linux.git/drivers/pinctrl/intel, branch master

pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler

2017-01-30T14:53:57+00:00

According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: baytrail: Debounce register is one per community

2017-01-30T14:48:15+00:00

Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan Signed-off-by: Andy Shevchenko Reviewed-by: Jean Delvare Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: baytrail: Rectify debounce support (part 2)

2017-01-30T14:46:33+00:00

The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko Reviewed-by: Jean Delvare Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: intel: merrifield: Add missed check in mrfld_config_set()

2017-01-30T08:15:10+00:00

Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij

pinctrl: baytrail: Do not add all GPIOs to IRQ domain

2017-01-12T07:11:56+00:00

When DIRECT_IRQ_EN is set, the pin is routed directly to the IO-APIC bypassing the GPIO driver completely. However, the mask register is still used to determine if the pin is supposed to generate IRQ or not. So with commit 3ae02c14d964 the IRQ core masks all IRQs (because of handle_bad_irq()) the pin connected to the touchscreen gets masked as well and hence no interrupts. To make this all work as expected we do not add those GPIOs to the IRQ domain that can actually propagate interrupts. Fixes: 3ae02c14d964 ("pinctrl: intel: set default handler to be handle_bad_irq()") Reported-by: Robert R. Howell Suggested-by: Mika Westerberg Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: baytrail: Rectify debounce support

2017-01-11T13:08:53+00:00

The commit 658b476c742f ("pinctrl: baytrail: Add debounce configuration") implements debounce for Baytrail pin control, but seems wasn't tested properly. The register which keeps debounce value is separated from the configuration one. Writing wrong values to the latter will guarantee wrong behaviour of the driver and even might break something physically. Besides above there is missed case how to disable it, which is actually done through the bit in configuration register. Rectify implementation here by using proper register for debounce value. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: intel: Set pin direction properly

2017-01-11T12:49:05+00:00

There are two bits in the PADCFG0 register to configure direction, one per TX/RX buffers. For now we wrongly assume that the GPIO is always requested before it is being used, which is not true when the GPIO is used through irqchip. In this case the GPIO is never requested and we never enable RX buffer for it. Fix this by setting both bits accordingly. Reported-by: Jarkko Nikula Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij

pinctrl: broxton: Use correct PADCFGLOCK offset

2017-01-11T12:47:11+00:00

PADCFGLOCK (and PADCFGLOCK_TX) offset in Broxton actually starts at 0x060 and not 0x090 as used in the driver. Fix it to use the correct offset. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2016-12-13T15:59:10+00:00

Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...

pinctrl: intel: set default handler to be handle_bad_irq()

2016-12-07T14:26:59+00:00

We switch the default handler to be handle_bad_irq() instead of handle_simple_irq() (which was not correct anyway). Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij