linux.git/arch/arm64/include/asm/Kbuild, branch master

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2016-12-14T00:39:21+00:00

Pull arm64 updates from Catalin Marinas: - struct thread_info moved off-stack (also touching include/linux/thread_info.h and include/linux/restart_block.h) - cpus_have_cap() reworked to avoid __builtin_constant_p() for static key use (also touching drivers/irqchip/irq-gic-v3.c) - uprobes support (currently only for native 64-bit tasks) - Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1 switching to a reserved page table - CPU capacity information passing via DT or sysfs (used by the scheduler) - support for systems without FP/SIMD (IOW, kernel avoids touching these registers; there is no soft-float ABI, nor kernel emulation for AArch64 FP/SIMD) - handling of hardware watchpoint with unaligned addresses, varied lengths and offsets from base - use of the page table contiguous hint for kernel mappings - hugetlb fixes for sizes involving the contiguous hint - remove unnecessary I-cache invalidation in flush_cache_range() - CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1) - boot-time checks for writable+executable kernel mappings - simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart and make the arm64 kernel headers self-consistent (Xen headers patch merged separately) - Workaround for broken .inst support in certain binutils versions * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits) arm64: Disable PAN on uaccess_enable() arm64: Work around broken .inst when defective gas is detected arm64: Add detection code for broken .inst support in binutils arm64: Remove reference to asm/opcodes.h arm64: Get rid of asm/opcodes.h arm64: smp: Prevent raw_smp_processor_id() recursion arm64: head.S: Fix CNTHCTL_EL2 access on VHE system arm64: Remove I-cache invalidation from flush_cache_range() arm64: Enable HIBERNATION in defconfig arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN arm64: xen: Enable user access before a privcmd hvc call arm64: Handle faults caused by inadvertent user access with PAN enabled arm64: Disable TTBR0_EL1 during normal kernel execution arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1 arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro arm64: Factor out PAN enabling/disabling into separate uaccess_* macros arm64: Update the synchronous external abort fault description selftests: arm64: add test for unaligned/inexact watchpoint handling arm64: Allow hw watchpoint of length 3,5,6 and 7 arm64: hw_breakpoint: Handle inexact watchpoint addresses ...

arm64: split thread_info from task stack

2016-11-11T18:25:46+00:00

This patch moves arm64's struct thread_info from the task stack into task_struct. This protects thread_info from corruption in the case of stack overflows, and makes its address harder to determine if stack addresses are leaked, making a number of attacks more difficult. Precise detection and handling of overflow is left for subsequent patches. Largely, this involves changing code to store the task_struct in sp_el0, and acquire the thread_info from the task struct. Core code now implements current_thread_info(), and as noted in this relies on offsetof(task_struct, thread_info) == 0, enforced by core code. This change means that the 'tsk' register used in entry.S now points to a task_struct, rather than a thread_info as it used to. To make this clear, the TI_* field offsets are renamed to TSK_TI_*, with asm-offsets appropriately updated to account for the structural change. Userspace clobbers sp_el0, and we can no longer restore this from the stack. Instead, the current task is cached in a per-cpu variable that we can safely access from early assembly as interrupts are disabled (and we are thus not preemptible). Both secondary entry and idle are updated to stash the sp and task pointer separately. Signed-off-by: Mark Rutland Tested-by: Laura Abbott Cc: AKASHI Takahiro Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: James Morse Cc: Kees Cook Cc: Suzuki K Poulose Cc: Will Deacon Signed-off-by: Catalin Marinas

locking/mutex: Kill arch specific code

2016-10-25T09:31:51+00:00

Its all generic atomic_long_t stuff now. Tested-by: Jason Low Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

arm64: Remove shadowed asm-generic headers

2016-09-09T14:05:08+00:00

We've grown our own versions of bug.h, ftrace.h, pci.h and topology.h, so generating the generic ones as well is unnecessary and a potential source of build hiccups. At the very least, having them present has confused my source-indexing tool, and that simply will not do. Signed-off-by: Robin Murphy Signed-off-by: Will Deacon

arm64: Create sections.h

2016-08-25T17:00:29+00:00

Each time new section markers are added, kernel/vmlinux.ld.S is updated, and new extern char __start_foo[] definitions are scattered through the tree. Create asm/include/sections.h to collect these definitions (and include the existing asm-generic version). Signed-off-by: James Morse Reviewed-by: Mark Rutland Tested-by: Mark Rutland Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon

arm64: Implement optimised IP checksum helpers

2016-06-21T14:09:11+00:00

AArch64 is capable of 128-bit memory accesses without alignment restrictions, which makes it both possible and highly practical to slurp up a typical 20-byte IP header in just 2 loads. Implement our own version of ip_fast_checksum() to take advantage of that, resulting in considerably fewer instructions and memory accesses than the generic version. We can also get more optimal code generation for csum_fold() by defining it a slightly different way round from the generic version, so throw that into the mix too. Suggested-by: Luke Starrett Acked-by: Luke Starrett Signed-off-by: Robin Murphy Signed-off-by: Catalin Marinas

ARM64: PCI: Remove generated include of asm-generic/pci-bridge.h

2016-02-05T22:29:12+00:00

arm64 generates asm/pci-bridge.h, which merely includes the now-empty asm-generic/pci-bridge.h. Stop generating asm/pci-bridge.h, and stop including it. Signed-off-by: Bjorn Helgaas Acked-by: Will Deacon

mm: clean up per architecture MM hook header files

2015-07-17T23:39:53+00:00

Commit 2ae416b142b6 ("mm: new mm hook framework") introduced an empty header file (mm-arch-hooks.h) for every architecture, even those which doesn't need to define mm hooks. As suggested by Geert Uytterhoeven, this could be cleaned through the use of a generic header file included via each per architecture asm/include/Kbuild file. The PowerPC architecture is not impacted here since this architecture has to defined the arch_remap MM hook. Signed-off-by: Laurent Dufour Suggested-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Acked-by: Vineet Gupta Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

remove scatterlist.h generation from arch Kbuild files

2015-05-19T15:14:34+00:00

Signed-off-by: Christoph Hellwig Reported-by: Geert Uytterhoeven Signed-off-by: Jens Axboe

Merge branch 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-12-16T01:30:09+00:00

Pull irq domain ARM updates from Thomas Gleixner: "This set of changes make use of hierarchical irqdomains to provide: - MSI/ITS support for GICv3 - MSI support for GICv2m - Interrupt polarity extender for GICv1 Marc has come more cleanups for the existing extension hooks of GIC in the pipeline, but they are going to be 3.20 material" * 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) irqchip: gicv3-its: Fix ITT allocation irqchip: gicv3-its: Move some alloc/free code to activate/deactivate irqchip: gicv3-its: Fix domain free in multi-MSI case irqchip: gic: Remove warning by including linux/irqdomain.h irqchip: gic-v2m: Add DT bindings for GICv2m irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell irqchip: mtk-sysirq: dt-bindings: Add bindings for mediatek sysirq irqchip: mtk-sysirq: Add sysirq interrupt polarity support irqchip: gic: Support hierarchy irq domain. irqchip: GICv3: Binding updates for ITS irqchip: GICv3: ITS: enable compilation of the ITS driver irqchip: GICv3: ITS: plug ITS init into main GICv3 code irqchip: GICv3: ITS: DT probing and initialization irqchip: GICv3: ITS: MSI support irqchip: GICv3: ITS: device allocation and configuration irqchip: GICv3: ITS: tables allocators irqchip: GICv3: ITS: LPI allocator irqchip: GICv3: ITS: irqchip implementation irqchip: GICv3: ITS command queue irqchip: GICv3: rework redistributor structure ...