linux.git/drivers/bluetooth/Makefile, branch master

Makefile: drop -D__CHECK_ENDIAN__ from cflags

2016-12-15T22:13:43+00:00

That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin Acked-by: Kalle Valo Acked-by: Marcel Holtmann Acked-by: Marc Kleine-Budde Acked-by: Greg Kroah-Hartman Acked-by: Arend van Spriel

Bluetooth: hci_uart: Add Marvell support

2016-09-19T18:32:03+00:00

This patch introduces support for Marvell Bluetooth controller over UART (8897 for now). In order to send the final firmware at full speed, a helper firmware is firstly sent. Firmware download is driven by the controller which sends request firmware packets (including expected size). This driver is a global rework of the one proposed by Amitkumar Karwar . Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver

2016-09-19T18:19:34+00:00

The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson Signed-off-by: Bjorn Andersson Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: Add Intel/AG6xx support

2016-02-24T15:34:23+00:00

This driver implements support for iBT2.1 Bluetooth controller embedded in the AG620 communication combo. The controller needs to be configured with bddata and can be patched with a binary patch file (pbn). These operations are performed in manufacturing mode. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: hciuart: Add support QCA chipset for UART

2015-08-10T21:52:20+00:00

QCA61x4 chips have supported sleep feature using In-Band-Sleep commands to enable sleep feature based on H4 protocol. After sending patch/nvm configuration is done, IBS mode will be up and running Signed-off-by: Ben Young Tae Kim Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Introduce generic QCA ROME support

2015-08-10T21:52:20+00:00

This is for supporting BT for QCA ROME with vendor specific HCI commands and initialization on the chip. This will have USB/UART implementation both, but for now, adding UART vendor specific commands to patch downloading and set Bluetooth device address using vendor specific command. Signed-off-by: Ben Young Tae Kim Signed-off-by: Marcel Holtmann

Bluetooth: btrtl: Create separate module for Realtek BT driver

2015-05-14T10:04:12+00:00

As already done for btintel and btbcm export setup as separate function in a vendor-specific module to hold all the Realtek specific commands. Signed-off-by: Carlo Caione Signed-off-by: Marcel Holtmann

Bluetooth: btintel: Introduce generic Intel Bluetooth support

2015-04-07T16:48:21+00:00

The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support

2015-04-07T16:47:11+00:00

The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: hci_uart: Add support Broadcom address configuration

2015-04-07T16:47:08+00:00

When using vendor detection, this adds support for the Broadcom specific address configuration command. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg