linux.git/drivers/s390/char, branch vm-bind

s390/sclp: Fix typo in comments

2022-06-30T17:40:36+00:00

Remove the repeated word 'and' from comments Signed-off-by: Jiang Jian Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20220622142713.14187-1-jiangjian@cdjrlc.com Signed-off-by: Alexander Gordeev

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2022-05-26T21:20:14+00:00

Pull kvm updates from Paolo Bonzini: "S390: - ultravisor communication device driver - fix TEID on terminating storage key ops RISC-V: - Added Sv57x4 support for G-stage page table - Added range based local HFENCE functions - Added remote HFENCE functions based on VCPU requests - Added ISA extension registers in ONE_REG interface - Updated KVM RISC-V maintainers entry to cover selftests support ARM: - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes x86: - New ioctls to get/set TSC frequency for a whole VM - Allow userspace to opt out of hypercall patching - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr AMD SEV improvements: - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES - V_TSC_AUX support Nested virtualization improvements for AMD: - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) - Allow AVIC to co-exist with a nested guest running - Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support - PAUSE filtering for nested hypervisors Guest support: - Decoupling of vcpu_is_preempted from PV spinlocks" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits) KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest KVM: selftests: x86: Sync the new name of the test case to .gitignore Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND x86, kvm: use correct GFP flags for preemption disabled KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer x86/kvm: Alloc dummy async #PF token outside of raw spinlock KVM: x86: avoid calling x86 emulator without a decoded instruction KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) s390/uv_uapi: depend on CONFIG_S390 KVM: selftests: x86: Fix test failure on arch lbr capable platforms KVM: LAPIC: Trace LAPIC timer expiration on every vmentry KVM: s390: selftest: Test suppression indication on key prot exception KVM: s390: Don't indicate suppression on dirtying, failing memop selftests: drivers/s390x: Add uvdevice tests drivers/s390/char: Add Ultravisor io device MAINTAINERS: Update KVM RISC-V entry to cover selftests support RISC-V: KVM: Introduce ISA extension register RISC-V: KVM: Cleanup stale TLB entries when host CPU changes RISC-V: KVM: Add remote HFENCE functions based on VCPU requests ...

s390/uv_uapi: depend on CONFIG_S390

2022-05-25T09:11:36+00:00

Signed-off-by: Paolo Bonzini

drivers/s390/char: Add Ultravisor io device

2022-05-20T14:38:35+00:00

This patch adds a new miscdevice to expose some Ultravisor functions to userspace. Userspace can send IOCTLs to the uvdevice that will then emit a corresponding Ultravisor Call and hands the result over to userspace. The uvdevice is available if the Ultravisor Call facility is present. Userspace can call the Retrieve Attestation Measurement Ultravisor Call using IOCTLs on the uvdevice. The uvdevice will do some sanity checks first. Then, copy the request data to kernel space, build the UVCB, perform the UV call, and copy the result back to userspace. Signed-off-by: Steffen Eiden Reviewed-by: Janosch Frank Reviewed-by: Claudio Imbrenda Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/ Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com> Signed-off-by: Janosch Frank (whitespace and tristate fixes, pick)

s390/consoles: improve panic notifiers reliability

2022-05-06T18:45:13+00:00

Currently many console drivers for s390 rely on panic/reboot notifiers to invoke callbacks on these events. The panic() function disables local IRQs, secondary CPUs and preemption, so callbacks invoked on panic are effectively running in atomic context. Happens that most of these console callbacks from s390 doesn't take the proper care with regards to atomic context, like taking spinlocks that might be taken in other function/CPU and hence will cause a lockup situation. The goal for this patch is to improve the notifiers reliability, acting on 4 console drivers, as detailed below: (1) con3215: changed a regular spinlock to the trylock alternative. (2) con3270: also changed a regular spinlock to its trylock counterpart, but here we also have another problem: raw3270_activate_view() takes a different spinlock. So, we worked a helper to validate if this other lock is safe to acquire, and if so, raw3270_activate_view() should be safe. Notice though that there is a functional change here: it's now possible to continue the notifier code [reaching con3270_wait_write() and con3270_rebuild_update()] without executing raw3270_activate_view(). (3) sclp: a global lock is used heavily in the functions called from the notifier, so we added a check here - if the lock is taken already, we just bail-out, preventing the lockup. (4) sclp_vt220: same as (3), a lock validation was added to prevent the potential lockup problem. Besides (1)-(4), we also removed useless void functions, adding the code called from the notifier inside its own body, and changed the priority of such notifiers to execute late, since they are "heavyweight" for the panic environment, so we aim to reduce risks here. Changed return values to NOTIFY_DONE as well, the standard one. Signed-off-by: Guilherme G. Piccoli Link: https://lore.kernel.org/r/20220427224924.592546-14-gpiccoli@igalia.com Signed-off-by: Heiko Carstens

s390/sclp: add detection of IPL-complete-control facility

2022-04-25T11:54:12+00:00

The presence of the IPL-complete-control facility can be derived from the hypervisor's SCLP info response. Signed-off-by: Alexander Egorenkov Reviewed-by: Christian Borntraeger Signed-off-by: Heiko Carstens

s390: cleanup timer API use

2022-03-27T20:18:39+00:00

cleanup the s390's use of the timer API - del_timer() contains timer_pending() condition - mod_timer(timer, expires) is equivalent to: del_timer(timer); timer->expires = expires; add_timer(timer); If the timer is inactive it will be activated, using add_timer() on condition !timer_pending(&private->timer) is redundant. Just cleanup, no logic change. Signed-off-by: Yu Liao Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/tape: use bitwise instead of arithmetic operator for flags

2022-03-27T20:18:38+00:00

This silences the following coccinelle warning: drivers/s390/char/tape_34xx.c:360:38-39: WARNING: sum of probable bitmasks, consider | Signed-off-by: Haowen Bai Link: https://lore.kernel.org/r/1647334421-29989-1-git-send-email-baihaowen@meizu.com Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/extable: move EX_TABLE define to asm-extable.h

2022-03-07T23:33:00+00:00

Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h which is a lot less generic than the current linkage.h. Also make sure that all files which contain EX_TABLE usages actually include the new header file. This should make sure that the files always compile and there won't be any random compile breakage due to other header file dependencies. Reviewed-by: Alexander Gordeev Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/maccess: fix semantics of memcpy_real() and its callers

2022-02-09T21:56:04+00:00

There is a confusion with regard to the source address of memcpy_real() and calling functions. While the declared type for a source assumes a virtual address, in fact it always called with physical address of the source. This confusion led to bugs in copy_oldmem_kernel() and copy_oldmem_user() functions, where __pa() macro applied mistakenly to physical addresses. It does not lead to a real issue, since virtual and physical addresses are currently the same. Fix both the bugs and memcpy_real() prototype by making type of source address consistent to the function name and the way it actually used. Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Vasily Gorbik