/* * Copyright © 2015 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * * Authors: Paulo Zanoni * */ #include #include #include #include #include "drmtest.h" #include "igt_aux.h" #include "igt_draw.h" #include "igt_kms.h" #include "igt_debugfs.h" #include "intel_chipset.h" #include "ioctl_wrappers.h" IGT_TEST_DESCRIPTION("Test the Kernel's frontbuffer tracking mechanism and " "its related features: FBC and PSR"); /* * One of the aspects of this test is that, for every subtest, we try different * combinations of the parameters defined by the struct below. Because of this, * a single addition of a new parameter or subtest function can lead to hundreds * of new subtests. * * In order to reduce the number combinations we cut the cases that don't make * sense, such as writing on the secondary screen when there is only a single * pipe, or flipping when the target is the offscreen buffer. We also hide some * combinations that are somewhat redundant and don't add much value to the * test. For example, since we already do the offscreen testing with a single * pipe enabled, there's no much value in doing it again with dual pipes. If you * still want to try these redundant tests, you need to use the --show-hidden * option. * * The most important hidden thing is the FEATURE_NONE set of tests. Whenever * you get a failure on any test, it is important to check whether the same test * fails with FEATURE_NONE - replace the feature name for "nop". If the nop test * also fails, then it's likely the problem will be on the IGT side instead of * the Kernel side. We don't expose this set of tests by default because (i) * they take a long time to test; and (ii) if the feature tests work, then it's * very likely that the nop tests will also work. */ struct test_mode { /* Are we going to enable just one monitor, or are we going to setup a * dual screen environment for the test? */ enum { PIPE_SINGLE = 0, PIPE_DUAL, PIPE_COUNT, } pipes; /* The primary screen is the one that's supposed to have the "feature" * enabled on, but we have the option to draw on the secondary screen or * on some offscreen buffer. We also only theck the CRC of the primary * screen. */ enum { SCREEN_PRIM = 0, SCREEN_SCND, SCREEN_OFFSCREEN, SCREEN_COUNT, } screen; /* When we draw, we can draw directly on the primary plane, on the * cursor or on the sprite plane. */ enum { PLANE_PRI = 0, PLANE_CUR, PLANE_SPR, PLANE_COUNT, } plane; /* We can organize the screens in a way that each screen has its own * framebuffer, or in a way that all screens point to the same * framebuffer, but on different places. This includes the offscreen * screen. */ enum { FBS_SINGLE = 0, FBS_MULTI, FBS_COUNT } fbs; /* Which features are we going to test now? This is a mask! */ enum { FEATURE_NONE = 0, FEATURE_FBC = 1, FEATURE_PSR = 2, FEATURE_COUNT = 4, } feature; enum igt_draw_method method; }; enum feature_status { ENABLED, DISABLED, }; struct rect { int x; int y; int w; int h; uint32_t color; }; #define MAX_CONNECTORS 32 struct { int fd; drmModeResPtr res; drmModeConnectorPtr connectors[MAX_CONNECTORS]; drmModePlaneResPtr planes; drm_intel_bufmgr *bufmgr; } drm; struct { int fd; bool can_test; bool supports_compressing; bool supports_last_action; struct timespec last_action; } fbc = { .fd = -1, .can_test = false, .supports_last_action = false, .supports_compressing = false, }; struct { int fd; bool can_test; } psr = { .fd = -1, .can_test = false, }; #define SINK_CRC_SIZE 12 typedef struct { char data[SINK_CRC_SIZE]; } sink_crc_t; struct both_crcs { igt_crc_t pipe; sink_crc_t sink; }; igt_pipe_crc_t *pipe_crc; struct both_crcs blue_crc; struct both_crcs *wanted_crc; struct { int fd; bool supported; } sink_crc = { .fd = -1, .supported = false, }; /* The goal of this structure is to easily allow us to deal with cases where we * have a big framebuffer and the CRTC is just displaying a subregion of this * big FB. */ struct fb_region { struct igt_fb *fb; int x; int y; int w; int h; }; struct draw_pattern_info { bool initialized; bool frames_stack; int n_rects; struct both_crcs *crcs; struct rect (*get_rect)(struct fb_region *fb, int r); }; /* Draw big rectangles on the screen. */ struct draw_pattern_info pattern1; /* 64x64 rectangles at x:0,y:0, just so we can draw on the cursor and sprite. */ struct draw_pattern_info pattern2; /* 64x64 rectangles at different positions, same color, for the move test. */ struct draw_pattern_info pattern3; /* Just a fullscreen green square. */ struct draw_pattern_info pattern4; /* Command line parameters. */ struct { bool check_status; bool check_crc; bool fbc_check_compression; bool fbc_check_last_action; bool no_edp; bool small_modes; bool show_hidden; int step; int only_feature; int only_pipes; } opt = { .check_status = true, .check_crc = true, .fbc_check_compression = true, .fbc_check_last_action = true, .no_edp = false, .small_modes = false, .show_hidden= false, .step = 0, .only_feature = FEATURE_COUNT, .only_pipes = PIPE_COUNT, }; struct modeset_params { uint32_t crtc_id; uint32_t connector_id; uint32_t sprite_id; drmModeModeInfoPtr mode; struct fb_region fb; struct fb_region cursor; struct fb_region sprite; }; struct modeset_params prim_mode_params; struct modeset_params scnd_mode_params; struct fb_region offscreen_fb; struct { struct igt_fb prim_pri; struct igt_fb prim_cur; struct igt_fb prim_spr; struct igt_fb scnd_pri; struct igt_fb scnd_cur; struct igt_fb scnd_spr; struct igt_fb offscreen; struct igt_fb big; } fbs; struct { pthread_t thread; bool stop; uint32_t handle; uint32_t size; uint32_t stride; int width; int height; } busy_thread = { .stop = true, }; static drmModeModeInfoPtr get_connector_smallest_mode(drmModeConnectorPtr c) { int i; drmModeModeInfoPtr smallest = NULL; for (i = 0; i < c->count_modes; i++) { drmModeModeInfoPtr mode = &c->modes[i]; if (!smallest) smallest = mode; if (mode->hdisplay * mode->vdisplay < smallest->hdisplay * smallest->vdisplay) smallest = mode; } return smallest; } static drmModeConnectorPtr get_connector(uint32_t id) { int i; for (i = 0; i < drm.res->count_connectors; i++) if (drm.res->connectors[i] == id) return drm.connectors[i]; igt_assert(false); } static void print_mode_info(const char *screen, struct modeset_params *params) { drmModeConnectorPtr c = get_connector(params->connector_id); igt_info("%s screen: %s %s\n", screen, kmstest_connector_type_str(c->connector_type), params->mode->name); } static void init_mode_params(struct modeset_params *params, uint32_t crtc_id, int crtc_index, uint32_t connector_id, drmModeModeInfoPtr mode) { uint32_t plane_id = 0; int i; for (i = 0; i < drm.planes->count_planes && plane_id == 0; i++) { drmModePlanePtr plane; plane = drmModeGetPlane(drm.fd, drm.planes->planes[i]); igt_assert(plane); if (plane->possible_crtcs & (1 << crtc_index)) plane_id = plane->plane_id; drmModeFreePlane(plane); } igt_assert(plane_id); params->crtc_id = crtc_id; params->connector_id = connector_id; params->mode = mode; params->sprite_id = plane_id; params->fb.fb = NULL; params->fb.w = mode->hdisplay; params->fb.h = mode->vdisplay; params->cursor.fb = NULL; params->cursor.x = 0; params->cursor.y = 0; params->cursor.w = 64; params->cursor.h = 64; params->sprite.fb = NULL; params->sprite.x = 0; params->sprite.y = 0; params->sprite.w = 64; params->sprite.h = 64; } drmModeModeInfo std_1024_mode = { .clock = 65000, .hdisplay = 1024, .hsync_start = 1048, .hsync_end = 1184, .htotal = 1344, .vtotal = 806, .hskew = 0, .vdisplay = 768, .vsync_start = 771, .vsync_end = 777, .vtotal = 806, .vscan = 0, .vrefresh = 60, .flags = 0xA, .type = 0x40, .name = "Custom 1024x768", }; static bool connector_get_mode(drmModeConnectorPtr c, drmModeModeInfoPtr *mode) { *mode = NULL; if (c->connection != DRM_MODE_CONNECTED || !c->count_modes) return false; if (c->connector_type == DRM_MODE_CONNECTOR_eDP && opt.no_edp) return false; if (opt.small_modes) *mode = get_connector_smallest_mode(c); else *mode = &c->modes[0]; /* Because on some machines we don't have enough stolen memory to fit in * those 3k panels. And on HSW the CRC WA is so awful that it makes you * think everything is bugged. */ if (c->connector_type == DRM_MODE_CONNECTOR_eDP) *mode = &std_1024_mode; return true; } static bool init_modeset_cached_params(void) { int i; uint32_t prim_connector_id = 0, scnd_connector_id = 0; drmModeModeInfoPtr prim_mode = NULL, scnd_mode = NULL; drmModeModeInfoPtr tmp_mode; /* First, try to find an eDP monitor since it's the only possible type * for PSR. */ for (i = 0; i < drm.res->count_connectors; i++) { if (drm.connectors[i]->connector_type != DRM_MODE_CONNECTOR_eDP) continue; if (connector_get_mode(drm.connectors[i], &tmp_mode)) { prim_connector_id = drm.res->connectors[i]; prim_mode = tmp_mode; } } for (i = 0; i < drm.res->count_connectors; i++) { /* Don't pick again what we just selected on the above loop. */ if (drm.res->connectors[i] == prim_connector_id) continue; if (connector_get_mode(drm.connectors[i], &tmp_mode)) { if (!prim_connector_id) { prim_connector_id = drm.res->connectors[i]; prim_mode = tmp_mode; } else if (!scnd_connector_id) { scnd_connector_id = drm.res->connectors[i]; scnd_mode = tmp_mode; break; } } } if (!prim_connector_id) return false; init_mode_params(&prim_mode_params, drm.res->crtcs[0], 0, prim_connector_id, prim_mode); print_mode_info("Primary", &prim_mode_params); if (!scnd_connector_id) { scnd_mode_params.connector_id = 0; return true; } igt_assert(drm.res->count_crtcs >= 2); init_mode_params(&scnd_mode_params, drm.res->crtcs[1], 1, scnd_connector_id, scnd_mode); print_mode_info("Secondary", &scnd_mode_params); return true; } /* * This is how the prim, scnd and offscreens FB should be positioned inside the * big FB. The prim buffer starts at a 500x500 offset, then scnd starts at the * same 500 pixel Y offset, right after prim ends on the X axis, then the * offscreen fb starts after scnd ends. * +------------------------------------+ * | big | * | +--------+-----------+-----------+ * | | prim | scnd | offscreen | * | | | | | * | | +-----------+ | * | | | +-----------+ * +---+--------+-----------------------+ */ static void create_big_fb(void) { int prim_w, prim_h, scnd_w, scnd_h, offs_w, offs_h, big_w, big_h; prim_w = prim_mode_params.mode->hdisplay; prim_h = prim_mode_params.mode->vdisplay; if (scnd_mode_params.connector_id) { scnd_w = scnd_mode_params.mode->hdisplay; scnd_h = scnd_mode_params.mode->vdisplay; } else { scnd_w = 0; scnd_h = 0; } offs_w = offscreen_fb.w; offs_h = offscreen_fb.h; big_w = prim_w + scnd_w + offs_w + 500; big_h = prim_h; if (scnd_h > big_h) big_h = scnd_h; if (offs_h > big_h) big_h = offs_h; big_h += 500; igt_create_fb(drm.fd, big_w, big_h, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fbs.big); } static void create_fbs(void) { igt_create_fb(drm.fd, prim_mode_params.mode->hdisplay, prim_mode_params.mode->vdisplay, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fbs.prim_pri); igt_create_fb(drm.fd, prim_mode_params.cursor.w, prim_mode_params.cursor.h, DRM_FORMAT_ARGB8888, LOCAL_DRM_FORMAT_MOD_NONE, &fbs.prim_cur); igt_create_fb(drm.fd, prim_mode_params.sprite.w, prim_mode_params.sprite.h, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fbs.prim_spr); igt_create_fb(drm.fd, offscreen_fb.w, offscreen_fb.h, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fbs.offscreen); create_big_fb(); if (!scnd_mode_params.connector_id) return; igt_create_fb(drm.fd, scnd_mode_params.mode->hdisplay, scnd_mode_params.mode->vdisplay, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fbs.scnd_pri); igt_create_fb(drm.fd, scnd_mode_params.cursor.w, scnd_mode_params.cursor.h, DRM_FORMAT_ARGB8888, LOCAL_DRM_FORMAT_MOD_NONE, &fbs.scnd_cur); igt_create_fb(drm.fd, scnd_mode_params.sprite.w, scnd_mode_params.sprite.h, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fbs.scnd_spr); } static bool set_mode_for_params(struct modeset_params *params) { int rc; rc = drmModeSetCrtc(drm.fd, params->crtc_id, params->fb.fb->fb_id, params->fb.x, params->fb.y, ¶ms->connector_id, 1, params->mode); return (rc == 0); } #define DEBUGFS_MSG_SIZE 256 static void get_debugfs_string(int fd, char *buf) { ssize_t n_read; lseek(fd, 0, SEEK_SET); n_read = read(fd, buf, DEBUGFS_MSG_SIZE -1); igt_assert(n_read >= 0); buf[n_read] = '\0'; } static enum feature_status fbc_get_status(void) { char buf[DEBUGFS_MSG_SIZE]; get_debugfs_string(fbc.fd, buf); if (strstr(buf, "FBC enabled\n")) return ENABLED; else return DISABLED; } static enum feature_status psr_get_status(void) { char buf[DEBUGFS_MSG_SIZE]; get_debugfs_string(psr.fd, buf); if (strstr(buf, "\nActive: yes\n")) return ENABLED; else return DISABLED; } static struct timespec fbc_get_last_action(void) { struct timespec ret = { 0, 0 }; char buf[DEBUGFS_MSG_SIZE]; char *action; ssize_t n_read; get_debugfs_string(fbc.fd, buf); action = strstr(buf, "\nLast action:"); igt_assert(action); n_read = sscanf(action, "Last action: %ld.%ld", &ret.tv_sec, &ret.tv_nsec); igt_assert(n_read == 2); return ret; } static bool fbc_last_action_changed(void) { struct timespec t_new, t_old; t_old = fbc.last_action; t_new = fbc_get_last_action(); fbc.last_action = t_new; #if 0 igt_info("old: %ld.