linux.git/arch/arm/boot/dts/sama5d3.dtsi, branch vm-bind

ARM: dts: at91: Use the generic "crypto" node name for the crypto IPs

2022-02-24T18:30:41+00:00

The DT specification recommeds that: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model. If appropriate, the name should be one of the following choices:" "crypto" being the recommendation for the crypto nodes. Follow the DT recommendation and use the generic "crypto" node name for the at91 crypto IPs. While at this, add labels to the crypto nodes where they missed, for easier reference purposes. Signed-off-by: Tudor Ambarus Acked-by: Krzysztof Kozlowski Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20220208111225.234685-1-tudor.ambarus@microchip.com

ARM: dts: at91: Fix a typo

2021-04-02T12:58:56+00:00

s/conlicts/conflicts/ Signed-off-by: Bhaskar Chowdhury Acked-by: Randy Dunlap Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210318095237.28436-1-unixbhaskar@gmail.com

ARM: dts: at91: remove deprecated ADC properties

2020-12-01T20:11:26+00:00

atmel,adc-res, atmel,adc-res-names and the trigger nodes are not parsed by the driver anymore and the information is now defined in the driver data. Also remove the leftover #address-cells and #size-cells that were used when the trigger nodes had a unit-address. Finally, the default is already to use the highest resoution. Remove atmel,adc-use-res from the SoC dtsi. Signed-off-by: Alexandre Belloni Reviewed-by: Ludovic Desroches Link: https://lore.kernel.org/r/20201128222818.1910764-11-alexandre.belloni@bootlin.com

ARM: dts: at91: sama5d3: use proper ADC compatible

2020-12-01T20:11:10+00:00

The ADC is different from the at91sam9x5 ADC. Not only it doesn't have the same resolution but it even has only one and the LOWRES bit doesn't exist. Signed-off-by: Alexandre Belloni Reviewed-by: Ludovic Desroches Link: https://lore.kernel.org/r/20201128222818.1910764-9-alexandre.belloni@bootlin.com

ARM: dts: at91: add unit-address to memory node

2020-09-16T08:45:32+00:00

The memory node requires a unit-address, add it. Signed-off-by: Alexandre Belloni Reviewed-by: Nicolas Ferre Link: https://lore.kernel.org/r/20200831171129.3886857-7-alexandre.belloni@bootlin.com

ARM: dts: at91: fix sram nodes

2020-09-03T08:09:34+00:00

The ranges, #address-cells and #size-cells properties are mandatory, add them to the sram nodes. Signed-off-by: Alexandre Belloni Reviewed-by: Nicolas Ferre Link: https://lore.kernel.org/r/20200831171129.3886857-4-alexandre.belloni@bootlin.com

Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-06-07T16:42:16+00:00

Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...

ARM: dts: at91: Remove the USB EP child node

2020-05-25T08:09:42+00:00

The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. Then the EP child node are useless and describe as deprecated in the documentation binding: remove all the nodes from the SoC device tree file. Remove also the #address-cells and #size-cells properties that are no longer needed. Signed-off-by: Gregory CLEMENT Signed-off-by: Felipe Balbi

ARM: dts: at91: Configure I2C SCL gpio as open drain

2020-05-15T15:38:54+00:00

The SCL gpio pin used by I2C bus for recovery needs to be configured as open drain. Fixes: 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl") Fixes: a4bd8da893a3 ("ARM: dts: at91: sama5d3: add i2c gpio pinctrl") Fixes: 8fb82f050cf6 ("ARM: dts: at91: sama5d4: add i2c gpio pinctrl") Signed-off-by: Codrin Ciubotariu Link: https://lore.kernel.org/r/20200515140001.287932-1-codrin.ciubotariu@microchip.com Signed-off-by: Alexandre Belloni

ARM: dts: at91: sama5d3: switch to new clock bindings

2020-04-13T11:00:08+00:00

Switch sama5d3 boards to the new PMC clock bindings. This prevents the wb50n to use the out of spec rate for USART1. Link: https://lore.kernel.org/r/20200110222744.1261464-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni