linux.git/drivers/hid, branch master

HID: cp2112: fix gpio-callback error handling

2017-01-31T11:59:33+00:00

In case of a zero-length report, the gpio direction_input callback would currently return success instead of an errno. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable # 4.9 Signed-off-by: Johan Hovold Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: cp2112: fix sleep-while-atomic

2017-01-31T11:59:32+00:00

A recent commit fixing DMA-buffers on stack added a shared transfer buffer protected by a spinlock. This is broken as the USB HID request callbacks can sleep. Fix this up by replacing the spinlock with a mutex. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable # 4.9 Signed-off-by: Johan Hovold Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: hid-lg: Fix immediate disconnection of Logitech Rumblepad 2

2017-01-26T20:58:16+00:00

With NOGET quirk Logitech F510 is now fully workable in dinput mode including rumble effects (according to fftest). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117091 [jkosina@suse.cz: fix patch format] Signed-off-by: Ardinartsev Nikita Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: usbhid: Quirk a AMI virtual mouse and keyboard with ALWAYS_POLL

2017-01-26T20:53:26+00:00

Quirking the following AMI USB device with ALWAYS_POLL fixes an AMI virtual keyboard and mouse from not responding and timing out when it is attached to a ppc64el Power 8 system and when we have some rapid open/closes on the mouse device. usb 1-3: new high-speed USB device number 2 using xhci_hcd usb 1-3: New USB device found, idVendor=046b, idProduct=ff01 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Virtual Hub usb 1-3: Manufacturer: American Megatrends Inc. usb 1-3: SerialNumber: serial usb 1-3.3: new high-speed USB device number 3 using xhci_hcd usb 1-3.3: New USB device found, idVendor=046b, idProduct=ff31 usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.3: Product: Virtual HardDisk Device usb 1-3.3: Manufacturer: American Megatrends Inc. usb 1-3.4: new low-speed USB device number 4 using xhci_hcd usb 1-3.4: New USB device found, idVendor=046b, idProduct=ff10 usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.4: Product: Virtual Keyboard and Mouse usb 1-3.4: Manufacturer: American Megatrends Inc. With the quirk I have not been able to trigger the issue with half an hour of saturation soak testing. Signed-off-by: Colin Ian King Signed-off-by: Jiri Kosina

HID: wacom: Fix poor prox handling in 'wacom_pl_irq'

2017-01-26T20:51:10+00:00

Commit 025bcc1 performed cleanup work on the 'wacom_pl_irq' function, making it follow the standards used in the rest of the codebase. The change unintiontionally allowed the function to send input events from reports that are not marked as being in prox. This can cause problems as the report values for X, Y, etc. are not guaranteed to be correct. In particular, occasionally the tablet will send a report with these values set to zero. If such a report is received it can caus an unexpected jump in the XY position. This patch surrounds more of the processing code with a proximity check, preventing these zeroed reports from overwriting the current state. To be safe, only the tool type and ABS_MISC events should be reported when the pen is marked as being out of prox. Fixes: 025bcc1540 ("HID: wacom: Simplify 'wacom_pl_irq'") Signed-off-by: Jason Gerecke Reviewed-by: Ping Cheng Signed-off-by: Jiri Kosina

HID: wacom: Fix sibling detection regression

2017-01-19T13:19:25+00:00

Commit 345857b ("HID: wacom: generic: Add support for sensor offsets") included a change to the operation and location of the call to 'wacom_add_shared_data' in 'wacom_parse_and_register'. The modifications included moving it higher up so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This was done to prevent a crash that would have occured when the report containing tablet offsets was fed into the driver with 'wacom_hid_report_raw_event' (specifically: the various 'wacom_wac_*_report' functions were written with the assumption that they would only be called once tablet setup had completed; 'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet allocated). Moving the call to 'wacom_add_shared_data' effectively prevented the crash but also broke the sibiling detection code which assumes that the HID descriptor has been read and the various device_type flags set. To fix this situation, we restore the original 'wacom_add_shared_data' operation and location and instead implement an alternative change that can also prevent the crash. Specifically, we notice that the report functions mentioned above expect to be called only for input reports. By adding a check, we can prevent feature reports (such as the offset report) from causing trouble. Fixes: 345857bb49 ("HID: wacom: generic: Add support for sensor offsets") Signed-off-by: Jason Gerecke Tested-by: Ping Cheng Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: corsair: fix control-transfer error handling

2017-01-13T10:59:32+00:00

Make sure to check for short control transfers in order to avoid parsing uninitialised buffer data and leaking it to user space. Note that the backlight and macro-mode buffer constraints are kept as loose as possible in order to avoid any regressions should the current buffer sizes be larger than necessary. Fixes: 6f78193ee9ea ("HID: corsair: Add Corsair Vengeance K90 driver") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Jiri Kosina

HID: corsair: fix DMA buffers on stack

2017-01-13T10:59:31+00:00

Not all platforms support DMA to the stack, and specifically since v4.9 this is no longer supported on x86 with VMAP_STACK either. Note that the macro-mode buffer was larger than necessary. Fixes: 6f78193ee9ea ("HID: corsair: Add Corsair Vengeance K90 driver") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Jiri Kosina

HID: i2c-hid: Add sleep between POWER ON and RESET

2017-01-11T20:55:35+00:00

Support for the Asus Touchpad was recently added. It turns out this device can fail initialisation (and become unusable) when the RESET command is sent too soon after the POWER ON command. Unfortunately the i2c-hid specification does not specify the need for a delay between these two commands. But it was discovered the Windows driver has a 1ms delay. As a result, this patch modifies the i2c-hid module to add a sleep inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms. See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further details. Signed-off-by: Brendan McGrath Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: hid-cypress: validate length of report

2017-01-06T15:06:43+00:00

Make sure we have enough of a report structure to validate before looking at it. Reported-by: Benoit Camredon Tested-by: Benoit Camredon Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jiri Kosina