linux.git/drivers/bus/Makefile, branch master

Merge tag 'tegra-for-4.10-bus' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

2016-11-19T02:32:57+00:00

bus: Add Tegra GMI support This provides a driver to enable the use of the Generic Memory Interface found on Tegra SoCs that can host various types of high-speed devices. * tag 'tegra-for-4.10-bus' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: bus: Add support for Tegra Generic Memory Interface dt/bindings: Add bindings for Tegra GMI controller Signed-off-by: Olof Johansson

bus: Add support for Tegra Generic Memory Interface

2016-11-15T16:27:53+00:00

The Generic Memory Interface bus can be used to connect high-speed devices such as NOR flash, FPGAs, DSPs... Signed-off-by: Mirza Krak Tested-by: Marcel Ziswiler Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board Acked-by: Jon Hunter [treding@nvidia.com: symmetry and coding style OCD] Signed-off-by: Thierry Reding

bus: davinci: add support for da8xx bus master priority control

2016-11-14T11:50:29+00:00

Create the driver for the da8xx master peripheral priority configuration and implement support for writing to the three Master Priority registers on da850 SoCs. Reviewed-by: Kevin Hilman Acked-by: Rob Herring Signed-off-by: Bartosz Golaszewski [nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori

bus: qcom: add EBI2 driver

2016-09-08T13:27:05+00:00

This adds a driver for the Qualcomm External Bus Interface EBI2 found in the MSM8660 and APQ8060 SoCs (at least). This was tested with the SMSC9112 ethernet on the APQ8060 Dragonboard sitting on top of the SLOW CS2. Some of my understanding if very vague and based on guesses and extrapolations: the documentation in APQ8060 Qualcomm Application Processor User Guide 80-N7150-14 Rev. A describes select features but does not document the register bit fields. Signed-off-by: Linus Walleij

bus: Add support for Tegra ACONNECT

2016-07-01T14:35:43+00:00

Add a bus driver for the Tegra ACONNECT which is used to interface to various devices within the Audio Processing Engine (APE). The purpose of the bus driver is to register child devices that are accessed via the ACONNECT bus and through the device parent child relationship, ensure that the appropriate power domain and clocks are enabled for the ACONNECT when any of the child devices are active. Hence, the ACONNECT driver simply enables runtime-pm for the ACONNECT device so that when a child device is resumed, it will enable the power-domain and clocks associated with the ACONNECT. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding

bus: uniphier-system-bus: add UniPhier System Bus driver

2015-12-22T19:22:39+00:00

The UniPhier System Bus is an external bus that connects on-board devices to the UniPhier SoC. Each bank (chip select) is dynamically mapped to the CPU-viewed address base via the bus controller. The bus controller must be configured before any access to the bus. This driver parses the "ranges" property of the System Bus node and initialized the bus controller. After the bus becomes ready, devices below it are populated. Note: Each bank can be mapped anywhere in the supported address space; there is nothing preventing us from assigning bank 0 on 0x42000000, 0x43000000, or anywhere as long as such region is not used by others. So, the "ranges" is just one possible software configuration, which does not seem to fit in device tree because device tree is a hardware description language. However, of_translate_address() requires "ranges" in every bus node between CPUs and device mapped on the CPU address space. In other words, "ranges" properties must be statically defined in device tree. After some discussion, I decided the dynamic address reassignment by the driver is too bothersome. Instead, the device tree should provide a reasonable translation setup that the OS can rely on. Signed-off-by: Masahiro Yamada Acked-by: Rob Herring Acked-by: Arnd Bergmann Signed-off-by: Olof Johansson

bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus

2015-10-26T01:11:58+00:00

Reduced Serial Bus (RSB) is an Allwinner proprietery interface used to communicate with PMICs and other peripheral ICs. RSB is a two-wire push-pull serial bus that supports 1 master device and up to 15 active slave devices. Signed-off-by: Chen-Yu Tsai Reviewed-by: Mark Brown Acked-by: Arnd Bergmann Signed-off-by: Maxime Ripard Signed-off-by: Olof Johansson

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-04-22T16:18:17+00:00

Pull ARM SoC driver updates from Olof Johansson: "Driver updates for v4.1. Some of these are for drivers/soc, where we find more and more SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. The larger parts of this branch are: - MediaTek support for their PMIC wrapper interface, a high-level interface for talking to the system PMIC over a dedicated I2C interface. - Qualcomm SCM driver has been moved to drivers/firmware. It's used for CPU up/down and needs to be in a shared location for arm/arm64 common code. - cleanup of ARM-CCI PMU code. - another set of cleanusp to the OMAP GPMC code" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) soc/mediatek: Remove unused variables clocksource: atmel-st: select MFD_SYSCON soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs arm-cci: Fix CCI PMU event validation arm-cci: Split the code for PMU vs driver support arm-cci: Get rid of secure transactions for PMU driver arm-cci: Abstract the CCI400 PMU specific definitions arm-cci: Rearrange code for splitting PMU vs driver code drivers: cci: reject groups spanning multiple HW PMUs ARM: at91: remove useless include clocksource: atmel-st: remove mach/hardware dependency clocksource: atmel-st: use syscon/regmap ARM: at91: time: move the system timer driver to drivers/clocksource ARM: at91: properly initialize timer ARM: at91: at91rm9200: remove deprecated arm_pm_restart watchdog: at91rm9200: implement restart handler watchdog: at91rm9200: use the system timer syscon mfd: syscon: Add atmel system timer registers definition ARM: at91/dt: declare atmel,at91rm9200-st as a syscon soc: qcom: gsbi: Add support for ADM CRCI muxing ...

MIPS: Add CDMM bus support

2015-03-31T10:04:12+00:00

Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan Cc: Greg Kroah-Hartman Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle

drivers: bus: Add Simple Power-Managed Bus Driver

2015-02-23T21:36:18+00:00

Add a driver for transparent busses that don't need a real driver, but where the bus controller is part of a PM domain, or under the control of a functional clock. Typically, the bus controller's PM domain and/or clock must be enabled for child devices connected to the bus (either on-SoC or externally) to function. Hence the sole purpose of this driver is to enable its clock and PM domain (if exist(s)), which are specified in the DT and managed from platform and PM domain code, and to probe for child devices. Due to the child-parent relationship with devices connected to the bus, PM domain and clock state transitions are handled in the correct order. Signed-off-by: Geert Uytterhoeven Tested-by: Ulrich Hecht Reviewed-by: Kevin Hilman Signed-off-by: Simon Horman