linux.git/drivers/i2c, branch master

i2c: piix4: Request the SMBUS semaphore inside the mutex

2017-02-09T16:13:01+00:00

SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid multiple buses accessing to the semaphore at the same time. Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC") Reported-by: Jean Delvare Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang

i2c: piix4: Fix request_region size

2017-02-09T16:10:38+00:00

Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we are using the SMBSLVCNT register at offset 0x8. We need to request it. Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC") Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang

i2c: imx-lpi2c: add VLLS mode support

2017-01-25T23:24:23+00:00

When system enters VLLS mode, module power is turned off. As a result, all registers are reset to HW default value. After exiting VLLS mode, registers are still in default mode. As a result, the pinctrl settings are incorrect, which will affect the module function. The patch recovers the pinctrl setting when exit VLLS mode. Signed-off-by: Gao Pan Reviewed-by: Vladimir Zapolskiy [wsa: added missing include] Signed-off-by: Wolfram Sang

i2c: i2c-cadence: Initialize configuration before probing devices

2017-01-25T21:07:40+00:00

The cadence I2C driver calls cdns_i2c_writereg(..) to setup a workaround in the controller, but did so after calling i2c_add_adapter() which starts probing devices on the bus. Change the order so that the configuration is completely finished before using the adapter. Signed-off-by: Mike Looijmans Signed-off-by: Wolfram Sang

i2c: piix4: Avoid race conditions with IMC

2017-01-12T19:52:12+00:00

On AMD's SB800 and upwards, the SMBus is shared with the Integrated Micro Controller (IMC). The platform provides a hardware semaphore to avoid race conditions among them. (Check page 288 of the SB800-Series Southbridges Register Reference Guide http://support.amd.com/TechDocs/45482.pdf) Without this patch, many access to the SMBus end with an invalid transaction or even with the bus stalled. Reported-by: Alexandre Desnoyers Signed-off-by: Ricardo Ribalda Delgado Reviewed-by: Andy Shevchenko : Signed-off-by: Wolfram Sang

i2c: fix spelling mistake: "insufficent" -> "insufficient"

2017-01-12T19:24:43+00:00

Trivial fix to spelling mistake in WARN message, insufficient has an insufficient number of i's in the spelling. Signed-off-by: Colin Ian King Signed-off-by: Wolfram Sang

i2c: print correct device invalid address

2017-01-12T19:06:15+00:00

In of_i2c_register_device(), when the check for device address validity fails we print the info.addr, which has not been assigned properly. Fix this by printing the actual invalid address. Signed-off-by: John Garry Reviewed-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing") Cc: stable@kernel.org

i2c: do not enable fall back to Host Notify by default

2017-01-12T19:06:15+00:00

Falling back unconditionally to HostNotify as primary client's interrupt breaks some drivers which alter their functionality depending on whether interrupt is present or not, so let's introduce a board flag telling I2C core explicitly if we want wired interrupt or HostNotify-based one: I2C_CLIENT_HOST_NOTIFY. For DT-based systems we introduce "host-notify" property that we convert to I2C_CLIENT_HOST_NOTIFY board flag. Tested-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Acked-by: Pali Rohár Acked-by: Rob Herring Signed-off-by: Wolfram Sang

i2c: fix kernel memory disclosure in dev interface

2017-01-12T19:06:10+00:00

i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by: Vlad Tsyrklevich Signed-off-by: Wolfram Sang Cc: stable@kernel.org

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds