linux.git/drivers/net, branch bh1745

cpumask: fix incorrect cpumask scanning result checks

2023-03-06T20:15:13+00:00

It turns out that commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") exposed a number of cases of drivers not checking the result of "cpumask_next()" and friends correctly. The documented correct check for "no more cpus in the cpumask" is to check for the result being equal or larger than the number of possible CPU ids, exactly _because_ we've always done those constant-sized cpumask scans using a widened type before. So the return value of a cpumask scan should be checked with if (cpu >= nr_cpu_ids) ... because the cpumask scan did not necessarily stop exactly *at* that maximum CPU id. But a few cases ended up instead using checks like if (cpu == nr_cpumask_bits) ... which used that internal "widened" number of bits. And that used to work pretty much by accident (ok, in this case "by accident" is simply because it matched the historical internal implementation of the cpumask scanning, so it was more of a "intentionally using implementation details rather than an accident"). But the extended constant-sized optimizations then did that internal implementation differently, and now that code that did things wrong but matched the old implementation no longer worked at all. Which then causes subsequent odd problems due to using what ends up being an invalid CPU ID. Most of these cases require either unusual hardware or special uses to hit, but the random.c one triggers quite easily. All you really need is to have a sufficiently small CONFIG_NR_CPUS value for the bit scanning optimization to be triggered, but not enough CPUs to then actually fill that widened cpumask. At that point, the cpumask scanning will return the NR_CPUS constant, which is _not_ the same as nr_cpumask_bits. This just does the mindless fix with sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/' to fix the incorrect uses. The ones in the SCSI lpfc driver in particular could probably be fixed more cleanly by just removing that repeated pattern entirely, but I am not emptionally invested enough in that driver to care. Reported-and-tested-by: Guenter Roeck Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/ Reported-and-tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/ Reported-by: Vernon Yang Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/ Cc: Yury Norov Cc: Jason A. Donenfeld Signed-off-by: Linus Torvalds

Merge tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-02-27T22:05:08+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...

net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard

2023-02-27T19:41:49+00:00

Without proper initialization, "changed" returned random numbers and caused interface initialization failures. Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Reported-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Oleksij Rempel Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

xen-netback: remove unused variables pending_idx and index

2023-02-27T19:28:20+00:00

building with gcc and W=1 reports drivers/net/xen-netback/netback.c:886:21: error: variable ‘pending_idx’ set but not used [-Werror=unused-but-set-variable] 886 | u16 pending_idx; | ^~~~~~~~~~~ pending_idx is not used so remove it. Since index was only used to set pending_idx, remove index as well. Signed-off-by: Tom Rix Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com Signed-off-by: Jakub Kicinski

Merge tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2023-02-27T18:36:36+00:00

Kalle Valo says: ==================== wireless fixes for v6.3 First set of fixes for v6.3. We have only three oneliners. The most important one is the patch reducing warnings about the Wireless Extensions usage, reported by Linus. * tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue wifi: ath11k: allow system suspend to survive ath11k ==================== Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-27T18:04:49+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...

net: dsa: ocelot_ext: remove unnecessary phylink.h include

2023-02-26T18:41:33+00:00

During review of ocelot_ext, it created a private phylink instance that wasn't necessary. This was removed for subsequent postings, but the include file seems to have been left behind. Remove it. Signed-off-by: Russell King (Oracle) Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: mscc: ocelot: fix duplicate driver name error

2023-02-26T18:31:37+00:00

When compiling a kernel which has both CONFIG_NET_DSA_MSCC_OCELOT_EXT and CONFIG_MSCC_OCELOT_SWITCH enabled, the following error message will be printed: [ 5.266588] Error: Driver 'ocelot-switch' is already registered, aborting... Rename the ocelot_ext.c driver to "ocelot-ext-switch" to avoid the name duplication, and update the mfd_cell entry for its resources. Fixes: 3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: felix: fix internal MDIO controller resource length

2023-02-26T18:31:37+00:00

The blamed commit did not properly convert the resource start/end format into the DEFINE_RES_MEM_NAMED() start/length format, resulting in a resource for vsc9959_imdio_res which is much longer than expected: $ cat /proc/iomem 1f8000000-1f815ffff : pcie@1f0000000 1f8140000-1f815ffff : 0000:00:00.5 1f8148030-1f815006f : imdio vs (correct) $ cat /proc/iomem 1f8000000-1f815ffff : pcie@1f0000000 1f8140000-1f815ffff : 0000:00:00.5 1f8148030-1f814803f : imdio Luckily it's not big enough to exceed the size of the parent resource (pci_resource_end(pdev, VSC9959_IMDIO_PCI_BAR)), and it doesn't overlap with anything else that the Linux driver uses currently, so the larger than expected size isn't a practical problem that I can see. Although it is clearly wrong in the /proc/iomem output. Fixes: 044d447a801f ("net: dsa: felix: use DEFINE_RES_MEM_NAMED for resources") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: seville: ignore mscc-miim read errors from Lynx PCS

2023-02-26T18:31:37+00:00

During the refactoring in the commit below, vsc9953_mdio_read() was replaced with mscc_miim_read(), which has one extra step: it checks for the MSCC_MIIM_DATA_ERROR bits before returning the result. On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they are organized in 2 groups. First group responds to MDIO addresses 4-7 because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double checked that these values are correctly set in the SERDES, as well as PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01. mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR As can be seen, the data in MIIM_DATA is still valid despite having the MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") was ignoring these bits, perhaps deliberately (although unbeknownst to me). This is an old IP and the hardware team cannot seem to be able to help me track down a plausible reason for these failures. I'll keep investigating, but in the meantime, this is a direct regression which must be restored to a working state. The only thing I can do is keep ignoring the errors as before. Fixes: b99658452355 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller