Lei Liu <lei.a.liu@intel.com>
Signed-off-by: Yi Sun <yi.sun@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
We're going to add tests for panning. Both position and panning tests
share the need to grab reference CRCs of single coloured fb, so let's
separate this function from the position test.
Cc: Lei Liu <lei.a.liu@intel.com>
Cc: Yi Sun <yi.sun@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
All the cases that simply dump some debug information and couldn't be
converted to some of the fancier macros.
Some information output removed when it's redundant with the subtest
status.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Shorter and more in line with our general igt_ prefix for everything
which isn't somehow intel or i915-gem or otherwise hw specific - these
helpers here are all fully generic framebuffer handling functions
based on kms + cairo.
Well, the actual buffer alloc is done with i915 gem, but meh ;-)
Two special cases:
- bpp_depth_to_drm_format and drm_format_to_bpp completely lacked
prefixes, so just add igt_.
- write_fb was a bit misleading given that we have gem_write for
uploading to buffers. Rename that to write_fb_to_png to make it
crystal clear what this thing does even without looking at docs.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Simplify the name since the old _fb function is now gone.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Use the new-style function using drm fourcc codes instead everywhere.
To easily use thew fourcc based interface also expose
bpp_depth_to_drm_format from the library. Finally include drm_fourcc.h
from the igt_kms.h header since pretty much everyone needs this now.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This time big with media_fill.h
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Functions which provide feature checks through igt_skip should be of
the form <prefix>_require_<feature>.
Otoh feature checks which return in a boolean whether the feature is
available should be of the form <prefix>_has_<feature>, e.g.
gem_has_blt.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
All tests have now lost explicit references to igt_debugfs_t!
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
It's nowhere used and removing it gives us a cleaner, more
orthogonal interface.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
We test the sprite plane positionning in there, for now.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
