linux.git/arch/arm/Kconfig, branch master

Merge tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes

2017-01-04T15:12:17+00:00

Samsung mach/soc update for v4.10: 1. Minor cleanup in smp_operations. 2. Another step in switching s3c24xx to new DMA API. 3. Drop fixed requirement for HZ=200 on Samsung platforms. * tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: Drop fixed 200 Hz timer requirement from Samsung platforms ARM: S3C24XX: Add DMA slave maps for remaining s3c24xx SoCs ARM: EXYNOS: Remove smp_init_cpus hook from platsmp.c

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-12-15T23:39:02+00:00

Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...

ARM: Drop fixed 200 Hz timer requirement from Samsung platforms

2016-12-07T16:42:11+00:00

All Samsung platforms, including the Exynos, are selecting HZ_FIXED with 200 Hz. Unfortunately in case of multiplatform image this affects also other platforms when Exynos is enabled. This looks like an very old legacy code, dating back to initial upstreaming of S3C24xx. Probably it was required for s3c24xx timer driver, which was removed in commit ad38bdd15d5b ("ARM: SAMSUNG: Remove unused plat-samsung/time.c"). Since then, this fixed 200 Hz spread everywhere, including out-of-tree Samsung kernels (SoC vendor's and Tizen's). I believe this choice was rather an effect of coincidence instead of conscious choice. On S3C24xx, the PWM counter is only 16 bit wide, and with the typical 12MHz input clock that overflows every 5.5ms. This works with HZ=200 or higher but not with HZ=100 which needs a 10ms interval between ticks. On Later chips (S3C64xx, S5P and EXYNOS), the counter is 32 bits and does not have this problem. The new samsung_pwm_timer driver solves the problem by scaling the input clock by a factor of 50 on S3C24xx, which makes it less accurate but allows HZ=100 as well as CONFIG_NO_HZ with fewer wakeups. Few perf mem and sched tests on Odroid XU3 board (Exynos5422, 4x Cortex A7, 4x Cortex A15) show no regressions when switching from 200 Hz to other values. Reported-by: Lee Jones [Dropping of 200_HZ from S3C/S5P was suggested by Arnd] Reported-by: Arnd Bergmann Cc: Kukjin Kim Signed-off-by: Krzysztof Kozlowski [Tested on Exynos5800] Tested-by: Javier Martinez Canillas Acked-by: Kukjin Kim [Tested on S3C2440] Tested-by: Sylwester Nawrocki Acked-by: Lee Jones

ARM: virt: Select ARM_GIC_V3_ITS

2016-11-29T09:14:49+00:00

This patch allows ARM guests to use GICv3 ITS on an arm64 host Signed-off-by: Vladimir Murzin Signed-off-by: Marc Zyngier

ARM: Kconfig: Introduce MACH_STM32F746 flag

2016-11-15T11:02:59+00:00

This patch introduces the MACH_STM32F746 to make possible to only select STM32F746 pinctrl driver By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig. Signed-off-by: Alexandre TORGUE

Merge branch 'akpm' (patches from Andrew)

2016-10-08T04:38:00+00:00

Merge updates from Andrew Morton: - fsnotify updates - ocfs2 updates - all of MM * emailed patches from Andrew Morton : (127 commits) console: don't prefer first registered if DT specifies stdout-path cred: simpler, 1D supplementary groups CREDITS: update Pavel's information, add GPG key, remove snail mail address mailmap: add Johan Hovold .gitattributes: set git diff driver for C source code files uprobes: remove function declarations from arch/{mips,s390} spelling.txt: "modeled" is spelt correctly nmi_backtrace: generate one-line reports for idle cpus arch/tile: adopt the new nmi_backtrace framework nmi_backtrace: do a local dump_stack() instead of a self-NMI nmi_backtrace: add more trigger_*_cpu_backtrace() methods min/max: remove sparse warnings when they're nested Documentation/filesystems/proc.txt: add more description for maps/smaps mm, proc: fix region lost in /proc/self/smaps proc: fix timerslack_ns CAP_SYS_NICE check when adjusting self proc: add LSM hook checks to /proc//timerslack_ns proc: relax /proc//timerslack_ns capability requirements meminfo: break apart a very long seq_printf with #ifdefs seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char proc: faster /proc/*/status ...

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-10-08T04:16:16+00:00

Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...

atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE

2016-10-08T01:46:30+00:00

This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Ralf Baechle Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: "David S. Miller" Cc: Chris Metcalf Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Vineet Gupta Cc: Zhaoxiu Zeng Cc: Linus Walleij Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Herbert Xu Cc: Ming Lin Cc: Arnd Bergmann Cc: Geert Uytterhoeven Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Andi Kleen Cc: Boqun Feng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-10-04T02:10:15+00:00

Pull irq updates from Thomas Gleixner: "The irq departement proudly presents: - A rework of the core infrastructure to optimally spread interrupt for multiqueue devices. The first version was a bit naive and failed to take thread siblings and other details into account. Developed in cooperation with Christoph and Keith. - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is active then no further softirq processsing on interrupt return happens. Otherwise we try to delegate and still run another batch of network packets in the irq return path, which then tries to delegate to ksoftirqd ..... - A proper machine parseable sysfs based alternative for /proc/interrupts. - ACPI support for the GICV3-ITS and ARM interrupt remapping - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC - A new irq chip for the JCore (SuperH) - The usual pile of small fixlets in core and irqchip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) softirq: Let ksoftirqd do its job genirq: Make function __irq_do_set_handler() static ARM/dts: Add EXTI controller node to stm32f429 ARM/STM32: Select external interrupts controller drivers/irqchip: Add STM32 external interrupts support Documentation/dt-bindings: Document STM32 EXTI controller bindings irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs pci/msi: Retrieve affinity for a vector genirq/affinity: Remove old irq spread infrastructure genirq/msi: Switch to new irq spreading infrastructure genirq/affinity: Provide smarter irq spreading infrastructure genirq/msi: Add cpumask allocation to alloc_msi_entry genirq: Expose interrupt information through sysfs irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI irqchip/gicv3-its: Probe ITS in the ACPI way irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI irqchip/gicv3-its: Cleanup for ITS domain initialization PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table ACPI: Add new IORT functions to support MSI domain handling ...

arm/arm64: arch_timer: Use archdata to indicate vdso suitability

2016-09-23T16:19:25+00:00

Instead of comparing the name to a magic string, use archdata to explicitly communicate whether the arch timer is suitable for direct vdso access. Acked-by: Will Deacon Acked-by: Russell King Acked-by: Marc Zyngier Signed-off-by: Scott Wood Signed-off-by: Will Deacon