linux.git/arch/mn10300/kernel, branch master

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12+00:00

There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2016-10-12T06:38:39+00:00

Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30+00:00

When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf Acked-by: Peter Zijlstra (Intel) Tested-by: Peter Zijlstra (Intel) Tested-by: Daniel Thompson [arm] Tested-by: Petr Mladek Cc: Aaron Tomlin Cc: Peter Zijlstra (Intel) Cc: "Rafael J. Wysocki" Cc: Russell King Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mn10300: finish verify_area() off

2016-09-28T01:15:20+00:00

Signed-off-by: Al Viro

Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-08-05T13:48:22+00:00

Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...

mn10300: use RTC_DRV_CMOS instead of CONFIG_RTC

2016-06-25T23:20:08+00:00

nn10300 has a dependency on mc146818_get_time/mc146818_set_time, which we want to move from the mc146818rtc.h header into the rtc subsystem, which in turn is not usable on mn10300. This changes mn10300 to use the modern rtc-cmos driver instead of the old RTC driver, and that in turn lets us completely remove the read_persistent_clock/update_persistent_clock callbacks. Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni

Clarify naming of thread info/stack allocators

2016-06-24T22:09:37+00:00

We've had the thread info allocated together with the thread stack for most architectures for a long time (since the thread_info was split off from the task struct), but that is about to change. But the patches that move the thread info to be off-stack (and a part of the task struct instead) made it clear how confused the allocator and freeing functions are. Because the common case was that we share an allocation with the thread stack and the thread_info, the two pointers were identical. That identity then meant that we would have things like ti = alloc_thread_info_node(tsk, node); ... tsk->stack = ti; which certainly _worked_ (since stack and thread_info have the same value), but is rather confusing: why are we assigning a thread_info to the stack? And if we move the thread_info away, the "confusing" code just gets to be entirely bogus. So remove all this confusion, and make it clear that we are doing the stack allocation by renaming and clarifying the function names to be about the stack. The fact that the thread_info then shares the allocation is an implementation detail, and not really about the allocation itself. This is a pure renaming and type fix: we pass in the same pointer, it's just that we clarify what the pointer means. The ia64 code that actually only has one single allocation (for all of task_struct, thread_info and kernel thread stack) now looks a bit odd, but since "tsk->stack" is actually not even used there, that oddity doesn't matter. It would be a separate thing to clean that up, I intentionally left the ia64 changes as a pure brute-force renaming and type change. Acked-by: Andy Lutomirski Signed-off-by: Linus Torvalds

char/genrtc: remove mn10300 support

2016-06-03T22:23:03+00:00

The genrtc driver serves no purpose on mn10300 because it drives the same hardware as the original rtc.c driver, and the newer rtc-generic.c or rtc-cmos.c drivers on architectures that use the asm-generic/rtc.h header. I assume it was initially only added for completeness when the mn10300 port was done, but the older rtc.c driver was always used instead. We can also stop include asm-generic/rtc.h now, because we just call mc146818_set_time() directly. It would be nice to change the architecture to use the rtc-cmos driver next, and remove support for the old rtc driver as well. [linux@roeck-us.net: Add missing include file to proc-init.c] Signed-off-by: Arnd Bergmann Signed-off-by: Guenter Roeck Acked-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni

exit_thread: accept a task parameter to be exited

2016-05-21T00:58:30+00:00

We need to call exit_thread from copy_process in a fail path. So make it accept task_struct as a parameter. [v2] * s390: exit_thread_runtime_instr doesn't make sense to be called for non-current tasks. * arm: fix the comment in vfp_thread_copy * change 'me' to 'tsk' for task_struct * now we can change only archs that actually have exit_thread [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jiri Slaby Cc: "David S. Miller" Cc: "H. Peter Anvin" Cc: "James E.J. Bottomley" Cc: Aurelien Jacquiot Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Chen Liqin Cc: Chris Metcalf Cc: Chris Zankel Cc: David Howells Cc: Fenghua Yu Cc: Geert Uytterhoeven Cc: Guan Xuetao Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ivan Kokshaysky Cc: James Hogan Cc: Jeff Dike Cc: Jesper Nilsson Cc: Jiri Slaby Cc: Jonas Bonn Cc: Koichi Yasutake Cc: Lennox Wu Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Mikael Starvik Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Rich Felker Cc: Richard Henderson Cc: Richard Kuo Cc: Richard Weinberger Cc: Russell King Cc: Steven Miao Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds