linux.git/drivers/pinctrl/stm32, branch master

Merge tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2016-12-13T15:59:10+00:00

Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...

pinctrl: stm32: use builtin_platform_driver

2016-11-22T08:57:39+00:00

Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang Signed-off-by: Linus Walleij

pinctrl: stm32: remove dependency with interrupt controller

2016-10-31T20:25:15+00:00

This patch allows to probe stm32 pinctrl driver even if no interrupt controller is defined to manage gpio irqs. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij

pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency

2016-09-15T12:13:10+00:00

The newly added irqchip support for the stm32 pinctrl driver uses hierarchical IRQ domains as provided by the NVIC primary irqchip. This works great for any configuration that may be relevant on stm32, but when doing compile-testing (randconfig), we can enable it without NVIC or any other primary irqchip that enables IRQ_DOMAIN_HIERARCHY: drivers/pinctrl/stm32/pinctrl-stm32.c:212:13: error: 'irq_chip_eoi_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:213:20: error: 'irq_chip_mask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:214:20: error: 'irq_chip_unmask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:215:20: error: 'irq_chip_set_type_parent' undeclared here (not in a function) This adds a Kconfig dependency to limit compile-testing to configurations that have IRQ_DOMAIN_HIERARCHY already enabled. It's not obvious whether we should use 'depends on' or 'select' here, I think either one works, with 'depends on' being more intuitive, while 'select' would be less likely to cause dependency loops. Signed-off-by: Arnd Bergmann Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Linus Walleij

pinctrl: stm32: constify gpio_chip structures

2016-09-13T08:37:37+00:00

These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // Signed-off-by: Julia Lawall Signed-off-by: Linus Walleij

pinctrl: Add IRQ support to STM32 gpios

2016-09-13T08:13:01+00:00

This patch adds IRQ support to STM32 gpios. The EXTI controller has 16 lines dedicated to GPIOs. EXTI line n can be connected to only line n of one of the GPIO ports, for example EXTI0 can be connected to either PA0, or PB0, or PC0... This port selection is done by specifying the port number into System Config registers. Signed-off-by: Maxime Coquelin Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij

pinctrl: Add STM32F746 MCU support

2016-07-11T12:35:44+00:00

This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Maxime Coquelin Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij

pinctrl: stm32: factorize stm32_pconf_input/output_get()

2016-05-31T08:06:12+00:00

As these 2 functions code are 95% similar, factorize them. Signed-off-by: Patrice Chotard Acked-by: Maxime Coquelin Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2016-05-19T19:50:56+00:00

Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...

pinctrl: stm32: Implement .pin_config_dbg_show()

2016-05-10T11:48:26+00:00

Signed-off-by: Patrice Chotard Signed-off-by: Linus Walleij