%ld\n", t_old.tv_sec, t_old.tv_nsec); igt_info("new: %ld.%ld\n", t_new.tv_sec, t_new.tv_nsec); #endif return t_old.tv_sec != t_new.tv_sec || t_old.tv_nsec != t_new.tv_nsec; } static void fbc_update_last_action(void) { if (!fbc.supports_last_action) return; fbc.last_action = fbc_get_last_action(); #if 0 igt_info("Last action: %ld.%ld\n", fbc.last_action.tv_sec, fbc.last_action.tv_nsec); #endif } static void fbc_setup_last_action(void) { ssize_t n_read; char buf[DEBUGFS_MSG_SIZE]; char *action; get_debugfs_string(fbc.fd, buf); action = strstr(buf, "\nLast action:"); if (!action) { igt_info("FBC last action not supported\n"); return; } fbc.supports_last_action = true; n_read = sscanf(action, "Last action: %ld.%ld", &fbc.last_action.tv_sec, &fbc.last_action.tv_nsec); igt_assert(n_read == 2); } static bool fbc_is_compressing(void) { char buf[DEBUGFS_MSG_SIZE]; get_debugfs_string(fbc.fd, buf); return strstr(buf, "\nCompressing: yes\n") != NULL; } static bool fbc_wait_for_compression(void) { return igt_wait(fbc_is_compressing(), 5000, 1); } static void fbc_setup_compressing(void) { char buf[DEBUGFS_MSG_SIZE]; get_debugfs_string(fbc.fd, buf); if (strstr(buf, "\nCompressing:")) fbc.supports_compressing = true; else igt_info("FBC compression information not supported\n"); } static bool fbc_wait_for_status(enum feature_status status) { return igt_wait(fbc_get_status() == status, 5000, 1); } static bool psr_wait_for_status(enum feature_status status) { return igt_wait(psr_get_status() == status, 5000, 1); } #define fbc_enable() igt_set_module_param_int("enable_fbc", 1) #define fbc_disable() igt_set_module_param_int("enable_fbc", 0) #define psr_enable() igt_set_module_param_int("enable_psr", 1) #define psr_disable() igt_set_module_param_int("enable_psr", 0) static void get_sink_crc(sink_crc_t *crc) { lseek(sink_crc.fd, 0, SEEK_SET); igt_assert(read(sink_crc.fd, crc->data, SINK_CRC_SIZE) == SINK_CRC_SIZE); } static bool sink_crc_equal(sink_crc_t *a, sink_crc_t *b) { return (memcmp(a->data, b->data, SINK_CRC_SIZE) == 0); } #define assert_sink_crc_equal(a, b) igt_assert(sink_crc_equal(a, b)) static struct rect pat1_get_rect(struct fb_region *fb, int r) { struct rect rect; switch (r) { case 0: rect.x = 0; rect.y = 0; rect.w = fb->w / 8; rect.h = fb->h / 8; rect.color = 0x00FF00; break; case 1: rect.x = fb->w / 8 * 4; rect.y = fb->h / 8 * 4; rect.w = fb->w / 8 * 2; rect.h = fb->h / 8 * 2; rect.color = 0xFF0000; break; case 2: rect.x = fb->w / 16 + 1; rect.y = fb->h / 16 + 1; rect.w = fb->w / 8 + 1; rect.h = fb->h / 8 + 1; rect.color = 0xFF00FF; break; case 3: rect.x = fb->w - 64; rect.y = fb->h - 64; rect.w = 64; rect.h = 64; rect.color = 0x00FFFF; break; default: igt_assert(false); } return rect; } static struct rect pat2_get_rect(struct fb_region *fb, int r) { struct rect rect; rect.x = 0; rect.y = 0; rect.w = 64; rect.h = 64; switch (r) { case 0: rect.color = 0xFF00FF00; break; case 1: rect.x = 31; rect.y = 31; rect.w = 31; rect.h = 31; rect.color = 0xFFFF0000; break; case 2: rect.x = 16; rect.y = 16; rect.w = 32; rect.h = 32; rect.color = 0xFFFF00FF; break; case 3: rect.color = 0xFF00FFFF; break; default: igt_assert(false); } return rect; } static struct rect pat3_get_rect(struct fb_region *fb, int r) { struct rect rect; rect.w = 64; rect.h = 64; rect.color = 0xFF00FF00; switch (r) { case 0: rect.x = 0; rect.y = 0; break; case 1: rect.x = 64; rect.y = 64; break; case 2: rect.x = 1; rect.y = 1; break; case 3: rect.x = fb->w - 64; rect.y = fb->h - 64; break; case 4: rect.x = fb->w / 2 - 32; rect.y = fb->h / 2 - 32; break; default: igt_assert(false); } return rect; } static struct rect pat4_get_rect(struct fb_region *fb, int r) { struct rect rect; igt_assert(r == 0); rect.x = 0; rect.y = 0; rect.w = fb->w; rect.h = fb->h; rect.color = 0xFF00FF00; return rect; } static void draw_rect(struct draw_pattern_info *pattern, struct fb_region *fb, enum igt_draw_method method, int r) { struct rect rect = pattern->get_rect(fb, r); igt_draw_rect_fb(drm.fd, drm.bufmgr, NULL, fb->fb, method, fb->x + rect.x, fb->y + rect.y, rect.w, rect.h, rect.color); } static void draw_rect_igt_fb(struct draw_pattern_info *pattern, struct igt_fb *fb, enum igt_draw_method method, int r) { struct fb_region region = { .fb = fb, .x = 0, .y = 0, .w = fb->width, .h = fb->height, }; draw_rect(pattern, ®ion, method, r); } static void fill_fb_region(struct fb_region *region, uint32_t color) { igt_draw_rect_fb(drm.fd, NULL, NULL, region->fb, IGT_DRAW_MMAP_CPU, region->x, region->y, region->w, region->h, color); } static void unset_all_crtcs(void) { int i, rc; for (i = 0; i < drm.res->count_crtcs; i++) { rc = drmModeSetCrtc(drm.fd, drm.res->crtcs[i], -1, 0, 0, NULL, 0, NULL); igt_assert(rc == 0); rc = drmModeSetCursor(drm.fd, drm.res->crtcs[i], 0, 0, 0); igt_assert(rc == 0); } for (i = 0; i < drm.planes->count_planes; i++) { rc = drmModeSetPlane(drm.fd, drm.planes->planes[i], 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); igt_assert(rc == 0); } } static void disable_features(void) { fbc_disable(); psr_disable(); } static void *busy_thread_func(void *data) { while (!busy_thread.stop) igt_draw_rect(drm.fd, drm.bufmgr, NULL, busy_thread.handle, busy_thread.size, busy_thread.stride, IGT_DRAW_BLT, 0, 0, busy_thread.width, busy_thread.height, 0xFF); pthread_exit(0); } static void start_busy_thread(struct igt_fb *fb) { int rc; igt_assert(busy_thread.stop == true); busy_thread.stop = false; busy_thread.handle = fb->gem_handle; busy_thread.size = fb->size; busy_thread.stride = fb->stride; busy_thread.width = fb->width; busy_thread.height = fb->height; rc = pthread_create(&busy_thread.thread, NULL, busy_thread_func, NULL); igt_assert(rc == 0); } static void stop_busy_thread(void) { if (!busy_thread.stop) { busy_thread.stop = true; igt_assert(pthread_join(busy_thread.thread, NULL) == 0); } } static void print_crc(const char *str, struct both_crcs *crc) { int i; char *pipe_str; pipe_str = igt_crc_to_string(&crc->pipe); igt_debug("%s pipe:[%s] sink:[", str, pipe_str); for (i = 0; i < SINK_CRC_SIZE; i++) igt_debug("%c", crc->sink.data[i]); igt_debug("]\n"); free(pipe_str); } static void collect_crcs(struct both_crcs *crcs) { igt_pipe_crc_collect_crc(pipe_crc, &crcs->pipe); if (sink_crc.supported) get_sink_crc(&crcs->sink); else memcpy(&crcs->sink, "unsupported!", SINK_CRC_SIZE); } static void init_blue_crc(void) { struct igt_fb blue; int rc; disable_features(); unset_all_crtcs(); igt_create_fb(drm.fd, prim_mode_params.mode->hdisplay, prim_mode_params.mode->vdisplay, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &blue); igt_draw_fill_fb(drm.fd, &blue, 0xFF); rc = drmModeSetCrtc(drm.fd, prim_mode_params.crtc_id, blue.fb_id, 0, 0, &prim_mode_params.connector_id, 1, prim_mode_params.mode); igt_assert(rc == 0); collect_crcs(&blue_crc); print_crc("Blue CRC: ", &blue_crc); igt_remove_fb(drm.fd, &blue); } static void init_crcs(struct draw_pattern_info *pattern) { int r, r_, rc; struct igt_fb tmp_fbs[pattern->n_rects]; if (pattern->initialized) return; pattern->crcs = calloc(pattern->n_rects, sizeof(*(pattern->crcs))); for (r = 0; r < pattern->n_rects; r++) igt_create_fb(drm.fd, prim_mode_params.mode->hdisplay, prim_mode_params.mode->vdisplay, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &tmp_fbs[r]); for (r = 0; r < pattern->n_rects; r++) igt_draw_fill_fb(drm.fd, &tmp_fbs[r], 0xFF); if (pattern->frames_stack) { for (r = 0; r < pattern->n_rects; r++) for (r_ = 0; r_ <= r; r_++) draw_rect_igt_fb(pattern, &tmp_fbs[r], IGT_DRAW_PWRITE, r_); } else { for (r = 0; r < pattern->n_rects; r++) draw_rect_igt_fb(pattern, &tmp_fbs[r], IGT_DRAW_PWRITE, r); } for (r = 0; r < pattern->n_rects; r++) { rc = drmModeSetCrtc(drm.fd, prim_mode_params.crtc_id, tmp_fbs[r].fb_id, 0, 0, &prim_mode_params.connector_id, 1, prim_mode_params.mode); igt_assert(rc == 0); collect_crcs(&pattern->crcs[r]); } for (r = 0; r < pattern->n_rects; r++) { igt_debug("Rect %d CRC:", r); print_crc("", &pattern->crcs[r]); } unset_all_crtcs(); for (r = 0; r < pattern->n_rects; r++) igt_remove_fb(drm.fd, &tmp_fbs[r]); pattern->initialized = true; } static void setup_drm(void) { int i; drm.fd = drm_open_any_master(); drm.res = drmModeGetResources(drm.fd); igt_assert(drm.res->count_connectors <= MAX_CONNECTORS); for (i = 0; i < drm.res->count_connectors; i++) drm.connectors[i] = drmModeGetConnector(drm.fd, drm.res->connectors[i]); drm.planes = drmModeGetPlaneResources(drm.fd); drm.bufmgr = drm_intel_bufmgr_gem_init(drm.fd, 4096); igt_assert(drm.bufmgr); drm_intel_bufmgr_gem_enable_reuse(drm.bufmgr); } static void teardown_drm(void) { int i; drm_intel_bufmgr_destroy(drm.bufmgr); drmModeFreePlaneResources(drm.planes); for (i = 0; i < drm.res->count_connectors; i++) drmModeFreeConnector(drm.connectors[i]); drmModeFreeResources(drm.res); close(drm.fd); } static void setup_modeset(void) { igt_require(init_modeset_cached_params()); offscreen_fb.fb = NULL; offscreen_fb.w = 1024; offscreen_fb.h = 1024; create_fbs(); kmstest_set_vt_graphics_mode(); } static void teardown_modeset(void) { if (scnd_mode_params.connector_id) { igt_remove_fb(drm.fd, &fbs.scnd_pri); igt_remove_fb(drm.fd, &fbs.scnd_cur); igt_remove_fb(drm.fd, &fbs.scnd_spr); } igt_remove_fb(drm.fd, &fbs.prim_pri); igt_remove_fb(drm.fd, &fbs.prim_cur); igt_remove_fb(drm.fd, &fbs.prim_spr); igt_remove_fb(drm.fd, &fbs.offscreen); igt_remove_fb(drm.fd, &fbs.big); } static void setup_sink_crc(void) { ssize_t rc; sink_crc_t crc; int errno_; drmModeConnectorPtr c; c = get_connector(prim_mode_params.connector_id); if (c->connector_type != DRM_MODE_CONNECTOR_eDP) { igt_info("Sink CRC not supported: primary screen is not eDP\n"); return; } /* We need to make sure there's a mode set on the eDP screen and it's * not on DPMS state, otherwise we fall into the "Unexpected sink CRC * error" case. */ prim_mode_params.fb.fb = &fbs.prim_pri; prim_mode_params.fb.x = prim_mode_params.fb.y = 0; fill_fb_region(&prim_mode_params.fb, 0xFF); unset_all_crtcs(); set_mode_for_params(&prim_mode_params); sink_crc.fd = igt_debugfs_open("i915_sink_crc_eDP1", O_RDONLY); igt_assert(sink_crc.fd >= 0); rc = read(sink_crc.fd, crc.data, SINK_CRC_SIZE); errno_ = errno; if (rc == -1 && errno_ == ENOTTY) igt_info("Sink CRC not supported: panel doesn't support it\n"); else if (rc == SINK_CRC_SIZE) sink_crc.supported = true; else igt_info("Unexpected sink CRC error, rc=:%ld errno:%d %s\n", rc, errno_, strerror(errno_)); } static void setup_crcs(void) { pipe_crc = igt_pipe_crc_new(0, INTEL_PIPE_CRC_SOURCE_AUTO); setup_sink_crc(); init_blue_crc(); pattern1.initialized = false; pattern1.frames_stack = true; pattern1.n_rects = 4; pattern1.crcs = NULL; pattern1.get_rect = pat1_get_rect; pattern2.initialized = false; pattern2.frames_stack = true; pattern2.n_rects = 4; pattern2.crcs = NULL; pattern2.get_rect = pat2_get_rect; pattern3.initialized = false; pattern3.frames_stack = false; pattern3.n_rects = 5; pattern3.crcs = NULL; pattern3.get_rect = pat3_get_rect; pattern4.initialized = false; pattern4.frames_stack = false; pattern4.n_rects = 1; pattern4.crcs = NULL; pattern4.get_rect = pat4_get_rect; } static void teardown_crcs(void) { if (pattern1.crcs) free(pattern1.crcs); if (pattern2.crcs) free(pattern2.crcs); if (pattern3.crcs) free(pattern3.crcs); if (pattern4.crcs) free(pattern4.crcs); if (sink_crc.fd != -1) close(sink_crc.fd); igt_pipe_crc_free(pipe_crc); } static bool fbc_supported_on_chipset(void) { char buf[DEBUGFS_MSG_SIZE]; get_debugfs_string(fbc.fd, buf); return !strstr(buf, "FBC unsupported on this chipset\n"); } static void setup_fbc(void) { fbc.fd = igt_debugfs_open("i915_fbc_status", O_RDONLY); igt_assert(fbc.fd >= 0); if (!fbc_supported_on_chipset()) { igt_info("Can't test FBC: not supported on this chipset\n"); return; } fbc.can_test = true; fbc_setup_last_action(); fbc_setup_compressing(); } static void teardown_fbc(void) { if (fbc.fd != -1) close(fbc.fd); } static bool psr_sink_has_support(void) { char buf[DEBUGFS_MSG_SIZE]; get_debugfs_string(psr.fd, buf); return strstr(buf, "Sink_Support: yes\n"); } static void setup_psr(void) { if (get_connector(prim_mode_params.connector_id)->connector_type != DRM_MODE_CONNECTOR_eDP) { igt_info("Can't test PSR: no usable eDP screen.\n"); return; } psr.fd = igt_debugfs_open("i915_edp_psr_status", O_RDONLY); igt_assert(psr.fd >= 0); if (!psr_sink_has_support()) { igt_info("Can't test PSR: not supported by sink.\n"); return; } psr.can_test = true; } static void teardown_psr(void) { if (psr.fd != -1) close(psr.fd); } static void setup_environment(void) { setup_drm(); setup_modeset(); setup_fbc(); setup_psr(); setup_crcs(); } static void teardown_environment(void) { stop_busy_thread(); teardown_crcs(); teardown_psr(); teardown_fbc(); teardown_modeset(); teardown_drm(); } static void wait_user(int step, const char *msg) { if (opt.step < step) return; igt_info("%s Press enter...\n", msg); while (getchar() != '\n') ; } static struct modeset_params *pick_params(const struct test_mode *t) { switch (t->screen) { case SCREEN_PRIM: return &prim_mode_params; case SCREEN_SCND: return &scnd_mode_params; case SCREEN_OFFSCREEN: return NULL; default: igt_assert(false); } } static struct fb_region *pick_target(const struct test_mode *t, struct modeset_params *params) { if (!params) return &offscreen_fb; switch (t->plane) { case PLANE_PRI: return ¶ms->fb; case PLANE_CUR: return ¶ms->cursor; case PLANE_SPR: return ¶ms->sprite; default: igt_assert(false); } } static void do_flush(const struct test_mode *t) { struct modeset_params *params = pick_params(t); struct fb_region *target = pick_target(t, params); gem_set_domain(drm.fd, target->fb->gem_handle, I915_GEM_DOMAIN_GTT, 0); } #define DONT_ASSERT_CRC (1 << 0) #define FBC_ASSERT_FLAGS (0xF << 1) #define ASSERT_FBC_ENABLED (1 << 1) #define ASSERT_FBC_DISABLED (1 << 2) #define ASSERT_LAST_ACTION_CHANGED (1 << 3) #define ASSERT_NO_ACTION_CHANGE (1 << 4) #define PSR_ASSERT_FLAGS (3 << 5) #define ASSERT_PSR_ENABLED (1 << 5) #define ASSERT_PSR_DISABLED (1 << 6) static int adjust_assertion_flags(const struct test_mode *t, int flags) { if (!(flags & ASSERT_FBC_DISABLED)) flags |= ASSERT_FBC_ENABLED; if (!(flags & ASSERT_PSR_DISABLED)) flags |= ASSERT_PSR_ENABLED; if ((t->feature & FEATURE_FBC) == 0) flags &= ~FBC_ASSERT_FLAGS; if ((t->feature & FEATURE_PSR) == 0) flags &= ~PSR_ASSERT_FLAGS; return flags; } #define do_crc_assertions(flags) do { \ int flags__ = (flags); \ struct both_crcs crc_; \ \ if (!opt.check_crc || (flags__ & DONT_ASSERT_CRC)) \ break; \ \ collect_crcs(&crc_); \ print_crc("Calculated CRC:", &crc_); \ \ igt_assert(wanted_crc); \ igt_assert_crc_equal(&crc_.pipe, &wanted_crc->pipe); \ assert_sink_crc_equal(&crc_.sink, &wanted_crc->sink); \ } while (0) #define do_assertions(flags) do { \ int flags_ = adjust_assertion_flags(t, (flags)); \ \ wait_user(2, "Paused before assertions."); \ \ /* Check the CRC to make sure the drawing operations work \ * immediately, independently of the features being enabled. */ \ do_crc_assertions(flags_); \ \ /* Now we can flush things to make the test faster. */ \ do_flush(t); \ \ if (opt.check_status) { \ if (flags_ & ASSERT_FBC_ENABLED) { \ igt_assert(fbc_wait_for_status(ENABLED)); \ \ if (fbc.supports_compressing && \ opt.fbc_check_compression) \ igt_assert(fbc_wait_for_compression()); \ } else if (flags_ & ASSERT_FBC_DISABLED) { \ igt_assert(fbc_wait_for_status(DISABLED)); \ } \ \ if (flags_ & ASSERT_PSR_ENABLED) \ igt_assert(psr_wait_for_status(ENABLED)); \ else if (flags_ & ASSERT_PSR_DISABLED) \ igt_assert(psr_wait_for_status(DISABLED)); \ } else { \ /* Make sure we settle before continuing. */ \ sleep(1); \ } \ \ /* Check CRC again to make sure the compressed screen is ok, \ * except if we're not drawing on the primary screen. On this \ * case, the first check should be enough and a new CRC check \ * would only delay the test suite while adding no value to the \ * test suite. */ \ if (t->screen == SCREEN_PRIM) \ do_crc_assertions(flags_); \ \ if (fbc.supports_last_action && opt.fbc_check_last_action) { \ if (flags_ & ASSERT_LAST_ACTION_CHANGED) \ igt_assert(fbc_last_action_changed()); \ else if (flags_ & ASSERT_NO_ACTION_CHANGE) \ igt_assert(!fbc_last_action_changed()); \ } \ \ wait_user(1, "Paused after assertions."); \ } while (0) static void enable_prim_screen_and_wait(const struct test_mode *t) { fill_fb_region(&prim_mode_params.fb, 0xFF); set_mode_for_params(&prim_mode_params); wanted_crc = &blue_crc; fbc_update_last_action(); do_assertions(ASSERT_NO_ACTION_CHANGE); } static void enable_scnd_screen_and_wait(const struct test_mode *t) { fill_fb_region(&scnd_mode_params.fb, 0x80); set_mode_for_params(&scnd_mode_params); do_assertions(ASSERT_NO_ACTION_CHANGE); } static void set_cursor_for_test(const struct test_mode *t, struct modeset_params *params) { int rc; fill_fb_region(¶ms->cursor, 0xFF0000FF); rc = drmModeMoveCursor(drm.fd, params->crtc_id, 0, 0); igt_assert(rc == 0); rc = drmModeSetCursor(drm.fd, params->crtc_id, params->cursor.fb->gem_handle, params->cursor.w, params->cursor.h); igt_assert(rc == 0); do_assertions(ASSERT_NO_ACTION_CHANGE); } static void set_sprite_for_test(const struct test_mode *t, struct modeset_params *params) { int rc; fill_fb_region(¶ms->sprite, 0xFF0000FF); rc = drmModeSetPlane(drm.fd, params->sprite_id, params->crtc_id, params->sprite.fb->fb_id, 0, 0, 0, params->sprite.w, params->sprite.h, 0, 0, params->sprite.w << 16, params->sprite.h << 16); igt_assert(rc == 0); do_assertions(ASSERT_NO_ACTION_CHANGE); } static void enable_features_for_test(const struct test_mode *t) { if (t->feature & FEATURE_FBC) fbc_enable(); if (t->feature & FEATURE_PSR) psr_enable(); } static void check_test_requirements(const struct test_mode *t) { if (t->pipes == PIPE_DUAL) igt_require_f(scnd_mode_params.connector_id, "Can't test dual pipes with the current outputs\n"); if (t->feature & FEATURE_FBC) igt_require_f(fbc.can_test, "Can't test FBC with this chipset\n"); if (t->feature & FEATURE_PSR) { igt_require_f(psr.can_test, "Can't test PSR with the current outputs\n"); igt_require_f(sink_crc.supported, "Can't test PSR without sink CRCs\n"); } if (opt.only_feature != FEATURE_COUNT) igt_require(t->feature == opt.only_feature); if (opt.only_pipes != PIPE_COUNT) igt_require(t->pipes == opt.only_pipes); } static void set_crtc_fbs(const struct test_mode *t) { switch (t->fbs) { case FBS_SINGLE: prim_mode_params.fb.fb = &fbs.prim_pri; scnd_mode_params.fb.fb = &fbs.scnd_pri; offscreen_fb.fb = &fbs.offscreen; prim_mode_params.fb.x = 0; scnd_mode_params.fb.x = 0; offscreen_fb.x = 0; prim_mode_params.fb.y = 0; scnd_mode_params.fb.y = 0; offscreen_fb.y = 0; break; case FBS_MULTI: /* Please see the comment at the top of create_big_fb(). */ prim_mode_params.fb.fb = &fbs.big; scnd_mode_params.fb.fb = &fbs.big; offscreen_fb.fb = &fbs.big; prim_mode_params.fb.x = 500; scnd_mode_params.fb.x = prim_mode_params.fb.x + prim_mode_params.fb.w; offscreen_fb.x = scnd_mode_params.fb.x + scnd_mode_params.fb.w; prim_mode_params.fb.y = 500; scnd_mode_params.fb.y = 500; offscreen_fb.y = 500; break; default: igt_assert(false); } prim_mode_params.cursor.fb = &fbs.prim_cur; prim_mode_params.sprite.fb = &fbs.prim_spr; scnd_mode_params.cursor.fb = &fbs.scnd_cur; scnd_mode_params.sprite.fb = &fbs.scnd_spr; } static void prepare_subtest(const struct test_mode *t, struct draw_pattern_info *pattern) { check_test_requirements(t); stop_busy_thread(); disable_features(); set_crtc_fbs(t); if (t->screen == SCREEN_OFFSCREEN) fill_fb_region(&offscreen_fb, 0x80); unset_all_crtcs(); init_crcs(pattern); enable_features_for_test(t); enable_prim_screen_and_wait(t); if (t->screen == SCREEN_PRIM) { if (t->plane == PLANE_CUR) set_cursor_for_test(t, &prim_mode_params); if (t->plane == PLANE_SPR) set_sprite_for_test(t, &prim_mode_params); } if (t->pipes == PIPE_SINGLE) return; enable_scnd_screen_and_wait(t); if (t->screen == SCREEN_SCND) { if (t->plane == PLANE_CUR) set_cursor_for_test(t, &scnd_mode_params); if (t->plane == PLANE_SPR) set_sprite_for_test(t, &scnd_mode_params); } } /* * rte - the basic sanity test * * METHOD * Just disable all screens, assert everything is disabled, then enable all * screens - including primary, cursor and sprite planes - and assert that * the tested feature is enabled. * * EXPECTED RESULTS * Blue screens and t->feature enabled. * * FAILURES * A failure here means that every other subtest will probably fail too. It * probably means that the Kernel is just not enabling the feature we want. */ static void rte_subtest(const struct test_mode *t) { check_test_requirements(t); disable_features(); set_crtc_fbs(t); enable_features_for_test(t); unset_all_crtcs(); do_assertions(ASSERT_FBC_DISABLED | ASSERT_PSR_DISABLED | DONT_ASSERT_CRC); enable_prim_screen_and_wait(t); set_cursor_for_test(t, &prim_mode_params); set_sprite_for_test(t, &prim_mode_params); if (t->pipes == PIPE_SINGLE) return; enable_scnd_screen_and_wait(t); set_cursor_for_test(t, &scnd_mode_params); set_sprite_for_test(t, &scnd_mode_params); } static void update_wanted_crc(const struct test_mode *t, struct both_crcs *crc) { if (t->screen == SCREEN_PRIM) wanted_crc = crc; } static bool op_disables_psr(const struct test_mode *t, enum igt_draw_method method) { if (method != IGT_DRAW_MMAP_GTT && method != IGT_DRAW_MMAP_WC) return false; if (t->screen == SCREEN_PRIM) return true; /* On FBS_MULTI, even if the target is not the PSR screen (SCREEN_PRIM), * all primary planes share the same frontbuffer, so a write to the * second screen primary plane - or offscreen plane - will touch the * framebuffer that's also used by the primary screen. */ if (t->fbs == FBS_MULTI && t->plane == PLANE_PRI) return true; return false; } /* * draw - draw a set of rectangles on the screen using the provided method * * METHOD * Just set the screens as appropriate and then start drawing a series of * rectangles on the target screen. The important guy here is the drawing * method used. * * EXPECTED RESULTS * The feature either stays enabled or gets reenabled after the oprations. You * will also see the rectangles on the target screen. * * FAILURES * A failure here indicates a problem somewhere between the Kernel's * frontbuffer tracking infrastructure or the feature itself. You need to pay * attention to which drawing method is being used. */ static void draw_subtest(const struct test_mode *t) { int r; int assertions = 0; struct draw_pattern_info *pattern; struct modeset_params *params = pick_params(t); struct fb_region *target; switch (t->screen) { case SCREEN_PRIM: if (t->method != IGT_DRAW_MMAP_GTT && t->plane == PLANE_PRI) assertions |= ASSERT_LAST_ACTION_CHANGED; else assertions |= ASSERT_NO_ACTION_CHANGE; break; case SCREEN_SCND: case SCREEN_OFFSCREEN: assertions |= ASSERT_NO_ACTION_CHANGE; break; default: igt_assert(false); } switch (t->plane) { case PLANE_PRI: pattern = &pattern1; break; case PLANE_CUR: case PLANE_SPR: pattern = &pattern2; break; default: igt_assert(false); } if (op_disables_psr(t, t->method)) assertions |= ASSERT_PSR_DISABLED; prepare_subtest(t, pattern); target = pick_target(t, params); for (r = 0; r < pattern->n_rects; r++) { igt_debug("Drawing rect %d\n", r); draw_rect(pattern, target, t->method, r); update_wanted_crc(t, &pattern->crcs[r]); do_assertions(assertions); } } /* * multidraw - draw a set of rectangles on the screen using alternated drawing * methods * * METHOD * This is just like the draw subtest, but now we keep alternating between two * drawing methods. Each time we run multidraw_subtest we will test all the * possible pairs containing t->method. * * EXPECTED RESULTS * The same as the draw subtest. * * FAILURES * If you get a failure here, first you need to check whether you also get * failures on the individual draw subtests. If yes, then go fix every single * draw subtest first. If all the draw subtests pass but this one fails, then * you have to study how one drawing method is stopping the other from * properly working. */ static void multidraw_subtest(const struct test_mode *t) { int r; int assertions = 0; struct draw_pattern_info *pattern; struct modeset_params *params = pick_params(t); struct fb_region *target; enum igt_draw_method m, used_method; uint32_t color; switch (t->plane) { case PLANE_PRI: pattern = &pattern1; break; case PLANE_CUR: case PLANE_SPR: pattern = &pattern2; break; default: igt_assert(false); } prepare_subtest(t, pattern); target = pick_target(t, params); for (m = 0; m < IGT_DRAW_METHOD_COUNT; m++) { if (m == t->method) continue; igt_debug("Method %s\n", igt_draw_get_method_name(m)); for (r = 0; r < pattern->n_rects; r++) { used_method = (r % 2 == 0) ? t->method : m; igt_debug("Used method %s\n", igt_draw_get_method_name(used_method)); draw_rect(pattern, target, used_method, r); update_wanted_crc(t, &pattern->crcs[r]); assertions = used_method != IGT_DRAW_MMAP_GTT ? ASSERT_LAST_ACTION_CHANGED : ASSERT_NO_ACTION_CHANGE; if (op_disables_psr(t, used_method)) assertions |= ASSERT_PSR_DISABLED; do_assertions(assertions); } switch (t->plane) { case PLANE_PRI: color = 0xFF; break; case PLANE_CUR: case PLANE_SPR: color = 0xFF0000FF; break; default: igt_assert(false); } fill_fb_region(target, color); update_wanted_crc(t, &blue_crc); do_assertions(ASSERT_NO_ACTION_CHANGE); } } /* * flip - just exercise page flips with the patterns we have * * METHOD * We draw the pattern on a backbuffer using the provided method, then we * flip, making this the frontbuffer. * * EXPECTED RESULTS * Everything works as expected, screen contents are properly updated. * * FAILURES * On a failure here you need to go directly to the Kernel's flip code and see * how it interacts with the feature being tested. */ static void flip_subtest(const struct test_mode *t) { int r, rc; int assertions = 0; struct igt_fb fb2, *orig_fb; struct modeset_params *params = pick_params(t); struct draw_pattern_info *pattern = &pattern1; uint32_t bg_color; switch (t->screen) { case SCREEN_PRIM: assertions |= ASSERT_LAST_ACTION_CHANGED; bg_color = 0xFF; break; case SCREEN_SCND: assertions |= ASSERT_NO_ACTION_CHANGE; bg_color = 0x80; break; default: igt_assert(false); } prepare_subtest(t, pattern); igt_create_fb(drm.fd, params->fb.fb->width, params->fb.fb->height, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fb2); igt_draw_fill_fb(drm.fd, &fb2, bg_color); orig_fb = params->fb.fb; for (r = 0; r < pattern->n_rects; r++) { params->fb.fb = (r % 2 == 0) ? &fb2 : orig_fb; if (r != 0) draw_rect(pattern, ¶ms->fb, t->method, r - 1); draw_rect(pattern, ¶ms->fb, t->method, r); update_wanted_crc(t, &pattern->crcs[r]); rc = drmModePageFlip(drm.fd, params->crtc_id, params->fb.fb->fb_id, 0, NULL); igt_assert(rc == 0); do_assertions(assertions); } igt_remove_fb(drm.fd, &fb2); } /* * move - just move the sprite or cursor around * * METHOD * Move the surface around, following the defined pattern. * * EXPECTED RESULTS * The move operations are properly detected by the Kernel, and the screen is * properly updated every time. * * FAILURES * If you get a failure here, check how the Kernel is enabling or disabling * your feature when it moves the planes around. */ static void move_subtest(const struct test_mode *t) { int r, rc; int assertions = ASSERT_NO_ACTION_CHANGE; struct modeset_params *params = pick_params(t); struct draw_pattern_info *pattern = &pattern3; bool repeat = false; prepare_subtest(t, pattern); /* Just paint the right color since we start at 0x0. */ draw_rect(pattern, pick_target(t, params), t->method, 0); update_wanted_crc(t, &pattern->crcs[0]); do_assertions(assertions); for (r = 1; r < pattern->n_rects; r++) { struct rect rect = pattern->get_rect(¶ms->fb, r); switch (t->plane) { case PLANE_CUR: rc = drmModeMoveCursor(drm.fd, params->crtc_id, rect.x, rect.y); igt_assert(rc == 0); break; case PLANE_SPR: rc = drmModeSetPlane(drm.fd, params->sprite_id, params->crtc_id, params->sprite.fb->fb_id, 0, rect.x, rect.y, rect.w, rect.h, 0, 0, rect.w << 16, rect.h << 16); igt_assert(rc == 0); break; default: igt_assert(false); } update_wanted_crc(t, &pattern->crcs[r]); do_assertions(assertions); /* "Move" the last rect to the same position just to make sure * this works too. */ if (r+1 == pattern->n_rects && !repeat) { repeat = true; r--; } } } /* * onoff - just enable and disable the sprite or cursor plane a few times * * METHOD * Just enable and disable the desired plane a few times. * * EXPECTED RESULTS * Everything is properly detected by the Kernel and the screen contents are * accurate. * * FAILURES * As usual, if you get a failure here you need to check how the feature is * being handled when the planes are enabled or disabled. */ static void onoff_subtest(const struct test_mode *t) { int r, rc; int assertions = ASSERT_NO_ACTION_CHANGE; struct modeset_params *params = pick_params(t); struct draw_pattern_info *pattern = &pattern3; prepare_subtest(t, pattern); /* Just paint the right color since we start at 0x0. */ draw_rect(pattern, pick_target(t, params), t->method, 0); update_wanted_crc(t, &pattern->crcs[0]); do_assertions(assertions); for (r = 0; r < 4; r++) { if (r % 2 == 0) { switch (t->plane) { case PLANE_CUR: rc = drmModeSetCursor(drm.fd, params->crtc_id, 0, 0, 0); igt_assert(rc == 0); break; case PLANE_SPR: rc = drmModeSetPlane(drm.fd, params->sprite_id, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); igt_assert(rc == 0); break; default: igt_assert(false); } update_wanted_crc(t, &blue_crc); } else { switch (t->plane) { case PLANE_CUR: rc = drmModeSetCursor(drm.fd, params->crtc_id, params->cursor.fb->gem_handle, params->cursor.w, params->cursor.h); igt_assert(rc == 0); break; case PLANE_SPR: rc = drmModeSetPlane(drm.fd, params->sprite_id, params->crtc_id, params->sprite.fb->fb_id, 0, 0, 0, params->sprite.w, params->sprite.h, 0, 0, params->sprite.w << 16, params->sprite.h << 16); igt_assert(rc == 0); break; default: igt_assert(false); } update_wanted_crc(t, &pattern->crcs[0]); } do_assertions(assertions); } } /* * fullscreen_plane - put a fullscreen plane covering the whole screen * * METHOD * As simple as the description above. * * EXPECTED RESULTS * It depends on the feature being tested. FBC gets disabled, but PSR doesn't. * * FAILURES * Again, if you get failures here you need to dig into the Kernel code, see * how it is handling your feature on this specific case. */ static void fullscreen_plane_subtest(const struct test_mode *t) { struct draw_pattern_info *pattern = &pattern4; struct igt_fb fullscreen_fb; struct rect rect; struct modeset_params *params = pick_params(t); int assertions; int rc; prepare_subtest(t, pattern); rect = pattern->get_rect(¶ms->fb, 0); igt_create_fb(drm.fd, rect.w, rect.h, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fullscreen_fb); igt_draw_fill_fb(drm.fd, &fullscreen_fb, rect.color); rc = drmModeSetPlane(drm.fd, params->sprite_id, params->crtc_id, fullscreen_fb.fb_id, 0, 0, 0, fullscreen_fb.width, fullscreen_fb.height, 0, 0, fullscreen_fb.width << 16, fullscreen_fb.height << 16); igt_assert(rc == 0); update_wanted_crc(t, &pattern->crcs[0]); switch (t->screen) { case SCREEN_PRIM: assertions = ASSERT_FBC_DISABLED | ASSERT_LAST_ACTION_CHANGED; break; case SCREEN_SCND: assertions = ASSERT_NO_ACTION_CHANGE; break; default: igt_assert(false); } do_assertions(assertions); rc = drmModeSetPlane(drm.fd, params->sprite_id, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); igt_assert(rc == 0); if (t->screen == SCREEN_PRIM) assertions = ASSERT_LAST_ACTION_CHANGED; update_wanted_crc(t, &blue_crc); do_assertions(assertions); igt_remove_fb(drm.fd, &fullscreen_fb); } /** * modesetfrombusy - modeset from a busy buffer to a non-busy buffer * * METHOD * Set a mode, make the frontbuffer busy using BLT writes, do a modeset to a * non-busy buffer, then check if the features are enabled. The goal of this * test is to exercise a bug we had on the frontbuffer tracking infrastructure * code. * * EXPECTED RESULTS * No assertions fail. * * FAILURES * If you're failing this test, then you probably need "drm/i915: Clear * fb_tracking.busy_bits also for synchronous flips" or any other patch that * properly updates dev_priv->fb_tracking.busy_bits when we're alternating * between buffers with different busyness. */ static void modesetfrombusy_subtest(const struct test_mode *t) { struct draw_pattern_info *pattern = &pattern1; struct modeset_params *params = pick_params(t); struct igt_fb fb2; prepare_subtest(t, pattern); igt_create_fb(drm.fd, params->fb.fb->width, params->fb.fb->height, DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fb2); igt_draw_fill_fb(drm.fd, &fb2, 0xFF); start_busy_thread(params->fb.fb); usleep(10000); unset_all_crtcs(); params->fb.fb = &fb2; set_mode_for_params(params); do_assertions(0); stop_busy_thread(); igt_remove_fb(drm.fd, &fb2); } static int opt_handler(int option, int option_index, void *data) { switch (option) { case 's': opt.check_status = false; break; case 'c': opt.check_crc = false; break; case 'o': opt.fbc_check_compression = false; break; case 'a': opt.fbc_check_last_action = false; break; case 'e': opt.no_edp = true; break; case 'm': opt.small_modes = true; break; case 'i': opt.show_hidden = true; break; case 't': opt.step++; break; case 'n': igt_assert(opt.only_feature == FEATURE_COUNT); opt.only_feature = FEATURE_NONE; break; case 'f': igt_assert(opt.only_feature == FEATURE_COUNT); opt.only_feature = FEATURE_FBC; break; case 'p': igt_assert(opt.only_feature == FEATURE_COUNT); opt.only_feature = FEATURE_PSR; break; case '1': igt_assert(opt.only_pipes == PIPE_COUNT); opt.only_pipes = PIPE_SINGLE; break; case '2': igt_assert(opt.only_pipes == PIPE_COUNT); opt.only_pipes = PIPE_DUAL; break; default: igt_assert(false); } return 0; } const char *help_str = " --no-status-check Don't check for enable/disable status\n" " --no-crc-check Don't check for CRC values\n" " --no-fbc-compression-check Don't check for the FBC compression status\n" " --no-fbc-action-check Don't check for the FBC last action\n" " --no-edp Don't use eDP monitors\n" " --use-small-modes Use smaller resolutions for the modes\n" " --show-hidden Show hidden subtests\n" " --step Stop on each step so you can check the screen\n" " --nop-only Only run the \"nop\" feature subtests\n" " --fbc-only Only run the \"fbc\" feature subtests\n" " --psr-only Only run the \"psr\" feature subtests\n" " --1p-only Only run subtests that use 1 pipe\n" " --2p-only Only run subtests that use 2 pipes\n"; static const char *pipes_str(int pipes) { switch (pipes) { case PIPE_SINGLE: return "1p"; case PIPE_DUAL: return "2p"; default: igt_assert(false); } } static const char *screen_str(int screen) { switch (screen) { case SCREEN_PRIM: return "primscrn"; case SCREEN_SCND: return "scndscrn"; case SCREEN_OFFSCREEN: return "offscren"; default: igt_assert(false); } } static const char *plane_str(int plane) { switch (plane) { case PLANE_PRI: return "pri"; case PLANE_CUR: return "cur"; case PLANE_SPR: return "spr"; default: igt_assert(false); } } static const char *fbs_str(int fb) { switch (fb) { case FBS_SINGLE: return "sfb"; case FBS_MULTI: return "mfb"; default: igt_assert(false); } } static const char *feature_str(int feature) { switch (feature) { case FEATURE_NONE: return "nop"; case FEATURE_FBC: return "fbc"; case FEATURE_PSR: return "psr"; case FEATURE_FBC | FEATURE_PSR: return "fbcpsr"; default: igt_assert(false); } } #define TEST_MODE_ITER_BEGIN(t) \ for (t.feature = 0; t.feature < FEATURE_COUNT; t.feature++) { \ for (t.pipes = 0; t.pipes < PIPE_COUNT; t.pipes++) { \ for (t.screen = 0; t.screen < SCREEN_COUNT; t.screen++) { \ for (t.plane = 0; t.plane < PLANE_COUNT; t.plane++) { \ for (t.fbs = 0; t.fbs < FBS_COUNT; t.fbs++) { \ for (t.method = 0; t.method < IGT_DRAW_METHOD_COUNT; t.method++) { \ if (t.pipes == PIPE_SINGLE && t.screen == SCREEN_SCND) \ continue; \ if (t.screen == SCREEN_OFFSCREEN && t.plane != PLANE_PRI) \ continue; \ if (!opt.show_hidden && t.pipes == PIPE_DUAL && \ t.screen == SCREEN_OFFSCREEN) \ continue; \ if ((!opt.show_hidden && opt.only_feature != FEATURE_NONE) \ && t.feature == FEATURE_NONE) \ continue; #define TEST_MODE_ITER_END } } } } } } int main(int argc, char *argv[]) { struct test_mode t; struct option long_options[] = { { "no-status-check", 0, 0, 's'}, { "no-crc-check", 0, 0, 'c'}, { "no-fbc-compression-check", 0, 0, 'o'}, { "no-fbc-action-check", 0, 0, 'a'}, { "no-edp", 0, 0, 'e'}, { "use-small-modes", 0, 0, 'm'}, { "show-hidden", 0, 0, 'i'}, { "step", 0, 0, 't'}, { "nop-only", 0, 0, 'n'}, { "fbc-only", 0, 0, 'f'}, { "psr-only", 0, 0, 'p'}, { "1p-only", 0, 0, '1'}, { "2p-only", 0, 0, '2'}, { 0, 0, 0, 0 } }; igt_subtest_init_parse_opts(&argc, argv, "", long_options, help_str, opt_handler, NULL); igt_fixture setup_environment(); for (t.feature = 0; t.feature < FEATURE_COUNT; t.feature++) { if ((!opt.show_hidden && opt.only_feature != FEATURE_NONE) && t.feature == FEATURE_NONE) continue; for (t.pipes = 0; t.pipes < PIPE_COUNT; t.pipes++) { t.screen = SCREEN_PRIM; t.plane = PLANE_PRI; t.fbs = FBS_SINGLE; /* Make sure nothing is using this value. */ t.method = -1; igt_subtest_f("%s-%s-rte", feature_str(t.feature), pipes_str(t.pipes)) rte_subtest(&t); } } TEST_MODE_ITER_BEGIN(t) igt_subtest_f("%s-%s-%s-%s-%s-draw-%s", feature_str(t.feature), pipes_str(t.pipes), screen_str(t.screen), plane_str(t.plane), fbs_str(t.fbs), igt_draw_get_method_name(t.method)) draw_subtest(&t); TEST_MODE_ITER_END TEST_MODE_ITER_BEGIN(t) if (t.plane != PLANE_PRI) continue; if (t.screen == SCREEN_OFFSCREEN) continue; if (!opt.show_hidden && t.method != IGT_DRAW_BLT) continue; igt_subtest_f("%s-%s-%s-%s-flip-%s", feature_str(t.feature), pipes_str(t.pipes), screen_str(t.screen), fbs_str(t.fbs), igt_draw_get_method_name(t.method)) flip_subtest(&t); TEST_MODE_ITER_END TEST_MODE_ITER_BEGIN(t) if (t.screen == SCREEN_OFFSCREEN) continue; if (t.method != IGT_DRAW_BLT) continue; if (t.plane == PLANE_PRI) continue; igt_subtest_f("%s-%s-%s-%s-%s-move", feature_str(t.feature), pipes_str(t.pipes), screen_str(t.screen), plane_str(t.plane), fbs_str(t.fbs)) move_subtest(&t); igt_subtest_f("%s-%s-%s-%s-%s-onoff", feature_str(t.feature), pipes_str(t.pipes), screen_str(t.screen), plane_str(t.plane), fbs_str(t.fbs)) onoff_subtest(&t); TEST_MODE_ITER_END TEST_MODE_ITER_BEGIN(t) if (t.screen == SCREEN_OFFSCREEN) continue; if (t.method != IGT_DRAW_BLT) continue; if (t.plane != PLANE_SPR) continue; igt_subtest_f("%s-%s-%s-%s-%s-fullscreen", feature_str(t.feature), pipes_str(t.pipes), screen_str(t.screen), plane_str(t.plane), fbs_str(t.fbs)) fullscreen_plane_subtest(&t); TEST_MODE_ITER_END TEST_MODE_ITER_BEGIN(t) if (t.screen != SCREEN_PRIM) continue; if (!opt.show_hidden && t.fbs != FBS_SINGLE) continue; igt_subtest_f("%s-%s-%s-%s-multidraw-%s", feature_str(t.feature), pipes_str(t.pipes), plane_str(t.plane), fbs_str(t.fbs), igt_draw_get_method_name(t.method)) multidraw_subtest(&t); TEST_MODE_ITER_END TEST_MODE_ITER_BEGIN(t) if (t.pipes != PIPE_SINGLE) continue; if (t.screen != SCREEN_PRIM) continue; if (t.plane != PLANE_PRI) continue; if (t.fbs != FBS_SINGLE) continue; if (t.method != IGT_DRAW_MMAP_CPU) continue; igt_subtest_f("%s-modesetfrombusy", feature_str(t.feature)) modesetfrombusy_subtest(&t); TEST_MODE_ITER_END /* * TODO: ideas for subtests: * - Add a new enum to struct test_mode that allows us to specify the * BPP/depth configuration. */ igt_fixture teardown_environment(); igt_exit(); }